High Speed Backplane Connectors
Table of Contents
Z-PACK HM-Zd Connector
1
Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Z-PACK HM-Zd Connector
4, 3, and 2 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . .7-9
4 Pair Vertical Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . .10
4, 3, and 2 Pair Vertical Pin Header Assemblies . . . . . . . . . . . . . . .11-13
4, 3, and 2 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . .14-16
Power and Guide Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-23
“New” AdvancedTCA Connectors and Guide/Key Modules . . . . . .24, 25
4 and 2 Pair Pin Headers for Cable Assemblies . . . . . . . . . . . . . . . . . .26
4 and 2 Pair Vertical Pin Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
4 and 2 Pair Right Angle Pin Headers . . . . . . . . . . . . . . . . . . . . . . . .26
4 Pair 5 and 10 Column Push-to-Release Cable Assemblies . . . . . . . .27
2 Pair 5 and 10 Column Push-to-Release Cable Assemblies . . . . . . . .27
4 Pair Cable Assemblies for Backplane Testing . . . . . . . . . . . . . . . . . .27
Recommended Printed Circuit Board Layouts . . . . . . . . . . . . . . . . .28-38
PC Board Routing Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Connector Housing Gathering Capabilities . . . . . . . . . . . . . . . . . . . . . .40
Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Application Tooling and Equipment . . . . . . . . . . . . . . . . . . . . . . . . .42, 43
Compatible 2mm HM Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
5
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Product Line Overview
Product Facts
■
Z-PACK HM-Zd Connector is
an extension of the Z-PACK
2mm HM product line
■
Designed specifically for
high speed differential
applications
■
A modular connector system
with a standard module size
of 25.00 [.984]
■
Contact pitch is 1.50 [.059]
within a pair and 3.00
[.118] pair to pair within a
column; column to column
pitch is 2.50 [.098]
■
Card Pitch is less than
20.32 [.800] for 2 pair and
3 pair headers and 25.40
[1.000] for 4 pair headers
■
Available in three versions:
■ 2 signal contact pairs
per column (20 pairs per
25.00 [.984]) compatible
with 5 row Z-PACK
2mm HM Connector
■ 3 signal contact pairs
per column (30 pairs per
25.00 [.984])
■ 4 signal contact pairs
per column (40 pairs per
25.00 [.984]) compatible
with 8 row Z-PACK
2mm HM Connector
■
■
■
The Z-PACK HM-Zd
Connector System is a high
speed, differential connector system, which is compatible with the Z-PACK
2mm HM Connector Line.
Z-PACK HM-Zd Connector
provides Z-PACK 2mm HM
Connector users with a
migration path for serial
switching applications from
3.125 Gb/s to 10+ Gb/s.
The Z-PACK HM-Zd
Connector System features
a highly reliable dual beam
contact system with fully
encompassing grounds
dedicated to each differential pair. In addition, the
Z-PACK HM-Zd Connector
Availability
Fully validated SPICE models: E-mail requests to modeling@tycoelectronics.com
Available in vertical and
right angle press fit pin
headers and right angle and
vertical press fit receptacles
Samples: go to http://tycoelectronics.custhelp.com
Optimized footprint for
improved electrical
performance and ease of
trace routing (unobstructed
routing channels on both
daughtercard and
backplane)
Electrical Performance Report: http://hmzd.tycoelectronics.com
EPR #20GC014
Pin header and receptacle
have the exact same
footprint to simplify PC
board layout
■
Designed to meet Telcordia
requirements
■
Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
footprint is optimized for
both routability and system
performance with the use of
a 1.50 x 2.50 [.059 x .098]
row to column grid. The
connector design features a
robust mating interface with
integral prealignment and
polarization built into the
mating interface.
Pro/E models and IGES models: E-mail requests to TycoCAD@tycoelectronics.com
White Papers: available on product website at http://hmzd.tycoelectronics.com
Routing Guide: http://hmzd.tycoelectronics.com
Routing Guide #20GC015-1
http://hmzd.tycoelectronics.com
Technical Documents
Material and Finish
Ratings
Product Specification
108-2055
Application Specification
114-13059
Qualification Test Report
501-568
Contact Area Finish — 0.80µm Au
min. over 1.3µm Ni min.
Compliant Pin Finish — 0.8µm
SnPb min. over 1.3µm Ni min.
Contact Material — Copper Alloy
Housing Material — Glass filled
polyester, 94V-0 rated
Current — 0.7A per signal contact,
fully energized 2A per shield, all shields
energized
Operating Voltage —
500 VAC maximum, signal to signal
250 VAC maximum, signal to ground
Temperature — –65°C to 105°C
Mating Force — 0.38N maximum per
contact (signal = 1 contact, ground =
1 contact)
Durability — 250 cycles
* Reference Product Spec. 108-2055 for
complete list of performance data.
R
6
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector
4 Pair Right Angle
Receptacle Assemblies
0.75
Ref.
[.030]
1.00 ± 0.10
[.039 ± .004]
1
27.90
Ref.
[1.098]
15.67 ± 0.05
[.617 ± .002]
19.35 ± 0.08
[.762 ± .003]
1.50 Ref.
[.059] Typ.
Z-PACK HM-Zd Connector
2.50 Ref.
[.098] Typ.
21.35 ± 0.08
[.841 ± .003]
2.20
[.087]
3.00 Ref.
[.118] Typ.
2.00
Ref.
[.079]
Top Surface of
Daughtercard
A
8.70 Ref.
[.343]
1.50 Ref.
[.059] Typ.
10.70 ± 0.16
[.421 ± .006]
3.68
Ref.
[.145]
1.50 Ref.
[.059] Typ.
17.20 ± 0.14
[.677 ± .006]
1
All Plated
Thru Holes
1.50 ± 0.20
[.059 ± .008]
2.50
Typ.
[.098]
1
1.50
Typ.
[.059]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
9 x 2.50 [.098] =
22.50 [.886]
Recommended PC Board Layout
Daughter Board, Component Side Shown
1
2
Part Number
Column
Count
Module
Length
(Dim. A)
11469001-11
10
1469286-1
12
1469294-1
15
1469061-1
20
25.00
.984
30.00
1.181
37.50
1.476
50.00
1.969
Application Tooling2
Insertion
Repair
Housing
Chiclet
Receptacle
Removal
Removal
Signals
Grounds
80
40
91347-1
1583224-1
1583248-1
96
48
91347-3
1583224-2
1583248-1
120
60
91347-2
1583224-3
1583248-1
160
80
91347-4
1583224-4
1583248-1
AdvancedTCA Zone 2 Daughtercard Connector.
See page 43 for Instruction Sheet Number.
7
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
3 Pair Right Angle
Receptacle Assemblies
2.50 Ref.
[.098] Typ.
1.00 ± 0.10
[.039 ± .004]
0.75
Ref.
[.030]
1.50 Ref.
[.059] Typ.
23.40
Ref.
[.921]
11.17 ± 0.05
[.440 ± .002]
14.85 ± 0.08
[.585 ± .003]
16.85 ± 0.08
[.663 ± .003]
2.20
[.087]
3.00 Ref.
[.118] Typ.
8.70 Ref.
[.343]
1.50 Ref.
[.059] Typ.
1
All Plated
Thru Holes
1.50 Ref.
[.059] Typ.
10.70 ± 0.16
[.421 ± .006]
1.50 ± 0.20
[.059 ± .008]
12.70 ± 0.14
[.500 ± .006]
1.00 ± 0.10
[.039 ± .004]
23.22
Ref.
[.914]
1.50
Typ.
[.059]
2.50
Typ.
[.098]
9 x 2.50 [.098] =
22.50 [.886]
11.17 ± 0.05
[.440 ± .002]
14.85 ± 0.08
[.585 ± .003]
Recommended PC Board Layout
Daughter Board, Component Side Shown
1
3.68 Ref.
[.145]
2.00
Ref.
[.079]
Top Surface of
Daughtercard
A
2.20
[.087]
16.85 ± 0.08
[.663 ± .003]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
2.00
Ref.
[.079]
Top Surface of
Daughtercard
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
1.50 Ref.
[.059] Typ.
8.70 Ref.
[.343]
1.50 Ref.
[.059] Typ.
10.70 ± 0.16
[.421 ± .006]
3.68
Ref.
[.145]
12.52 ± 0.14
[.493 ± .006]
With Notch For PMC Applications
Part Number
Column
Count
Module
Length
(Dim. A)
1469081-1
10
25.00
.984
25.00
.984
1
1469514-11
1
2
10
Application Tooling2
Insertion
Repair
Housing
Chiclet
Receptacle
Removal
Removal
Signals
Grounds
60
30
91376-1
1583224-1
1673952-1
60
30
91376-1
1583224-1
1673952-1
For CompactPCI and AdvancedTCA PMC Applications.
See page 43 for Instruction Sheet Number.
CompactPCI is a trademark of PICMG-PCI Industrial Computer Mfg’s. Group.
8
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
2 Pair Right Angle
Receptacle Assemblies
2.50 Ref.
[.098] Typ.
1.00 ± 0.10
[.039 ± .004]
0.75
Ref.
