2-1241418-3

THIS DRAWING IS UNPUBLISHED. C COPYRIGHT2000 6 5 4 3 2000 RELEASED FOR PUBLICATION LOC ALL RIGHTS RESERVED. Tyco Electronics AMP GmbH VERSION A 0.05 F # 0.5 C 0.2 SPRING / Ueberfeder MATERIAL: X10CrNi 18-8 2 4.1 B VERSION B 0.1 SINGLE WIRE SEALING SYSTEM Einzeldichtungssystem F # 0.5 0.1 LTR 2 DESCRIPTION APVD Dimension 1.05 was at misleading position 11JAN2017 MAH. BECK A14 Dimension min. 1.25 was at misleading position 08AUG2017 FRAN BECK A15 NEW VARIANT 5-1241400-1; 5-1241410-1 and 5-1241410-3 09APR2018 FRAN BECK A16 NEW PN 1-2333550-3; 1-2333551-3; 1-2333552-3 AT SHEET 03DEC2020 2 FRAN BECK B A 5:1 A D 9 (0.3) 1 max. 0.3 CUT OFF 4.3+0.1 7.8 3 4 7 SINGLE WIRE SEAL 3 Bestell-Nr. 3 5.75 0.1 C 1241416-3 A SILVER PLATED versilbert 1241416-1 A 1241414-3 A 1241414-1 A >2.5-4.0 >1.0-2.5 3.4-4.5 2.2-3.7 CuNiSi CuNiSi TIN PLATED verzinnt SILVER PLATED versilbert TIN PLATED verzinnt SILVER PLATED versilbert 1241412-3 A 1241412-1 A 5-1241410-3 A SILVER PLATED versilbert A SILVER PLATED versilbert 1241410-3 8 A 0.35-0.5 1.4-2.7 1.2-2.3 CuNiSi CuNiSi TIN PLATED verzinnt TIN PLATED verzinnt A SILVER PLATED versilbert A SILVER PLATED versilbert 1-1241408-3 4.0-6.0 3.4-4.3 CuNiSi 1241408-1 A TIN PLATED verzinnt 1241406-3 A SILVER PLATED versilbert 1241406-1 A 1241404-3 A 1241404-1 A 1241402-3 A 1241402-1 A 5-1241400-1 A 1241400-1 8 A >2.5-4.0 >1.0-2.5 0.5-1.0 0.2-0.5 ORDER NO. WIRE RANGE STRIP Drahtgroessen Bestell-Nr. Bandware 4805 (3/11) Rev. Bereich (mm²) 3.4-4.5 2.2-3.0 1.4-2.1 1.1-1.6 INSULATIONIsolations- (mm) CuNiSi CuNiSi CuNiSi CuNiSi MATERIAL Werkstoff TIN PLATED verzinnt SILVER PLATED versilbert TIN PLATED verzinnt SILVER PLATED versilbert TIN PLATED verzinnt TIN PLATED verzinnt TIN PLATED verzinnt SURFACE IN CONTACT AREA Oberflaeche im Kontaktbereich 3.5 5.9 7.7 19.95 G = 4.0 D Dr = 1.7 E = 2.8 3.0 5.4 7.2 19.95 G = 3.0 D Dr = 1.1 E = 2.2 2.5 4.9 6.7 19.95 G = 2.2 D Dr = 0.8 H1= 7.8 H2= 6.7 K = 7.5 D Iso = 5.5 E = 5.3 4.5 6.0 7.8 19.95 G = 5.6 D Dr = 2.9 E = 4.6 4.0 5.2 6.8 19.05 G = 4.8 D Dr = 2.4 E = 3.8 3.5 4.7 6.3 19.05 G = 4.0 D Dr = 1.7 E = 2.8 3.0 4.2 5.8 19.05 G = 3.0 D Dr = 1.1 E = 2.2 2.5 3.8 6.6 19.05 G = 2.2 D Dr = 0.8 A B C F WIRE CRIMP Drahtcrimp CRIMP DIMENSION Crimpabmessungen COLOUR Isolations- n Farbe 2177018-1 1.2-2.0 YELLOW 1394511-1 2.0-2.7 WHITE 1823111-1 2.7-3.0 REDBROWN 1394512-1 3.4-3.7 BLUE 1719043-1 4.0-4.5 GREEN gelb weiss rotbraun blau C gruen 7 C-C B-B A-A H2 # 0.3 H E # 0.3 H1= 7.7 H2= 6.6 K = 7.5 D Iso = 5.5 H1 # 0.3 NOTES Bemerkungen 1 LASERWELDED Lasergeschweisst 2 SINGLE WIRE SEAL TO BE SELECTED ACCORDING TO INSULATION- n Auswahl der Einzeldichtung entsprechend dem Isolations- n 3 DIFFERENT FORM AND NUMBER