1461403-4

Catalog 1308242 Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Issued 3-03 (PDF Rev. 11-04) OEG OEG Catalog 1308242 Cata Issued 3-03 (PDF Rev. 11-04) Issued 3-03 OEG OEG General Purpose General Purpose Relays General Purpose Relays Ordering Information Ordering Information Power PCB Relays PCB Relays OEG -SH PCB Relays OEG OJE -SH B -1 OJE 12 -SH L M-1 H12OEG F L ,095 Typical OJE H12 F L ,095 Part Number M PartHNumber F B,095 Typical Part Number B M Typical H PartFNumber ,095B Typical on Ordering Information 1. Basic Series: 1. Basic Series: oil andOJ contacts. = 4kV dielectric, coil and contacts. coil and contacts. OJE = 3kV dielectric, coil and contacts. 1. Basic Series: OJ Relay = 4kV dielectric, coil andOJ contacts. = 4kV dielectric, coil and contacts. Miniature PCB OJ/OJE Miniature PCB RelayMiniature OJ/OJE PCB Relay OJ/OJE OJE = 3kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2. Enclosure: 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. (Flux-tight)*, plastic cover. SS = Vented SH = Sealed, plastic case. SH = Sealed, plastic case. n 3 to 10A rating 3. Termination: Termination: 3. Termination: mall 3. size 1 = 1 pole 1 = 1 pole(OJ type) 1 = 1 pole size ectric 00Vrmsstrength coilnto Small contact dielectric strength (OJ type) 4. Coil Voltage: 4. Coil Voltage: 4. Coil Voltage: noptional 4000V coil= to contact dielectric strength (OJ type) =nsitive 9VDC05coil 24 rms = 24VDC 05 = 5VDC 09 = 9VDC05 = 5VDC 24 = 24VDC = 5VDC 09 9VDC 24 = 24VDC 09 = 9VDC 24 = 24VDC = 12VDC 48 = 48VDC 06 = 6VDC 12 = 12VDC 06 = n 6VDC 12 = 12VDC 48 = 48VDC 06 = 6VDC 48 = 48VDC 12 = 12VDC 48 = 48VDC Sensitive coil optional Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: 5. Coil Input/Contact Rating: W) Coil,L3A Contacts** D = Coil, Standard (450mW) Coil,D5A Contacts (450mW) Coil,L5A = Sensitive Contacts** D = Coil, Standard (450mW) Coil,D5A Contacts (450mW) = Sensitive (200mW) 3A Contacts** = Standard Contacts (200mW) Coil,L3A = Sensitive (200mW) 3A Contacts** = Standard W) Coil,H10A Contacts(450mW) Coil, 10A Contacts H = Standard (450mW) Coil,H10A Contacts(450mW) Coil, 10A Contacts = Standard = Standard nt: 6. Contact Arrangement: 6. Contact Arrangement: 6. Contact Arrangement: NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO M = 1 Form A, SPST-NO act Rating forContact Sensitive Coil: Option for Sensitive Coil: 7. High Capacity Contact Rating forContact Sensitive Coil: Option for Sensitive Coil: 7. HighOption Capacity Rating 7.F0277-C HighOption Capacity Rating F0277-C with Coilapplications Input/Contact Rating code withContacts Coil Input/Contact Rating code H = 8A Contacts (Only available with Coil"L"). Input/Contact Rating code "L"). H = 8A Contacts (Only available H = 8A (Only available with Coil"L"). Input/Contact Rating code "L Typical aly available applications 8. Insulation System: Appliances, HVAC, industrial control. 8. Insulation System: 8. Insulation System: rol ances, HVAC, industrial control A (105°C) ClassAF(105°C) (155°C) Leave Blank = Class A (105°C) ClassAF(105°C) (155°C) Leave BlankF==Class F = Class F (155°C) Leave BlankF==Class F = Class F (155°C) 9. Suffix: 9. Suffix: 9. Suffix: elOther for enclosure "SS" ,095 = Standard model code "SH" ,000 Other = Standard Suffix =model Custom for model enclosure code "SS" ,095 = Standard model code "SH" odel ,000 = Standard model for enclosure code "SS"for enclosure ,095 = Standard model for enclosure code "SH" ,000 Other = Standard Suffix =model Custom for model enclosure code "SS"for enclosure ,095 = Standard mo Suffix = code Custom model 2. Enclosure: ht)*, plastic cover. (Flux-tight)*, plastic cover. SS = n Vented 1 pole, 1 Form A (NO) contact to 10A SH rating case. = Sealed, plastic case. VZt VZt VZt cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. * Not suitable for immersion cleaning processes. ith sensitve coil, add suffix rating "H" to with the end of thecoil, partadd number as in of step of Ordering ** For higher contact withInformation. sensitve coil, add suffix rating "H" to with the end of thecoil, partadd number in of step of Ordering contact sensitve suffixCoil "H"indicated to Data the end the7part number Information. as indicated in step 7Coil of rating Ordering ** For higher contact sensitve suffixas "H"indicated to the end the7part number Approvals Data on. ** For higher rovals Coil Data VDE 50139166, UL range 6, UL E82292, CQC03001007764 CoilE82292, voltage CQC03001007764 range to 48VDC 40007630, TUV R40007630, 50139166,TUV UL R E82292, CQC03001007764 Coil voltage rangeCoil3voltage 3 to 48VDC 3 to 48VDC Technical data approved types request. quest IEC 2 likelyitems butors are moretypes likely to stock theon following items for the immediate Our delivery. authorized distributors are61810 more likely themore following for the immediat Operative range, IEC 61810 2 range, calOur data of approved onofrequest authorized