[.030]
1
18.90
Ref.
[.744]
Z-PACK HM-Zd Connector
1.50 Ref.
[.059] Typ.
8.68
[.342] Ref.
11.35 ± 0.08
[.447 ± .003]
8.58 ± 0.05
[.338 ± .002]
13.35 ± 0.08
[.526 ± .003]
3.00 Ref.
[.118] Typ.
0.75
[.030]
10.70 ± 0.16
[.421 ± .006]
1.50 ± 0.20
[.059 ± .008]
2.50
Typ.
[.098]
9 x 2.50 [.098] =
22.50 [.886]
1
Part Number
Module
Length
(Dim. A)
1469028-1
10
1469077-1
20
25.00
.984
50.00
1.969
1
8.20 ± 0.14
[.323 ± .006]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Daughter Board, Component Side Shown
Column
Count
2.20
Ref.
[.087]
1.50 Ref.
[.059] Typ.
1
All Plated
Thru Holes
1.50
Typ.
[.059]
3.68
Ref.
[.145]
2.00
Ref.
[.079]
8.70 Ref.
[.343]
1.50 Ref.
[.059] Typ.
Top Surface of
Daughtercard
A
Application Tooling1
Insertion
Repair
Housing
Chiclet
Receptacle
Removal
Removal
Signals
Grounds
40
20
91350-1
1583224-1
1583249-1
80
40
91350-2
1583224-4
1583249-1
See page 43 for Instruction Sheet Number.
9
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
4 Pair Vertical
Receptacle Assemblies
2.50 Ref.
[.098] Typ.
0.75
Ref.
[.030]
1.50 Ref.
[.059] Typ.
21.35
[.841]
A
19.35
[.762]
1.00
[.039]
14.97
[.589]
2.50
[.098]
22.50
[.886]
1.50
[.059]
7.50
[.295]
1
Finished
Hole Dia.
Outline of Connector
22.50
[.886]
1
22.50
Ref.
[.886]
16.50
[.650]
3.75
[.148]
Ref.
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
10
2.50
[.098]
1
1.50
[.059]
22.50
[.886]
Recommended PC Board Layout
Part Number
Column
Count
Module
Length
(Dim. A)
Signals
Grounds
1469362-1*
10
25.00
.984
80
40
Application Tooling1
Insertion
Repair
Housing
Receptacle
Removal
1804401-1
1804402-1
See page 43 for Instruction Sheet Number.
* RoHS Compliant.
1
10
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
4 Pair
Vertical Pin Header
Assemblies
2.50 Ref.
[.098] Typ.
1
1.50 Ref.
[.059] Typ.
Z-PACK HM-Zd Connector
2.50
Ref.
[.098]
5.675 Ref.
[.223]
23.43
Max.
[.922]
3.00 Ref.
[.118] Typ.
0.08
19.65 +– 0.20
.003
[.774 +– .008
]
1.50 Ref.
[.059] Typ.
0.75
Ref.
[.030]
A
6.35
[.250]
Ref.
2.95 ± 0.05
[.116 ± .002]
13.40 ± 0.08
[.528 ± .003]
9 x 2.50 [.098] =
22.50 [.886]
2.50
Typ.
[.098]
1.50
Typ.
[.059]
1
All Plated
Thru Holes
11469002-11
2
1469046-12
1469074-1
1469287-1
1469296-1
1469062-1
1469099-1
1
2
3
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
2.50
.098
2.50
.098
1.80
.071
2.50
.098
2.50
.098
2.50
.098
1.80
.071
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
5.30
.209
10
25.00
.984
25.00
.984
25.00
.984
30.00
1.181
37.50
1.476
50.00
1.969
50.00
1.969
10
10
12
15
20
20
Signals
Grounds
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Backplane Component Side Shown
Part
Number
1
Insertion
Pin
Header
Application Tooling3
Repair
Pin
Housing
Removal
Removal
Pin
Insertion
80
40
91349-1
1583237-1
1583220-1
1583255-1
80
40
91349-1
1583237-1
1583220-1
1583255-1
80
40
91349-1
1583237-1
1583220-1
1583255-1
96
48
91349-3
1583237-1
1583220-1
1583255-1
120
60
91349-2
1583237-1
1583220-1
1583255-1
160
80
91349-4
1583237-1
1583220-1
1583255-1
160
80
91349-4
1583237-1
1583220-1
1583255-1
AdvancedTCA Zone 2 Backplane Connector.
Shallow Wall for Daughtercards thicker than 3.50 [.138].
See page 43 for Instruction Sheet Number.
11
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
3 Pair
Vertical Pin Header
Assemblies
2.50 Ref.
[.098] Typ.
2.50
Ref.
[.098]
1.50 Ref.
[.059] Typ.
5.675
Ref.
[.223]
18.93
Max.
[.745]
3.00 Ref.
[.118] Typ.
1.50 Ref.
[.059] Typ.
0.75
Ref.
[.030]
2.95 ± 0.05
[.116 ± .002]
6.35
[.250]
Ref.
A
13.40 ± 0.08
[.528 ± .003]
9 x 2.50 [.098] =
22.50 [.886]
2.50
Typ.
[.098]
1.50
Typ.
[.059]
1
1
All Plated
Thru Holes
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Recommended PC Board Layout
Backplane, Component Side Shown
Part
Number
Tail
Length
Mating
Pin
Length
1469083-1
2.50
.098
1.80
.071
5.30
.209
5.30
.209
1469085-1
1
Column
Count
10
10
Module
Length
(Dim. A)
25.00
.984
25.00
.984
Signals
Grounds
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Insertion
Pin
Header
Application Tooling1
Repair
Pin
Housing
Removal
Removal
Pin
Insertion
60
30
91375-1
1583237-1
1725634-1
1583255-1
60
30
91375-1
1583237-1
1725634-1
1583255-1
See page 43 for Instruction Sheet Number.
12
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
2 Pair
Vertical Pin Header
Assemblies
1
Z-PACK HM-Zd Connector
2.50 Ref.
[.098]
2.50 Ref.
[.098] Typ.
1.50 Ref.
[.059] Typ.
5.675
Ref.
[.223]
15.43
Max.
[.607]
0.08
11.65 +– 0.20
1.50 Typ.
[.059] Ref.
+ .003
[.459 – .008 ]
3.00 Ref.
[.118] Typ.
0.75
Ref.
[.030]
A
6.35
Ref.
[.250]
2.95 ± 0.05
[.116 ± .002]
13.40 ± 0.08
[.528 ± .003]
9 x 2.50 [.098] =
22.50 [.886]
2.50
Typ.
[.098]
1
1
All Plated
Thru Holes
1.50
Typ.
[.059]
Recommended PC Board Layout
Backplane
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
1469025-1
2.50
.098
1.80
.071
2.50
.098
1.80
.071
5.30
.209
5.30
.209
5.30
.209
5.30
.209
10
25.00
.984
25.00
.984
50.00
1.969
50.00
1.969
1469076-1
1469078-1
1469101-1
1
10
20
20
Signals
Grounds
Insertion
Pin
Header
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
Application Tooling1
Repair
Pin
Housing
Removal
Removal
Pin
Insertion
40
20
91348-1
1583237-1
1583234-1
1583255-1
40
20
91348-1
1583237-1
1583234-1
1583255-1
80
40
91348-4
1583237-1
1583234-1
1583255-1
80
40
91348-4
1583237-1
1583234-1
1583255-1
See page 43 for Instruction Sheet Number.
13
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
4 Pair
Right Angle Pin Header
Assemblies
2.50 Ref.
[.098] Typ.
34.55
Ref.
[1.360]
1.65 Ref.
[.065] Typ.
17.32
[.682]
Ref.
1.50 Ref.
[.059] Typ.
19.65
Ref.
[.774]
2.20
[.087]
Ref.
23.35
Ref.
[.919]
17.68
[.696]
Ref.
3.00 Ref.
[.118] Typ.
5.30
[.209]
Ref.
Top Surface of
Daughtercard
A
6.35
[.250]
Ref.
10.45
Ref.
[.411]
2.00
[.079]
Ref.
1.50 Ref.
[.059] Typ.
5.675 Ref.
[.223]
1.50 Ref.
[.059] Typ.
17.20
Ref.
[.677]
6.90
Ref.
[.272]
1
All Plated
Thru Holes
1.50 ± 0.20
[.059 ± .008]
1
1.50
[.059]
2.50
Typ.
[.098]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
9 x 2.50 [.098] =
22.50 [.886]
Recommended PC Board Layout
Component Side Shown
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
1469048-1
2.20
.087
2.20
.087
5.30
.209
5.30
.209
10
25.00
.984
30.00
1.181
1469375-1
1
12
Signals
Grounds
Insertion
Pin
Header
Application Tooling1
Repair
Housing
Removal
Chiclet
Removal
80
40
91378-1
1804174-1
1804177-1
96
48
91378-3
1804174-1
1804177-1
See page 43 for Instruction Sheet Number.
14
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
3 Pair
Right Angle Pin Header
Assemblies
1
Z-PACK HM-Zd Connector
2.50 Ref.
[.098] Typ.
