184340-1

Section Catalog 1654359-1 Sealed Sensor Connector (SSC) System Issued 4-2010. Main Catalog 1654400-1 Chapter 18 – Issued 4-2010. Introduction Product Features ■ Robust housing, glass filled PBT for high temperature applications ■ Terminal Position Assurance (TPA) to assure proper position of contact in housing ■ Damage protected internal silicone seal interface ■ Industry common .070 series receptacle and tab available in gold or tin plate ■ High density 5 mm centerline spacing ■ Audible “Click” during mating ■ Multiple positions available ■ Multiple keying and housing colors available Technical Documents Product Specification: 108-1790 Application Specification: 114-8004 The Sealed Sensor Connector (SSC) System has been developed to meet the severe requirements of the automotive under hood environment. Additionally, the system’s waterproof and high temperature capabilities make it ideal for many different severe environmental applications. Both the wire seal and the connector seal ring are made of high temperature silicone and have 3 sealing ridges on their external circumferences for effective sealing and ease of assembly and connector mating. Wire sealing is acheived by means of an individual wire seal which is inserted on the wire and crimped in the insulation support of the contact simultaneously with the wire. Interfacial sealing is achieved with a pre-assembled seal ring located in the plug assembly. Another important feature of the plug assembly is the yellow double-lock plate. This pre-assembled plate is shipped in the “open” position and once closed provides additional retention of the contact in the housing as well as helping to detect contacts which are not fully seated. Also, when mating, the SSC Housing provides an audible “click” to indicate proper connector mating. For applications where more than one connector is required, various keying and colors are available. The contact used in the system is an industry standard .070 tab and receptacle and comes in tin or gold platings. All specifications subject to change. Consult TE Connectivity for latest specifications. Performance Specifications: Resistance: 3 m⍀ max. (initial) 10 m⍀ max. (final) Insulation Resistance: 100 m⍀ max. (initial) Dielectric Strength: 1.0 K Vac Sealing: 7 Psi initial 4 Psi after heat age Conforms to IEC 529 I.P. 65/67 standard Temperature Range: Nylon Housings: –40 °C to +150 °C PBT Housings: –40 °C to +125 °C Current Rating: Size (AWG) Rated Current 20 10 Amps 18 11 Amps 16 13 Amps 14 17 Amps 18-1 Section Catalog 1654359-1 Issued 4-2010. Sealed Sensor Connector (SSC) System Contact System Main Catalog 1654400-1 Chapter 18 – Issued 4-2010. Receptacle Contact Technical Features Insertion No. of Positions: Force: 1USCAR Position 5.3.2 (8/97) Housing VibrationMaterial: (per USCAR): Glass-filled USCAR 5.4.5 PBT (Rev. 4/01) Random Vibration Wire Size Range: Profile 2 (22 –14 AWG) Dry Circuit Resistance: 2.0 mm 0.30– ⱕ 20 milliohms final for crimp Product Specification: and interface per USCAR 5.3.1 108-1790 (Rev. 4/01) Reduction Coefficient: Isolation Resistance: 1 ⬎ 20 Mega-ohms @ 500 V DC per USCAR 5.3.2 (Rev. 8/97) Specification: Application 114-8004 Tool: Extraction Ref. application Keying Options:specification: 114-8004 See page 18-6 Receptacle Contacts Wire Size Range (mm2 ) 0.5–2.0 0.5–1.0 (AWG) (20–14) (22–18) Wire Insulation Diameter Part Numbers Material and Finish Strip Form Package Quantity LoosePiece Package Quantity Applicator Hand Tool Phosphor bronze, pre-tin plated 184030-3 – – – 680114-2 755262-1 Phosphor bronze, selective gold plated 184030-1 – – – – – Phosphor bronze, selective gold plated 184095-1 – – – 680143-2 – Phosphor bronze, pre-tin plated 184095-2 – (mm) 1.2–2.7 1.2–2.1 Note: All Part Numbers are RoHS and ELV compliant. Due to part number availability, please contact TE Connectivity before ordering. 