distributors are more likely to stock following items for Operative immediate Our delivery. authorized distributors to stock follow Operative range, IEC 61810 2to stockare very. Coil Class insulation according Class UL Class E, F OJE-SH-124LMH,095 system according UL E, OJ-SH-105HM,095 Fsystem OJE-SH-124LMH,095 Coil insulation system according UL E, F OJE-SH-105DM,095 OJE-SH-112HM,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095Coil insulation OJE-SH-112HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJE-SH-112DM,095 tact DataContact Data OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-112LMH,095 OJ-SH-112LMH,095 OJE-SH-105LMH,095 Contact 1 form 1 NO Coil versions, DC sensitive coil, OJ/OJE-L sensitive type DCA,coil, OJ/OJE-L sensitive type 1 form arrangement A, 1 NO OJE-SH-124DM,095 OJE-SH-112LMH,095 OJE-SH-124DM,095 OJ-SH-124LMH,095 Coil versions, DC coil, OJ/OJE-L type OJE-SH-112LMH,095 act arrangement 1 formCoil A, 1versions, NO OJE-SH-124DM,095 OJE-SH-112LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 OJ-SH-124LMH,095 voltage Coil Operate Operate Release Rated coil Coil Rated coil Rated250VAC Operate Release CoilRated Rated coil 30VDC, 250VAC Coil Rated Release Coil d voltage Rated 30VDC,Coil 250VAC 30VDC, Max. switching voltage 30VDC, 277VACvoltage code voltage voltage voltage resistance power Diagram code voltage voltage resistance power 30VDC, 277VAC code voltage voltage voltage resistance power switching voltage 30VDC, 277VAC Wiring Diagram (Bottom View) Wiring som Outline Dimensions Wiring Diagram (Bottom View) Outline Dimensions Outline Dimensions View) 3 to 10A Ω±10% mW VDC VDC VDC Ω±10% mW to 10A VDC VDCVDC VDC VDC VDC Ω±10% mW d current Rated3 current 3 to 10A Contact material AgNi, AgSnO, AgCdO 003 200 003AgCdO 3 2.25 0.15 45 200 AgSnO, AgCdO 003 3 2.253 0.152.25 0.15 45 45 200 act material Ag, Ag, AgSnO, Min. recommended contact load 200 005 5 5VDC 3.75 0.25 125 200 100mA, 5VDC 005 5 005 3.755 0.253.75 125 0.25 200125 recommended contact load 100mA, 5VDC 100mA, Initial360 contact 006 4.5 006 100mohms 6 at 1A, 5VDC 4.5 0.3 180 200 ops./h 006 6 4.5 6 0.3.58 200 .58 ± .02 uency of operation 360 .58 ± .02 resistance ± .02 180 0.3 180 200 .58 ops./h ± .02 (14.7 ± of .5)15ms (14.7 ± .5) 405 0.45 Frequency operation 360 6.75 200 9 ops./h 6.75 0.45 405 200 OJ/OJE-L: (14.7009 ± .5)15ms (14.7 ± .5) 009 9 009 6.759 0.45 200405 ate time max. OJ/OJE-L: Operate time max. OJ/OJE-L: 15ms 9012 012 12 012 10ms 12 0.6 720 200 OJ/OJE-D/H: 10ms 12 9 0.6 9 720 0.6 720 200 200 OJ/OJE-D/H: OJ/OJE-D/H: 10ms 024 024 24 18024 1.2 2880 200 4ms 24 18 24 1.218 28801.2 2880 200 200 ase time max. 4ms Release time max. 048 048 484ms 36048 2.4 11520 200 48 36 48 2.436 115202.4 11520 200 200 rical endurance 3 All figures are given for coil without pre-energization, at ambient temperature +23°C. 3 ops. All figures are given for coil withoutAllpre-energization, temperature +23°C at Electrical 100x10 ops. figures are givenatforambient coil without pre-energization, ambient M°C to +95°C 3A, 250VAC, -30°C to +95°C 100x10 .157res., ±endurance .012 .157 ± .012temperature +23°C .157 ± .012 .157 ± .012 3 3 (4.00 ± .3) (4.00 ± .3) LM 3A, 250VAC, res., 100x10 ops. °C to +85°C 60x10 ops.-30°C (4.00to± +95°C .3) (4.00 ± .3) M 5A, 250VAC, res, -30°C to +85°C 60x103 ops. .012 .018 x .018 .012 .018 3 ops. .018 x .018-H type 3res, .012 .012 .018-H 3 ops. DM res.,5A, 250VAC, -30°C to +85°C 60x10 Coil versions, DC xand coil, OJ/OJE-D and -H type °C +70°C 100x10 ops. Coil versions, DC coil, OJ/OJE-D and MH(2) 8A, 250VAC, -30°C to.039 +70°C 100x10 Coil versions, DC coil, OJ/OJE-D type (.3)to (.45 (.3) .039 (.45 x .45) .039 .039 .012 .012 (.3) (.3) .039 .039 x .45) (.45 x .45) View) .0393 .039 .012 .012Coil 3 ops. 3 ops. PC30x10 Layout (Bottom View) PC Board Layout PCRelease Board Layout (Bottom (.3) LMH(2) 8A, 250VAC, -30°C to +70°C Board 50x10 Coil Release Rated coil °C to +85°C 30x10 Rated Operate CoilRated Rated coil tom View) (1.0)res., (1.0) Rated (.3)Operate MH2 8A, 250VAC,res., -30°C to +85°C Coil Rated Operate Release Coil coil (1.0) (1.0) ops. (1.0) (1.0) (.3)(1.0) Coil (.3)(1.0) 3 ops.voltage 3 ops. 3 ops. LMH2 res., 8A,-30°C 250VAC,res., -30°C tocode +85°C100x10 voltage 30x10 code voltage voltage voltage resistance power voltage resistance power +70°C 100x10 code voltage voltage voltage resistance power M0°C to10A, 250VAC, to +70°C 4 – .05 DIA 4 – .05 DIA 3 4 – .05 DIA 3 3 ops. HM res., 10A, 250VAC, res., VDC 10x10 ops. VDC VDC VDC VDC Ω±10% mW (1.3) .067 Ω±10% mW 0°C to10A, +85°C 10x10 ops. -30°C to +70°C10x10 VDC VDC Ω±10% mW M2 250VAC, -30°C to +85°C (1.3) .067 VDC (1.3) .067 VDC .401 ± .02 .401 ± .02 3 .401 ± .02 .401 ± .02 (1.71) 10x10 (1.71) res., -30°C003 to +85°C 3 003 3 2.1 450 (1.71) 20 003 ops. 0.15 3 2.1 0.152.1 0.15 450 20 450 act ratings HM2 10A, (10.2250VAC, ± .5) (10.220 ± .5) (10.2 ± .5) (10.2 ± .5) 3 ops. 