30.05
Ref.
[1.183]
1.65 Ref.
[.065] Typ.
13.31
Ref.
[.524]
1.50 Ref.
[.059] Typ.
15.15
Ref.
[.596]
2.20
[.087]
Ref.
18.99
Ref.
[.747]
3.00 Ref.
[.118] Typ.
5.30
[.209]
Ref.
Top Surface of
Daughtercard
A
6.35
[.250]
Ref.
10.45
Ref.
[.411]
2.00
[.079]
Ref.
1.50 Ref.
[.059] Typ.
6.90
Ref.
[.272]
5.675 Ref.
[.223]
1.50 Ref.
[.059] Typ.
12.70
Ref.
[.500]
1
All Plated
Thru Holes
1.50 ± 0.20
[.059 ± .008]
2.50
Typ.
[.098]
1
1.50
Typ.
[.059]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
9 x 2.50 [.098] =
22.50 [.886]
Recommended PC Board Layout
Component Side Shown
1
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
Signals
1469183-1
2.20
.087
5.30
.209
10
25.00
.984
60
Grounds
30
Insertion
Pin
Header
Application Tooling1
Repair
Housing
Removal
1804179-1
1804173-1
Chiclet
Removal
1804176-1
See page 43 for Instruction Sheet Number.
15
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
2 Pair
Right Angle Pin Header
Assemblies
25.55
Ref.
[1.006]
1.65 Ref.
[.065] Typ.
2.50 Ref.
[.098] Typ.
1.50 Ref.
[.059] Typ.
9.81
Ref.
[.386]
2.20
[.087]
Ref.
11.65
Ref.
[.459]
15.49
Ref.
[.610]
3.00 Ref.
[.118] Typ.
5.30
[.209]
Ref.
Top Surface of
Daughtercard
A
6.35
[.250]
Ref.
10.45
Ref.
[.411]
1
5.675 Ref.
[.223]
1.50 Ref.
[.059] Typ.
1.50 Ref.
[.059] Typ.
6.90
Ref.
[.272]
8.20
Ref.
[.323]
All Plated
Thru Holes
1.50 ± 0.20
[.059 ± .008]
2.50
Typ.
[.098]
2.00
[.079]
Ref.
1
1.50
[.059]
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.0375 ± 0.0125 [.00148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-13059.
9 x 2.50 [.098] =
22.50 [.886]
Recommended PC Board Layout
Component Side Shown
1
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
(Dim. A)
Signals
1469169-1
2.20
.087
5.30
.209
10
25.00
.984
40
Grounds
20
Insertion
Pin
Header
Application Tooling1
Repair
Housing
Removal
91377-1
1804171-1
Chiclet
Removal
1804175-1
See page 43 for Instruction Sheet Number.
16
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
1
Universal Power Module
Vertical Receptacle (3 Pos.)
Z-PACK HM-Zd Connector
The Tyco Electronics
Universal Power Module is
a three position, modular,
Hard Metric board-to-board
power connector designed
to be compatible with
Z-PACK 2mm HM
Connectors. The design is
in an “inverse-sex” orientation and the vertical receptacle module meets the IEC
950 safety requirements for
finger probe protection.
The right angle header
contacts are available with
sequenced lengths for
“make-first/break-last”
applications.
Generous alignment features
designed into the housings
and optional guide pins
and receptacles make the
Tyco Electronics Universal
Power Module ideal for
“blind mating” applications.
Both the headers and receptacle utilize Tyco Electronics
ACTION PIN press-fit leads
for ease of assembly onto
printed circuit boards.
Additionally, the vertical
receptacle leads are polarized to allow only one orientation onto the printed
circuit board, eliminating
the possibility of reverse
placement.
The Universal Power
Module is compatible with
a wide variety of other
Tyco Electronics board-toboard connectors including
Z-PACK HS3, Z-PACK
HM-Zd, Z-PACK Strip-line
100, AMP-HDI, TBC,
TBC Plus and Eurocard
connectors.
3.70
[.146]
9.95
[.392]
11.35
[.447]
9.62
[.379]
Mating Point
9.50
[.374]
12.15
[.478]
3.00
[.118]
2.00
[.079]
The housings are thermoplastic and the contacts are
offered in either a standard
or high current copper
alloy. Contact finish is gold
over nickel on the mating
surfaces. The contacts
are designed to carry 10
amperes per contact in
standard assemblies and
15 amperes per contact in
the high current assemblies.
Actual values may vary
depending upon connector
size, board design, etc.
Vertical
Receptacle
Outline
Vertical
Receptacle
High Current
Position
Loaded
ABC
AC
ABC
Part
Numbers
223955-2
223984-1
5-223955-2
6.00
[.236]
3.00
[.118]
2.50 Ref.
[.098]
Ref.
1
Top Surface of
Daughtercard
Ref.
Plated Thru Hole
(12 Plcs.)
1.50 Ref.
[.059]
Ref.
Recommended PC Board Hole Layout
1
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-1103.
17
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
3.00
[.118]
(Continued)
0.50
[.020]
Expanded Universal Power
Module Vertical Receptacles
2.00
2.00 [.079]
[.079]
Material and Finish
Ø 0.20 At Post
[.008] Tip Typ.
11.35 ± 0.08
[.447 ± .003]
Housing — Polyester, gray
Contact — Copper alloy, plated
0.00127 [.000050] min. gold in mating
area, 0.00050 [.000020] min. tin-lead
on ACTION PIN area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B ± 0.05
[± .002]
Related Product Data
9.95 ± 0.05
[.392 ± .002]
0.75
[.030]
3.00
Typ.
[.118]
9.62 ± 0.30
[.379 ± .012]
3.70 ± 0.28
[.146 ± .011]
1.00
Ref.
[.039]
A
Spaces
At
3.00
[.118]
12.15 ± 0.05
[.478 ± .002]
Mating Point
0.75
Ref.
[.030]
Guiding Hardware (Optional) —
pages 21-23
Application Tooling
2.50
Ref.
[.098]
Header
Seating Tool, 224441-1
Board Support Fixture, 224442-1
Receptacle
Seating Tool, 224421-1
Board Support Fixture, 217602-1
3.00
[.118]
2.00
[.079]
2.00
1
[.079]
Plated Through Hole
48 Plcs.
Top Surface of
Daughter Card
Ref.
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
1
Technical Documents
A
Spaces
At
3.00
[.118]
Product Specification
108-1651
Application Specification
114-1103
Tyco Electronics Instruction Sheet
408-4169 (Receptacle
Seating Tool 224421-1)
Note: For finishes other than
tin-lead, reference Application
Specification 114-1103.
1.50
Ref.
[.059]
Recommended PCB Hole Layout
Position
A
B
Ref.
Standard
*10A
Part Number
High Current
*15A
Part Number
4
3
223995-1
120953-1
5
4
223995-2
120953-2
6
5
223995-3
120953-3
7
6
223995-4
120953-4
8
7
12.50
.492
15.50
.610
18.50
.728
21.50
.846
24.50
.965
223995-5
120953-5
*Reference Product Specification 108-1651.
Note: For additional Power Module
options reference Catalog
1773096, "Power Connectors
and Interconnection
Systems,” or contact your
Tyco Electronics Sales
Representative.
18
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
(Continued)
1
3.00
[.118]
Z-PACK HM-Zd Connector
Universal Power Module
Right Angle Headers (3 Pos.)
12.00
Max.
[.472]
3.00
[.118]
Material and Finish
Housing — polyester, natural color
Contacts — Copper alloy, plated
0.00127 [.000050] min. gold in mating
area, 0.00050 [.000020] min. tin-lead
on ACTION PIN post area, with entire
contact underplated 0.00127 [.000050]
min. nickel
14.60 ± 0.13
[.575 ± .005]
12.00 ± 0.08
[.472 ± .003]
10.90
Ref.
[.429]
9.70 ± 0.08
[.382 ± .003]
6.00
Typ.
[.236]
2.25
[.089]
Position A
Position B
9.75 ± 0.05
[.384 ± .002]
1.50
[.059]
3.22 ± 0.25
2.00
Typ.
[.127 ± .010]
[.079]
11.70 ± 0.08
[.461 ± .003]
Position C
4.00
Ref.
[.157]
15.70
[.618]
2.00
Typ.
[.079]
3.50
[.138]
1
All Plated
Through Hole
12 Plcs.
3.00
Typ.
[.118]
1.50
[.059]
1
3.00
[.118]
2.98 Ref.
[.117] 2 Plcs.
Ø 2.00 ± 0.05 Thru Hole
[.079 ± .002] 2 Plcs.
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-1103.
Recommended PC Board Hole Layout
Blade Length Dimensions
Position A
Position B
Position C
Note: For additional Power Module
options reference Catalog
1773096, "Power Connectors
and Interconnection
Systems,” or contact your
Tyco Electronics Sales
Representative.
