MICRODOT Microminiature D Connectors
MICRODOT Microminiature D Connectors Introduction
Product Facts
■
Designed for both military
and commercial applications
■
Low engaging force is
achieved by the manner in
which Twist Pin Contacts are
designed
■
The metal shell and plastic
shell are available with
solder cup and solid or
stranded wire terminations
■
Mating force maximum is
10 oz. [2.78N] times the
number of contacts
■
Durability — No known
mechanical or electrical
issues detrimental to the
function of the connectors
after 500 cycles of mating
and unmating
■
Current Rating — 3 amps
max per contact
MICRODOT Connectors
MCK and MCD High Density
Microminiature “D”
Connectors described in
this catalog comprise a
complete connector system,
which is adaptable to
a numerous variety of form
factors. Low engaging force
is achieved by the manner
in which the twist pin
contacts are designed.
By constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle rather
than at a few discrete
points, as in conventional
pin designs. Normal twist
pin engagement force is
6 oz. [1.67N] typically and
8 oz. [2.22N] maximum. The
low force twist pins exhibit
an engaging force of 4 oz.
[1.11N] typically and 5 oz.
[1.39N] maximum.
The MCK and MCD Series
of connectors featured in
this catalog are designed to
meet the applicable requirements of MlL-DTL-83513,
for intermateability,
interchangeability, and
performance. Designed for
both military and commercial applications, the MCK’s
and MCD’s are especially
well suited for use in miniaturized airborne and space
electronics, computers, and
test equipment. The metal
shell MCK’s and plastic
shell MCD’s are available
with solder cup, and solid or
stranded wire terminations.
MCK transition blocks are
standard for printed circuit
board mounting. Custom
termination configurations
for both MCK and MCD
can be accommodated.
Micro D’s are also supplied
in wired harness assemblies.
5-52
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK/MCD/MCDM Series Metal and Plastic Shell Connectors
Technical and Performance Data
(Applicable to MCK, MCD and MCDM unless otherwise noted)
Electrical
Environmental
Contacts — Pin 24 AWG twist pin,
Socket 24 AWG precision machined
barrel or Stamped and Formed 24 AWG
Pin and Socket. Wire Range 24 AWG to
30 AWG solid and stranded.
Temperature Range —
-67°F to 257°F [-55° C to +125°C] for
MCK/MCD, -67°F to 302°F [-55°C to
+150°C] for MCDM.
Contact Resistance — (voltage drop)
25 millivolts max. at 3 amps, 77°± 7.4°F
[25°± 3° C].
Current Rating — 3 amps max. per
contact.
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient.
At sea level 600V
At 70,000 ft. [21,336 m] 150V
Insulation Resistance — 5,000
megohms min. (@ 500 VDC) at ambient
room temperature.
Magnetic Permeability — 2 mu max.
Contact Spacing — .050 [1.27mm]
centers.
Contact Engagement &
Separation — Standard contact
engaging force is 6.0 oz. [1.67N] (8.0 oz.
[2.22N] max.). Separation force is 0.5
[.14N] oz. min.
Mating Force Maximum —
Calculated as 10 oz. times the number
of contacts.
Solderability — Connectors shall
pass the test requirements of MIL-STD202, Method 208
Shock — No discontinuity in excess of
1 µ second when tested in accordance
with EIA-364-27, test condition E.
Durability — No mechanical or electrical defects detrimental to the function of
the connectors after 500 cycles of mating and unmating.
Humidity — After exposure to humidity
as specified EIA-364-31, Method II, IR
shall be 1 megohm minimum following
step 7a of EIA-364-31 section 4.3.6.1
and 1000 megohms minimum after 24
hours of conditioning per EIA-364-31.
Salt Spray — Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subjected to the 48 hour 5% solution salt
spray test per EIA-364-26,Condition B.
Fluid Immersion — Unmated connectors after being fully immersed in one
of the following fluids, for the prescribed
time, will mate at a force of 10 oz.
[2.78N] times the number of contacts
or less: Perchloroethylene, 2 hours;
Insert Retention — Inserts will withstand a 50 lb. [34N/cm2] per square inch
load in either direction.
Crimp Termination Tensile
Strength — (Unassembled contacts
with crimped stranded wire terminations)
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs. [22.24N]; 26 AWG,
4 lbs. [17.79N]; 28 AWG, 3 lbs.
[13.34N]
Outgassing — When tested in accordance with SP-R-0022, Total Mass Loss
(TML) shall be less than 1.0% and
Volatile Condensable Material (VCM)
shall be less than 0.1% of the original
specimen.
Materials and Finishes
Contacts — Copper alloy plated with
.000050 [.00127] gold over copper flash
per MIL-G-45204 Type II.
Hardware — see pages 5-61 and 5-62.
