1461353-5

General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH n 5 to 10A rating form A (NO) and 1 form C (CO) contact arrangements n Sensitive coil available for 1 form A type n 1 Typical applications Appliances, HVAC, refrigerators, microwave ovens F_PCH_B VZ Approvals Coil Data (continued) Technical data of approved types on request Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10 % mW Sensitive type (for form A type only) 003 3 2.25 0.15 45 200 005 5 3.75 0.25 125 200 006 6 4.50 0.30 180 200 009 9 6.75 0.45 405 200 012 12 9.00 0.60 720 200 018 18 13.50 0.90 1620 200 024 24 18.00 1.20 2880 200 048 48 36.00 2.40 11520 200 VDE 119568, UL E82292, CQC08001023449 Contact Data Contact arrangement 1 Form A (NO) Rated voltage 30VDC, 277VAC Max. switching voltage 30VDC, 277VAC Rated current 5 to 10A Contact material AgSnO2 Min. recommended contact load 100mA, 5VDC Frequency of operation 360 ops./h Operate/release time max. 10/5ms Electrical endurance D type: 5A, 277VAC resistive, -30°C to +70°C100x103 ops. L type: 5A, 277VAC resistive, -30°C to +70°C 30x103 ops. D/L-WG type: 5A, 250VAC resistive, -40°C to +85°C 100x103 ops. Contact ratings Type IEC 61810 PCH-..2M-WG PCH-..D2-WG PCH-..D2M PCH-..L2M PCH-..D2 UL 508 PCH PCH Contact Load A (NO) A of C A (NO) A (NO) C (CO) 5A 250VAC res, 85°C 5A 250VAC res, 85°C 5A 250VAC res, 70°C 5A 250VAC res, 70°C 5A/3A 250VAC res, 40°C 100x103 100x103 100x103 30x103 30x103 A (NO) A (NO) 10A 125VAC res, 85°C 5A 250VAC general use, 85°C 100x103 100x103 Mechanical endurance, DC coil Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Cycles All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10 % mW Standard type 003 3 2.10 0.15 23 400 005 5 3.50 0.25 63 400 006 6 4.20 0.30 90 400 009 9 6.30 0.45 202 400 012 12 8.40 0.60 360 400 018 18 12.60 0.90 810 400 024 24 16.80 1.20 1440 400 048 48 33.60 2.40 5760 400 Reference Data Reference All figures areData given for coil without pre-energization, at ambient temperature +23°C. 10x106 operations 3 to 48VDC 2 Class F *Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW. *Above reference data isthe apply for of 1 Form C / NO contactlife. side, rated voltage: 277Vac / Coil power: 400mW. *Please contact with us about graph expected electrical *Please contact with us about the graph of expected electrical life. 12-2015, Rev. 1215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Ordering Information for Relays General Purpose Relays PCB Relays Example Part No. PCH -1 12 D 2 M H ,000 OEG 1. Basic Series PCH = Compact PCB mount typeMiniature PCB Relay PCH (Continued) 2. Poles 1= 1pole 3. Coil Voltage = 5VDC 12= 12VDC Ordering Information for Relays xample PartInsulation No. PCH05Data -1 12 D 2 M H ,000 06 =strength 6VDC 24 = 24VDC Initial dielectric = contacts 9VDC 48 = 750Vrms48VDC* between 09 open ype Ordering Information for Relays Power 4. Coil between contact and coil 4000Vrms Example Part No. = 400mW (1a,1c) Initial surge D withstand voltage = 200mW (1a) 1. Basic Series between Lcontact and coil 10000Vrms 12VDC 5. Contact Material Example Part No. PCH = Compact PCB mount type Clearance/creepage = 24VDC = AgSnO2 2. Poles between 2contact and coil NO: ≥ 4.9mm / 6.6mm 1. Basic Series = 48VDC* Contact Arrangement 1= = 1pole 6. between contact and coil CO: ≥ 4mm / 5mm PCH Compact PCB mount type blank = 1c 3. Poles Coil Voltage Tracking index of relay base 2. M = 1a 5VDC 12= 12VDC standard type PTI 175 105== 1pole Enclosure 06 = 6VDC 24 = 24VDC 7. WG txype PTI 250 3. Coil Voltage blank = Flux Proof 09 = = 9VDC 48 = 48VDC* 05 5VDC 12= 12VDC H= Wash Tight 4. Coil Power 06 = 6VDC 24 = 24VDC 8. SuffixData D == 400mW (1a,1c) Other 09 9VDC 48 = 48VDC* ,000 = EU RoHS/ELV, Standard model L= 200mW (1a) Material compliance: China