1462000-1

Signal Relays AXICOM MT2 Relay n Telecom/signal relay (dry circuit, test access, ringing) line 20x10mm (.795x.393”) n Switching current 2A n 2 form C contacts (2 CO, 2 changeover contacts) n Bifurcated contacts n Meets FCC Part 68 and ITU-T K20 n Slim Typical applications Communications equipment, linecard application – analog, ISDN, xDSL, PABX, voice over IP, office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment, automotive Equipment Approvals Coil Data UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement 2 form C (2 CO) Max. switching voltage 220VDC, 250VAC Rated current 2A Limiting continuous current, 85°C 2A Contact material AgNi, gold-covered Contact style bifurcated contacts Min. recommended contact load 10mA at 20mV Minimum switching voltage 100μV Initial contact resistance < 70mΩ at 10mA, 20mV Frequency of operation, without load max. 50 operations/s Operate / release time max. 5ms/3ms Bounce time max. 5ms Electrical endurance contact application 0 (≤30mV/≤10mA) min. 5x106 operations cable load open end min. 2.5x106 operations resistive load 150V/0.2A - 30W min. 2x105 operations 24V/1.25A - 30W min. 2x105 operations Contact ratings, UL N.O./N.C. Contacts 0.4 A at 125 V ac, resistive 1.25 A at 24 V dc 2 A at 30 V dc These ratings are for same polarity between poles. Mechanical endurance typ. 100x106 operations DC voltage [VDC] Max. DC oad l br eaking capac ity DC current [A] 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Z Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Magnetic system neutral Coil voltage range 3 to 48VDC Max. coil temperature 115°C Thermal resistance < 85K/W Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage Voltage voltage resistance power VDC VDCmin. VDCmax. VDCmin. Ω±10% mW High sensitive version, 150mW 00 3 2.1 8.1 0.3 60 150 07 3.3 2.3 8.8 0.33 72 150 06 4.5 3.2 12.2 0.45 136 150 01 5 3.6 13.5 0.5 168 150 27 6 4.3 16.2 0.6 240 150 05 9 6.4 24.3 0.9 544 150 02 12 8.6 32.4 1.2 968 150 03 24 17.1 64.8 2.4 3872 150 04 48 34.1 129.6 4.8 15468 150 Sensitive version, 200mW 14 3 2 7 0.3 45 200 15 4.5 2.9 10.5 0.45 101 200 16 5 3.3 11.6 0.5 125 200 28 6 3.9 14 0.6 180 200 17 9 5.9 21 0.9 405 200 18 12 7.8 28 1.2 720 200 19 24 15.6 59.9 2.4 2880 200 20 48 31.2 112 4.8 11520 200 Sensitive version, 300mW 33 4.5 3.1 8.9 0.45 73 300 34 5 3.4 9.9 0.5 90 300 12 12 8.25 23.6 1.2 515 300 35 24 16.5 47.3 2.4 2060 300 36 48 32.5 54.6 4.8 8240 300 Standard version, 400mW 21 4.5 2.9 8.9 0.45 50 400 22 5 3.3 9.9 0.5 63 400 29 6 3.9 11.8 0.6 90 400 23 9 5.9 17.7 0.9 203 400 24 12 7.8 23.6 1.2 360 400 25 24 15.6 47.3 2.4 1440 400 26 48 31.2 94.6 4.8 5760 400 Standard version, 550mW 38 4.5 2.9 6.3 0.45 36 550 50 5 3.3 7 0.5 45 550 37 6 3.9 8.4 0.6 66 550 32 12 7.8 16.8 1.2 280 550 31 24 15.6 33.6 2.4 1050 550 30 48 31.2 67.2 4.8 4100 550 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Signal Relays Telecom-, Signal and RF Relays MT2 Relay 1.8 1.6 1.4 1.2 1.0 AXICOM 108-98006 Rev. E Unom. nominal coil voltage 2.2 2.0 1.8 1.6 1.4 1.2 1.0 Uno 0.8 0.8 0.6 MT2 Relay (Continued) Coil Operating Range 2.0 Coil Voltage [U/Unom] Coil Voltage [U/Unom] AXICOM Umax. at 2 x 1 A Umax. at 2 x 2 A 2.2 0.6 Uop. min. Urel. min. 0.4 0.2 0.4 0.2 0.0 0.0 -60 -50 -40 -30 -20 -10 0 -60 -50 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [°C] Coil Data (continued) Coil