18-2 All specifications subject to change. Consult TE Connectivity for latest specifications. Section Catalog 1654359-1 Issued 4-2010. Sealed Sensor Connector (SSC) System Housings and Connectors Main Catalog 1654400-1 Chapter 18 – Issued 4-2010. Keying Options Technical Features No. of Positions: 4 Positions Housing Material: Glass-filled PBT Wire Size Range: 0.30– 2.0 mm2 (22 –14 AWG) Product Specification: 108-1790 Reduction Coefficient: 0.6 Application Specification: 114-8004 Part Numbers No. of Positions Keying Options A Housing Color Black Plug Assembly 184046-1 Cap Housing Locking Device Cover and Lever Mating PCB Header Right-Angle Vertical – – – – – – – – – – – – – – – – – – – – – – – – – 184149-1 B Black 184048-1 184274-1 4 Black 184050-1 184275-1 C Gray 184050-2 184275-2 D Black 184052-1 184276-1 Note: All Part Numbers are RoHS and ELV compliant. Due to part number availability, please contact TE Connectivity before ordering. 18-6 All specifications subject to change. Consult TE Connectivity for latest specifications. Section Catalog 1654359-1 Issued 4-2010. Sealed Sensor Connector (SSC) System Housings and Connectors Main Catalog 1654400-1 Chapter 18 – Issued 4-2010. Sealed Sensor Connector (SSC) System (continued) Part Numbers No. of Positions Keying Options Housing Color 2x2 C Black 184297-1 184388-1 184301-1 184380-1 184351-1 184396-1 2x2 C Natural 184301-2 184380-2 184396-2 2x2 D Black 184299-1 184390-1 184303-1 184381-1 184353-1 184397-1 2x2 D Natural 184303-2 184381-2 184396-2 2x2 E Black 184320-1 184382-1 184398-1 2x2 F Black 184322-1 184383-1 184399-1 2x2 G Gray 184324-2 184384-2 184400-2 2x2 G Natural 184324-1 184384-1 184400-1 2x2 H Gray 184326-2 184385-2 184401-2 2x2 H Natural 184326-1 184385-1 184401-1 Plug Assembly Cap Housing Locking Device Cover and Lever Note: All Part Numbers are RoHS and ELV compliant. Due to part number availability, please contact TE Connectivity before ordering. 18-10 All specifications subject to change. Consult TE Connectivity for latest specifications. Mating PCB Header Right-Angle Vertical Section Catalog 1654359-1 Issued 4-2010. Sealed Sensor Connector (SSC) System Housings and Connectors Main Catalog 1654400-1 Chapter 18 – Issued 4-2010. Sealed Sensor Connector (SSC) System Technical Features No. of Positions: 6 Positions Housing Material: Glass-filled PBT Wire Size Range: 0.30– 2.0 mm2 (22 –14 AWG) Product Specification: 108-1790 Reduction Coefficient: 0.55 Application Specification: 114-8004 Part Numbers No. of Positions 6 Keying Options Housing Color Plug Assembly Cap Housing Locking Device Cover and Lever Mating PCB Header Right-Angle Vertical A Black 184060-1 – – – – – A Black – Circuits #1 & 6 Blocked 184026-1 – – – – – A Black – Circuit #6 Blocked 184313-1 – – – – – A Black – Circuit #4 Blocked 184318-1 (obs) – – – – – A Black – Circuits #3 & 6 Blocked 184452-1 – – – – – A Black – Circuit #3 Blocked 184372-1 184341-1 – – – – – B Black 184124-1 – – – – – B Black – Circuits #1 & 6 Blocked 184132-1 – – – – – C Black 184126-1 – – – – – C Black – Circuits #1 & 6 Blocked 184134-1 – – – – – D Black 184128-1 D Black – Circuits #1 & 6 Blocked 184136-1 – – – – – Note: All Part Numbers are RoHS and ELV compliant. All specifications subject to change. Consult TE Connectivity for latest specifications. 18-11