MCK-Metal Shell —
Insulator — Liquid crystal polymer
(LCP) per ASTM D5138, or
Polyphenylene sulfide per ASTM
D4067 or MIL-M-24519
Interfacial Seal — Fluorosilicone Rubber
per MIL-R-25988 (socket side only)
Body Shell — Aluminum alloy-high
grade plated
Cadmium per QQ-P-416
Nickel, electroless per AMS 2404
Transition Block Shell —
Liquid crystal polymer (LCP) per ASTM
D5138, or Polyphenylene sulfide per
ASTM D4067 or MIL-M-24519
Potting Material — Epoxy, Black
MCD-Plastic Shell —
Insulator/Body — Polyester, glass filled
per MIL-M-24519, Liquid crystal
polymer (LCP) per ASTM D5138, or
Polyphenylene sulfide per ASTM
D4067 or MIL-M-24519
Wire Terminations —
Solid copper per QQ-W-343 gold plated
per MIL-DTL-45204
Stranded PTFE insulated per MIL-W16878
Stranded PTFE insulated per MIL-W22759/11, /33
Solid copper per QQ-W-343, solder
dipped (Transition block)
5
Nanominiature and Microminiature Connectors
Mechanical
Vibration — No discontinuity in
excess of 1 µ second when tested in
accordance with EIA-364-28, test
condition IV.
Lubricating oil per MIL-L-23699,
20 hours.
MCDM-Metal Shell —
Insulator — Diallyl Phthalate per MILM-14, Type SDG-F
Body Shell — Aluminum alloy—high
grade, nickel plated
Twist Pin, Pin and Socket
Contacts
The contact spring member
normally found in socket
contacts has been eliminated
by creating a breathing
helical spring principle on
the pin contact — smaller,
more durable contacts
can be manufactured
economically.
Wire range 24-36 AWG solid & stranded.
MIL-DTL-83513 — Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations;
MIL-DTL-83513/1 through /4 — MCKS metal shell; MIL-DTL-83513/6 through /9 — MCD plastic shell.
In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and
stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for
MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6
through /9 specify no hardware (B). Mounting/mating hardware is shown on page 5-61 with the applicable military
nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed
to include the desired hardware.
See pages 5-78 through 5-82 for M83513/ cross reference.
5-53
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT How To Specify MCK and MCD Connectors
Metal Shell
S — Solder pots 26 AWG max.
X — Special, not described by legend.
MCK
N1
B
37
P
6
A
1
Connector Series
MCK — Twist Pin & Drawn Socket
MCKS — Stamp & Formed Pin & Socket
18.0
Lead Length in Inches (Min.)
Insulation Color or Finish
1 — All white wire
6 — Bare (unfinished)
2 — All yellow wire
7 — Color coded per MIL-STD-681, System 1
8 — Special color code
3 — All gray wire
4 — Gold plated
9 — 10 Solid color repeating per MIL-DTL-83513
5 — Tin dipped gold plated
Shell Finish
C1 — Cadmium, Clear
C2 — Cadmium, Yellow Chromate
N1 — Nickel, Electroless
Wire Type
Hardware (See Pages 5-79 and 5-80)
B
F
KM
HM
LM
JM
QM
TM
RM
NM
P
S
X
Y
Z
— No Hardware
— Float Bushing
— Jackscrew, Slotted Head, High Profile (9-51)
— Jackscrew, Slotted Head, High Profile (100)
— Jackscrew, Slotted Head, Low Profile (9-51)
— Jackscrew, Slotted Head, Low Profile (100)
— Jackscrew, Allen Head, High Profile (9-51)
— Jackscrew, Allen Head, High Profile (100)
— Jackscrew, Allen Head, Low Profile (9-51)
— Jackscrew, Allen Head, Low Profile (100)
— Jackpost Assembly (9-51)
— Jackpost Assembly (100)
— Lockscrew, Slotted Head
— Lockscrew, Allen Head
— Clip and Key (Clip Mount Only)
Per MIL-W-16878
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
(26 AWG only), 24 AWG
L — Copper, Solid
(25 AWG only)
Q — Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Layout
9, 15, 21, 25, 31, 37, 51, 100
See contact arrangement
Contact Type
P — Pin (Plug)
S — Socket (Receptacle)
S — Solder pots 26 AWG max.
X — Special — Does not fit description below.
Plastic Shell
MCD
R3
B
37
P
6
A
1
Connector Series
18.0
Lead Length in Inches (Min.)
Insulator Type/Material
Insulation Color or Finish
G2 — Clip Mount, polyester, natural
G3 — Screw Mount, polyester, natural, .093 Flg.
