1630184-9

High Power Capacitor Discharge Resistors Type YP Series Key Features Flameproof Silicone Coating Stainless Steel Mounting Terminals For Direct Mounting On Capacitors Premium Quality Resistive Wires Custom Designs Possible Innovative Design The YP series resistors are coated with multilayer silicone to give an excellent protection to the resistance wire at temperatures from -55°C to 350°C. The terminals are designed for quick and easy mounting on capacitors and have a mounting pitch of 22 and 31.8 mm. These are wirewound ceramic core resistors designed for voltage balancing of series connected aluminium electrolytic capacitors. These resistors are also suitable for capacitor voltage discharge safety applications in high voltage circuits. Ideally suited for industrial grade capacitors. Characteristics – Electrical Type Power Rating @70°c YP8 8.5 YP10 11 *TCR ±30PPM on request Limiting Voltage Resistance Range TCR* (PPM/°c) 685V 940V 1R0 – 82K 1R0 – 120K ±100 ±100 Operating Temperature range -55 ~ 200°C Climatic Category 55/200/56 Environmental Characteristics Characteristics Standards Endurance at Rated Temperature ∆R < 5% + 0R05 Short Term Overload ∆R < 2% + 0R05 Damp Heat Steady State ∆R < 5% + 0R05 Climatic Sequence ∆R < 5% + 0R05 Solderability 1773300 Rev B 03/2022 Test Methods Full Rated Power for 1000hrs, (1.5hrs ON, 0.5hrs OFF) at 25°c 10 x Rated Power for 5 secs, IEC115-1, Clause 4.1.3 90-95% RH, 40°c, 56 days, IEC 115-1, clause 4.17.3 As pe IEC 115-1, Clause 4.23 Not applicable, Resistor is Designed for Screw Mounting Only 25 N Pull Test for 10 Seconds, IEC 1151-1, Clause 4.16 Terminal Strength ∆R < 0.5% + 0R05 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help High Power Capacitor Discharge Resistors Derating Curve The Derating Curve specifies the maximum allowable power at a particular ambient temperature while ensuring that the maximum surface temperature remains within the designated limit. Temperature Rise Graph 1773300 Rev B 03/2022 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help High Power Capacitor Discharge Resistors Dimensions Type A ±1mm 22 31.8 YP8 YP10 B max. 40 50 Dimension C ±1mm 15 15 D ±1mm 21 21 E ±1mm 9.5 9.5 Application Notes Where the resistor is subject to a pulse load, please ensure that the average power dissipated remains below the rated power specified. Resistor performance with pulse loads should be fully application tested prior to use. How To Order YP 8 18K J Common Part Power Rating Resistance Value Tolerance 2k (2000 ohms) 2K0 YP – Capacitor Discharging Resistor 8-8 Watts 10K (10000 ohms) 10K 18K (18000 ohms) 18K 10-10 Watts 27K (27000 ohms) 27K F-±1% G-±2% J-±5% 47K (47000 ohms) 47K 1773300 Rev B 03/2022 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help