OF THE SERRATIONS POSSIBLE Unterschiedliche Ausfuehrung und Anzahl der Rillen moeglich H = 6.7 4 SILVER PLATED VERSIONS ARE MARKED WITH "Ag" Versilberte Versionen sind mit "Ag" gekennzeichnet D Iso = 3.9 5 DIFFERENT ASSEMBLY CAUSED BY PRODUCTION OF THE SPRING ON THE BODY. SPOTWELDS CAN BE ABOVE OR DOWN. Fertigungsbedingte unterschiedliche Montage der Ueberfeder auf dem moeglich. Body Der Stoss kann sich oben oder unten befinden. 6 USED WITH TAB 0.8 # 0.03mm x 4.8 ... 6.3 # 0.1mm Verwendet mit Flachstecker 0.8 # 0.03mm x 4.8 ... 6.3 so 2-1241408-3 7 H1= 8.15 H2= 7.0 K = 7.9 D Iso = 5.7 DI TIN PLATED verzinnt E = 3.8 4.0 5.9 7.7 19.95 G = 4.8 D Dr = 2.4 o A H1= 8.15 H2= 7.0 K = 7.9 D Iso = 6.0 D Is 1241410-1 8 E = 4.6 4 D Dr 5-1241410-1 0.5-1.0 4.5 6.9 8.7 20.95 G = 5.6 D Dr = 2.9 (K) SILVER PLATED versilbert CuNiSi (K) A 3.4-4.3 (G) 1-1241418-3 4.0-6.0 INSULATION- n 2 A H1= 8.15 H2= 7.0 K = 7.9 D Iso = 6.0 K = 7.0 H = 6.4 K = 6.7 D Iso = 4.0 H = 4.7 VERSION A SILVER PLATED versilbert 2-1241418-3 7 E = 5.3 VERSION C TIN PLATED / SnAg verzinnt / SnAg A 1 5 D Iso = 2.6 H = 3.8 5 K = 4.1 D Iso = 1.8 H = 3.1 K = 3.1 D Iso = 1.4 mm INSULATION CRIMP Isolations Crimp (mm) 5:1 MATERIAL - # 0.1mm "Ag+" MARKING ON SILVER PLATED VERSIONS FOR INCREASED LIMIT TEMPERATURE "Ag+" Markierung auf versilberten Versionen fuer erhoehte Grenztemperatur 8 1241400-1 nicht fuer Neuanwendungen, wird ersetzt durch 5-1241400-1 1241410-1 nicht fuer Neuanwendungen, wird ersetzt durch 5-1241410-1 1241410-3 nicht fuer Neuanwendungen, wird ersetzt durch 5-1241410-3 1241400-1 SUPERSEDED BY PN 5-1241400-1 1241410-1 SUPERSEDED BY PN 5-1241410-1 1241410-3 SUPERSEDED BY PN 5-1241410-3 DWN 03DEC2001 CHK 03DEC2001 APVD 28OCT2011 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: B 7 1 K = 4.9 VERSION B 1241418-4 2 Einzel-Dichtung ORDER NO. A DWN A13 6 min. 1.25 10.3 0.15 B DATE 6.9 0.4 0.03 1.5 D P C B 1.05 0.1 - F # 0.5 C A REVISIONS DIST AI VERSION C 1 0.1 7 8 TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - R. Meier R. Schaefer M. Bleicher TE Connectivity NAME PRODUCT SPEC 108-18718 APPLICATION SPEC 1 $ 114-18388 WEIGHT - Customer Drawing A SIZE AMP MCP6.3/4.8K FLATCONTACT AMP MCP6.3/4.8K Flachkontakt PRODUCT GROUP DRAWING CAGE CODE DRAWING NO A1 00779 RESTRICTED TO 1241438 SCALE 5:1 SHEET 1 OF - 2 A16 REV 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT2013 5 4 3 2 2013 RELEASED FOR PUBLICATION Tyco Electronics AMP GmbH 6 LOC REVISIONS DIST AI ALL RIGHTS RESERVED. 