R2 — Clip Mount, Ryton
R3 — Screw Mount, Liquid Crystal Polymer
or Polyphenylene Sulfide
1 — All white wire
6 — Bare (unfinished)
2 — All yellow wire
7 — Color coded per MIL-STD-681, System 1
3 — All gray wire
8 — Special color code
4 — Gold plated
9 — 10 Solid color repeating per MIL-DTL-83513
5 — Tin dipped gold plated
Wire Type
Hardware (See Pages 5-79 and 5-80)
B
F
KM
LM
QM
RM
P
X
Y
Z
— No Hardware
— Float Bushing
— Jackscrew, Slotted Head, High Profile
— Jackscrew, Slotted Head, Low Profile
— Jackscrew, Allen Head, High Profile
— Jackscrew, Allen Head, Low Profile
— Jackpost Assembly
— Lockscrew, Slotted Head
— Lockscrew, Allen Head
— Clip and Key (Clip Mount Only)
Per MIL-W-16878
{
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
(26 AWG only), 24 AWG
L — Copper, Solid
(25 AWG only)
Q — Stranded per MIL-W-22759/33
(26 AWG only)
Layout
Wire Size
9, 15, 21, 25, 31, 37, 51
See contact arrangement
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Contact Type
P — Pin (Plug)
S — Socket (Receptacle)
Note: Items in bold italic are qualified to MIL-DTL-83513.
5-54
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT Contact Arrangements
Face View of Pin Insert
(Socket Side is Mirror Image)
1
1
5
9
6
9
12
15
15 Contacts
9 Contacts
11
1
8
1
8
9
15
23
13
1
1
16
14
25
25 Contacts
21
21 Contacts
16
17
24
30 Contacts
(MCDM Only)
31
31 Contacts
30
1
19
20
37
37 Contacts
5
18
19
Nanominiature and Microminiature Connectors
1
35
36
51 Contacts
51
26
1
27
51
75
52
100
76
100 Contacts
(MCK Only)
Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal
Shell on pages 5-72 and 5-73 with MCD Series Plastic Shell on page 5-58.
5-55
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Series Metal Shell Connectors
Dimensions per
MIL-DTL-83513
Two Mtg. Holes
Ø.092±.004 (9-51)
[2.34±0.10]
F
Contact #1
Ø.145 – .150 (100)
[3.68 – 3.81]
Pin
E
A
.183±.003
[4.65±0.08]
B
.406±.010
[10.31±0.25]
Pin
Pin
.093±.005
[2.36±0.13]
Plug
(Pin side)
C
D
F
Contact #1
Two Mtg. Holes
Ø.092±.004 (9-51)
[2.34±0.10]
Socket
Ø.145 – .150(100)
[3.68 – 3.81]
E
A
.195±.003
[4.95±0.08]
B
Receptacle
(Socket side)
.419±.010
[10.64±0.25]
Socket
Socket
.093±.005
[2.36±0.13]
D
C
Part
Number
A
± .010 [.254]
MCK**- 9P***
.775
19.68
.775
19.68
.925
23.50
.925
23.50
1.075
27.30
1.075
27.30
1.175
29.84
1.175
29.84
1.325
33.66
1.325
33.66
1.475
37.46
1.475
37.46
1.425
36.20
1.425
36.20
2.160
54.86
2.160
54.86
MCK**- 9S***
MCK**- 15P***
MCK**- 15S***
MCK**- 21P***
MCK**- 21S***
MCK**- 25P***
MCK**- 25S***
MCK**- 31P***
MCK**- 31S***
MCK**- 37P***
MCK**- 37S***
MCK**- 51P***
MCK**- 51S***
MCK**- 100P***
MCK**- 100S***
B Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
18.05
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
C
+.010 [.254]
-.018 [.457]
.390
9.91
.390
9.91
.540
13.72
.540
13.72
.690
17.53
.690
17.53
.790
20.07
.790
20.07
.940
23.88
.940
23.88
1.090
27.69
1.090
27.69
1.040
26.42
1.040
26.42
1.432
36.37
1.432
36.37
D Max
E
±.010 [.254]
F
± 005 [.127]
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.310
7.87
.310
7.87
.360
9.15
.360
9.15
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.298
7.57
.341
8.66
.341
8.66
.384
9.75
.384
9.75
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.71
1.800
45.71
P = Pin, S = Socket
5-56
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
Panel Mounting
Dimensions — MCK
.395
[10.03]
.200
[5.08]
Plug and Receptacle
Rear Mounted
.300
[7.62]
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Panel Cutout Dimensions — MCK
.095
[2.41]
C
Full Radius
(Typ.)
9-51
Figure 1
Front Mounting
Number
of
Contacts
Fig.
1
C
Full Radius
(Typ.)
A
9-51
9
2
1
B
15
R
.005
.101 +– .000
4 Plcs.
+ .127
[2.56 – .000 ]
2
116 Typ.
1
Figure 2
Rear Mounting
21
1.810/1.805
[45.98/45.85]
25
2
1
.122
[3.10]
2
1
100
Full Radius
(Typ.)