0.25 .008 10A, 250VAC, res.,.300 .300 ± .008 .300 HM6 -30°C to +85°C 5 50x10 005 5 3.5 0.25 55.6 450 005 3.5 55.6 450 3A,± 250VAC ± 250VAC .008 .300 ± .008 005 5 3.5 0.25 55.6 450 M 3A, (7.62 ± .2) (7.62 ± .2) (7.62 ± .2) (7.62 ± .2) Contact ratings 006 6 006 6 4.2 0.3 80 450 5A 250VAC 006 6 4.2 0.3 4.2 0.3 80 450 80 450 M 5A 250VAC .300 ± .004 .300 ± .004 450 6.3 .004 LM 3A,9250VAC 009 9 0.45 180 450 009 6.3 0.45 180 8A 250VAC 009 9 6.3 0.45 180 450 MH(2) 8A 250VAC (7.6 ± .1) (7.6 ± .1) ± .1) DM 5A12250VAC 012 12 8.4 012 8.4 0.6 320 450 10A .067250VAC .067 012 12 8.4 0.6 320 0.6 320 450 450.067 M(2) 10A .067250VAC 6 operations (1.71) (1.71) 6 operations (1.71) 10x10 LMH(2) 8A24250VAC 16.8 024 16.8 1.2 1280 450 1.2 450 024 24 16.8 24 1.2 450(1.71) 024 hanical endurance, DC.500 coil± .008 10x10 008 .500 ±1280 .008 .500 ±1280 .008 ± .2) (12.705120 ± .2).100 HM(2), HM6 10A 250VAC 048 48 33.6 2.4 5120 450 048 48 33.6 2.4 450 .100 ± .004 (12.70 ± .2) (12.70 ± .2) 048 48 33.6 2.4 5120 450.1 ± .008 ± .004 .500 ± .004 .500 ± .004 .004 .1 ± .008 .1 ± .008 .500 ± .004 .1 ± .008 (2.54 ± .1) 6for (2.54 .1) without All figures are±given for±+23°C coil pre-energization, at ambient +23°C. All.2) figures are given(12.7 coil atfor ambient temperature ± .1)withoutAllpre-energization, (12.7 ± .1) Mechanical endurance, DC coil 10x10 operations ±± .1) (2.54 ± .2) .716 (2.54 ± .2) .716 figures are given(12.7 coil pre-energization, at ambient temperature +23°C temperature ± .1)without .02 .716 .02 (2.54 ± (2.54 ± .2) ± .02 ± .02 Reference Data 20 12 100 60 10 50 8 6 6 Operate Time 4 4 40 10 30 Operate Time 20 Operate Time 12 HM type, 120VAC Res. 10 50 LMH type, 250VAC Res. LMH type, 250VAC Res. 8 40 100 60 HM type, 120VAC Res. 10 30 20 Time (msec) 30 LMH type, 250VAC Res. 8 Reference Data Coil temperature rise Coil Coil Lifetemperature Temperature Expectancyrise Rise Coil Operate Time Coil Lifetemperature Temperature Expectancyrise Rise Temp. Rise (°C) 4 Operation (x 10 ) 40 HM type, 120VAC Res. 10 Time (msec) Temp. Rise (°C) 50 MH type, 250VAC Res. 12 Time (msec) 00 60 20VAC Res. Operate time Operate Time (18.2 ± .5) Time (msec) Reference Data Operate time etrical Operate Time endurance Coil Temperature Rise Expectancy 10 (18.2 ± .5) (18.2 ± .5) Temp. Rise (°C) 4 Operation (x 10 ) ± .5) 12 10 8 6 6 Operate Time 4 4 O LM type, 250VAC Res. LM type, 250VAC Res. LM type, 250VAC Res. 2 2 10 2 2 10 10 DM type, 250VAC Res. Res. DM type, 250VAC Res. Release Time Release Time DM type, 250VAC Res. Release Time 1 1 1 0.2 0.3 0.1 0.4 0.5 0.6 0.4 0.5 0.6 0.5 0.6 0.7 1 0.62 0.20.7 00.5 0.1 3 0.3 4 50.4 6 0.5 7 0 80.6 10 0.2 0.3 0.2 0. 0.23 0.3 0.1 0.7 0.4 0.1 0.7 0.3 0.1 1 9 20.7 7 0.4 4 50.4 6 0.5 70.1 80.60.2 9 0.7 100.3 0 8 1 9 210 30.1 4 0.2 5 6 7 0.48 90.5 10 0.6 0.7 Contact Current (A) ower Coil Power (W) Coil Power (W) Coil Power (W) (A) (W) Contact Current (A) Coil Power (W) Coil Power (W) Coil Power (W) Coi Contact Current (A) Test relay: OJE-SH-112LMH Test relay: OJE-SH-112LMH Test relay: OJE-SH-112LMH Test relay: OJE-SH-1 Specifications andDimensions availabilityare shown www.tycoelectronics.com Specifications an Dimensions are inwww.tycoelectronics.com inches over for Dimensions are in inches over www.tycoelectronics.com Specifications andDimensions availability www.tycoelectronics.com Dimensions are shown for Dimensions are in inches over are shown for Dimensions are in inches over ility subject to change.reference purposessubject support: unless423 subject to change otherwise only. to change.reference Technical otherwise Technical Technical(millimeters) support: unless423 referencesupport: purposes(millimeters) only. 423unless unless otherwise purposes(millimeters) only. otherwise Technical support: (millimeters) 423 Refer to inside back cover. specified. Refer to inside backspecified. cover. Refer to inside back cover. specified. Refer to inside backspecified. cover. 1 1 1 3-2018, 0318specification Catalog product specification Catalog and product data is subject Catalog product data, andand product data is subject toaccording the andDatasheets, Datasheets andRev. product data,to‘Definitions’ sec-to theproduct data, 11, Rev. 0611 Datasheets product dataproduct is subject the Datasheets andDatasheets product specification Datasheets, ‘Definitions’ sec- ‘Definitions’ section, www.te.com to 61810-1 and used only terms disclaimer and all chapters of notesapplication notes and all specifications are of IEC theand disclaimer andtoallbechapters ofoftogether to IEC 61810-1 and to beaccording used to IECterms tion, application notes andofall specifications e.com according terms the disclaimer and of all the chapters 61810-1 to be used tion, application and all specifications © 2018 TE Connectivity Ltd.section. family with the ‘Definitions’ section.atthe ‘Definitions’are theavailable ‘Definitions’ at thethe ‘Definitions’ section, available only together with the ‘Definitions’ subject to change. 