1811C10-130508

Materials -4 Flexible Polyolefin Product Facts Heat-shrinkable Flexible ■ Flame Retardant ■ Good resistance to fluids and heat ■ ■ 4 Molded Parts Applications Installation Operating Temperature Range TE molded parts in -4 material are designed for use in general harnessing applications where toughness is required and systems are occasionally exposed tofluids or heat. The adhesive-lined parts provide excellent sealing and strain relief at connector-cable terminations and transitions. -4 molded parts will shrink on the application of heat above 100°C [212°F]. -55°C to 135°C [-67°F to 275°F] Recommended installation temperature: 150°C [302°F] A wide range of shapes are available in this material. The standard color is black. Available in: Americas Europe Asia Pacific ■ ■ ■ 4-27 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Materials -4 (Continued) Specifications/Approvals Military TE SAE-AS81765/1, Type II SAE-AS85049/ 140, 141, 142 (material designator B) RT-1304  UL 224, File E85381 — — Product Characteristics Physical Thermal Electrical Water absorption Fluid resistance Tensile strength Ultimate elongation Specific gravity Heat aging for 168 h at 175°C [347°F] Heat shock for 4 h at 225°C [437°F] Low-temperature flex at -55°C [-67°F] Flammability (burn time) Dielectric strength — JP-4 fuel, aviation gasoline, water, hydraulic fluid Specification Requirements 1800 psi (min.) 400% (min.) 1.3 (max.) Ultimate elongation 300% (min.) No dripping, flowing, or cracking No cracking Average flame time: 120 s (max.) 350 V/mil (min.) 0.3% (max.) Tensile strength 8.5 MPa psi (min.) Ultimate elongation 200% (min.) Test Method ASTM D 412 ASTM D 412 ASTM D 792 RT 1304 Sec. 4.3.3 RT 1304 Sec. 4.3.5 RT 1304 Sec. 4.3.4 ASTM D 635 ASTM D 149 ASTM D 570 RT-1304 Sec. 4.3.3 4-28 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015