1.448 .002
[36.83/36.73]
.369/.364
[9.37/9.24]
R .015 Max.
[.381] Typ.
31
2
1
37
2
Front Mounting
1
51
2
.122
[3.10]
1.810/1.805
[45.98/45.85]
100
Full Radius
(Typ.)
Nanominiature and Microminiature Connectors
.015 Max.
R
[.381] Typ.
A
.095
[2.41]
5
B
1.514 .002
[38.51/38.40]
A
+ .004 [.102]
– .000 [.000]
.404
10.26
.406
10.31
.554
14.07
.556
14.12
.704
17.88
.706
17.93
.804
20.42
.806
20.47
.954
24.23
.956
24.28
1.104
28.04
1.106
28.09
1.054
26.77
1.056
26.82
B
+ .004 [.102]
– .000 [.000]
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.274
6.96
.257
6.53
.314
7.98
.300
7.62
C
+ .005 [.127]
– .000 [.000]
.570
14.48
.570
14.48
.720
18.29
.720
18.29
.870
22.10
.870
22.10
.970
24.64
.970
24.64
1.120
28.45
1.120
28.45
1.270
32.26
1.270
32.26
1.220
30.99
1.220
30.99
.403/.398
[10.24/10.11]
R .055 Max.
[1.40] Typ.
Rear Mounting
5-57
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCD Series Plastic Shell Connectors
Screw Mount
Dimensions Per
MIL-DTL-83513
F
Contact #1
Two Mtg. Holes
Ø.092±.004
[2.34±.10]
Pin
E
A
B
.395/.360
[10.03/9.14]
.199±.005
[5.05±.13]
Pin
Pin
.094±.006
[2.39±0.15]
D
C
Plug
(Pin side)
F
Contact #1
Two Mtg. Holes
Ø.092±.004
[2.34±0.10]
Socket
E
A
B
Receptacle
(Socket side)
.375/.340
[9.52/8.64]
.180±.005
[4.57±0.13]
Socket
Socket
.094±.006
[2.39±0.15]
Liquid Crystal Polymer or
Polyphenylene Sulfide — MCDR3* per
MIL-DTL-83513
D
C
Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 5-72 and 5-73).
Part
Number
A
± .010 [.254]
B Max.
MCD**- 9P***
.778
19.76
.778
19.76
.928
23.57
.928
23.57
1.078
27.38
1.078
27.38
1.178
29.92
1.178
29.92
1.328
33.73
1.328
33.73
1.478
37.54
1.478
37.54
1.428
36.27
1.428
36.27
.2918
7.412
.3798
9.647
.4418
11.222
.5298
13.457
.5918
15.032
.6798
17.267
.6918
17.572
.7798
19.807
.8418
21.382
.9298
23.617
.9918
25.192
1.0798
27.427
.9418
23.922
1.0298
26.157
MCD**- 9S***
MCD**- 15P***
MCD**- 15S***
MCD**- 21P***
MCD**- 21S***
MCD**- 25P***
MCD**- 25S***
MCD**- 31P***
MCD**- 31S***
MCD**- 37P***
MCD**- 37S***
MCD**- 51P***
MCD**- 51S***
C
+.010 [.254]
-.018 [.457]
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.948
24.08
.948
24.08
1.098
27.89
1.098
27.89
1.048
26.62
1.048
26.62
D Max
E
±.010 [.254]
F
± 005 [.127]
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.173
4.39
.220
5.59
.220
5.59
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
Avg. Weight
lbs. ± 5%
[grams]
.0017
0.77
.0016
0.72
.0024
1.08
.0023
1.04
.0035
1.59
.0034
1.54
.0042
1.90
.0037
1.67
.0053
2.40
.0048
2.17
.0057
2.58
.0051
2.31
.0072
3.26
.0063
2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 5-54.
5-58
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCD Series Plastic Shell Connectors (Continued)
.019
[.483]
Clip Mount — MCD
.093 .003
[2.44/2.29]
Contact #1
Pin
E
A
.199
[5.05]
B
.395/.360
[10.03/9.14]
Pin
Pin
.060
[1.52]
Plug
(Pin side)
D
C
.093 .003
[2.44/2.29]
.019
[.483]
Contact #1
Socket
E
5
A
.375/.340
[9.52/8.64]
Receptacle
(Socket side)
Socket
Socket
.060
[1.52]
Note: Clip Mount not covered by
current issue of MIL-DTL-83513.
D
C
Part
Number
A
±.005 [.127]
B Max.