Data (continued) 3 3.2 150 mW Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.6 OM Signal and RF Relays Relay Coil Voltage [U/Unom] 2.4 2.2 AXICOM 2.0 Telecom-, Signal and RF Relays 1.8 1.6 MT2 Relay 108-98006 Rev. E 1.4 1.2 Unom. nominal coil voltage 1.0 2.6 2 1.8 1.6 1.4 1.2 Uop. min. Urel. min. 0.6 0.4 0.2 0.0 150 mW coil Ambient Temperature [°C]150 mW 2.8 3 150 mW coil 150 mW x. x. at 0 A at 2 x 1 A at 2 x 2 A OM ignal and RF Relays Relay Uop. min. Urel. min. Coil Voltage [U/U ] nom] nom ] nom Coil Voltage Coil [U/UVoltage [U/U x. mW coil Umax. at 0200 AmW 200 Umax. at 2 x 1 A Umax. at 2 x 2 A 300 mW coil Umax. at 0 A 300 mW Umax. at 2 x 1 A Umax. at 2 x 2 A 2.6 2.8 2.4 2.6 3.0 2.2 2.4 2.8 2.0 2.2 2.6 1.8 2 2.4 1.6 1.8 2.2 1.4 Umax. at 0 A Umax. at 2 x 1 A Rev. E Umax. at108-98006 2x2A 2.0 1.6 1.2 1.8 1.4 1.0 Unom. nominal coil voltage 1.6 1.2 0.8 Unom. nominal coil voltage 1.4 1 0.6 Unom. nominal coil voltage 0.2 1.0 0.6 0.0 0.8 0.4 0.4 0 3 -60 -50 -40 -30 -20 0 90 100 110 120 0.2 150 mW coil Uop. min. U Ambient Temperature [°C] Uop. min. Urel. -10 0 10 20 30 40 50 60 70 80 90 min. 100mW 110 200 coil120 -60 -50 -40 -30 -20 -10 0.6 0.2 C]150 mW 0.0 . 2.4 2.8 . . at 0 A at 2 x 1 A at 2 x 2 A Uop. min. Urel. min. 0 90 100 110 120 Coil Voltage [U/Unom] Voltage [U/U ] nom] nom] nom Coil Voltage [U/U Coil Coil Voltage [U/U . . C] Uop. min. Urel. min. 300 mW coil at 0 A mW at550 2 x5501mW A coil at 2 x 2 A at 0 A at 2 x 1 A . at 2 x 2 A . . 2.2 2.6 3.0 2 2.4 2.8 3.0 10 20 30 40 50 60 70 80 90 rel. 100 min.110 120 0 10 20 30 40 50 60 70 80 90 100 110 120 Umax. at 0 A300 mW coil Ambient Temperature [°C] Umax. at300 2 x 1mW A Umax. at 2 x 2 A 400 mW coil Umax. at400 0 A mW 1.8 2.2 2.6 2.8 1.6 2.0 2.4 2.6 1.4 1.8 2.2 2.4 1.2 1.6 2.0 2.2 1 1.4 1.8 2.0 Unom. nominal coil voltage Umax. at550 2 550 x mW 1mWAcoil max.at at20xA2 A UUmax. Umax. at 2 x 1 A UUmax. at02Ax 2 A max.at Umax. at 2 x 1 A Umax. at 2 x 2 A 0.8 1.2 1.6 1.8 Unom. nominal coil voltage 0.6 1.0 1.4 1.6 0.4 0.8 1.2 1.4 Unom. nominal coil voltage 0.2 0.6 1.0 1.2 00.8 0.4 1.0 nom.-40 -30 -20 -10 -60 -50 0.2 0.6 0.8 U Uop. min. Urel. min. Uop. min. nominal coil0 voltage 10 20 30 40 50 60 70 80Urel. 90 100 min.110 120 Ambient Temperature [°C] 0.0 0.4 0.6 -60 -50 -40 -30 -20 -10 0.2 0.4 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.0 1.8 108-98006 Rev. E 1.4 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 2.4 U nom 2.2 3.0 U max 2 2.8 1.8 U 2.6 op. min. 2.4 1.6 U 1.4 rel. min. 2.2 1.22.0 1 1.8 550 mW coil Uop. min. = Low the the Uop. min. Urel. min. Uop. min. Urel. min. Umax. at 0 A Umax. at 2 x 1 A Nominal coil voltage subject to All specifications change. Tyco Electronics for latest specifications. Umax. at 2 x 2Consult A Upper limit of the operative range of the coil 400 mW coil voltage (limiting mW voltage) when coils are continously 400 energized Lower limit of the operative range of Umax. at 0 A the coil voltage (reliable operate voltage) Umax. at 2 x 1 A Lower limit of the operative range Umax. of at 2 x 2 A the coil voltage (reliable release voltage) Unom. nominal coil voltage 0.8 1.6 Insulation Data 0.6 1.4 Uop. min. Initial dielectric strength 0.4 1.2 Urel. min. 0.21.0 between open 750Vrms Unom. nominal coilcontacts voltage 0.8 1250Vrms 0 between contact and coil -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 