1 - P LTR DESCRIPTION DATE DWN APVD SEE SHEET 1 AMP MCP 6.3/4.8K FOR FUSES AMP MCP 6.3/4.8K fuer Sicherungen F # 0.5 C 0.05 B 4.1 A 10.3 0.15 0.2 D 0.1 B-B A-A H # 0.3 (K) (G) 0.1 6.9 0.4 0.03 1.5 E # 0.3 1.05 0.1 D min. 1.25 o D Is D Dr SPRING / Ueberfeder MATERIAL: X10CrNi18-8 max. 0.3 NOTES Bemerkungen C A16 (0.3) 7 1 2 A16 3 A16 A16 5.75 B 0.1 1 LASERWELDED Lasergeschweisst 2 DIFFERENT FORM AND NUMBER OF THE SERRATIONS POSSIBLE Unterschiedliche Ausfuehrung und Anzahl der Rillen moeglich 3 SILVER PLATED VERSIONS ARE MARKED WITH "Ag" Versilberte Versionen sind mit "Ag" gekennzeichnet 4 DIFFERENT ASSEMBLY CAUSED BY PRODUCTION OF THE SPRING ON THE BODY. SPOTWELDS CAN BE ABOVE OR DOWN. Fertigungsbedingte unterschiedliche Montage der Ueberfeder auf dem moeglich. Body Der Stoss kann sich oben oder unten befinden. 5 USED WITH MEDIUM FUSE 0.64 # 0.04mm x 5.25 # 0.15mm ® ( COMPLIANT WITH ATO FUSE TECHNOLOGY ) ® ATO IS A REGISTERED TRADE MARK OF LITTELFUSE INC. Verwendet mit Medium Sicherung 0.64 # 0.04mm x 5.25 # 0.15mm ® ( kompatibel mit ATO-fuse Technologie ) ® ATO ist ein eingetragener Markenname von Littelfuse Inc. 6 USED WITH MaxiCompact FUSE 0,81 # 0,03mm x 6,3 # 0,2mm MaxiCompact IS A REGISTERED TRADE MARK OF MTA Verwendet mit MaxiCompact Fuse 0.81 # 0.03mm x 6.3 # 0.2mm MaxiCompact ist ein eingetragener Markenname von MTA 7 MaxiCompact FUSE VERSIONS ARE MARKED WITH A SECOND HOLE AT THE SPRING MaxiCompact Fuse Versionen sind mit einem zweiten Loch in der Ueberfeder gekennzeichnet. C 1 4 B 1 A16 A 1-2177995-3 5 A16 1-2333552-3 6 7 A 1-2208461-3 5 A16 1-2333551-3 6 7 A 1-2333550-3 6 1-2208459-3 5 - A A 1-2208460-3 5 A16 A 7 A A - >4.0-6.0 >2.5-4.0 >1.0-2.5 0.5-1.0 ORDER NO. WIRE RANGE STRIP Drahtgroessen Bestell-Nr. Bandware 4805 (3/11) Rev. Bereich (mm²) 4.0-4.3 3.3-4.5 2.2-3.0 1.4-2.1 INSULATIONIsolations- (mm) CuNiSi CuNiSi CuNiSi CuNiSi MATERIAL Werkstoff SILVER PLATED versilbert SILVER PLATED versilbert SILVER PLATED versilbert SILVER PLATED versilbert - SURFACE IN CONTACT AREA Oberflaeche im Kontaktbereich E = 5.3 4.5 6.0 7.8 19.95 G = 5.6 D Dr = 2.9 E = 4.6 4.0 5.2 6.8 19.05 G = 4.8 D Dr = 2.4 E = 3.8 3.5 4.7 6.3 19.05 G = 4.0 D Dr = 1.7 E = 2.8 3.0 A 4.2 B 5.8 19.05 G = 3.0 D Dr = 1.1 C F WIRE CRIMP Drahtcrimp CRIMP DIMENSION Crimpabmessungen 5:1 H = 6.7 K = 7.0 D Iso = 3.9 H = 6.4 K = 6.7 D Iso = 4.0 H = 4.7 K = 4.9 D Iso = 2.6 H = 3.8 K = 4.1 D Iso = 1.8 A DIMENSIONS: mm INSULATION CRIMP Isolations Crimp (mm) 12DEC2013 J. Kirschbaum CHK 13DEC2013 A. Mairoser APVD 13DEC2013 C. Goeppel DWN THIS DRAWING IS A CONTROLLED DOCUMENT. MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - TE Connectivity NAME PRODUCT SPEC 108-94427 APPLICATION SPEC 1 $ 114-18388 WEIGHT - Customer Drawing SIZE AMP MCP6.3/4.8K FLATCONTACT AMP MCP6.3/4.8K Flachkontakt PRODUCT GROUP DRAWING CAGE CODE DRAWING NO A1 00779 RESTRICTED TO 1241438 SCALE 10:1 SHEET 2 OF - 2 A16 REV