C
±.010 [.254]
D
±.010 [.254]
E
±.005 [.127]
MCD**- 9P***
MCD**- 51P***
.506
12.85
.506
12.85
.656
16.66
.656
16.66
.806
20.47
.806
20.47
.906
23.01
.906
23.01
1.056
26.82
1.056
26.82
1.206
30.63
1.206
30.63
1.156
29.36
.2918
74.12
.3798
96.47
.4418
112.22
.5298
134.57
.5918
150.32
.6798
172.67
.6918
175.72
.7798
198.07
.8418
213.82
.9298
236.17
.9918
251.92
1.0798
274.27
.9418
239.22
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.948
24.08
.948
24.08
1.098
27.89
1.098
27.89
1.048
26.62
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
Avg. Weight
lbs. ± 5%
[grams]
.0017
0.77
.0016
0.72
.0024
1.08
.0023
1.04
.0035
1.59
.0034
1.54
.0042
1.90
.0037
1.67
.0053
2.40
.0048
2.17
.0057
2.58
.0051
2.31
.0072
3.26
MCD**- 51S***
1.156
29.36
1.0298
261.57
1.048
26.62
.208
5.28
.250
6.35
.0063
2.85
MCD**- 9S***
MCD**- 15P***
MCD**- 15S***
MCD**- 21P***
MCD**- 21S***
MCD**- 25P***
MCD**- 25S***
MCD**- 31P***
MCD**- 31S***
MCD**- 37P***
MCD**- 37S***
Nanominiature and Microminiature Connectors
.180
[4.57]
B
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 5-54.
5-59
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions
Panel Mounting Dimensions — MCD
Clip Mount
Screw Mount
.200±.005
[5.08±0.13]
.200±.005
[5.08±0.13]
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Rear Mounted
.395±.005
[10.03±0.13]
.330±.005
[8.38±0.13]
Plug and Receptacle
Front Mounted
Plug and Receptacle
Front Mounted
.300±.005
[7.62±0.13]
.265±.005
[6.73±0.13]
Plug Front Mounted
Receptacle Rear Mounted
Plug Front Mounted
Receptacle Rear Mounted
Panel Cutout Dimensions — MCD
Clip Mounting
Number
of
Contacts
Screw Mounting
9
.089
A
B
[2.26
+ .005
– .000
+ 0.13
– 0.00 ]
C
B
R .015 Max.
[.381] Typ.
A
Full
Radius
(Typ.)
Front
15
Front
Figure 1
R .015
[.381]
Max. Typ.
21
Figure 2
25
C
A
B
.089
[2.26]
A
B
R .015 Max.
[.381] Typ.
Full
Radius
(Typ.)
.005
.075 +– .000
R
+ 0.13
[1.90 – 0.00 ]
Rear
Rear
Figure 3
Figure 4
31
116 Typ.
37
51
Notes: Front mounting preferred.
Fig.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
A
+ .004 [.102]
– .000 [.000]
.438 [11.13]
.412 [10.46]
.438 [11.13]
.384 [9.75]
.588 [14.93]
.562 [14.27]
.588 [14.93]
.534 [13.56]
.738 [18.75]
.712 [18.08]
.738 [18.75]
.684 [17.37]
.838 [21.29]
.812 [20.62]
.838 [21.29]
.784 [19.91]
.988 [25.10]
.962 [24.43]
.988 [25.10]
.934 [23.72]
1.138 [28.91]
1.112 [28.24]
1.138 [28.91]
1.084 [27.53]
1.088 [27.64]
1.062 [26.97]
1.088 [27.64]
1.034 [26.26]
B
+ .004 [.102]
– .000 [.000]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.177 [4.50]
.177 [4.50]
.222 [5.64]
.222 [5.64]
.224 [5.69]
.224 [5.69]
.264 [6.71]
.264 [6.71]
C
+ .005 [.127]
– .000 [.000]
—
.570 [14.48]
—
.570 [14.48]
—
.720 [18.29]
—
.720 [18.29]
—
.870 [22.10]
—
.870 [22.10]
—
.970 [24.64]
—
.970 [24.64]
—
1.120 [28.45]
—
1.120 [28.45]
—
1.270 [32.26]
—
1.270 [32.26]
—
1.220 [30.99]
—
1.220 [30.99]
5-60
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT Mounting and Coupling Hardware
For Screw Mount MCK,
MCKS, MCD and MCDM
9-51 Contacts
Slot Head
(KM)
(LM)
(P)
Ø .156 Max.
[3.96] Over Knurl
Jackscrew
Retaining
Ring
.600
[15.24]
Ø .125
[3.18]
.098
[2.29]
Jackscrew
.853 ± .015
[21.67 ± 0.38]
.125 Hex.