0.6-60between adjacent contacts 750Vrms Ambient Temperature [°C] Uop. min. Initial surge withstand voltage 0.4 Urel. min. 0.2 between open contacts 1050V 0.0 between contact and coil 1750V -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 3.0 between adjacent contacts 1050V 400 mW Ambient Temperature [°C] 2.8 Initial insulation resistance at 500VDC > 109Ω 2.6 Umax. at 0 A Capacitance 2.4 Umax. at 2 x 1 A between open contacts max. 2pF Unom =2.2 Nominal coil voltage Umax. at 2 x 2 A between contact and coil max. 4pF 2.0 adjacent contacts max. 2 pF Umax. =1.8 between Upper limit of the operative range of the coil voltage (limiting 400 mW coil 1.6 voltage) when coils are continously energized 1.4 RF= Data Uop. min. Lower limit of the operative range of 1.2 Isolation at voltage 100MHz/900MHz 1.0 U nom.coil nominal coil(reliable voltage operate voltage) the Insertion loss at 100MHz/900MHz 0.8 Urel. min. limit of the operative of Voltage standing wave ratiorange (VSWR) 0.6= Lower Uop. min. 0.4 atthe 100MHz/900MHz coil voltage (reliable release voltage) -31.8dB/-14.2dB -0.02dB/-0.97dB 1.03/1.31 Urel. min. 0.2 0.0 Other Data Ambient Temperature [°C] -60 -50 -40 -30 -20 -10 0 1.8 1.4 1.6 1.0 1.2 Uthe nom.coil nominal coil(reliable voltage operate voltage) voltage 0.8 1.0 Unom. nominal coil voltage 0.6 = Lower limit of the operative range of Urel. min. 0.8 0.4 0.6 0.2 0.4 0.0 0.2 0.0 Uop. min. Uop. min. Urel. min. the coil voltage (reliable release voltage) Urel. min. -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [°C] 0 10 20 30 40 50 60 70 80 -60 -50 -40 -30 -20 -10 10 20 30 40 50 60 70 80 90 100 110 120 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content IEC (halfoperate sine) the60068-2-27 coil voltage (reliable voltage) Shock resistance (destructive) Urel. min. = Lowertype limit of the operative range of Terminal Weight the coil voltage (reliable release voltage) Resistance to soldering heat THT IEC 60068-2-20 Ultrasonic cleaning Packaging unit 10g/30g 500g PCB-THT max. 5g 265 °C / 10 s not recommended 1000 pcs. 90 100 110 120 Unom = Nominal coil voltage All specifications subject to change. Consult Tyco Electronics for latest specifications. Umax. = Upper limit of the operative range of the coil voltage (limiting 2 at 0 A Rev. 1017 Electronics latest specifications. at 2 x 1 A for 10-2017, www.te.com at 2 x 2 A product voltage) when coils areDatasheets continouslyand energized specification 5 of 11 according to IEC 61810-1 and to be used © 2015 Tyco Electronics only range together Uop. min. =Corporation, Lower limit of the operative of with the ‘Definitions’ section. a TE Connectivity Ltd. company the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) Up vol mW Ambient Temperature Ambient [°C] 200Temperature [°C] Coil operative range graphs No Urel. min. = Low 1.2 Ambient Temperature [°C] 0 90 100 110 120 Umax. = refer to the Product Compliance Support Center at 400 mW Ambient Temperature [°C] Nominal coil voltage www.te.com/customersupport/rohssupportcenter 550 mW coil Unom = 550 mW Ambient Temperature [°C] 2.6 2.8 Umax. at 0 A Ambient temperature -55 to +85°C 2.4 Umax. at 2 x 1 A 2.6 environmental protection Umax. Category = Upper of limit of the operative range of the coil voltage (limiting Unom =2.4 Nominal coil voltage Umax. at 2 0 xA2 A 2.2 All specifications subject to