148354-1

RF Coax Connectors DIN Inserts Product Facts ■ Meets requirements of DIN 41626 and CECC 22330 ■ Suitable for DIN 41612 Type M Connectors (Eurocard), Siedecon, and Z-PACK 2mm HM Connectors ■ Meets DIN Performance Level II ■ Crimp termination for inner and outer conductors (cable mount only) eliminates the need for solder ■ Right-angle and vertical style board mount pin and socket contacts ■ Board mount product available with both solder and compliant tails ■ Straight cable mount pin and socket contacts for RG 316, and RG 179 cable ■ Contact impedance of 50 and 75 ohms for cable mount and 50 ohms for board mount Coaxial inserts according to CECC 22 330 and highcurrent inserts (CECC specification under preparation) can be used in conjunction with a DIN 41612 style M contact base (CECC 75 101-801), SIEDECON, and Z-PACK 2mm HM connectors. Coaxial inserts have a contact system based on the pin-socket principle with the same dimensions as the Series 1.0/2.3 coaxial connectors and are plug-compatible. The product family is represented by various 50Ω and 75Ω styles that can be used far into the GHz range. The high mounting density (pitch between adjacent contacts starting at 7.5 mm) and installation into the contact base, by means of a “snap-in” lock, make the inserts particularly well suited for applications. Due to the centering, – coaxial plugs are installed in contact bases with audio-frequency (AF) female contacts – coaxial jacks are installed in contact bases with AF male contacts. The high-quality materials used with coaxial inserts ensure a high grade of service even in an industrial atmosphere. Technical Data Electrical and mechanical characteristics of coaxial inserts in accordance with DIN 41626 Part 2 and CECC 22 330 Characteristic Impedance — 50/75 Ω Frequency Range — up to 2 GHz Reflection Factor Up To 2 GHz 1 — ≤ 0.10 Insulation Resistance — Initial value — ≥ 1 GΩ After stressing — ≥ 200 MΩ Screening Effectiveness — ≥ 70 dB Inner Conductor Contact Resistance After Stressing — ≤ 10 mΩ Outer Conductor Continuity After Stressing — ≤ 7.5 mΩ Voltage Proof 2 — Flexible Cables (RG 316) At sea level — 750 V, 50 Hz At 20 km altitude — 150 V, 50 Hz Working Voltage 2 — Flexible Cables (RG 316) At sea level — 350 V, 50 Hz At 20 km altitude — 65 V, 50 Hz Service Life — 500 cycles Climatic Category — 55/125/56 Notes 1 Guideline dimensions, depending on cable type and connector style. 2 Some cable types suitable for use with these connectors have lower characteristic values than specified here. 238 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts, 50 Ohm Z-PACK 2mm HM Connectors Vertical PC Board Mount, Compliant 4.15 –0.012 [.163 –.0004] 4.75 –0.03 [.187 –.001] 1.15 +0.30 [.045 +.012] 12.21 [.480] Ref. 5.50 [.216] Min. 90°0' Typ. 5.10 Max. [.200] Sq. 1.00 ±0.05 Typ. [.039 ±.002] 45°0' Typ. 5.08 ±0.05 [.200 ±.002] Recommended PC Board Layout Right-Angle PC Board Mount, Compliant 17.75 Ref. [.700] 5.35 –0.30 [.216 –.012] 7.00 ±0.10 [.275 ±.004] 6.10 Max. [.240] Sq. 90°0' Typ. 45°0' Typ.
0.03 4.75  0.09 .001 .187
 .004 4.20 +0.075 [.165 +.003] 4.00 [.157 Type Vertical PCB Socket, Compliant Rt. Angle PCB Pin, Compliant Coaxial Inserts to SMA Adapters ±0.10 ±.004] 1.00 ±0.05 Typ. [.039 ±.002] 5.08 ±0.05 [.200 ±.002] Recommended PC Board Layout Housing Type Z-PACK 2mm HM Male Z-PACK 2mm HM Female Application Tooling Part No. 904800-1 5148385-1 904805-1 904804-1 Support Anvil 5148386-1 Coaxial Insert Plug to SMA Jack 7.92 ± 0.12 [.312 ± .005] Hex. 19.1 [.755] Max. Part No. 1274192-1 Coaxial Insert Socket to SMA Jack 7.92 Hex. [.312] Part No. 1274191-1 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 239 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts (50 Ω/75 Ω) Bulkhead Cable Jack for male connectors Ø 5.8 [.228] 4.05 [.159] 9.6 [.378] Ø Max. Cable Type 2.6 .102 2.67 .105 RG 316 (50 Ω) Ø Max. Cable Type 2.6 .102 2.67 .105 RG 316 (50 Ω) RG 179 (75 Ω) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 Part No. 1392020-1 3-1393668-4 23.9 [.941] Bulkhead Cable Jack for female connectors Ø 5.8 [.228] 4.75 [.187] RG 179 (75 Ω) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 Part No. 1392019-1 3-1393668-0 9.35 [.368] 23.9 [.941] Right-Angle Bulkhead Jack for male connectors A Ø 6.0 [.236] Dim A 9.6 [.378] Ø 4.05 [.159] 13.1 [.516] Ø Max. Cable Type RG 316 (50 Ω ) 22.4 .882 24.0 .945 2.6 .102 2.67 .105 2.67 .105 2.67 .105 Dim A Ø Max. Cable Type 18.7 .736 22.3 .878 18.7 .736 18.7 .736 2.6 .102 2.6 .102 3.0 .118 2.67 .105 RG 316 (50 Ω) 19 .748 Width Across Flats of Hex Profile Part No. 3.2 .126 1-1393668-2 RG 179 (75 Ω) 3.2 .126 3.2 .126 RG 179 (75 Ω) RG 179 (75 Ω) 2-1393668-8 3-1393668-6 Right-Angle Bulkhead Plug for female connectors Ø 6.0 [.236] A 9.35 [.368] Ø 4.75 [.187] 13.1 [.516] RG 316 (50 Ω) RD 316 (50 Ω) RG 179 (75 Ω) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 3.6 .142 3.2 .126 Part No. 1393668-4 1393668-8 1393668-7 2-1393668-4 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 240 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts (50 Ω/75 Ω) (Continued) Bulkhead Plug, PC Board connection for DIN 41612 M female connectors 17.9 [.705] 9.35 [.368] 5.08 [.200] Ø 4.75 [.187] Part No. 1-1393662-0 Ø 1.0 [.039] Pitch 2.54 [0.10] Recommended Mounting Hole Right-Angle Bulkhead Jack, PC Board for DIN 41612 M male connectors 17.9 [.705] 3.0 [.118] 9.6 [.378] 4.05 [.159] Part No. 1-1393662-4 6.9 [.272] 5.08 [.200] Right-Angle Bulkhead Plug, PC Board for SIEDECON female connectors 17.8 [.701] 3.0 [.118] 9.35 [.368] Ø 4.75 [.187] Part No. 1-1393662-2 6.9 [.272] 5.08 [.200] Ø 1.0 [.039] Pitch 2.54 [0.10] Recommended Mounting holes for Part No. 1-1393662-2 and 1-1393662-4 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant. 241 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208