[3.18]
.086-56UNC-2B
[2.18]
Bushing
.340–.360
[8.64–9.14]
Retaining
Ring
Lockwasher
Hex Nut
2-56UNC-2A
2-56UNC-2A
.187
[4.75]
.475
[12.07]
2-56UNC-2A
Part Number 5-1532137-8
Jackscrew Assembly
High Profile
M83513/5-06
(KM) S96-0002-0084
9-51 Contacts
1/16" Allen Head
(QM)
Part Number 5-1532137-7
Jackscrew Assembly
Low Profile
M83513/5-05
(LM) S96-0002-0085
(RM)
Ø .156 Max.
[3.96] Over Knurl
Jackscrew
.600
[15.24]
Ø .125
[3.18]
2-56UNC-2A
(HM)
Part Number 5-1532137-5
Jackscrew Assembly
Low Profile
M83513/5-02
(RM) S96-0002-0087
(JM)
Ø .200 Max.
[3.96] Over Knurl
Jackscrew
.585
[14.86]
Ø .187
[4.75]
Retaining
Ring
.100
[2.54]
.415 Max.
[10.54]
4-40UNC-2A
Part Number 6-1532137-3
Jackscrew Assembly
High Profile
M83513/5-16
(HM) S96-0002-0088
(TM)
Part Number 6-1532137-2
Jackscrew Assembly
Low Profile
M83513/5-15
(JM) S96-0002-0089
(NM)
Ø .200 Max.
[3.96] Over Knurl
Jackscrew
Retaining
Ring
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness
panel.
2. Letter(s) in parentheses is to assist
in ordering hardware with the connector (See “How To Specify”
page 5-54).
3. Items in bold italic are qualified to
MIL-DTL-83513.
4. Mounting torque values and
mating torque values are per
MIL-DTL-83513/5.
Jackscrew
.920 Max.
[23.37]
4-40UNC-2A
100 Contacts
1/16" Allen Head
.340–.360
[8.64–9.14]
Retaining
Ring
Part Number 5-1532137-6
Jackscrew Assembly
High Profile
M83513/5-03
(QM) S96-0002-0086
Retaining
Ring
5
Jackscrew
.853 ± .015
[21.67 ± 0.38]
2-56UNC-2A
100 Contacts
Slot Head
.098
[2.29]
Nanominiature and Microminiature Connectors
Retaining
Ring
Part Number 5-1532137-9
Jackpost Assembly
(P) S96-0002-0009
M83513/5-07
P mates with KM, LM, QM and RM
Jackscrew Assemblies.
.585
[14.86]
(S)
Ø .187
[4.75]
.100
[2.54]
Jackscrew
.920 Max.
[23.37]
Retaining
Ring
.415 Max.
[10.54]
4-40UNC-2A
4-40UNC-2A
.187 Hex.
[4.75]
.112-40UNC-2B
[2.84]
Bushing
Lockwasher
Hex Nut
.185 Max.
[4.70]
.475
[12.07]
4-40UNC-2A
Part Number 6-1532137-1
Jackscrew Assembly
High Profile
M83513/5-13
(TM) S96-0002-0090
Part Number 6-1532137-0
Jackscrew Assembly
Low Profile
M83513/5-12
(NM) S96-0002-0091
Part Number 6-1532137-4
Jackpost Assembly
(S) S96-0002-0060
M83513/5-17
S mates with HM, JM, TM and NM
Jackscrew Assemblies.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
5-61
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
MICRODOT Microminiature D Connectors
MICRODOT Mounting and Coupling Hardware (Continued)
For Screw Mount MCK,
MCD and MCDM (Continued)
Slot Head
1/16" Allen Head
(X)
(Y)
Ø .125
[3.18]
Ø .125
[3.18]
.075
[1.91]
Lockscrew
Lockscrew
Retaining Clip
Retaining Clip
2-56UNC-2A
2-56UNC-2A
Part Number 4-1532137-3
Lockscrew Assembly
096-0002-0008
For Clip Mount — MCD
.075
[1.91]
.343 ± .010
[8.71 ± 0.25]
Part Number 1495164-1
Lockscrew Assembly
096-0002-0013
(Z)
.600
[15.24]
.356
[9.04]
Part Number 1466018-1
Mounting Key and Clip
P/N 096-0001-0000
(2 Required)
For Float Mount — MCK,
MCD and MCDM
(F)
Washer
Bushing
Float Mount Bushing
(Factory Installed)
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel.
2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See “How To Specify” page 5-54).
3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half.
5-62
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks
RT1 — Right-Angle
Termination Configuration
A
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
B
C
D
MIL-DTL-83513/10 through /15
configurations. 90° — Narrow Profile
termination configurations.
See pages 5-78 to 5-82 for M83513
cross references.
Mounting Surface
Contact #1
(Pin Connectors)
Contact #1
(Socket Connectors)
.109 ±.015
[2.77 ±0.39]
.190 Max.
.185 Max.
[4.83] (Sizes 9-51) [4.70] (Size 100 only)
F
F
E
G
Mounting Surface
.096±.003 Dia.