change. Consult Tyco 5 ofIII11 61810 RT - wash tight Umax.Electronics at 2 x 1 A for latest specifications. IEC voltage) when coils are continously energized 2.0 2.2 atcoil 2x2 A Vibration resistance (functional) 10g, 10 to 500Hz Umax. =1.8 Upper limit of the operative range Uofmax. the voltage (limiting 2.0 Shock resistance Uop. min. = Lower limit of the(functional) operative range of 1.6 voltage) when coils are continously energized 0 90 100 110 120 U op. min. C]rel. min. U C]550 mW Unom = 1.6 2.6 Uop. min. 0 10 20 30 40 50 60 70 U 80 op. 100 110 120 U90rel. min. min. Ambient Temperature [°C] Urel. min. Uop. min. 1.2 = Lower limit of the operative range of 1.4 Uop. min. Urel. min. 2.2 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A Unom. nominal coil 1.0 voltage Unom. nominal coil voltage 2.8 0.0 0.2 3.0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 400 mW coil 0.0 2.8-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 3.0 Coil Voltage nom] nom] Coil Voltage [U/U[U/U 0 90 100 110 120 C]300 mW 0 200 mW Ambient Temperature [°C] 2.8 2.6 3.0 -60 -50 -40 -30 -20 -10 at 0 A at 2 x 1 A . at 2 x 2 A 300 mW coil 300 mW Uop. min. Urel. min. 1.2 0.4 0.8 550 mW coil 550 mW 0 0.0 110 120 3 -60 -50 -40 -30 -20 -10 0 10 -60 20 -50 30 -40 40 -30 50 -20 60 -10 700 80 10 90 20100 30mW 40coil 50 60 70 80 90 100 110 120 200 10 20 30 40 50 60 70 80 90 100 110 120 Coil Voltage [U/Unom] Coil Voltage [U/U nom] 3.0 0 Coil Voltage [U/Unom] 3.2 -60 -50 -40 -30 -20 -10 2.4 2.2 0.8 Coil Operating Range 2.6 2.4 1 200 mW 2.8 Coil Voltage [U/Unom] 2.8 2.8 Coil Voltage [U/Unom] 3.0 200 mW coil 3.0 150 mW coil Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 5 of 11 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Signal Relays AXICOM MT2 Relay (Continued) Terminal assignment TOP view on component side of PCB PCB layout TOP view on component side of PCB Dimensions Packing Product code structure Typical product code C934 22 Type C934 MT2 Series Signal Relay 2 form C, 2 CO, AgNi +Au contacts Coil Coil code: please refer to coil versions table 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 Signal Relays AXICOM MT2 Relay (Continued) Product code C93400 C93407 C93406 C93401 C93427 C93405 C93402 C93403 C93404 C93414 C93415 C93416 C93428 C93417 C93418 C93419 C93420 C93433 C93434 C93412 C93435 C93436 C93421 C93422 C93423 C93424 C93425 C93426 C93438 C93450 C93437 C93432 C93431 C93430 4 Version 2 form C (2CO) AgNi+Au contacts 10-2017, Rev. 1017 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Coil Coil power Sensitive 200mW Sensitive 300mW Standard 400mW Standard 550mW High sensitive Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 150mW Coil voltage 3VDC 3.3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 4.5VDC 5VDC 12VDC 24VDC 48VDC 4.5VDC 5VDC 9VDC 12VDC 24VDC 48VDC 4.5VDC 5VDC 6VDC 12VDC 24VDC 48VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1-1462001-2 1-1462001-3 2-1462000-2 1462000-1 5-1462000-6 2-1462000-0 1462000-7 1-1462000-3 1-1462000-8 1-1462001-1 3-1462000-0 3-1462000-1 5-1462000-7 3-1462000-6 3-1462000-7 4-1462000-1 4-1462000-5 6-1462000-6 6-1462000-8 2-1462000-6 7-1462000-0 7-1462000-2 4-1462000-7 4-1462000-8 5-1462000-0 5-1462000-1 5-1462000-3 5-1462000-5 7-1462000-7 8-1462000-5 7-1462000-6 6-1462000-2 6-1462000-1 5-1462000-9 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.