10.90 [.429]
10.90 [.429]
10.90 [.429]
10.90 [.429]
10.90 [.429]
10.90 [.429]
9.30 [.429]
9.30 [.366]
9.30 [.366]
9.30 [.366]
9.30 [.366]
9.30 [.366]
7.68 [.302]
7.68 [.302]
7.68 [.302]
10.90 [.429]
9.30 [.366]
9.30 [.366]
7.68 [.302]
7.68 [.302]
7.68 [.302]
10.90 [.429]
10.90 [.429]
9.30 [.366]
—
9.30 [.366]
7.68 [.302]
9.30 [.366]
7.68 [.302]
7.68 [.302]
10.90 [.429]
10.90 [.429]
9.30 [.366]
10.90 [.429]
9.30 [.366]
7.68 [.302]
9.30 [.366]
7.68 [.302]
9.30 [.366]
9.30 [.366]
7.68 [.302]
9.30 [.366]
7.68 [.302]
9.30 [.366]
7.68 [.302]
Standard
*10A
Right Angle Header
Part Numbers
223961-1
223962-1
223968-1
223972-1
223971-1
223970-1
223963-1
223964-1
223967-1
223975-1
223981-1
223965-1
223983-1
223980-1
223974-1
High Current
*15A
Right Angle Header
Part Numbers
5-223961-1
—
—
—
—
—
—
—
—
—
—
—
—
—
5-223974-1
*Reference Product Specification 108-1651.
19
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
22.34
[.880]
(Continued)
Expanded Universal Power
Module Right Angle Headers
A Max.
3.00
Typ.
[.118]
Material and Finish
Housing — Polyester, gray
Contacts — Phosphor bronze, plated
0.00127 [.000050] min. gold in mating
area, 0.00054 [.000021] min. tin-lead
on ACTION PIN area, with entire contact
underplated 0.00127 [.000050] min.
nickel
11.38
Ref.
[.448]
13.00
Ref.
[.512]
0.04 ± 0.10
[.016 ± .004]
Typ.
14.60 ± 0.13
[.575 ± .005]
12.00 ± 0.08
[.472 ± .003]
1.20 Min.
[.047] 4 Plcs.
10.90
Ref.
[.429]
Related Product Data
6.00
[.236]
Typ.
Guiding Hardware (Optional) —
pages 21-23
9.70 ± 0.08
[.382 ± .003]
10.26
Typ.
[.404]
14.33
[.564]
Ref.
Application Tooling
Header
Seating Tool, 224441-1
Board Support Fixture, 224442-1
Receptacle
Seating Tool, 224421-1
Board Support Fixture, 217602-1
B
1.50
[.059]
Technical Documents
Product Specification
108-1651
Application Specification
114-1103
Tyco Electronics Instruction Sheet
408-4169 (Receptacle
Seating Tool 224421-1)
2.25
[.089]
3.13
[.123]
2.00
Typ.
[.079]
3.22 ± 0.25
4.00
± .010]
Ref. [.127
[.157]
11.70 ± 0.08
[.461 ± .003]
3.50
[.138]
15.70
[.618]
2.00
Typ.
[.079]
1
All Plated
Through Hole
16 Plcs.
1.50
[.059]
6.00
[.236]
1
3.00 Typ.
[.118]
2.98 Ref.
[.117] 2 Plcs.
Ø 2.00 ± 0.05 Thru Hole
[.079 ± .002] 2 Plcs.
PCB Hole Dim.
Drilled Hole = 0.7000 ± 0.025 [.02756 ± .0010]
Finished Hole = 0.60 ± 0.05 [.024 ± .002]
Cu Thickness = 0.375 ± 0.0125 [.0148 ± .00049]
SnPb Thickness = 0.007 ± 0.003 [.0003 ± .0001]
Note: For finishes other than
tin-lead, reference Application
Specification 114-1103.
Recommended PC Board Hole Layout
Positions
4
5
6
7
Note: For additional Power Module
options reference Catalog
1773096, "Power Connectors
and Interconnection
Systems,” or contact your
Tyco Electronics Sales
Representative.
8
Dimensions
A
B
15.00
.591
18.00
.709
21.00
.827
24.00
.945
27.00
1.063
12.75
.502
15.75
.620
18.75
.738
21.75
.856
24.75
.974
Standard
*10A
Base Part Number1
High Current
*15A
Base Part Number1
646954
120954
2
646955
120955
2
646956
120956
2
646957
120957
2
646958
120958
2
Dash number indicates sequence pattern. See customer drawing for specific dash numbers.
RoHS Compliant.
*Reference Product Specification 108-1651.
1
2
20
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
1
(Continued)
Z-PACK HM-Zd Connector
Guide Pin (Unkeyed)
See Chart
7.80 Dia.
[.307]
Material and Finish
Guide Pin — Passivated stainless steel
Part Number 223956-1
4.85 Dia.
[.191]
Dia.
LOCTITE sealant
applied in this area.
B
A
Dimension
A
B
7.50 [.295]
24.73 [.974]
9.20 [.362]
25.16 [.991]
12.70 [.500]
25.16 [.991]
12.70 [.500]
25.16 [.991]
6.20 [.244]
25.16 [.991]
12.70 [.500]
31.25 [1.230]
3.803 [.150]
27.16 [1.069]
2.003 [.079]
27.16 [1.069]
1
2
3
Thread
Part Numbers
M4 x 7-6g
M4 x 7-6g
8-32 UNC-2A
M4 x 7-6g
M4 x 7-6g
8-32 UNC-2A
M4 x 7-6h
M3 x 0.5
223982-1 1, 2
223969-7 2
223969-4 2
223969-1 2
223956-1 2
1-223969-0 2
120646-1 2
223988-1 2
6.35 Hex Base.
RoHS Compliant.
Internal Thread.
Female Guide Module
(Unkeyed)
Material and Finish
Guide Module — Zinc alloy, chromate
conversion coated
7.90
[.311]
Related Product Data
Application Tooling —
Seating Tool, 224440-1.
Board Support Fixture, 217603-1.
Technical Documents
Product Specification
108-1651
Application Specification
114-1103
Part Number 223957-1
(as shown)
Part Number 223979-1
(dual alignment posts)
9.70
[.382]
5.50
[.217]
5.40 Dia.
[.213]
4.00
[.157]
3.95
Ref.
[.156]
3.175 ± 0.08 Dia.
[.125 ± .003]
Drilled Hole
2 Plcs.
4-40 UNC-2B
34.20
[1.346]
15.00
[.591]
5.75
[.226]
11.00
[.443]
Recommended PC Board Hole Layout
21
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
(Continued)
Ø 4.85 ± 0.05
[.191 ± .002]
6.35
[.250]
A
B
24° Ref.
Guide Pin (Unkeyed)
3.85
[.152]
5.92 ± 0.08
[.233 ± .003]
Ø 4.82 ± 0.05
[.190 ± .002]
R 0.50
[.020]
Material and Finish
Guide Pin — Zinc alloy, chromate
conversion coated
Part Number 223985
Dimension
A
B
25.16
20.39
.991
.803
29.00
24.23
1.142
.954
0.04
Ø 8.70 +– 0.10
+ .002
[.343 – .004 ]
1.00
[.039]
Part
Number
223985-1
1.70
[.067]
4.14 ± 0.05
[.163 ± .002]
Ø 1.10 ± 0.05
[.043 ± .002]
Ø 1.00
[.039]
45° Typ.
6-32 UNC-2B
6.00
Deep
[.236]
0.50
[.020]
3.85 ± 0.05
[.152 ± .002]
CL Row E HM Connector
Ø 5.00 ± 0.05
[.197 ± .002]
223985-3
Recommended PC Board Layout
(Position Shown Used with
Part Number 223986-1)
Female Guide Module
(Unkeyed)
34.20
[1.346]
26.70
[1.051]
Material and Finish
Guide Module — Zinc alloy, chromate
conversion coated
Part Number 223986
A
0.05
7.90 +– 0.10
9.70 ± 0.08
[.382 ± .003]
+ .002
[.311 – .009 ]
Ø 5.40 ± 0.08
[.213 ± .003]
2.82
Ref.
[.111]
4.00
[.157]
Dim.
A
0°
45°
90°
135°
180°
225°
270°
315°
0°
45°
90°
135°
180°
225°
270°
315°
Thread
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
M2.6
M2.6
M2.6
M2.6
M2.6
M2.6
M2.6
M2.6
Part
Number
223986-1
223986-2
223986-3
223986-4
223986-5
223986-6
223986-7
223986-8
120913-1
120913-2
120913-3
120913-4
120913-5
120913-6
120913-7
120913-8
Ø 7.40 ± 0.08
[.291 ± .003]
5.50
[.216]
4.40 ± 0.05
[.173 ± .002]
3.37 ± 0.08
[.133 ± .003]
15.00
[.591]
16.75
[.659]
1.67
[.066]
3.02 ± 0.10
[.119 ± .004]
2 Plcs.
Threaded Hole — See Table
7.50
[.295]
11.00
[.433]
15.00
[.591]
Ø 3.175 ± 0.08
[.125 ± .003]
2 Plcs.
5.75
[.226]
Footprint
22
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Power and Guide Hardware
(Continued)
7.40
[.291]
A
1
0.80 ± 0.015 Rad.
