2-1416100-7

General Purpose Relays Accessories SCHRACK Accessories Slim Interface Relay SNR n Module width 6.2 mm system width for increased packing density on the DIN rail n DC and AC version n Electrical indicator as standard (LED) n Protection circuit n Screw- or cage clamp terminals n Jumper bars n Reduced F0260-B Approvals VDE Cert. No. 40010063, cULus E224918 Technical data Z ST3F/ST4F Rated voltage/Max. switching voltage AC 240/400 VAC Rated current 6A Dielectric strength coil-contact circuit 4000 Vrms Clearance / creepage coil-contact circuit ≥ 6/8 mm Material group of insulation parts IIIa Insulation to IEC 60664-1 Type of insulation coil-contact circuit reinforced open contact circuit functional Rated insulation voltage 250 V Pollution degree 2 Rated voltage system 230/400 V Overvoltage category III Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature range -20…+55˚C Terminals screw / cage clamp Terminal screw torque acc. IEC 61984 0.5 Nm max. 0.6 Nm Wire cross section single wire 0.14...2.5 mm2 fine wire 0.14...2.5 mm2 with bootlace crimp (DIN 46228/1) 0.14...2.5 mm2 Insertion cycles A (10) Max. Insertion Force total 100 N Mounting distance ≥ 0 mm, dense packing Weight 26 g Packaging unit 10 pcs Sockets Product code ST 3F LC4 DIN-rail socket 24VDC, for relays 12/24/48 VDC, with LED, protection and polarity diode, screw terminals ST 3F SM5 DIN-rail socket 115VAC/VDC with LED and protection circuit, screw terminals ST 3F TP0 DIN-rail socket 230VAC/VDC with LED and protection circuit, screw terminals ST 4F LC4 DIN-rail socket 24VDC, for relays 12/24/48 VDC, with LED, protection and polarity diode, cage clamp terminals ST 4F SM5 DIN-rail socket 115VAC/VDC with LED and protection circuit, cage clamp terminals ST 4F TP0 DIN-rail socket 230VAC/VDC with LED and protection circuit, cage clamp terminals 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company S0487-AA Part Number 2-1416100-0 2-1416100-1 2-1416100-2 2-1416100-3 S0487-AA 2-1416100-4 Version with screw terminals Version with cage clamp terminals 2-1416100-5 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Accessories SCHRACK Accessories Slim Interface Relay SNR (Continued) Accessories Product code ST 36 040 Separation element ST 37 001 Jumper bar, red, 500 mm ST 37 002 Jumper bar, blue, 500 mm ST 37 003 Jumper bar, grey, 500 mm ST 37 040 Marking plate, consisting of 100 marking tabs Part Number 2-1416100-6 2-1416100-7 2-1416100-8 2-1416100-9 4-1416100-0 Relay Packages Complete packages consisting of a relay mounted on a socket: see Relay Package SNR 2 10-2014, Rev. 1014 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.