1 Tyco Electronics Corporation, section, at section, available only together with ‘Definitions’ section. are subject to change.subject to change. http://relays.te.com/definitions companies. All rights reserved. http://relays.te.com/definitions onnectivity Ltd.ofcompany http://relays.te.com/definitions Leave Blank = Class A (105°C) F = Class F (155°C) SS2.= Enclosure: Vented OJE-SH-112LMH,095 (Flux-tight)*, plastic cover. OJE-SH-124DM,095 OJ-SH-124LMH,095 SH = Sealed, plastic case. eave = Class A (105°C) F Outline = Class F (155°C) Wiring Diagram (Bottom 8. Blank Insulation System: Dimensions SH =SS Sealed, plastic case. Outline Dimensions = Vented (Flux-tight)*, plastic cover.Wiring Diagram (Bottom View) .uffix: Suffix: Leave Blank = Class A (105°C) F = Class F (155°C) 3. Termination: 3. Termination: SH = Sealed, plastic case. Wiring Diagram (Bottom Outline Dimensions ,000 = Standard model for enclosure = Standard enclosure code "SH" Other Suffix Other Suffix =model Custom modelView) 1 =code 1 pole"SH" 000 Standard model for enclosure code code "SS" "SS" ,095 =,095 Standard model model for enclosure = Custom 1 =3.1for pole 9.= Suffix: Termination: General Purpose Relays General ,000 = Standard model for enclosure code "SS" ,095Purpose = StandardRelays model for Voltage: enclosure code "SH" Other Suffix = Custom model 14. = Coil 1 poleVoltage: 4. Coil Not suitable for immersion cleaning processes. General Purpose Purpose Relays PCB Relays PCBGeneral Relays Power PCB PCB Relays Relays t suitable for immersion cleaning processes. 05±=.02 5VDC 09 = 9VDC 24 = 24VDC 24 = 24VDC 05± 5VDC 09 = 9VDC .58Voltage: 4.=.02 Coil .58 * For higher contact rating with sensitve coil, add "H" suffix "H" end to the endpart of the part number as in step of Ordering Information. 06 12 = 12VDC 48 = 48VDC or higher contact rating with sensitve coil,processes. add suffix to the of the number as indicated in05 step 7= Ordering Information. * Not suitable for immersion cleaning 06 indicated = 6VDC 12 7=09 12VDC 48 =2448VDC ±of6VDC .5) = 5VDC = 9VDC = 24VDC (14.7 ±.58 .5)(14.7 ± .02step 7 of Ordering Information. ** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as 06 6VDC 12 = 12VDC 48 = 48VDC 5. =in Rating: 5. indicated Coil(14.7 Input/Contact Rating: ±Coil .5) Input/Contact OEG OEG OEG OEG = Sensitive Coil, 3A Contacts** D= Standard (450mW) Coil, 5 L =5.Sensitive (200mW) (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts Coil Input/Contact Rating: ur authorized distributors are more to stock theRelay following items for(200mW) immediate delivery. authorized distributors are more likelylikely to stock thePCB following items forLH immediate delivery. = Standard (450mW) Coil, 10A Contacts H = Standard (450mW) Coil,Coil, 10A3A Contacts Miniature PCB Relay (Continued) Miniature OJ/OJE (Continued) L =OJ/OJE Sensitive Contacts** D = Standard (450mW) Coil, 5A Contacts Miniature PCB Relay OJ/OJE Our authorized distributors are more likely to stock thePCB following items for (Continued) immediate delivery. OJE-SH-124LMH,095 OJE-SH-124LMH,095 H6.= Contact Standard (450mW) Coil, 10A Contacts H-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 J-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 Miniature Relay OJ/OJE (Continued) 6. Contact Arrangement: Arrangement: OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 .157 ± .012 OJE-SH-112DM,095 .157 .012 H-112LMH,095 Form OJE-SH-112DM,095 OJE-SH-105LMH,095 OJE-SH-105LMH,095 M 6.= 1Contact Arrangement: J-SH-112LMH,095 M ±=A, 1 SPST-NO Form A, SPST-NO ±M .3)(4.00 ± .3) A, SPST-NO .157 ±=.012 OJE-SH-112DM,095 OJE-SH-112LMH,095 OJE-SH-105LMH,095 7.(4.00 OJ-SH-112LMH,095 1 Form OJE-SH-124DM,095 H-124LMH,095 OJE-SH-124DM,095 J-SH-124LMH,095 High Capacity Contact Rating Option forOption Sensitive .012 7. ±High Contact Rating for Coil: Sensitive Coil: .018 x .018 .018 x .018OJE-SH-112LMH,095 (4.00 .3) Capacity .012 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 (.3) .012 7. High Contact Rating Option for Sensitive Coil: H .012 = 8A Contacts (Only available with Coil Input/Contact Rating codeRating "L"). code "L"). PCB layout assignment Insulation Data (.45 x .45) .039 .018 (.3) .012Terminal Insulation Terminal PCB layout HCapacity =assignment 8A .039 Contacts (Only available with Coil Input/Contact PCB layout Insulation DataData Terminal assignment (.45 xx .018 .45) .039 .039 PC Board Layout (Bottom View) PC Board Layout (Bottom (.3) (1.0).039with = 8A Contacts (Only available Coil Input/Contact Rating code "L"). (1.0) (.3) 8. PCBBoard layout Terminal assignment Insulation Data (.45 x .45) .039 .012 (1.0) Bottom view on solder pins Bottom view on solder pins Initial dielectric (1.0) (.3)H8. Initialstrength dielectric strength Bottom view on solder pins Bottom view on solder pins Insulation System: PC Layout (Bottom View Wiring Diagram (Bottom