1955547-1

4 1 RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. C 2 3 LOC REVISIONS DIST ALL RIGHTS RESERVED. COPYRIGHT P 46,90 D DESCRIPTION DATE DWN APVD 2 V 5,66 A LTR NOTES/SPECIFICATION: D 1 HEADER ACCEPTS TYPES I, II, 2 MECHANICAL SPECIFICATION: & III OF PCMCIA STANDARD MEMORY CARD 2.1. DURABILITY 2.1.1. OFFICE ENVIRONMENT: 10000 CYCLES MINIMUM A VOLTAGE IDENTIFICATION 63,82 0,20 1,85 0,20 83,68 72,01 2.1.2. HARSH ENVIRONMENT: 5000 CYCLES 2.2. CONTACT RETENTION FORCE: 1Kg MINIMUM 3 ELECTRICAL SPECIFICATION: 3.1. CONTACT RESISTANCE: 40 MILLI OHMS MAX. 3.2. DIELECTRIC WITHSTANDING VOLTAGE: 500 Vrms FOR 1min. 3.3. INSULATION RESISTANCE: 1000 MEGA OHMS MIN. 3.4. CURRENT CAPACITY: 0,5 AMPS PER PIN. 4. ENVIRONMENTAL SPECIFICATIONS: 4.1. STORAGE ENVIRONMENT: -40 C TO +70 C, 95% MAX. RELATIVE HUMIDITY (NON 4.2. OPERATION TEMPERATURE: -20 CONDENSING) C TO +60 C, 95% MAX. RELATIVE HUMIDITY (NON CONDENSING) 4.3. THERMAL SHOCK: 6 CYCLES (1 CYCLE PER HOUR) WITH CONNECTOR ENGAGED WITH C 50,80 5,00 STAND-OFF HEIGHT 63,0 10,4 5 1,27 2,0 DIM "A" POSITION No. 5 1,17,34,35,51,68 3.5 36,67 4.25 THE OTHERS Ni : 1,5µm MIN. (OVERALL) PLATING OF CONTACT: Au : 0,03µm MIN. (CARD SIDE) TIN: 2µm MIN. (PCB SIDE) ALL PARTS PACKAGED IN TRAYS UNLESS REQUESTED: CONNECTOR TO PRINTED CIRCUIT BOARD ASSEMBLY: SCALE 20:1 DETAIL V 52,1 B 6 7 33x1,27=41,91 58,93 TYP 0,1 TYP 3,58 45,0 LENGTH OF CONTACTS: "A" NO.68 7,68 NO.35 3,47 3,50 3,00 0,30 NO.34 NO.1 +0,10 0,4 0 0,45 0,03 RIB ORGANISER 54,20 1. PLACE THE CONNECTOR ON THE PRINTED CIRCUIT BOARD. SECTION A-A SCALE 2:1 THE SOLDER TAILS, RETENT CLIPS SHOULD BE SEATED IN THE RESPECTIVE HOLES (THICKNESS: 1,60mm 4 0,1mm) 3. SOLDER PROCESS ENTIRE PRINTED CIRCUIT BOARD ASSEMBLY NO.2 B A SLIGHT SNAP IS FELT WHEN THE CONTACT IS FULLY SEATED. 41,91 NO.1 . 2. PUSH FIRMELY DOWN ON CENTER OF THE HOUSING THEN SOLDER RETENTS. RECOMMENDED PCB LAYOUT . NO.33 NO.34 1955547-2 3.3V TE PN. VOLTAGE IDENTIFICATION 1,905 1,905 CONTACT COPPER ALLOY 2 1 ORGANISER THERMO PLASTIC UL 94 VO 1 1 HOUSING 2 6,10 REF THIS DRAWING IS A CONTROLLED DOCUMENT. 58,93 63,00 2x 2,21 0,05 0.05 A B PLATED THROUGH HOLE DWN GROUND CONTACT DESCRIPTION THERMO PLASTIC UL 94 VO COLOR: BLACK PHOSPHOR BRONZE TIN: 2µm MIN MATERIAL DIMENSIONS: MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH APVD COLOR: BLACK FINISH TE Connectivity CHK 1 1471-9 (3/11) 68 ITEM NO QTY 68x 0,96 0,05 PLATED THROUGH HOLE 5V 4 3 NO.68 NO.67 1,85 3 1,27 5,85 REF 63,82 NO.35 NO.36 1,905 1955547-1 A C EXTREMES OF -55 C TO +70 C. A NAME PRODUCT SPEC APPLICATION SPEC SIZE WEIGHT A2 CAGE CODE RESTRICTED TO DRAWING NO SCALE SHEET OF REV