RoHS, REACH, Halogen content 4. Coil Power Other 5. Contact Material refer to the Product Compliance Support Center at D= 400mW (1a,1c) Suffix = Custom model = AgSnO2 (1a) www.te.com/customersupport/rohssupportcenter L2 = 200mW Ambient temperature -40°C to +85°C 6. Contact Contact Material Arrangement 5. *Coil voltage: 48VDC only can chose 400mW type. Category of environmental protection 1c 2blank = = AgSnO 2 IEC 61810 RTII - flux tight M= 1a 6. Contact Arrangement RTIII - wash tight Terminal assignment 7. Enclosure blank = 1c Shock resistance (functional) 10g Bottom view on solder blank = pins 1a Flux Proof M = (Bottom Wiring Diagram View) Outline (mm) Shock Dimensions resistance (destructive) 100g H = Wash Tight 7. Enclosure 1a 1c*Weight 7g 11c form C (CO) 1 form A (NO) 8. Suffix blank = Flux Proof Resistance to soldering heat THT ,000 = Standard model H= Wash Tight IEC 60068-2-20 RTII: 270°C/10s Wiring Diagram (Bottom View) 8. Suffix Other RTIII: 260°C/5s Suffix== Custom model ,000 Standard model 1c 1a pcs., carton box/1000 pcs. Packaging unit tray/100 Other *Coil voltage: 48VDC only can chose 400mW type. Suffix = Custom model PCH -1 PCH -1 *Coil voltage: 48VDC only can chose 400mW type. PCB layout PC Board Layout (mm) (Bottom View) Bottom view on solder pins 1c Outline Dimensions (mm) PC Board Layout (mm) (Bottom View) 1c* 1c Outline Dimensions (mm) Dimensions 1c* W 1c W 1c 1a P 1c PC 1c 1 form C (CO) 1 form A (NO) 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm 3mm Min.: +/-0.3mm 1a *1a Outline dimensions is omitted. 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 © Copyright 2009 REV.B by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B tronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. This document is subject to change, Please call local TYCO Electronics for the latest version. 2 12-2015, Rev. 1215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH (Continued) Product code structure Typical product code PCH -1 12 D 2 H ,000 Type PCH Miniature PCB Relay PCH Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil sensitivity D Standard 400mW L 200mW (for 1 form A contact only) Contact material 2 AgSnO Contact arrangement Blank 1 form C (CO) contact M 1 form A (NO) contact Category of protection Blank Flux proof, vented cover H Wash tight, sealed plastic cover Insulation system designation Blank Class F system WG Class F system and for domestic appliances (IEC 60335-1, 4 Edition); Suffix ,000 Standard type Other types on request Product code Coil Sensitivity Cont.material Arrangement Enclosure Insulation Part number PCH-105D2H,000 5VDC Standard AgSnO2 1 form C (CO) Wash tight Class F 9-1440003-0 PCH-105L2M,000 Sensitive 1 form A (NO) Flux proof 1461352-2 PCH-105L2MH,000 Wash tight 1461353-2 PCH-105L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-2 PCH-106D2,000 6VDC Standard 1 form C (CO) Class F 9-1440003-8 PCH-109D2H,000 9VDC Wash tight 9-1440003-2 PCH-112D2,000 12VDC Flux proof 1440004 PCH-112D2H,000 Wash tight 9-1440003-3 PCH-112D2M,000 1 form A (NO) Flux proof 1461350-5 PCH-112D2M-WG Cl. F, IEC 60335-1 1721767-5 PCH-112D2-WG 1 form C (CO) 1721766-5 PCH-112L2M,000 Sensitive 1 form A (NO) Class F 1461352-5 PCH-112L2MH,000 Wash tight 1461353-5 PCH-112L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-5 PCH-124D2,000 24VDC Standard 1 form C (CO) Class F 1440004-1 PCH-124D2H,000 Wash tight 9-1440003-5 PCH-124D2M,000 1 form A (NO) Flux proof 1461350-6 PCH-124D2MH,000 Wash tight 1461351-6 PCH-124L2M,000 Sensitive Flux proof 1461352-6 PCH-124L2MH,000 Wash tight 1461353-6 PCH-124L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-6 PCH-148D2,000 48VDC Standard 1 form C (CO) Class F 1461410-2 12-2015, Rev. 1215 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3