View) line Dimensions Bottom view on solder pins Bottom view on solder pins Initial dielectric strength Insulation System: (1.0) Wiring Diagram (Bottom View) (1.0) (.3) utline Dimensions Bottom view on solder pins Bottom view on solder pins 8. Insulation System: Wiring Diagram Leave Blank = Class F =View) Class 4F–F(155°C) .05 DIA 4F– (155°C) Leave BlankA=(105°C) Class(Bottom A (105°C) =F Class .05 DIA Leave Blank = Class A (105°C) F = Class(1.3) (155°C) 4 – .05 DIA .067 9. Suffix:.401 ± .02 (1.3) .067 9. Suffix:.401 ± .02 (1.3) .067 (1.71) 9. Suffix: .401 .02 for enclosure code "SS" ± .5)±model ,000 = (10.2 Standard ,095 = Standard model for enclosure cod ± .5) model = (10.2 Standard for enclosure code ,095 "SS" = (1.71) ,095 = (1.71) Standard for ce .300 ± .008,000,000 ± .5) model = (10.2 Standard for enclosure code "SS" Standard model for model enclosure .300 ±for .008 .300 ± .008 (7.62 ± .2) * Not suitable immersion cleaning processes. (7.62 ± .2) (7.62 ± .2) Not suitable for immersion processes. Not* suitable immersion cleaningcleaning processes. ** For*higher contactforrating with sensitve coil, add suffix "H" to the end of the part number as indicated .300 ± .004 in step 7 of O **higher For higher contact rating with sensitve of the part as step indicat ** For contact rating with sensitve coil, add coil, suffixadd "H" suffix to the "H" endto of the the end part number as in 7o ± .00 .300 ±number .004.300 (7.6 ± indicated .1) (7.6 ± .1) (7.6 ± .1) .067 Our authorized distributors are more likely to stock the following items for imm .067.067 (1.71) Our authorized distributors are more to stock following items forite im .500 ± .008 Our authorized distributors are likely more likely tothe stock theOJE-SH-124LMH following (1.71) Tracking index of relay base PTI 250 (1.71) OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 (12.70.500 ±.500 .2)± .008 ± .008 .100 ± .004 OJE-SH-124LM OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 .500 ± .004 OJE OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 (12.70 ± .2) .1 ± .008 .100 ± .004 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-112LMH,095 (12.70 ± .2) .500 ± .004 (2.54 ± .1) .100 ± .004 ± .008 OJE-SH-112DM,095 OJE-SH-105LMH,095 (12.7 ± .1) .500 ± .004 OtherOther Data Data (2.54OJ-SH-112LMH,095 ±.1.2) (2.54 ± .1) .716 ± .02 .1± ±.2).008 .157 ± .012 OJE-SH-112DM,095 OJ-SH-112LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 (12.7 OJE-SH-105LMH,095 ± .1) (2.54 (2.54 ± .1) .716 ± .02 .157 ± .012 OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 (12.7 ± .1) Other Data (18.2 ± .5) (2.54 ± .2) (4.00 ± .3) .716 ± .02 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content .157 ± .012 Other Data Dimensions OJE-SH-124DM,095 OJE-SH-112LMH,095 OJ-SH-124LMH,095 (18.2 ± .5)content (4.00 ± .3) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen .012 (18.2 ± .5) 8 x .018 (4.00 ± .3) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Dimensions refer.012 to the Product Compliance Support Center at atOutline Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content .018 x .018 Wiring Dia Dimensions Dimensions refer to the Product Compliance Support Center (.3) .012 5.018 x .45) .039 Wiring D .012 Outline Dimensions x .018 (.3) Reference Data.039 (.45 x .45) .039 at atPC .039 Board Layout (Bottom View) .012 Dimensions referrefer to the Product Support Center ProductCompliance Compliance Support Center www.te.com/customersupport/rohssupportcenter W Reference Data Outline Dimensions PC Board Layout (Bottom View) (1.0) (1.0) (.3)to the (.3) www.te.com/customersupport/rohssupportcenter (.45 x .45) .039 .039 .012 (1.0) (1.0) (.3) Reference Data PC Board Layout (Bottom View) www.te.com/customersupport/rohssupportcenter Initial dielectric strength open between open contacts Outline Dimensions between contacts between open contacts 750Vrms 750Vrms 750V rms between open contacts 750V rms rms contact between contact and coil OJ: 4000V OJ: 4000V between and coil rms between contact and coil OJ: 4000V rms between contact and coil OJ: 4000V OJE: 3000V OJE: 3000Vrms rmsrms OJE:3000V 3000V rms OJE: Initial insulation resistance rms Clearance/creepage Clearance/creepage Clearance/creepage between insulated elements 1000Mohms min .58 ± .02 between contact and coil OJ:.58 > 7.7mm / 9.4mm .02 ± .02 (14.7 ±.58 .5) OJ: between contact and OJ: 7.7mm/ /9.4mm 9.4mm between andcoil coil >> 7.7mm Clearance/creepage between contactcontact and coil OJE: > 3.2mm (14.7 ±± .5) (14.7 .5) / 3.6mm between contact OJ:>>>3.2mm 7.7mm///3.6mm 9.4mm between contact andand coilcoil OJE: OJE: between contact and coil 3.2mm 3.6mm Tracking index of relay base PTI 250 index between and coil OJE: >PTI 3.2mm Tracking index of relay base 250 Tracking of contact relay base PTI 250/ 3.6mm Operation (x 104) Operation (x 104) Operation (x 104) Time (msec) Time (msec) Time (msec) Temp. RiseRise (°C) (°C) Temp. Temp. Rise (°C) AmbientAmbient temperature Coil(.3)Temperature Rise(1.0) Operate Time Life Expectancy temperature www.te.com/customersupport/rohssupportcenter (1.0) Temperature Rise Operate Time Life Expectancy Ambient temperature Coil 4 – .05 DM: -30°C to +85°C Ambient 4 –DIA .05 DIA DM:temperature -30°C to +85°CRise 100100 Coil Temperature Operate Time Life Ex 12 60 12 .067 (1.3) (1.3) .067 60 DM: -30°C -30°C to +85°C .58 ± .02 4 – .05 DIA .401-30°C ± .02 HM:DM:HM: to +70°C -30°C to +85°C .58 ± .02 .401 ±to .02 +70°C 100 (1.71) 12 .067 (14.7(14.7 ± .5)± .5) 60 (1.71) HM: -30°C to +70°C (10.2 ± .5) (1.3) ±±to.5) HM2: -30°C-30°C to(10.2 +85°C .58 ± .02 .401 .02 HM:HM2: -30°C +70°C to +85°C 10 10 .300 ±50 .008 ±50 (1.71) .300 .008 -30°C HM2, HM6: to +85°C (14.7 ± .5) ± .5) LM HM2: to(10.2 +90°C LM (7.62 ±(7.62 .2) -30°C -30°C +85°C ±.008 .2) -30°C LM -30°Ctoto to+90°C +90°C 10 .300 -30°C ±50 LMH: to +70°C -30°C to +70°C 8 .300 ± .004 LM LMH: -30°C to +90°C 40 8 .300 ± .004 LMH: (7.62 ±40.2) -30°C to +70°C LMH2: to +85°C (7.6 (7.6 ± .1)± .1) LMH2: -30°C toto LMH: -30°C +70°C LMH2: -30°C -30°C to+85°C +85°C 8 .157 .157 ±±.012 .300 .004 ± .012 40 .06730 .067 Category of environmental protection Category of environmental protection (4.00 ±±.3) 10 10 ± .3) 6 Category of environmental protection 30 -30°C to +85°C 6 LMH2: (7.6(4.00 .1) (1.71) RTII (1.71)- RTII .012 .012 .018 x.018 .018x .018 .157 ± .012 Operate Time Operate Time IEC 61810 dust protected IEC 61810 dust protected .500 ± .008 .500 ± .008 protection .067 IEC 61810 RTII - flux proof/dust protected (.3) (.3) Category of environmental (.45 x .45) .039 .039 (.45 x .45) .039 .039 .012 .012 (4.00 ± .3) 10 L 30 -RTIII 6 PCPC Board Board (12.70 ±(12.70 .2) ± .2) - -wash tight RTIII wash tight ± .004 ±.012 .004 (1.0)(1.0) (1.0)(1.0) wash tight (.3) (1.71) (.3) ± 4.004 .100.100 .500x.500 ±.018 .004 4 .018 Operate Time .1 ± 20 .008 .1 ± 20 .008 IEC 61810 .500 ± .008 RTIIRTIII - dust protected (2.54 ± .1) (2.54 ± .1) (.3) Shock resistance (functional) 10g Shock resistance (functional) 10g (.45 x .45) .039 (12.7 ± .1) .039 (12.7 ± .1) .012 Vibration resistance (functional) 10 to 55 hz., 1.5mm double amplitude (2.54 ±(2.54 .2) ± .2)RTIII - wash tight .716 ± .02 .716 ± .02 P type, 250VA LMLM type, – .05 4 250VAC –4.05 DIA (12.70 ± .2) .100 ± .004 (1.0) (1.0) (.3) .500 .004 Shock resistance (destructive) 100g double amplitude ±(ddestructive) .5) Vibration resistance 10 to20 55100g hz., 1.5mm Shock resistance (destructive) (1.3) (18.2 ± (18.2 .5) .008 (1.3) 2 ±4 2 10.1 ± 10 .401.401 ± .02± .02 (2.54 ± .1) Shock resistance (functional) 10g (12.7 ± .1) ( (2.54 ± .2)9g 9g .716 ±(functional) .02 Shock resistance 10g Weight Weight (10.2(10.2 ± .5)± .5) LM DM ± Release .008 Time Time .300 .300 ± Release .008 Shock resistance (destructive) 100g (18.2 ±(destructive) .5) Shock resistance 100g Resistance to soldering heat THT 2 1 Resistance to soldering heat THT Reference Data 10 .401 ± .02 1 erence Data (7.62(7.62 ± .2)± .2) Weight 9g ± .5) 0.2 0.3 Weight 9g 0.1270°C/10s IEC 60068-2-20 RTII: 0.2 0.1 0.10.2 0.20.3 0.30.4 0.40.5 0.50.6 0.6(10.2 0.7 0.7 0.1270°C/10s 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0 01 1 2 2 3 IEC 60068-2-20 RTII: .300 ± Release .008 Time Coil Temperature Rise Operate Time Life Expectancy Temperature Rise Operate Time Life Expectancy Resistance to soldering Resistance to soldering heatheat THTTHT RTIII: 260°C/5s 1C eference Data (7.62 ± .2) RTIII: 260°C/5s Coil Power (W) Power Coil Power (W) Coil Coil Power (W) (W) .067 .067 120.2box/1000 60068-2-20 IEC 60068-2-20 RTII: 270°C/10s 60 100 100 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 Packaging unit tray/100, carton 0 Test relay: OJE-SH-112LMH 12 IEC RTII: 270°C/10s (1.71) 0Packaging unit tray/100, carton box/1000 Test.500 relay: OJE-SH-112LMH (1.71) ± .008 Operation (x 104) 2 Data Operation (x 104) Type 6 60 Operate Time 60 Reference Operation (x 104) 10 4 4 12 Typical product code Coil OJ -SH Rise -1 12 10LMH 10 F -WG ,000 Temperature Operate Time 50 10 Res. 50 LM type, 250VAC Operate Time 12 60 LM type, 250VAC Res. Temp. Rise (°C) Product code structure Time (msec) Time (msec) 0 30 20 Time (msec) type, 120VAC Res. Operate Life Expectancy RTIII: 260°C/5s Time .500 ± .008 HMHM type, 120VAC Res. RTIII: 260°C/5s (12.70 ± .2) Coil Power (W) Power (12.70 ± .2)over .500 ± .1Coil ± .008 .067 (W) Specifications and availability Dimensions are shown for Dimensions are in inches Packaging unit tray/100, carton box/1000 .500 ± .0 .1 ± .008 100 10 50 12 Specifications and availability Dimensions are shown for Dimensions are in inches over (12.7 60 10 (2.54 ± .2) Packaging unit tray/100, carton box/1000 Test ± .02 relay: OJE-SH-112LMH 0 (1.71) subject to change. (12.7 ±. reference purposes (millimeters) otherwise (2.54 ± .2) .716 ±.716 .02 LMH type, 250VAC Res. .500 subject to change. reference purposes