1461267-1

Catalog 1308242 General Purpose Relays Issued 3-03 PCB Relays OEG S Ordering Information -1 12 L M R ,000Part Number Typical B SDT Miniature PCB Relay SDT-R Ordering Information -S -1 1. Basic Series: SDT = Miniature Power PC board relay. contact rating 2. Enclosure: = Snap-on (Flux-tight)* cover. TV-5 Sand TV-8 rating n 1 form3.ATermination: (NO) contact arrangement 1 = 1 pole n Sensitive and standard coils available 5. Coil Input: L = Sensitive (250mW) L M R Part ,000 Typical Num 2. Enclosure: S = Snap-on (Flux-tight)* cover. n UL 09 = 9VDC 12 = 12VDC 12 1. Basic Series: SDT = Miniature Power PC board relay. n 10A 4. Coil Voltage: 05 = 5VDC 06 = 6VDC OEG OEG 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 24 = 24VDC 48 = 48VDC 09 = 9VDC 12 = 12VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: Typical applications M = 1 Form A, SPST-NO 24 = 24VDC 48 = 48VDC D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO Appliances, HVAC, cable TV, monitor display 7. Construction: R = New construction 7. Construction: R = New construction 8. Suffix: ,000 = Standard model VZt 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Approvals Contact Data (continued) Other Suffix = Custom m * Not suitable for immersion cleaning processes. UL E58304, TUV R50138781, VDE 40019832, CQC03001002917 TechnicalOur datadelivery. of approved types on request stock for immediate Coil versions, coil for immediate authorized distributors are more likely to maintain the following items inDC stock delivery. Our authorized distributors are more likely to ma Coil Rated Operate Release Coil Rated coil None at present. None at present. Contact Data code voltage voltage voltage resistance power Contact arrangement 1 Form A (NO) VDC VDC VDC Ω±10% mW Rated voltage 250VAC, 30VDC SDT-LMR & SDT-DMR2 Diagram (Bottom View)Dimensions Wiring Diagram (Bottom View) Outline Outline Dimensions Max. switching voltage 250VAC, 30VDC 003 3 2.25 0.3 36 250 Rated current 5 to 10A 005 5 3.75 0.5 100 250 Contact material AgSnO2 006 6 4.50 0.6 144 250 Min. recommended contact load 100mA at 5VDC 009 9 6.75 0.9 324 250 Frequency of operation 360 ops./h 012 12 9.00 1.2 576 250 Operate/release time max. .984 ± .012 15/5ms 018 18 13.50 1.8 1296 250 .984 ± .012 Electrical endurance 024 24 18.00 2.4 2304 (25.0 ±250 (25.0 ± .3) .3) SDT-LMR(2): 5A, 250VAC res, 70°C 100x103 ops. SDT-DMR TV-5, 120VAC 25x103 ops. 003 3 2.25 0.3 16.7 540 SDT-DMR(2): 10A, 250VAC res, , 70°C 100x103 ops. 005 5 3.75 0.5 46.3 540 TV-8, 120VAC 25x103 ops. 006 6 4.50 0.6 66.7 540 Contact ratings 5 to 10A 009 9 6.75 0.9 150 540 Mechanical endurance, DC coil .039 10x106 operations 012 12 9.00 1.2 267 540 .039 .018 .01 018 PC Board 18 Layout 13.50 1.8 600 (1.0) 540 (1.0) d Layout (Bottom View) (Bottom View) (.4) .02 (.4 .02 .018 .008 .018 .008 024 24 18.00 2.4 1067 540 .039 (.5) .039 (.5) (.45) (.2) (.45) (.2) (1.0) (1.0) 2 – Coil .059 DIA 236.00 – .059 DIA Data 048 48 4.8 4267 540 (1.5) (1.5) Coil voltage range 3 to 48VDC SDT-LMR2 Operative range, IEC 61810 .295 003 3 2.25 0.3 60 .3941 ± .012 .295 150 .394 ± .012 (10.0 ±E.3) (7.5) 150 (10.0 ± .3) ± .004according UL (7.5) Coil insulation.295 system Class 005 3.75 0.5 .295 ± .004 167 A 2 – .05 5 DIA (7.5 ± .1) (7.5 ± .1) (1.3)6 006 4.50 0.6 240 150 .138 ± .008 .646 ± .012 009 9 6.75 0.9 .138 150 ± .008 .646 ± .012 540 (3.5 ± .2) (16.4 ± .3) (3.5150 ± .2) (16.4 ± .3) 012 12 9.00 1.2 960 .646 ± .004 .646 ± .004 .38 ± .004 .38 ± .004 .098 .098 (16.4 ± .1) (16.4 ± .1) (3.5 ± .1) (3.5 ± .1) 018 18 13.50 1.8 2160 150 (2.5) .945 ± .012 (2.5) .945 ± .012 (24.0 ± .3) 024 24 18.00 