[.031 ± .0006]
Ø 5.15 ± 0.05
[.203 ± .002]
Z-PACK HM-Zd Connector
3.80 ± 0.05 Rad.
[.150 ± .002]
PCB Layout for Guidepost
2.00
[.079]
Note: Key hole orientation (Dim. A)
per mating guide module Part
Number table (Orientation
shown on PCB layout is for
Part Number 1410297-2).
32.00
[1.260]
1410773 Series
Contact, ESD
Housing
Hole for Positive
Retention Screw
6.00
[.236]
18.40
[.724]
4.00
2 Plcs.
[.157]
3.70
[.146]
Ground Pad
Ø 5.00 [.197] on
Retention Hardware
Side of PCB
Ø 3.96 ± 0.05
2 Plcs.
[.156 ± .002]
Ø 3.96 ± 0.05
[.156 ± .002]
-Z-
5.50
[.217]
5.63
[.222] 12.25
[.482] 5.00
[.197]
31.88
[1.255]
16.13
[.635]
-YEdge of Daughtercard
12.50
[.492]
10.70
[.421]
Top of Motherboard
5.63 Ref.
[.222]
PCB Layout
Connector Side
12.25
[.482]
Ref.
1410297 Series
32.00
[1.260]
5.70
[.224]
A
Ø 5.15 ± 0.05
[.203 ± .002]
6.50
[.256]
3.80 ± 0.05 Rad.
[.150 ± .002]
6.99
[.275]
4.65
[.183]
0.80 ± 0.015 Rad.
[.031 ± .0006]
PCB Layout for Guidepost
Note: Key hole orientation (Dim. A)
per mating guide module Part
Number table (Orientation
shown on PCB layout is for
Part Number 1410297-2).
28.95
[1.140]
1410548 Series
MULTIGIG RT Guide Modules
Description
Keyed/ESD Guide Module Assembly, 20.30 [.799] Daughtercard*
Keyed Guide Pin, Backplane Connector, Threaded Post**
Keyed Guide Pin, Die Cast, Rolling Thunder, Backplane Connector**
Part Number
1410297-X
1410773-X
1410548-X
* See customer drawing for specific keying options.
** Internal and external threaded versions available, see customer drawings for available options.
23
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
“NEW” AdvancedTCA
Connectors
!
W
E
N
AdvancedTCA Zone 2
Front Board Connector
4 Pair Right Angle Receptacle
Part Number 1469001-1
See page 7 for more details
Front Board Connector
Backplane Connector
Backplane Connector
4 Pair Vertical Header
Part Number 1469002-1
See page 11 for more details
AdvancedTCA Guide/Keying
Modules
The AdvancedTCA Guide
Modules can be used in a
wide variety of applications.
For motherboard-todaughtercard applications
the vertical pin and right
angle socket are used. This
popular configuration is
further supported by our
wide offering of available
keying positions. Each of
the two keyed guide pins
and guide sockets per
module can be produced
in a variety of different key
positions. For co-planar
applications, the right angle
guide pins are used along
with the right angle guide
sockets. Both vertical and
right angle guide pins are
available in short or long
sizes, to accommodate
being used with different
Tyco Electronics connectors.
*
rA1
A2 (RTM)
K1/K2
rK1
A1
A2
ATCA Name
ATCA Location
rA1
Backplane
rA1
Backplane
rA1
Backplane
A2 (RTM)
K1/K2
K1/K2
rK1
A1
A2
Rear Transition Module
Front Board
Front Board
Rear Transition
Backplane
Mid-Plane
Description
Rear Alignment Post
3.00 – 4.00 [.118 – .157] PCB Thickness
Rear Alignment Post
4.10 – 6.00 [.161 – .236] PCB Thickness
Rear Alignment Post
6.10 – 8.00 [.240 – .315] PCB Thickness
Right Angle Male, Keyed
Right Angle Female, Keyed
Right Angle Female, Unkeyed Dummy
Right Angle Female
Vertical Male, Keyed, Short
Vertical Male, Keyed, Long
Part Number
1469269-2*
1469269-4*
1469269-6*
1-1469372-1*
1-1469373-1*
9-1469373-9*
1469374-1*
1-1469387-1*
1-1469388-1*
RoHS Compliant.
24
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
AdvancedTCA
Power Connectors (Zone 1)
22.20
[.874]
46.10
Ref.
[1.815]
See Note 2
1
13 17 21
25
20.90
[.823] Max.
Part Number 1766501-1*
28
1
32 33
34
27
26
16 20 24
29
Material and Finish
10.45
[.411] Max.
30
1.00
[.039]
Z-PACK HM-Zd Connector
Backplane Connector
Straight, Compliant Press Fit,
6.02
[.237]
31
4
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.0076 [.000030]
min. gold in mating area per
Tyco Electronics Specification 112-162-5,
over 0.00130 [.000050] min. nickel per
Tyco Electronics Specification 112-25-2
Solder tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated per lead
free Tyco Electronics Specification
112-65-1, matt finish
Notes:
1. Mounting Holes (Ø2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
17.50
[.689] Max.
28.60
[1.126]
Max.
4.60
[.180]
5.30
[.207]
See Note 1
3.90
[.154]
9.59
[.378]
6.60
[.260]
2.00
[.079]
2.20
[.087]
6.60
[.260]
6.00
[.236]
Ø 2.50
[.098] 2 Plcs.
4.50
4.50 [.177]
[.177]
Ø 1.60
[.063] 8 Plcs.
10.00
[.394] 12.00
14.50 [.472]
3.00 [.571]
[.118] 9.40
13.70 [.370]
2.20
[.087]
3.90 Ø 1.00
[.154] [.039]
26 Plcs.
Ø 1.75
[.069]
[.539]
18.50
[.728]
21.20
[.835]
22.55
[.888]
23.90
[.941]
26.60
[1.047]
Printed Circuit Layout
Front Board Connector
Right Angle,
Compliant Press Fit
46.10
Ref.
[1.815]
33
30
28
34
Insulators — Thermoplastic, glass
reinforced, black, UL94V-0
Signal Pins — Copper alloy
Power Contacts — High conductivity
copper alloy, plated 0.00076 [.000030]
min. gold in mating area per
Tyco Electronics Specification 112-162-5,
over 0.00130 [.000050] min. nickel per
Tyco Electronics Specification 112-25-2
Solder Tails — 0.0030 - 0.0043
[.000120 - .000170] tin plated per lead
free Tyco Electronics Specification
112-65-1, matt finish
Notes:
1. Mounting Holes (Ø 2.00 [.079] x
5.00 [.197] DP) for use with self
tapping screw (customer supplied).
2. Positions 1–4 not populated and
reserved for future use.
31
25 21 17 13
20.90
[.823] Max.
27
32
Material and Finish
RoHS Compliant
41.30
Max.
[1.626]
1
10.45
[.411] Max.
Part Number 1766500-1*
*
See Note 1
29
4.60 5.30
[.180] [.207]
26 24 20 16
4
17.50
[.689] Max.
23.90
[.941]
18.50
[.728]
18.65
[.734]
26.60
[1.047]
See Note 2
21.20
[.835]
13.70
[.539]
9.40
[.370]
3.00
[.118]
12.00
[.472]
Ø 1.60
[.063] 8 Plcs.
Ø 1.00
[.039] 26 Plcs.
2.20
[.087]
4.50
[.177] 4.50
[.177]
Ø 2.50
2
[.098] Plcs.
2.00
[.079]
6.00
[.236] 10.00
13.40
[.528]
28.60
[1.126]
Max.
22.55
[.888]
Ø 1.70
[.067]
2 Plcs.
24.50
[.965]
3.90
[.154]
6.60
[.260]
2.20
[.087]
12.47
[.491]
6.60
[.260]
3.90
[.154]
[.394]
14.50
[.571]
Printed Circuit Layout
25
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Vertical Pin Headers for
Cable Assemblies
1
2
Pair
Count
Part
Number
4
1469105-11
4
1469124-11
2
1469106-11
2
1469125-11
Application Tooling2
Repair
Pin
Housing
Removal
Removal
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
Signals
2.50
.098
1.80
.071
2.50
.098
1.80
.071
5.30
.209
5.30
.209
5.30
.209
5.30
.209
10
80
40
91373-1
1583237-1
1725635-1
1583255-1
80
40
91373-1
1583237-1
1725635-1
1583255-1
40
20
91372-1
1583237-1
1804170-1
1583255-1
10
25.00
.984
25.00
.984
25.00
.984
25.00
.984
40
20
91372-1
1583237-1
1804170-1
1583255-1
Grounds
Insertion
Pin
Header
10
10
Grounds
Insertion
Pin
Header
Pin
Insertion
With latch for cable assemblies.
See page 43 for Instruction Sheet Number.
For PCB Layout, see pages 11-13.
Right Angle Pin Headers
for Cable Assemblies
1
2
Application Tooling2
Repair
Housing
Removal
Pair
Count
Part
Number
Tail
Length
Mating
Pin
Length
Column
Count
Module
Length
Signals
4
1469668-1
25.00
.984
25.00
.984
80
40
1804244-1
1804239-1
1804177-1
1469354-11
5.30
.209
5.30
.209
10
2
2.20
.087
2.20
.087
40
20
1804178-1
1804172-1
1804175-1
10
Chiclet
Removal
With latch for cable assemblies.
