General Purpose
Low Power PCB Relays
SCHRACK
Miniature PCB Relay ORWH
n Compact
relay with 1 form A and 1 form C contact arrangement
switching capacity
n Flux proof or sealed type available
n 6kV dielectric strength type available
n 15A
Typical applications
Appliances, HVAC, emergency lighting.
Zt
Approvals
Insulation Data
UL E82292, TUV R50138967
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A, 1 NO
1 form C, 1 CO
Rated voltage
28VDC, 277VAC
Max. switching voltage
28VDC, 277VAC
Rated current
10A
Contact material
AgZnO, AgCdO, AgNi
Min. recommended contact load
100mA, 5VDC
Frequency of operation
600 ops./h
Operate/release time max.
10ms/5ms
Electrical endurance
AgZnO: form A, 10A, 250VAC, res., +85°C, Class B or F only 100x103 ops.
AgNi: 15A, 125VAC, res., +23°C
6x103 ops.
AgCdO: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
AgNi: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
AgZnO: 15A, 125VAC, res., +23°C
6x103 ops.
Contact ratings, form A/form B
10A/6A 250VAC resistive
10A/6A 28VDC resistive
Mechanical endurance, DC coil
10x106 operations
Coil Data
Coil voltage range
3 to 48VDC
Operative range, IEC 61810
2
Coil insulation system according UL
Class A, B, F
Coil versions, DC coil
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10 %
mW
003 3 2.1 0.3 25 360
005
5
3.5
0.5
70.0
360
006 6 4.2 0.6 100 360
009 9 6.3 0.9 225 360
012 12 8.4 1.2 400 360
024 24 16.8 2.4 1600 360
048 48 33.6 4.8 6400 360
Initial dielectric strength
between open contacts
750Vrms
between contact and coil
1500Vrms
Clearance/creepage
between open contacts
>1.6mm
between contact and coil
>3.2mm
Clearance/creepage
between open contacts, standard type
>1.6mm
for 6kV dielectrial strength type
>4mm
between contact and coil, standard type
>3.2mm
for 6kV dielectrial strength type
>4mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-30°C to 85°C
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight
Vibration resistance (functional)
1.5mm, 10-55 Hz
Shock resistance (functional)
10g for 11msec
Shock resistance (destructive)
100g
Weight 9.5g
Resistance to soldering heat THT
IEC 60068-2-20
RTII: 270°C/10s
RTIII: 260°C/5s
Packaging/unit tube/25, carton box/1000
Accessories
Product Code
27E1064
Description
Socket, rated 10A at 300VAC. UL Recognized for US
and Canada. Designed to fit same suggested board
layout as relay.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
09-2021, Rev. 0921
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1
Form A, SPST-NO
Issued 3-03 (PDF Rev. 3-04)
Ordering Information
Outline Dimensions
Suffix = Custom model.
ORWH-SS-112D,N000
ORWH-SS-124D,N000
ORWH-SS-148DM,N000
ORWH-SH-124D,N000
Catalog 1308242
ORWH-SS-105D,N000
ORWH-SH-148D,N000
ORWH-SH-105D,N000
ORWH-SH-106D,N000
General
B Purpose
.61ORWH
± .012
(15.5 ± .3)
Low Power PCB Relays
-SS
.748 ± .012Typical Part Number
(19.0 ± .3)
1. Basic Series:
ORWH = Miniature Power PC board relay.
OEG
Wiring Diagram (Bottom View)
-1
12
D
M
,N000
SCHRACK
ly to maintain the following items in stock for immediate delivery.
2. Enclosure:
ORWH-SS-148D,N000
ORWH-SS-106D,N000
ORWH-SS-112DM,N000
.622 ±SH
.02= Sealed plastic case
SS = Vented (flux-tight)*
plastic case.