2.4 (24.0 ± .3) 3840 150 All figures are given for coil without pre-energization, at ambient temperature +23°C Reference Data Reference Data 180 1.4 1 0 140 120 24 250VAC Resistive Maximum (540mW Coil) Operating Allowable Voltage Range Coil Voltage 100 80 250VAC Resistive (250mW Coil) 60 40 Cool Coil Hot Coil 5A Applied Pick-Up Voltage 20 16 12 Operate Time 8 Release Time 4 2 -40 -20 0 6 40 608 80 100 10120 140 12 20 0.2 Ambient Contact CurrentTemp. (A) (°C) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). pecifications and availability Dimensions are shown for Rev. 0411 bject to change.04-2011,reference purposes only. www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Oper 100 180 4 20 0 Life Expectancy Operating Coil operativeVoltage range (SDT-LMR) % of Supplying Voltage4 to Coil Operation (x 10 ) 160 Time (msec) % of Supplying Voltage to Coil Operation (x 104) 100 10 Operate Time Operate time www.tycoelectronics.com Dimensions are in inches over Datasheets product specification Technical support:and (millimeters) unless otherwise 477 tospecified. IEC 61810-1 and to be used Refer according to inside back cover. only together with the ‘Definitions’ section. 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 24 160 140 120 100 10 80 60 40 Operating Voltage Range 250VAC Resistive (250mW Coil) 250VAC Resistive Maximum (540mW Coil) Allowable Coil Voltage 20 Time (msec) Life Expectancy Operating Voltage (SDT-LMR) Electrical endurance Cool Coil Hot Coil 5A Applied Pick-Up Voltage 0 -40 -20 2 0 12 8 4 20 01 16 10 8 120 140 4 40 606 80 100 20 12 ContactTemp. Current (A) Ambient (°C) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Specifications andDimensions availabilityare shown for 1 www.tycoelectronics.com Dimensions are in in Datasheets and product data to is change. subjectreference to the purposes Datasheets, secsubject Technical support: unless4 only. product data, ‘Definitions’ (millimeters) terms of the disclaimer and all chapters of tion, application notes and all specifications Refer to inside back cover. specified. the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions CatalogCatalog 1308242 1308242 Issued 3-03 Issued 3-03 Part Number SDT B SDT B cal Part Number -S General Purpose Relays PCB Relays -1 OEG OEG 12 L M R ,000 -1 12PCB Relay L SDT-R M(Continued) R Miniature -S OEG ,000 Catalog Issue Ordering Information y. Insulation Data = 24VDC = 48VDC Typical Part Number Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil 1000Vrms 4000Vrms SDT B 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. >1.6/3.2mm 3. Termination: 1 = 1 pole 24 = 24VDC Other Data 48 = 48VDC (540mW) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter dard (540mW) Ambient temperature -30°C to +70°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Shock resistance (functional) 10g = Custom model Shock resistance (destructive) 100g Weight 11g Resistance to soldering heat THT ffix = Custom model IEC 60068-2-20 RTII: 270°C/10s RTIII: 260°C/5s kely to maintain the following items in stocktube/25 for immediate delivery. Packaging/unit pcs., carton box/1000 pcs. tray/100 pcs., carton box/1000 pcs. 