See page 43 for Instruction Sheet Number.
For PCB Layout, see pages 14-16.
26
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
4 Pair 5 Column and
4 Pair 10 Column
Push-to-Release Cable
Assemblies
1
Z-PACK HM-Zd Connector
Note: Design shown for
reference only. Contact
Tyco Electronics for other
variations and configurations.
2 Pair 5 Column and
2 Pair 10 Column
Push-to-Release Cable
Assemblies
Note: Design shown for
reference only. Contact
Tyco Electronics for other
variations and configurations.
4 Pair
Cable Assemblies for
Backplane Testing
Note: Design shown for
reference only. Contact
Tyco Electronics for other
variations and configurations.
27
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
4 Pair
2.70
[.106]
2.13
[.084]
Top Surface of
Daughtercard
See Detail Z
Row B
Z-PACK HM-Zd Backplane and
Z-PACK 2mm HM Connectors
0.10 Min.
Typ.
[.004] Gap
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
2.13
[.084]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Row B
Reference Spec.
4 Spaces @ 114-19029 for
2.00 [.079] Hole Dimensions
125 Plcs.
= 8.00 [.315]
Detail Z
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
Ø 0.010
Typ.
[.0004]
11 Spaces @
1.50 [.059] = 16.50 [.650]
3 Pair
2.70
[.106]
1.80
[.071]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
7 Spaces @
114-19029 for
2.00 [.079]
Hole Dimensions
= 14.00 [.551]
200 Plcs.
Top Surface of
Daughtercard
See Detail Z
Row B
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
1.80
[.071]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Row B
Reference Spec.
4 Spaces @ 114-19029 for
2.00 [.079] Hole Dimensions
125 Plcs.
= 8.00 [.315]
2 Pair
Ø 0.010
Typ.
[.0004]
8 Spaces @
1.50 [.059] = 12.00 [.472]
2.70
[.106]
1.80
[.071]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
7 Spaces @
114-19029 for
2.00 [.079]
Hole Dimensions
= 14.00 [.551]
200 Plcs.
Top Surface of
Daughtercard
See Detail Z
Row B
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
1.80
[.071]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Row B
Reference Spec.
4 Spaces @ 114-19029 for
2.00 [.079] Hole Dimensions
125 Plcs.
= 8.00 [.315]
Ø 0.010
Typ.
[.0004]
5 Spaces @
1.50 [.059] = 7.50 [.295]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
7 Spaces @
114-19029 for
2.00 [.079]
Hole Dimensions
= 14.00 [.551]
200 Plcs.
28
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
4 Pair
1
(Continued)
Z-PACK HM-Zd Connector
Row B
Z-PACK HM-Zd Daughtercard
and Z-PACK 2mm HM
Connectors
2.13
[.084]
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Ø 0.010
[.0004]
4 Spaces @
2.00 [.079]
= 8.00 [.315]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
2.70
[.106]
Reference Spec.
114-19029 for
Hole Dimensions
125 Plcs.
11 Spaces @
1.50 [.059] =
16.50 [.650]
PC Board Edge
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
Top Surface of
Daughtercard
24 Spaces @
2.00 [.079] = 48.00 [1.890]
2.13
[.084]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
114-19029 for
Hole Dimensions
200 Plcs.
1.50
[.059]
7 Spaces @
2.00 [.079]
= 14.00 [.551]
3 Pair
Row B
1.80
[.071]
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Ø 0.010
[.0004]
4 Spaces @
2.00 [.079]
= 8.00 [.315]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
2.70
[.106]
Reference Spec.
114-19029 for
Hole Dimensions
125 Plcs.
8 Spaces @
1.50 [.059] =
12.00 [.472]
PC Board Edge
Top Surface of
Daughtercard
24 Spaces @
2.00 [.079] = 48.00 [1.890]
1.80
[.071]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
114-19029 for
Hole Dimensions
200 Plcs.
1.50
[.059]
7 Spaces @
2.00 [.079]
= 14.00 [.551]
2 Pair
Row B
1.80
[.071]
2.70
[.106]
24 Spaces @
2.00 [.079] = 48.00 [1.890]
Ø 0.010
[.0004]
4 Spaces @
2.00 [.079]
= 8.00 [.315]
9 Spaces @
2.50 [.098]
= 22.50 [.886]
2.70
[.106]
Reference Spec.
114-19029 for
Hole Dimensions
125 Plcs.
5 Spaces @
1.50 [.059] =
7.50 [.295]
PC Board Edge
Top Surface of
Daughtercard
24 Spaces @
2.00 [.079] = 48.00 [1.890]
1.80
[.071]
Reference Spec.
114-13059 for
Hole Dimensions
60 Plcs.
Reference Spec.
114-19029 for
Hole Dimensions
200 Plcs.
1.50
[.059]
7 Spaces @
2.00 [.079]
= 14.00 [.551]
29
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
A
Ref.
CL of Signal Cavities
B
Ref.
CL of Signal Cavities
Z-PACK HM-Zd Backplane
Connector with Unkeyed
Guide Pins
Top Surface of
Daughtercard
Row B
5.50
Ref.
[.217]
Top Surface of
Daughtercard
Row B
5.50
Ref.
[.217]
CL of Guide Pin
Top Surface of
Daughtercard
Row B
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
5.50
Ref.
[.217]
CL of Guide Pin
E Typ.
Ref.
1 Typ. Ref.
Annular Ring
PEM Nut Part Number KSF-M4
C
Ref.
D
Ref.
8.74 Ref.
[.344]
A
5.25
.207
5.52
.217
B
6.15
.242
6.42
.253
Dimension
C
0.40
.016
0.65
.026
D
1.30
.051
1.55
.061
E
0.60
.024
0.42
.017
Part
Number
223956*
223985
* RoHS Compliant.
30
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
1
(Continued)
Z-PACK HM-Zd Connector
Z-PACK HM-Zd Daughtercard
Connector With Unkeyed
Female Guide Modules
20.75
Ref.
[.817]
5.75
Ref.
[.226]
11.00
Ref.
[.433]
A
Ref.
B
Ref.
Typ.
C
Ref.
CL of Guide Module
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
5.50
Ref.
[.217]
Top Surface of
Daughtercard
Row B
CL of Signal Cavities
CL of Signal Cavities
CL of Guide Module
5.50
Ref.
[.217]
Top Surface of
Daughtercard
Row B
CL of Guide Module
5.50
Ref.
[.217]
Top Surface of
Daughtercard
Row B
Dimension
A
B
C
5.25 6.15 0.56
.207 .242 .022
5.52 6.42 0.83
.217 .253 .033
Part
Number
223957
223986
31
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
1.55 Ref.
[.061] Typ.
Top Surface of
Daughtercard
Z-PACK HM-Zd Backplane
Connector and Universal
Power Modules
Row B
Top Surface of
Daughtercard
Row B
Top Surface of
Daughtercard
Row B
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
2.50
Ref.
[.098]
3.30
Ref.
[.130]
1.00
[.039]
Ref.
5.70
Ref.
[.224]
Reference Spec.
114-13059 for
Hole Dimensions
for HM-Zd
1.50
Ref.
[.059]
3.00
Ref.
[.118]
Top Surface of
Daughtercard
Reference Spec.
114-1103 for
Hole Dimensions
for Power Module
Connector Outline
Recommended PC Board Layout
Component Side
32
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
1
(Continued)
Z-PACK HM-Zd Connector
Z-PACK HM-Zd Daughtercard
Connector and Universal
Power Modules
12.20
Ref.
[.480]
0.325 Ref.
[.013] Typ.
See Recommended
PC Board Layout
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
Top Surface of
Daughtercard
Row B
Top Surface of
Daughtercard
Row B
Top Surface of
Daughtercard
Row B
Reference Spec.
114-1103 for
Hole Dimensions
for Power Module
4.05
Ref.
[.159]
Reference Spec.
114-13059 for
Hole Dimensions
for HM-Zd
2.00
Ref.
[.079]
Leading Edge of
Daughtercard
1.50
Ref.
[.059]
4.95
Ref.
[.195]
1.50
Ref.
[.059]
Recommended PC Board Layout
Component Side
33
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
6.42
Ref.
[.253]
Z-PACK HM-Zd Backplane
Connector and MULTIGIG RT
Connector Guide Modules
CL of Signal Cavities
7.32
Ref.
[.288]
CL of Signal Cavities
Top Surface of
Daughtercard
Row B
6.00
Ref.
[.236]
CL of Guide Pin
Top Surface of
Daughtercard
Row B
6.00
Ref.
[.236]
CL of Guide Pin
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
Top Surface of
Daughtercard
Row B
6.00
Ref.
[.236]
CL of Guide Pin
10.00
Ref.
[.394]
0.67 Typ.
[.026] Ref.
34
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
1
(Continued)
Z-PACK HM-Zd Connector
Z-PACK HM-Zd Daughtercard
Connector and MULTIGIG RT
Connector Guide Modules
5.00
Ref.