only. only. (millimeters) unlessunless otherwise (18.2 ± .5)± .008 HM type, 120VAC Res. LMH type, 250VAC Res. (18.2 ± .5) specified. (12.70 ± .2) specified. .1 ± .008 Specifications and availability Dimensions are 8shown810 for Dimensions are in inches over 0 50 40 Reference Data (2.54 ± .2) .716 ± .02 subject to change. reference purposes only. (millimeters) Reference Data unless otherwise LMH type, 250 (18.2 ± .5) Coilspecified. Temperature Rise Operate Time 10 30 68 Coil Temperature Rise Operate Time 10 0 40 6 Operate Time 12 Temp. Rise (°C) oil Temperature Rise 40 8 Time (msec) Time (msec) Temp. Rise (°C) 2 8 40 Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000 4 Miniature PCB Relay OJ, 4kV dielectric between coil and contacts DM type, Product code OJ structure Typical product code Release OJ50Time -SH -1 12 LMH F 250VAC -WG Res.,000 10 DM type, 30 6 250VAC Res. 0 20 Special type 2 Blank 3-2018, Rev.Standard 0318 Suffixwww.te.com ©,000 2018 TE Connectivity StandardLtd. family 2 of companies. All rights reserved. 06-2011, Rev. 0611 www.te.com 06-2011,©Rev. 0611 2011 Tyco Electronics Corporation, Time (msec) Temp. Rise (°C) 1 Release Time OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts LM type, 250VAC Res. Operate Time 1 0.2 0.3 30 0.2of protection 0.1 0.4 0.5 0.6 0.7 Type 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 63 8 Time 4 5 8 6 7Operate 9 10 Category 2 40 0.2 0.2 OJ0.3 Miniature 0.1 0.3 0.4 0.5 0.6 0.7 0.4 0.5PCB0.6 0.7 1 0 2 8 3 4 5 6 7 9 10 20 4 Relay OJ, 4kV dielectric between Typical coil andCoil contacts Product code structure product code OJ -SH -1 12 LMH F -WG ,000 SS Coil Flux proof Contact Current (A) Power (W) Power 20 (W) 4 DM type, 250VAC Res. OJ Miniature PCB Relay 4kV dielectric between coil andCoil contacts Release Time OJE Miniature PCB OJ, Relay OJE, 3kV dielectric between and contacts Contact Current Coil Power (W) tight Power (W) SH Wash Test relay:coil OJE-SH-112LMH 30 6 (A) 1 2 10 OJE Miniature PCB Relay OJE, 3kV dielectric between and contacts Test relay:coil OJE-SH-112LMH Operate T Category Number poles 0.4 0.2 0.310 0.4 0.2ofofprotection 0.1 0.5 0.6 0.7 Type 0.1 0.3 0.5 0.6 0.7 0 12 2 3 8Time9 4 5 6 Release 7 Category protection Specifications and availability www.tycoelectronics.c Dimensions are shown Dimensions are in inches over SS 1 for Fux1 proof of pole 20 4 Release Time OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts Specifications and availability www.tycoelectronics.com ons are shown for SH Dimensions are in inches 0.2 change. Technical support: 0.2 to0.3 reference purposes only. proof (millimeters) unlessover otherwise 0.1 0.3 0.4(A) 0.5 0.6 SS Fux 0.1subject 0.4 0.5 0.6 0.7 Contact Current Coil Power (W) Coil Power (W) Wash tight Coil OJEvoltage Miniature PCB Relay OJE, 3kV dielectric between coil and contacts0.1subject 0.2 Technical Refer0.4tosupport: inside change. 0.2 to0.3 e purposesNumber only. unless otherwise 0.1 0.3 0.5 back 0.6 cov 0 0.7 OJE-SH-112LMH SH Wash tight Coil0.4 Power0.5 (W) 0.6 Coil Power (W) Coil code: please refer (millimeters) to coil specified. versions table (e.g. Test 12 = relay: 12VDC) of poles 2 10 Refer to inside back cover specified. Test relay: OJE-SH-112LMH Category Coil Power (W) Coil Power (W) Number ofContact poles rating and coil power 1of protection 1 pole Re Test relay: OJE-SH-112LMH Specifications and availability www.tycoe ensions are 1 shown 1forpole SS Fux proof 450 mW coil power Dimensions are in inches over 200mW coilDimensions power are shown for Coil voltage Spec Dimensions are in inches over 0.2 subject to change. Technical s 0.2 ence purposes only. (millimeters) unless otherwise 0.1 0.3 0.4 0.1 0.3 0.4 0.5 0.6 0.7 subje reference purposes only. (millimeters) unless otherwise SH Wash tight type,refer coil power 3A type, coil power 200mW Coil voltage CoilDM code: 5A please to coil 450mW versions table (e.g. 12 LM = 12VDC) Dimensions are shown for Dimensions are in inches over specified.unless otherwise ReferSpecific to ins( subject reference purposes200mW only. (millimeters) HM 10A type, coilversions power specified. 450mW LMH 8A type, coil power Coil Power (W) Coil Power Number of rating poles Coil code: please refer topower coil table (e.g. 12 = 12VDC) Contact and coil specified. Test relay: OJE-SH-112LMH 1 HM2 type, power coil power 450mW LMH2 200mW 8A type,coil coil power power 200mW 1 coil pole 45010A mWcoil Contact rating and power HM6 10A type, coil power 450mW DM 5A type, coil power 450mW LM200mW 3A type, coil power 200mW 450 mWcoil power coil power Coil voltage Dimensions are shown for Dimensions are in inches over system designation reference purposes only. (millimeters) unless otherwise TV-5 coil450mW power 450mW table (e.g. LMH 8A type, coil power 200mW DMInsulation 5A type, coiltype, power LM 12 3A12VDC) type, coil power 200mW CoilTM code: please refer to coil versions = Blank Insulation