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 5. Coil Input: L = Sensitive (250mW) 24 = 24VDC 48 = 48VDC D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. e likely to maintain the following items in stock for immediate delivery. Wiring Diagram (Bottom View) Our authorized distributors are more likely to maintain the followin None at present. Wiring Diagram (Bottom View) Terminal assignment Bottom view on solder pins Dimensions Outline Dimensions 2 .984 ± .012 (25.0 ± .3) .018 (.4) PC Board Layout (Bottom View) 2 – .059 DIA (1.5) 4 ± .012 0.0 ± .3) .018 (.4) .008 (.2) 2 – .05 DIA PC (1.3) (16.4 ± .1) Operate Time Life Expectancy .646 ± .004 Operation (x 104) 24 Operate Time 8 10 12 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Operate Time 8 1 0 4 2 10 © 2011 Tyco0.2 Electronics 0.4 Corporation, 0.6 0.8 a TE Connectivity Ltd. company 1.0 Coil Power (W) 6 8 Contact Current (A) 250VAC Resistive (250mW Coil) Specifications and availability subject to change. Datasheets and product specification Release Time 24 160 140 Operating 250VAC ResistiveVoltage Range 120 Coil) (540mW Operation (x 104) 0.2 according to IEC 61810-1 and 1 to be used only together 1.2 1.4 with the ‘Definitions’ 0 section. 2 Operate Time 180 250VAC 100Resistive (250mW Coil) Release Time 16 Data Operating Voltage (SDT-LMR) Life Expectancy 20 4 Time (msec) Time (msec) 12 Operate Time .394 ± .012 (10.0 ± .3) .138 ± .008 (3.5 ± .2) .098 (2.5) .945 ± .012 (24.0 ± .3) 250VAC Resistive (540mW Coil) Reference 20 16 .039 (1.0) .646 ± .012 (16.4 ± .3) .38 ± .004 (3.5 ± .1) 100(16.4 ± .1) .018 (.4) .008 (.2) .295 (7.5) .295 ± .004 (7.5 ± .1) 24 .039 (1.0) .02 (.5) (3.5 ± .1) 2 – .05 DIA (1.3) 4 nsions are in2inches over meters) unless otherwise 04-2011, Rev. 0411 fied. www.te.com 40 .018 (.45) 2 – .059 DIA (1.5) .646 ± .004 .38 ± .004 .394 ± .012 (10.0 ± .3) 08 ) .295 ± .004 Board Layout (Bottom (7.5 ± .1) View) 10 20 Maximum Allowable Coil Voltage Time (msec) PCB layout Bottom view on solder pins % of Supplying Voltage to Coil .008 (.2) 100 80 12 60 40 Cool Coil Hot Coil 5A Applied Pick-Up Voltage 16 12 Operate Time 8 4 20 Release 0 0.2 www.tycoelectronics.com-40 -20 0 20 40 60 80 100 120 140 Technical support: Datasheets and product data is subject to theTemp.Datasheets, product data, ‘Definitions’ sec477 Ambient (°C) Refer to back cover. terms of inside the disclaimer and all chapters of tion, application notes and all specifications data10is based on the max.are allowable section, at 12 subject to change. 6 Note: 8Thisavailable 4the ‘Definitions’ temperature for E type insulation coil (115°C). http://relays.te.com/definitions Contact Current (A) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 0.4 0.6 Coil Pow General Purpose Relays PCB Relays OEG Miniature PCB Relay SDT-R (Continued) Product code structure Typical product code SDT -S -1 12 D M R 2 ,000 Basic type SDT Miniature PCB Relay SDT-R Enclosure S Snap on cover Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil input D Standard (540mW) L Sensitive (250mW) Contact arrangement M 1 form A (NO) contact Design R New design Coil type Blank Standard 2 as LMR2: 150mW coil consumption as DMR2: 250mW coil consumption Suffix ,000 Standard Other types on request Product code SDT-S-105LMR,000 SDT-S-112LMR,000 SDT-S-124LMR,000 SDT-S-103DMR,000 SDT-S-105DMR,000 SDT-S-112DMR,000 SDT-S-118DMR,000 SDT-S-124DMR,000 SDT-S-148DMR,000 SDT-S-105LMR2,000 SDT-S-109LMR2,000 SDT-S-105DMR2,000 SDT-S-109DMR2,000 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Coil Coil sensitivity Design Cont.material Arrangement Coil type 5VDC Sensitive new design AgSnO2 1 form A (NO) 250mW 12VDC standard coil 24VDC 3VDC Standard 540mW coil 5VDC standard coil 12VDC 18VDC 24VDC 48VDC 5VDC Sensitive 150mW coil 9VDC 5VDC Standard 250mW coil 9VDC Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 8-1419125-1 9-1419125-9 1419126-2 1461267-1 8-1419125-0 9-1419125-7 1461267-3 1419126-1 1461023-2 8-1419125-3 9-1419125-5 9-1440002-6 9-1440002-8 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3