[.197]
17.25
Ref.
[.679]
10.75
Ref.
[.423]
6.42
Ref.
[.253]
0.32 Ref.
[.013] Typ.
7.32
Ref.
[.288]
Note:
1. Dimensions shown represent
minimum stacking dimensions
allowable. Customer specific
applications will dictate actual
module spacing.
CL of Guide Module
Row B
CL of Signal Cavities
CL of Signal Cavities
6.00
Ref.
[.236]
Top Surface of
Daughtercard
CL of Guide Module
Row B
6.00
Ref.
[.236]
Top Surface of
Daughtercard
CL of Guide Module
Row B
6.00
Ref.
[.236]
Top Surface of
Daughtercard
35
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
Top Surface of Daughtercard
and Centerline of Row B,
For Both Connector Pairs,
Are Coplanar. See Note 2.
CL
Z-PACK HM-Zd Connector
Recommended Mid-Plane
Layout Option #1
0.90
Ref.
[.035]
Pin Identification:
Row A / Column 1
See Note 2.
Backplane
Thickness
Notes:
1. Minimum recommended backplane thicknesses calculated
using maximum and minimum
tolerances. No statistical methods
were used.
2. Refer to the customer print for
complete column and row designations.
Tail Length
Typ.
Pin Identification:
Row A / Column 10
See Note 2.
CL
Tail
Length
1.80
.071
2.50
.098
Min. Recommended
Backplane Thickness
4.00
.157
5.40
.213
36
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
1
12.00
Ref.
[.472]
Z-PACK HM-Zd Connector
Z-PACK HM-Zd Connector
Recommended Mid-Plane
Layout Option #2
Pin Identification:
Row A / Column 1
See Note 2.
Tail Length Typ.
Backplane
Thickness
Notes:
1. Minimum recommended backplane thicknesses calculated
using maximum and minimum
tolerances. No statistical methods
were used.
2. Refer to the customer print for
complete column and row designations.
3. An additional row of holes
must be drilled to accommodate this midplane application.
See Note 3.
Pin Identification:
Row H / Column 1
See Note 2.
CL is coplanar
Tail
Length
1.80
.071
2.50
.098
Min. Recommended
Backplane Thickness
4.00
.157
5.40
.213
37
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Recommended Printed
Circuit Board Layouts
(Continued)
Z-PACK HM-Zd Connector
Coplanar
HM-Zd Right Angle Header
4 Pair
HM-Zd Right Angle Receptacle
4 Pair
17.80
Min.
[.701]
For Coplanar Applications
Centerlines of Holes on
Receptacle PCB To Be Aligned
To Holes in Header PCB
38
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Z-PACK HM-Zd Connector
Footprint and PC Board
Trace Routing
Accounts for system design
requirements
■
Footprint is optimized for
low noise and ease of
routing
■
Footprint permits wide
traces for long runs and
without having to separate
differential pairs
■
Footprint supports quad
routing techniques
(see below)
1
Z-PACK HM-Zd Connector
■
Notes Regarding Quad
Routing:
Benefits of Quad Routing
■
■
Better Platform
Characteristics
■ Performance variation
due to layer connection
is reduced
■ Crosstalk is reduced
■ Return loss is reduced
Enables a lower cost
solution
■ Cost of better materials
is offset by reduced
processing
■ Increased manufacturability—less layers and
decreased aspect ratios
■ Decreased number of
layers reduces the need
for counterboring of
PC boards
1. Within pin field, center
signal pairs between
signal columns
Standard
4 Layers
2. Trace separation is
increased over “standard”
recommendations to
further limit trace to trace
crosstalk
QuadRoute
2 Layers
3. Recommend Quad
Routing pairs together
that are propagating in
the same direction
4.75
[.187]
5.25
[.207]
4.75
[.187]
13.25
[.522]
4.75
[.187]
5.25
[.207]
4.75
[.187]
Notes Regarding Antipad
Design:
2.92
[.115]
1. An oval shaped antipad
may be used to increase
PC board manufacturability and to improve
trace break-out
1.22
[.048]
2. Antipad length shown is
2.92 [.114]. An antipad
length up to 3.48 [.137]
may be used.
1.50
[.059]
For further details request Report # 20GC015-1 or visit
http://catalog.tycoelectronics.com/TE/GeneralInfo/footprint_optimization.pdf
39
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Connector Housing
Gathering Capabilities
1.48
Offset
[.058]
1.65
Offset
[.065]
CL of Receptacle
CL of Receptacle
24.55
Ref.
[.967]
Note: Dimensions are at nominal
conditions. The offsets are to be
applied to either side of the header
center line.
CL of Header
25.20
Ref.
[.992]
CL of Header
40
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Z-PACK HM-Zd Connector
Mating Sequence Chart
1
Product
Family
Dim. C
Dim. A
Fully
Mated
HM-Zd
1.50
.059
12.50
.492
HM-Zd
Guide
Hardware
3.00
.118
12.50
.492
HM-2mm
1.50
.059
12.50
.492
MULTIGIG RT
T1
2.50
.098
12.50
.492
MULTIGIG RT
T2
2.25
.089
12.50
.492
MULTIGIG RT
T3
2.25
.089
12.50
.492
MULTIGIG RT
Power
Module
5.50
.217
12.50
.492
MULTIGIG RT
Guide
Hardware
N/A
12.50
.492
HS-3
1.50
.059
12.50
.492
UPM
3.50
.138
12.50
.492
UPM
Guide
Hardware
5.75
.226
12.50
.492
MULTI-BEAM XL
Right Angle
Header to
Vertical
Receptacle
MULTI-BEAM XL
Right Angle
Receptacle
to Vertical
Header
5.08
.200
3.81
.150
14.73
.580
13.21
.520
Z-PACK HM-Zd Connector
Fully Mated
Reliable Mate
Contact
Ground Shield
Signal Level 2
Signal Level 1
24.0 mm Pin
22.2 mm Pin
Key Blocking Point
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 3
Signal Level 2
Signal Level 1
Ground
Signal Level 1
Power Level 3
Power Level 2
Power Level 1
Dim B.
Reliable
First Mate
Mate
Last Break
16.78 [.661]
17.55 [.691]
15.41 [.607]
15.85 [.624]
13.91 [.548]
14.35 [.565]
27.50 [1.083]
33.40 [1.315]
25.70 [1.012]
31.60 [1.244]
N/A
22.03 [.867]
18.27 [.719]
18.84 [.742]
16.77 [.660]
17.34 [.683]
15.27 [.601]
15.84 [.624]
18.00 [.709]
—
18.00 [.709]
—
16.50 [.650]
—
15.00 [.591]
—
18.00 [.709]
—
18.00 [.709]
—
16.50 [.650]
—
15.00 [.591]
—
16.50 [.650]
—
15.00 [.591]
—
23.75 [.935]
—
22.25 [.876]
—
20.75 [.817]
—
Fully Mated
Wipe Length
4.28 [.169]
2.91 [.115]
1.41 [.056]
N/A
N/A
N/A
5.77 [.227]
4.27 [.168]
2.77 [.109]
5.50 [.217]
5.50 [.217]
4.00 [.157]
2.50 [.098]
5.50 [.217]
5.50 [.217]
4.00 [.157]
2.50 [.098]
4.00 [.157]
2.50 [.098]
11.25 [.443]
9.75 [.384]
8.25 [.325]
Guide Pin Key
33.25 [1.309]
N/A
20.75 [.817]
Guide ESD Contact
30.75 [1.211]
—
18.25 [.719]
Ground
Signal Level 2
Signal Level 1
Power Level 3
Power Level 2
Power Level 1
Guide Pin Key
Keyed Guide Pin
Keyed Guide Pin
PreMate Power —
Level 1
PostMate Power —
Level 2
PreMate Signal —
Level 2
PostMate Signal —
Level 3
PreMate Power —
Level 1
PostMate Power —
Level 2
PreMate Signal —
Level 2
PostMate Signal —
Level 3
17.08 [.672]
16.05 [.632]
14.55 [.573]
20.25 [.797]
18.65 [.734]
17.03 [.670]
31.39 [1.236]
31.39 [1.236]
35.23 [1.387]
17.60 [.693]
16.47 [.648]
14.97 [.589]
20.95 [.825]
19.35 [.762]
17.73 [.698]
36.16 [1.424]
36.16 [1.424]
40.00 [1.575]
—
16.84 [.663]
—
17.81 [.701]
—
18.26 [.719]
—
19.53 [.769]
—
15.32 [.603]
—
16.28 [.641]
—
16.74 [.659]
—
18.01 [.709]
4.78 [.188]
3.75 [.148]
2.25 [.089]
8.10 [.319]
6.50 [.256]
4.88 [.192]
N/A
N/A
N/A
5.61 [.221]
Min.
4.34 [.171]
Min.
3.81 [.150]
Min.
2.54 [.100]
Min.
5.61 [.221]
Min.
4.34 [.171]
Min.
3.81 [.150]
Min.
2.54 [.100]
Min.