ORWH-SS-109D,N000
ORWH-SS-124DM,N000
(15.8 ± .5)
ORWH-SS-112D,N000
ORWH-SS-148DM,N000
3. Number of Poles:
ORWH-SS-124D,N000
ORWH-SS-105D,N000
1 = 1 pole
000
000
000
000
Miniature PCB Relay ORWH (Continued)
4. Coil Voltage:
.61 ± .012
(15.5 ± .3)
Wiring06
Diagram
03assignment
= 3VDC
= 6VDC (Bottom
12View)
= 12VDC
.157 ± .008
Terminal
(4.0 ± .2)
05 = 5VDC
09 = 9VDC
24 = 24VDC
Bottom view on solder pins
48 = 48VDC
PCB layout
PC Board Layout (Bottom View)
5. Coil Input: TERMINAL DIMENSIONS:
D = Standard COIL: 0.024 (0.6) DIA.
LOAD: 0.12 x 0.35 (0.3 x 0.9)
6. Contact Arrangement:
Blank = 1 Form C, SPDT
.236 ± .004
(6.0 ± .1)
M = 1 Form A, SPST-NO
7. Option:
,N000= Standard model.
.236 ± .004
(6.0 ± .1)
Note:
Only necessary
Other Suffix
= Custom
model. terminals are
present on 1 Form A models.
.079 ± .004
(2.0 ± .1)
* Not suitable for immersion cleaning
.48 ± .004
(12.2 ± .1)
5 – .05 DIA
(1.3)
Our authorized
distributors
more likely
to maintain the following items in stock for immediate delivery.
PC Board
Layoutare
(Bottom
View)
ORWH-SH-112DM,N000
ORWH-SH-124DM,N000
ORWH-SH-105D,N000
.236Socket
± .004
ORWH-SH-106D,N000
(6.0 ± .1)
Dimensions
ORWH-SS-148D,N000
ORWH-SS-106D,N000
ORWH-SS-109D,N000
ORWH-SS-112D,N000
ORWH-SS-124D,N000
ORWH-SS-112DM,N000
ORWH-SS-124DM,N000
ORWH-SS-148DM,N000
ORWH-SS-105D,N000
ORWH-SH-109D,N000
ORWH-SH-112D,N000
ORWH-SH-124D,N000
ORWH-SH-148D,N000
27E1064
.236
± .004 socket is rated 10A @ 300VAC. UL Recognized for US and
Wiring Diagram (Bottom View)
Canada.
(6.0 ± .1) Designed to fit same suggested board layout as relay.
Outline Dimensions
ecessary terminals are
t on 1 Form A models.
.61 ± .012
.748 ± .012
.270 MAX.
5(15.5
– .05± DIA
.916 MAX.
.3)
(19.0 ± .079
.3) ± .004
(6.85) (1.3)
(23.35) .48 ± .004
(2.0 ± .1)
(12.2 ± .1)
.167 MAX.
(4.25)
.660 MAX.
.622 ± .02 (16.75)
(15.8 ± .5)
ecognized for US and
d layout as relay.
.157 ± .008
(4.0 ± .2).016 TYP.
PC Board Layout (Bottom View)
(.40)
TERMINAL DIMENSIONS:
COIL: 0.024 (0.6) DIA.
LOAD: 0.12 x 0.35 (0.3 x 0.9)
MAX.
.25)
Dimensions are shown for
reference purposes only.
.236 ± .004
Dimensions are in inches over (6.0 ± .1)
(millimeters) unless otherwise
.236 ± .004
specified.
(6.0 ± .1)
Note: Only necessary terminals are
present on 1 Form A models.
.079 ± .004
(2.0 ± .1)
Socket
Specifications and availability Typical product code www.tycoelectronics.com
s are in inches overProduct code structure
ORWH -SH
subject10A
to change.
Technical support:
s) unless otherwise
439
27E1064 socket is rated
@ 300VAC. UL Recognized for US and
Refer to inside back cover.
