17PCSA104MA24N

Spindle Operated Potentiometers Type 17P Series Key Features I Polymer thick film element I Switch versions available I Dual gang version available I High reliability I Small versatile size I All plastic body I Plastic spindle I Flame retardant Applications I Audio I Industrial controls I Lighting I Appliances Specify the type 17P for applications where high insulation resistance and voltage proof are key requirements. The materials used in the all plastic body and spindle construction are UL approved making it a suitable component for domestic appliances and control systems where safety is of prime importance. This popular low cost potentiometer is suitable for industrial and professional applications. A range of approved switches can be added to the rear of the potentiometer, to produce rotary or push-push action mains switches. Characteristics - Environmental Characteristics - Electrical Resistance Range: 1K to 1M (linear), 4K7 to 470K (non linear) Limits of Resistance Change: 15% (after 1000hrs. endurance) 5% (20°C to 70°C) Resistance Value: 1, 2.2 and 4.7 in each decade Temperature Characteristics of Resistance: Resistance Tolerance: ± 20% (10% by selection) Bump Severity: 390m/s2, 4000 bumps Rated Dissipation at 20°C: 0.25W (linear), 0.125W (non linear) Vibration Severity: 10 - 500Hz, 0.75 mm or 98M/s2 Limiting Element Voltage: 350V DC or AC (rms) Climatic Category: 25/70/04 Electrical Rotation: 267° without switch, 232° with switch Mechanical Endurance: 20000 operations (minimum) Terminal Resistance: 5Ω, maximum Noise (ENR): 2% maximum (linear), 3% maximum (non linear) Operating Torque: 15mNm maximum Insulation Resistance: 4GΩ, minimum Mechanical Rotation: 300° nominal Voltage Proof: 1kV AC peak End Stop Torque: 350mNm maximum Characteristics - Mechanical Characteristics - Switch Switch Type: Current/Voltage Rating: On/Off Torque: B&D A&E P 1A 4A 10A 10A - 250V AC 1.0A - 24V DC 10A - 12V DC 0.3A - 250V AC 4A - 250V AC 40mNm maximum 40mNm maximum Life - 25,000 cycles minimum Initial Contact Resistance: 20mΩ 20mΩ Proof Voltage - 3kV minimum Contact Gap: 3mm 3mm 1773176 CIS BI 11/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help Spindle Operated Potentiometers Type 17P Series Dimensions Single Potentiometer PCB Layout Dual Potentiometer Single Switched Potentiometer Push-Push Switch PCB Layout Dual Potentiometer PCB Layout Bush Mounting Panel Cutout Rotary Switch PCB Layout L* - Standard shaft length 35mm All dimensions given from component side How to Order 17PE S Common Part A 102 Resistor Law M B Tolerance A - Linear 17PC - P.C. M - 20% B - Log 17PE - Eyelet K - 10% C - Inv. Log Product Identification S - Standard single X - Customer special D - Standard dual 25 Resistance Value The first two digits are significant figures of the resistance value and the third one denotes the number of zeros following. e.g. 4K7: 472 47K: 473 470K: 474 N C Shaft Length Detent FMF in mm 25mm standard minimum shaft length with P style switch is 19mm C - Centre detent Shaft Style A - Plain 6mm B - Slotted 6mm C - Flatted (5mm A/F) D - Flatted (4mm A/F) E - Plain 4mm F - Flatted 6mm (4.6mm A/F) Switch Details A - DPST 4A/250V AC B - SPST 1A D - DPST 1A E - SPST 4A N - No Switch P - Push push SPDT 10A P switch only available on single gang styles TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.