41
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Z-PACK HM-Zd Connector
Application Tooling and
Equipment
1585280-1 Model AP3
Typical PC Board Support
(Customer Supplied)
1585696-1 Model BMEP 5T
Typical Receptacle Seating Tool
IS 408-8500
1585699-1 Model MEP 6T
Typical Pin Header Seating Tool
IS 408-8501
Typical Manual Arbor
Frame Assembly
(Commercially Available)
Typical Chiclet Removal Tool
IS 408-8647
Typical Receptacle Housing
Removal Tool
IS 408-8644
Typical Pin (Post)
Extraction Tool
IS 408-8646
Note: Typical power units from
Tyco Electronics Automation Group
include, but are not limited to those
shown on this page.
Typical Pin (Post)
Insertion Tool
IS 408-8648
Typical Header
Removal Tools
IS 408-8645
42
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Z-PACK HM-Zd Connector
Application Tooling and
Equipment (Continued)
Type
Board to
Board
Repair
Tooling
Cable to
Board
Insertion
Tooling
Cable to
Board
Repair
Tooling
Instruction Sheet
408-8500
408-8500
408-8500
408-8500
408-8500
408-8500
408-8500
408-8501
408-8501
408-8501
408-8501
408-8501
408-8501
408-8501
408-8810
408-8810
Note 1
Note 1
408-8644
408-8644
408-8644
408-8644
408-8645
408-8645
408-8645
408-8646
408-8647
408-8867
408-8647
408-8648
Note 1
Note 1
Note 1
Note 1
Note 1
Note 1
408-8785
408-8785
Note 1
408-8785
408-8645
Note 1
Note 1
Note 1
Note 1
Note 1
Part Number
91347-1
91347-2
91347-3
91347-4
91376-1
91350-1
91350-2
91349-1
91349-2
91349-3
91349-4
91375-1
91348-1
91348-4
91378-1
91378-3
1804179-1
91377-1
1583224-1
1583224-2
1583224-3
1583224-4
1583220-1
1725634-1
1583234-1
1583237-1
1583248-1
1673952-1
1583249-1
1583255-1
1804174-1
1804173-1
1804171-1
1804177-1
1804176-1
1804175-1
91373-1
91372-1
1804244-1
1804178-1
1725635-1
1804170-1
1804239-1
1804172-1
1804177-1
1804175-1
1
Z-PACK HM-Zd Connector
Board to
Board
Insertion
Tooling
Description
Seating Tool, Receptacle, 4 Pair, 10 Column
Seating Tool, Receptacle, 4 Pair, 15 Column
Seating Tool, Receptacle, 4 Pair, 12 Column
Seating Tool, Receptacle, 4 Pair, 20 Column
Seating Tool, Receptacle, 3 Pair
Seating Tool, Receptacle, 2 Pair, 10 Column
Seating Tool, Receptacle, 2 Pair, 20 Column
Seating Tool, Header, 4 Pair, 10 Column
Seating Tool, Header, 4 Pair, 15 Column
Seating Tool, Header, 4 Pair, 12 Column
Seating Tool, Header, 4 Pair, 20 Column
Seating Tool, Header, 3 Pair
Seating Tool, Header, 2 Pair, 10 Column
Seating Tool, Header, 2 Pair, 20 Column
Seating Tool, Right Angle Header, 4 Pair, 10 Column
Seating Tool, Right Angle Header, 4 Pair, 12 Column
Seating Tool, Right Angle Header, 3 Pair
Seating Tool, Right Angle Header, 2 Pair
Receptacle Housing Removal Tool, 4, 3, 2 Pair, 10 Column
Receptacle Housing Removal Tool, 4, 3, 2 Pair, 12 Column
Receptacle Housing Removal Tool, 4, 3, 2 Pair, 15 Column
Receptacle Housing Removal Tool, 4, 3, 2 Pair, 20 Column
Housing Removal Tool, Vertical Header, 4 Pair
Housing Removal Tool, Vertical Pin Header, 3 Pair
Housing Removal Tool, Vertical Header, 2 Pair
Extraction Tool, Individual Pin, Header, 4, 3, 2 Pair
Chiclet Removal Tool, Receptacle, 4 Pair
Chiclet Removal Tool, Receptacle, 3 Pair
Chiclet Removal Tool, Receptacle, 2 Pair
Insertion Tool, Individual Pin, Header, 4, 3, 2 Pair
Housing Removal Tool, Right Angle Header, 4 Pair
Housing Removal Tool, Right Angle Header, 3 Pair
Housing Removal Tool, Right Angle Header, 2 Pair
Chiclet Removal Tool, Right Angle Header, 4 Pair
Chiclet Removal Tool, Right Angle Header, 3 Pair
Chiclet Removal Tool, Right Angle Header, 2 Pair
Seating Tool, Vertical Cable Header, 4 Pair
Seating Tool, Vertical Cable Header, 2 Pair
Seating Tool, Right Angle Cable Header, 4 Pair
Seating Tool, Right Angle Cable Header, 2 Pair
Housing Removal Tool, Vertical Header, 4 Pair
Housing Removal Tool, Vertical Header, 2 Pair
Housing Removal Tool, Right Angle Header, 4 Pair
Housing Removal Tool, Right Angle Header, 2 Pair
Chiclet Removal Tool, Right Angle Header, 4 Pair
Chiclet Removal Tool, Right Angle Header, 2 Pair
Note: 1. Contact Tyco Electronics for Instruction Sheet.
43
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
High Speed Backplane Connectors
Z-PACK HM-Zd Connector (Continued)
Compatible 2mm HM
Products
Receptacles with Upper and
Lower Ground Return Shields
Mates with 5+2 and 8+2 row male product
to improve signal integrity
■ Three levels of performance
a) reduced cross talk
b) ground return shields
c) reduced cross talk and ground return
shields
■
Z-PACK 2mm HM Type A & B
Connector Modules
Offered with five rows of signal contacts and
two rows of ground contacts
■ Type A offers center guiding and keying
facility and 110 signal contacts
■ Type B has 125 signal contacts
■ Upper ground return shields are pre-fitted
to receptacles and used with the 5+2 row
male connectors
■ Up to three levels of sequenced pins
available on vertical pin headers
■ Both types are end stackable without
change in contact pitch
■
Z-PACK 2mm HM Connector
Coding Keys
Used in Type A, D, L and M male and
female connectors
■ Polarized features and used in the multipurpose center of the male and female
housings
■ Keys are inserted in the mating faces of the
housings
■ Available in up to 70 different options
■
Z-PACK 2mm HM Type D & E
Connector Modules
Offered with 8 rows of signal contacts and
two rows of ground contacts
■ Type D offers center guiding and keying
facility and 176 signal contacts
■ Type E has 200 signal contacts
■ Upper ground return shields are pre-fitted
to receptacles and used with 8+2 row male
connectors
■ Up to three levels of sequenced pins
available on vertical pin headers
■ Both types are end stackable without
change in contact pitch
■
Shrouds
■
■
Z-PACK 2mm HM Type F & C
Connector Modules
Offered in type A, B, A/B, C, D, E, D/E, and F
Product is offered in various standoff
heights to accommodate a wide variety of
pcb thicknesses
Right Angle Male Offering
5 row connector offering Type A, B & C
style product mate with respective right
angle product for card extender applications
■ Type A has 110 signal contacts and center
guidance and keying facility
■ Type B offered in 25, 22 & 19 column
offerings
■ Type C has 55 signal contacts and guidance
features
■ Available in standard and reduced cross talk
varieties
■
Half size modules which are intended for
use at the end of a column
■ Type C has 55 signal pins and guidance
features
■ Type F has 88 signal pins and guidance
features
■ Upper ground return shields are pre fitted to
receptacles and used with 5+2 and 8+2 row
connectors
■ Three levels of sequenced pins available on
vertical pin headers
■ Both types are end stackable without
change in contact pitch
■
Universal Power Module
Type AB/ DE Modules
Offered in 3 to 12 position sizes
Inverse sex configuration offers a vertical
receptacle for backplane applications
■ Polarized vertical press fit leads
■ Up to 15 amperes per contact with a
durability rating of 250 mating cycles
■
Offers maximum signal density and
alignment features of standard Type A & D
modules
■ Type AB offers 125 signal contacts and
guiding and keying features
■ Type DE offers 200 signal contacts and
guiding and keying features
■ Offers all the advantages of sequenced pins,
pre-shielded receptacles and end stackable
■
■
Type L M & N Connectors
Vertical Receptacles
DIN contacts can be fitted to types L, M and
N style housings either in power or coax
options
■ 5 row and 5+2 row connector options
■ Type L accommodates up to 6 DIN contacts
■ Type M connectors are loaded with 55
signal contacts in row A to E and 3 cavities
for DIN style contacts
■ Type N accommodates up to 3 DIN contacts
■
5 & 8 row product offering
Used with either vertical or right angle
males in application
■ Type A & D offers center keying and
guidance
■ Type B & E offers 25 columns of signal
contacts
■ Type C & F is a half size module with
guidance features
■
■
44
Catalog 1773095
Issued 4-05
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are U.S. equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
工商网监
湘ICP备2023018690号
