1473571-3

REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS The e-CON standard was developed in Japan in 2001 by a group Key Benefits of Japanese manufacturers in order to standardize connections • Termination by generic tools from sensors to terminals. This standard is not under control of any standard organizations. Without the standard, each manufacturer had specified different connectors for terminations of sensors to Programmable Logic Controllers (PLCs), and end users had to prepare • Small 2.0 mm [.079] centerline connectors • Two contact points structure many different connectors and different tools. In order to improve this provides for high contact situation and create a user-friendly environment, TE Connectivity has reliability offered AMP RITS connectors as the standard interface connector for sensors. The 4-position RITS connector is approved as the industry standard connector. • Housing colors indicate applicable wire range • Component Recognized by UL to US and Canadian Standards, File No. E28476 Electrical Product Specifications • Current rating: Max. 3 A • Product specification: • Voltage rating: 32 V DC • Instruction sheets: 411-78014 411-78162 Mechanical • Applicable wire range: 0.1 to 0.5 mm2 [27 to 20 AWG] • Outside Diameter: 0.6 to 1.6 mm [.02 – .06] Materials • Housing: PBT (UL 94V-0)/Polycarbonate (UL 94V-0)/ • Contact: Phosphor Bronze Platings 0.2 ųm [.000007] gold plated underplated 1.27 ųm [.000050] Ni • LCP (SMT Products) INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS 108-5765 RITS INTERCONNECTION SYSTEM CONNECTORS Locking Configuration The new locking lever design secures a wire-towire connection and can be pulled through a partially jammed wiring duct. When mated, a very clear click-sound will be heard. It will help prevent accidental half-mating. Chisel Press Contact This new technology has three major features: Chisel, Press and Retention. The chisel shaped contact pierces into wire to secure a much larger contact area. The press function will keep the contact pressure applied. The retention mechanism retains the wire at a higher retention force than Insulation Displacement Contact (IDC) connectors. Chisel Press Contact is the new wire termination technology to be applied to many kinds of wire from solid to multi-stranded commonly used in Factory Cost Reduction Automation (FA) industries. RITS Connectors offer 80% cost 1 reduction of operation compared to 2 conventional crimping connectors. 3 3 2 Chisel Part Press Part Cable Retention Part 1 Wire termination cross section INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS RITS INTERCONNECTION SYSTEM CONNECTORS Easy Termination STEP 1 Insert each wire into Housing. Easier terminations made with lower applied cost and Pliers can only be used for 3- and 4-position RITS connectors. improved quality. In the manufacturing process of FA equipment, electrical connections by crimping are commonly seen in the assembly lines. RITS (Remote I/O Terminal System) connectors offer an easy and efficient STEP 2 Squeeze housing together with pliers or press the housing together with a special tool. connection method as well as total cost reduction with higher electrical reliability without special skill to Please use the special tool for larger than 5-position RITS connectors. perform the work. Part Number: 1729940-1 Instruction Sheet: 411-78162 Please refer to Instruction Sheet 411-78014 for further detail. The way to connect wire is quite easy: Insert wire into a housing and pinch the housing with a generic tool such as pliers. TE Connectivity also provides a special tool for RITS termination at a more economical price than a crimp-type tool due to its simple function. Product Features JCT Box HDR Connectors (2D) (4D) Socket Connectors PRODUCTS PLUG Connectors FEATURES • PLUG Connectors for wire termination • Consists of HOLD HSG and BODY HSG • HSG colors indicate applicable wire range • Connectors for PCB • For Junction Box. • Stackable mounting is possible • Plugs can be mated on both sides • Single row and 4row types available • Panel type version also available • Right Angle type available with SMT Type • Prevent from missdirection-inserting INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS • Basic same feature as 2D type • Socket connectors for wire termination • Four circuits are made common respectively. • Plug can be mated. • Hold housing color same as Plug connectors RITS INTERCONNECTION SYSTEM CONNECTORS Various Product Line-up RITS connectors are available for wire-to-wire type and PCB mount type from 3- through 8-positions. PLUG Connectors Wire RangeŁ O/S Diameter mm 0.9-1.0 1.0-1.15 1.15-1.35 Vertical 1.35-1.6 Socket Connector Junction Box Horizontal 2D 0.9-1.0 1.0-1.15 1.15-1.35 1.35-1.6 Red Yellow Blue Green 4D Orange Red Yellow Blue Green single row 3P ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 4P* ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ 5P ★ ★ ★ ★ ★ ★ — — — — — — — — 6P ★ ★ ★ ★ ★ ★ — — ★ — ★ ★ ★ ★ 7P ★ ★ ★ ★ ★ ★ — — — — — — — — 8P ★ ★ ★ ★ ★ ★ — — ★ — ★ ★ ★ ★ HSG Color (POS) 0.6-0.9 Header PCB Mount 4 row single row ★ Available — No Plan * e-CON Conform Applied cable Applicable cable is designated by its outside diameter. Please choose the appropriate connector from the outside diameter of cable to be used with. 0.1-0.5 mm2 [27-20 AWG] Wire Range (mm2*) Outside Diameter 0.6 - 0.9 [.024 - .035] 0.9 - 1.0 [.035 - .039] 1.0 - 1.15 [.039 - .045] 1.15 - 1.35 [.045 - .053] 1.35 - 1.60 [.053 - .063] 3-1473562-X 1-1473562-X 1473562-X 2-1473562-X 4-1473562-X 1-1746741-X 1746741-X 2-1746741-X 4-1746741-X Plug HSG Color Part Number Socket HSG Color Part Number Insulator Material PVC/PE How to choose the appropriate connector Please find the wire diameter in the above table and locate the appropriate connector part number. All wire needs to be tested for termination with the connector. Further detailed information is available from Technical Support. *When 0.08 mm2 [29 AWG] wire is to be used, please contact Technical Support. Note: All part numbers are RoHS Compliant. INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS RITS INTERCONNECTION SYSTEM CONNECTORS Plug Connectors *The 5-position and the 7-position assemblies do not have contacts at the circuit number 6 and 8, respectively. Note: All part numbers are RoHS Compliant. Socket Connectors Note: All part numbers are RoHS Compliant. INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS RITS INTERCONNECTION SYSTEM CONNECTORS Board Mount Headers 1-Row Vertical Type *The 5-position and the 7-position assemblies do not have contacts at the circuit number 6 and 8, respectively. Note: All part numbers are RoHS Compliant. Board Mount Headers 4-Row Vertical Type Drawing shows 4-position. As to the 3-position, please confirm with the 3-position drawing. Note: All part numbers are RoHS Compliant. INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS RITS INTERCONNECTION SYSTEM CONNECTORS Board Mount Headers SMT Horizontal Type Drawing and PC board layout shows Positioning Boss Holes. Dimensions are for reference only. Packaged on embossed tapes suitable for automated application. Note: All part numbers are RoHS Compliant. INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS RITS INTERCONNECTION SYSTEM CONNECTORS Junction Box (2D Type) Note: All part numbers are RoHS Compliant. Junction Box (4D Type) Note: All part numbers are RoHS Compliant. Note: The Junction Box with 4 connector interfaces enables 3 outputs by 1 input. 4 interfaces are commoned as per the drawing. INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS © 2016 TE Connectivity Ltd. Family of Companies. All Rights Reserved. TE, TE Connectivity, and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. 1654885 JN 1/16 INDUSTRIAL /// RITS INTERCONNECTION SYSTEM CONNECTORS USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 The Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015