Canada. Designed to fit same suggested board layout as relay.
Type
ORWH Miniature PCB Relay ORWH
.270 MAX.
MAX.
(6.85)
Category .916
of
protection
(23.35)
.167 MAX.
SS Flux proof
SH Wash tight
(4.25)
Number of poles
MAX.
1
1 pole .660
(16.75)
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Coil version
D
Standard
H High temperature type
Contact arrangement
TYP.
Blank 1 form C,.016
1(.40)
CO
M 1 form A, 1 NO
Contact material
Blank AgCdo
1
AgZnO
5 AgZnO + Au plating
Dimensions are
over+ Au plating
Dimensions
3 are shown
AgNi for
7 in inches
AgNi
reference purposes only.
(millimeters) unless otherwise
Insulation system designation
specified.
Blank Class 105 (A)
B Class 120 (B)
Option material
Blank Standard
H Insulation plate use type
WG For domestic appliances (IEC 60335-1, 4 Edition);
Suffix
,000 Standard
2
09-2021, Rev. 0921
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Specifications and availability
subject to change.
.48 ± .004
(12.2 ± .1)
5 – .05 DIA
(1.3)
-1 12 D
Specifications and availability
subject to change.
F
www.tycoelectronics.com
Technical support:
439
Refer to inside back cover.
F = Class 155 (F)
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
M
1
F WG ,000
www.tycoelectronics.com
Technical support:
439
Refer to inside back cover.
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
General Purpose
Low Power PCB Relays
SCHRACK
Miniature PCB Relay ORWH (Continued)
Product code
ORWH-SH-105D1F,000
ORWH-SS-105D1F,000
ORWH-SH-105DM1F,000
ORWH-SS-109D1F,000
ORWH-SH-112D1F,000
ORWH-SS-112D1F,000
ORWH-SH-112DM1F,000
ORWH-SS-112DM1F,000
ORWH-SH-124D1F,000
ORWH-SS-124D1F,000
ORWH-SH-124DM1F,000
ORWH-SS-124DM1F,000
ORWH-SH-105H3F,000
ORWH-SS-105H3F,000
ORWH-SH-112H3F,000
ORWH-SS-112H3F,000
ORWH-SH-112HM3F,000
ORWH-SS-112HM3F,000
ORWH-SS-118H3FH,000
ORWH-SH-124H3F,000
ORWH-SS-124H3F,000
ORWH-SH-124HM3F,000
ORWH-SS-124HM3F,000
09-2021, Rev. 0921
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Enclosure
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Flux proof
Wash tight
Flux proof
Wash tight
Flux proof
Coil
5VDC
Coil
Standard
9VDC
12VDC
24VDC
5VDC
12VDC
18VDC
24VDC
High temp
Arrangement
1 From C, 1CO
1 From C, 1CO
1 From A, 1NO
1 From C, 1CO
1 From C, 1CO
1 From C, 1CO
1 From A, 1NO
1 From A, 1NO
1 From C, 1CO
1 From C, 1CO
1 From A, 1NO
1 From A, 1NO
1 From C, 1CO
1 From C, 1CO
1 From C, 1CO
1 From C, 1CO
1 From A, 1NO
1 From A, 1NO
1 From C, 1CO
1 From C, 1CO
1 From C, 1CO
1 From A, 1NO
1 From A, 1NO
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Cont.mat. Insulation
AgZnO
Class F
AgNi
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Option
Standard Type
Standard Type
Insulation pl.
Standard Type
Part number
1-1721150-0
2071448-5
2071448-3
2071448-4
1-1721150-3
1721150-5
2071448-8
2071448-2
1-1721150-5
2-2071448-0
1-2071448-5
1-2071448-8
2071448-6
2071448-7
2071448-9
1-2071448-2
1-2071448-0
1-2071448-3
1721948-6
1-2071448-6
1-2071448-9
1-2071448-4
1-2071448-7
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
3
