1616048-4

HARTMAN Power Switching AC Contactors D18, DH18 and DHR18 Series, Rated up to 50 Amps, 115/200 VAC, 400 Hz Product Facts n 3PDT, Center off n Gasket sealed or Hermetically sealed n Meets many requirements of MIL-PRF-6106 For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. Performance Data General Characteristics Electrical Characteristics Temperature Range — -55°C to +71°C Operating Cycles (Life) at Rated Resistive Load, Min. — 50,000 cycles Operating Cycles (Life) Mechanical, Min. — 100,000 cycles Dielectric Strength — All Circuits to Ground — 1,500 Vrms Circuit to Circuit — 1,500 Vrms Coil to Ground and Aux. Contacts — 1,000 Vrms Insulation Resistance, Initial — 100 megohm min. Altitude — D-18 — 50,000 ft. DH-18, DHR-18 — 80,000 ft. Weight, Max. — .94 to 1.50 lbs Contact Arrangement — 3PDT, Center Off Rated Operating Voltage — 115/200 VAC, 400 Hz Resistive Rating — 50 Amps Inductive Rating — 50 Amps Motor Rating — 30 Amps Lamp Rating — 15 Amps Rupture Rating — 400 Amps Sinusoidal Vibration — 10 G @ 70 to 2,000 Hz Shock, Max. — 25 G Operate Time @ Nom. Voltage, Max. — 35 msec Release Time @ Nom. Voltage, Max. — 15 msec Bounce Time @ Nom. Voltage, Max. — 5 msec Coil Characteristics Duty Cycle — AC Continuous (Type E, See diagram below) DC Continuous (Type A-D, See diagram below) Operating Voltage, Nom. — 28 Vdc Pickup Voltage @ 25°C, Max. — Coil Type A — 18 Vdc Coil Type B — 15 Vdc Dropout Voltage @ 25°C, Max. — Coil Type A — 1.5 to 7 Vdc Coil Type B — 2.5 to 6.5 Vdc Coil Resistance ±20% @ 25°C — 175 Ohms Coil Current @ 25°C, Max. — .175 Amp Coil Type A — DC Continuous B — DC Continuous C – DC Continuous with Suppression D — DC Continuous Economical w/Suppression For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. E – AC Continuous 6–16 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com HARTMAN Power Switching AC Contactors D18, DH18 and DHR18 Series Contactors, Rated up to 50 Amps, 115/200 VAC, 400 Hz (Continued) Mounting Style A Mounting Style B 6 HARTMAN Power Switching AC Contactors Mounting Style C Mounting Style D For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. 6–17 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com HARTMAN Power Switching AC Contactors D18, DH18 and DHR18 Series Contactors, Rated up to 50 Amps, 115/200 VAC, 400 Hz (Continued) Circuit Configurations (Consult factory for other available circuit configurations) Circuit Configuration 1 Circuit Configuration 2 Circuit Configuration 3 Circuit Configuration 4 Circuit Configuration 5 Circuit Configuration 6 Circuit Configuration 7 HARTMAN Part Number D-18 D-180A D-18AA D-18F D-18ZZC DH-18 DH-18Y DR-18E-5 Construction Type Gasket/Vented Gasket/Vented Gasket/Vented Gasket/Vented Gasket/Vented Hermetically Sealed Hermetically Sealed Gasket/Vented Mounting Style A D A A B A A C Coil Type A C B B D A A E Circuit Config. 1 6 2 3 4 1 7 5 TE Part Number 1616048-1 1616048-2 1616048-3 1616048-4 1-1616957-3 1616050-1 1616524-3 1616099-1 For factory-direct application assistance, phone 419-521-9500 or fax 419-526-2749. 6–18 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com