Class E (standard) F Insulation Class F 200mW specified. HM 10A type, coil power 450mW LMH2 8A type, coil power TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW Contact rating and coil power Special type HM2 10A type, coil power 450mW HM 10A type,mWcoil coil power 450mW LMH2WG 8A type, coil power 200mW 450 200mW coil power (IEC 60335-1) Blank Standard power For domestic appliances Insulation system designation HM2 type, coil power 450mW DM10A 5A type, coil power 450mW LM 3A type, coil power 200mW Suffix Blankdesignation Insulation Class E (standard) F Insulation Class F Insulation system TM ,000 TV-5 Standard type, coil power 450mW LMH 8A type, coil power 200mW Special type Blank Insulation Class E (standard) F Insulation Class HMBlank10A type, coil power 450mW LMH2For8Adomestic type, Fcoil power 200mW Standard WG appliances (IEC 60335-1, 4 Edition) Special type HM2 10A type, coil power 450mW Suffix Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition) Insulation,000 system designation Standard Suffix Blank Insulation Class E (standard) F Insulation Class F ,000 Standard 10 0.1 Type WG according For domestic appliances (IEC 60335-1, Catalog and product specification Catalog and product data is subject to the 4 Edition) Catalog product data, ‘Definitions’ section, to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. http://relays.te.com/definitions Datasheets and product data is subject to the Datasheets and product specification Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of according to IEC 61810-1 and to be used tion, application notes and all specifications and product data is subjectatto the Datasheets product Datasheets, product data, ‘Definitions’ secthe ‘Definitions’ section, available only and together withspecification the ‘Definitions’ section. Datasheets are subject to change. General Purpose Power PCB Relays OEG Miniature PCB Relay OJ/OJE (Continued) Product code Rating Cont. mat. Coil Coil power Type Insulation Enclosure Part Number OJ-SH-105LM,000 3A AgNi 5VDC 200mW Standard Class E Wash tight 1461404-1 OJE-SH-112LM,000 12VDC 1461401-5 OJE-SS-112LM,000 Flux proof 4-1419128-6 OJ-SH-112LM,000 Wash tight 1461404-6 OJ-SS-112LM,000 Flux proof 2-1419129-1 OJ-SS-124LM,000 3-1419129-1 OJ-SH-124LM,000 24VDC Wash tight 1461404-4 OJE-SH-105DM,000 5A 5VDC 450mW 1461400-1 OJE-SS-105DM,000 Flux proof 2-1419128-8 OJE-SH-112DM,000 12VDC Wash tight 1461400-4 OJE-SS-112DM,000 Flux proof 4-1419128-2 OJ-SH-112DM,000 Wash tight 1461406-4 OJ-SS-112DM,000 Flux proof 1-1419129-8 OJE-SH-124DM,000 24VDC Wash tight 1461400-5 OJE-SS-124DM,000 Flux proof 6-1419128-2 OJ-SS-124DM,000 2-1419129-9 OJE-SH-105LMH,000 8A AgCdO 5VDC 200mW Wash tight 1461403-3 OJE-SH-105LMH-WG WG type 1721875-2 OJE-SS-105LMH,000 Standard Flux proof 1461034-2 OJ-SH-105LMH,000 Wash tight 8-1419128-1 OJ-SH-106LMH,000 6VDC 1461247-1 OJE-SH-109LMH,000 9VDC 1461403-2 OJE-SS-109LMH,000 Flux proof 5-1419144-3 OJ-SH-109LMH,000 Wash tight 1461247-2 OJ-SS-109LMH2-WG AgSnO WG type Flux proof 1721874-4 OJ-SS-109LMHF,000 AgCdO Standard Class F 1721083-5 OJE-SH-112LMH,000 12VDC Class E Wash tight 1461403-4 OJE-SH-112LMH-WG WG type 1721875-5 OJE-SS-112LMH,000 Standard Flux proof 5-1419128-0 OJE-SS-112LMH2 AgSnO 1721261-5 OJ-SH-112LMH,000 AgCdO Wash tight 9-1419128-8 OJ-SH-112LMH2 AgSnO 1-1721260-1 OJ-SS-112LMH,000 AgCdO Flux proof 2-1419129-5 OJ-SS-112LMH2 AgSnO 1721260-5 OJ-SS-112LMHF,000 AgCdO Class F 1721083-1 OJE-SH-124LMH,000 24VDC Class E Wash tight 1461403-5 OJE-SH-124LMH-WG WG type 1721875-6 OJE-SS-124LMH,000 Standard Flux proof 7-1419128-1 OJ-SH-124LMH,000 Wash tight 1461247-3 OJ-SS-124LMH,000 Flux proof 4-1419144-4 OJ-SS-124LMH2 AgSnO 1721260-6 OJ-SS-124LMH2-WG WG type 1721874-6 OJ-SS-124LMHF,000 AgCdO Standard Class F 1461014-2 OJ-SH-105HM,000 10A AgCdO 5VDC 450mW Class E Wash tight 1461405-3 OJE-SH-112HM,000 12VDC 1461402-6 OJE-SS-112HM,000 Flux proof 4-1419128-3 OJE-SS-112HM2,000 AgSnO 1721539-5 OJ-SH-112HM,000 AgCdO Wash tight 1461405-5 OJ-SS-112HM,000 Flux proof 1419135-3 OJ-SS-112HMF,000 Class F 1461078-5 OJ-SS-112HM6-WG AgSnO WG type 2071398-1 OJE-SS-124HM,000 AgCdO 24VDC Standard Class E 6-1419128-4 OJ-SS-124HM,000 1440007-2 OJ-SS-124HM2,000 AgSnO 1721538-7 3-2018, Rev. 0318 www.te.com © 2018 TE Connectivity Ltd. family of companies. All rights reserved. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 General Purpose Power PCB Relays OEG Miniature PCB Relay OJ/OJE (Continued) te.com TE Connectivity and TE connectivity (logo) are trademarks. Other products, logos and company namesmentioned herein may be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity’s obligations shall only be as set forth in TE Connectivity’s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 4 3-2018, Rev. 0318 www.te.com © 2018 TE Connectivity Ltd. family of companies. All rights reserved. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change.