1542006-6

8 7 6 4 5 3 2 1 REVISION(S) 6-FIN HEAT SINK: 1.375 DIA. 0.785 HT. 2 LTR DESCRIPTION O ECN: 0S60-0271-04 E.T 11/9/04 B.P 11/22/04 INIT APP'D A ECR-06-007721 E.T 3/29/06 C.W 3/29/06 D D NOTE: 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 3 1 4-LEG CLIP SIZE: 35mm 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. BARE DIE PACKAGE: 2.0 INCH - LB TORQUE = 8.1 LBS FORCE 2.5 INCH - LB TORQUE =10.1 LBS FORCE C C FULL SIZE LID PACKAGE: 2.0 INCH - LB TORQUE = 6.9 LBS FORCE 2.5 INCH - LB TORQUE = 8.7 LBS FORCE .012±.001 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 1.375±.020 4. RoHS COMPLIANT AND CERTIFIED. B DETAIL A SCALE =6X .655 MAX .095 B A .785 B .238 ±.005 B .108±.005 1" - 27 UNS - 2A THREAD 1.384 LIP LEG 1.390 1.474 A 8 7 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 ° C/W @ ° C/W @ ° C/W @ ° C/W @ Ambient 200 LFM 400 LFM 600 LFM 9.27 3.76 2.59 2.19 8.65 3.74 2.64 1.87 8.15 3.73 2.32 1.92 DO NOT SCALE Power 5 Watts 10 Watts 15 Watts UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . DRAWN BY: ENGINEER: . DATE E.TAO FILENAME CUSTOMER DRAWING SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE MATERIAL: 11/9/04 SEE NOTE DATE 11/22/04 B.PETROCELLI . SECTION B-B PROJECT SYSTEM CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 1.25:1 SIZE: TNIRD ANGLE PROJECTION A A TITLE: 35mm LOW PROFILE HEATSINK ASSEMBLY (HTS560-U) PART NO: DWG. NO. 1542006-6 SHEET: 1 OF 1 REV: C-1542006-6 A