[2.44±0.08] Typ.
N1
P
37
P
H
31, 37, 51 & 100 Contacts
.125±.003 Dia.
[3.18±0 .08] Typ.
(Size 100 Only)
Nanominiature and Microminiature Connectors
MCK
5
.096±.003 Dia.
[2.44±0 .08] Typ.
Mounting
Surface
9, 15, 21 & 25 Contacts
How To Specify
G
E
RT1
Right Angle Termination (Solder Dipped)
RT1 — w/ .109 Leads
RT1A — w/ .140 Leads
RT1B — w/ .172 Leads
Contact Type
S = STD Socket
P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B = No Hardware
S = Jackpost (100)
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See page 87)
Notes:
1. For terminal identification see page 5-65.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for RT1.
4. Items in bold italic are qualified to MIL-DTL-83513.
5-63
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks (Continued)
RT1 — Right-Angle
Termination Configuration
(Continued)
Part Number
MCK-**- *- 9PRT1
MCK-**- *- 9SRT1
MCK-**- *- 15PRT1
MCK-**- *- 15SRT1
MCK-**- *- 21PRT1
MCK-**- *- 21SRT1
MCK-**- *- 25PRT1
MCK-**- *- 25SRT1
MCK-**- *- 31PRT1
MCK-**- *- 31SRT1
MCK-**- *- 37PRT1
MCK-**- *- 37SRT1
MCK-**- *- 51PRT1
MCK-**- *- 51SRT1
MCK-**- *- 100PRT1
MCK-**- *- 100SRT1
A
Max.
.787
19.99
.787
19.99
.937
23.80
.937
23.80
1.087
27.61
1.087
27.61
1.187
30.15
1.187
30.15
1.337
33.96
1.337
33.96
1.487
37.77
1.487
37.77
1.435
36.45
1.435
36.45
2.175
55.25
2.175
55.25
B
± 005 [.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
C
Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
17.83
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
D
Max.
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.351
8.92
.351
8.92
.394
10.01
.394
10.01
E
Max.
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.525
13.34
.525
13.34
.525
13.34
.525
13.34
.660
16.76
.660
16.76
1.010
25.65
1.010
25.65
F
+.010 [.254]
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.300
7.62
.300
7.62
.400
10.16
.400
10.16
G
+.010 [.254]
.230
5.84
.230
5.84
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.150
3.81
.150
3.81
.200
5.08
.200
5.08
H
Max.
—
—
—
—
—
—
—
—
1.090
27.69
1.090
27.69
1.190
30.23
1.190
30.23
1.230
31.24
1.230
31.24
1.825
46.36
1.825
46.36
P = Pin, S = Socket
Note: Items in bold italic are qualified to MIL-DTL-83513.
5-64
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks (Continued)
RT1 — Right-Angle
Termination Configuration
(Continued)
View is of termination side of plug
connector. For receptacle, use mirror
image. (Except 100 contacts)
5
Nanominiature and Microminiature Connectors
5-65
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks (Continued)
ST1 — Straight
Termination Configuration
Contact #1
(Pin Connector)
Contact #1
(Socket Connector)
A
B
.096±.003 Dia. Typ.
[2.44±.076] (For Size 9 Thru 51)
.125±.003 Dia. Typ.
[3.18±.076] (For Size 100 Only)
F
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
C
MIL-DTL-83513/22 through /27
configurations. 180° — Narrow Profile
termination configurations.
See pages 5-78 to 5-82 for M83513
cross references.
.190 Max. (Sizes 9-51)
[4.83]
D
.185 Max. (Size100 only)
[4.70]
.355
Max.
[9.02]
(Sizes 9-51)
E
.550
Max.
[13.97]
(Size100 only)
.165
Max. (Sizes 9-51) .303 Max. (Size 100 only)
[4.20]
[7.70]
.109 ±.015
[2.77 ±0.39]
(Lead Length For ST1 Shown)
.100
Typ.
[2.54]
.050
Typ.
[1.27]
Lead #1
(Socket Connector)
Lead #1
(Pin Connector)
How To Specify
MCK
N1
P
37
P
ST1
Straight Termination (Solder Dipped)
ST1 — w/ .109 Leads
ST1A — w/ .140 Leads
ST1B — w/ .172 Leads
Contact Type
S = STD Socket
P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B = No Hardware
S = Jackpost (100)
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See page 87)
Notes:
1. For terminal identification see page 5-81.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for ST1.
4. Items in bold italic are qualified to MIL-DTL-83513.
5-66
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks (Continued)
ST1 — Straight Termination
Configuration (Continued)
Part Number
MCK-**- *- 9PST1
MCK-**- *- 9SST1
MCK-**- *- 15PST1
MCK-**- *- 15SST1
MCK-**- *- 21PST1
MCK-**- *- 21SST1
MCK-**- *- 25PST1
MCK-**- *- 25SST1
MCK-**- *- 31PST1
MCK-**- *- 31SST1
MCK-**- *- 37SST1
MCK-**- *- 51PST1
MCK-**- *- 51SST1
MCK-**- *- 100PST1
MCK-**- *- 100SST1
B
± .007 [.178]
1.150
29.21
1.150
29.21
1.150
29.21
1.150
29.21
1.450
36.83
1.450
36.83
1.500
38.10
1.500
38.10
1.800
45.72
1.800
45.72
2.100
53.34
2.100
53.34
2.000
50.80
2.000
50.80
2.800
71.12
2.800
71.12
C
± .005 [.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
D
Max.
.885
22.48
.885
22.48
.945
24.00
.945
24.00
1.185
30.10
1.185
30.10
1.275
32.39
1.275
32.39
1.575
40.01
1.575
40.01
1.875
47.63
1.875
47.63
1.775
45.09
1.775
45.09
2.585
65.66
2.585
65.66
E
Max.
.3338
8.48
.4018
10.21
.4838
12.29
.5518
14.02
.6338
16.10
.7018
17.83
.7338
18.64
.8018
20.37
.8838
22.45
.9518
24.18
1.0338
26.26
1.1018
27.99
.9838
24.99
1.0518
26.72
1.3838
35.15
1.508
38.30
F
Max.
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.308
7.83
.351
8.92
.351
8.92
.460
11.68
.460
11.68
5
Nanominiature and Microminiature Connectors
MCK-**- *- 37PST1
A
Max.
1.390
35.31
1.390
35.31
1.390
35.31
1.390
35.31
1.690
42.93
1.690
42.93
1.740
44.20
1.740
44.20
2.040
51.82
2.040
51.82
2.340
59.44
2.340
59.44
2.270
57.66
2.280
57.91
3.250
82.55
3.250
82.55
P = Pin, S = Socket
Note: Items in bold italic are qualified to MIL-DTL-83513.
5-67
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK Transition Blocks (Continued)
ST1 — Straight Termination
Configuration (Continued)
View is of termination side of plug
connector. For receptacle, use mirror
image.
5-68
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK ST2 Series Straight Mount PCB Connectors
MCK with Cactus Bend
Termination
.308
Max.
[7.83]
A
Pin
2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
Contact #1
C
B
.190
Max.
[4.83]
■
Meets MIL-DTL-83513
Performance requirements
■
Single metal shell with no
Transition Block
■
Low profile and light weight
■
.100 [2.54] x .075 [1.91]
grid pattern
■
Design allows lower cost
construction
.182 ±.004
[4.62 ±0.10]
.400
Max. .109 Min.
[10.16]
[2.76]
Pin
2-56 Thd.
Studs. Opt.
.210 ±.02
[5.33 ±0.5]
Hardware omitted
for clairity
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
.225
Ref.
[5.72]
.075
Typ.
[1.91]
Metal Mounting
Surface
.050
Typ.
[1.27]
.308
Max.
[7.83]
.075
Typ.
[1.91]
5
.038
Typ.
[0.97]
Nanominiature and Microminiature Connectors
.100
Typ.
[2.54]
.025
Typ.
[0.64]
A
Socket
2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
Contact #1
C
B
.190
Max.
[4.83]
.195 ±.003
[4.95 ±0.08]
.400
Max. .109
[10.16]
Min.
[2.76]
Socket
2-56 Thd.
Studs. Opt.
.210 ±.02
[5.33 ±0.5]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
.225
Ref.
[5.72]
Hardware omitted
for clairity
.075
Typ.
[1.91]
.100
Typ.
[2.54]
Metal Mounting
Surface
.050
Typ.
[1.27]
.075
Typ.
[1.91]
.038
Typ.
[0.97]
.025
Typ.
[0.64]
5-69
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK ST2 Series Straight Mount PCB Connectors (Continued)
A
Max.
.785
19.94
.785
19.94
.935
23.75
.935
23.75
1.085
27.56
1.085
27.56
1.185
30.10
1.185
30.10
1.335
33.91
1.335
33.91
1.485
37.72
1.485
37.72
Part Number
MCK-**-*- 9 PST2
MCK-**-*- 9 SST2
MCK-**-*- 15 PST2
MCK-**-*- 15 SST2
MCK-**-*- 21 PST2
MCK-**-*- 21 SST2
MCK-**-*- 25 PST2
MCK-**-*- 25 SST2
MCK-**-*- 31 PST2
MCK-**-*- 31 SST2
MCK-**-*- 37 PST2
MCK-**-*- 37 SST2
How To Specify
MCK
N1
P
37
P
B ± .005
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
C
Max.
.333
8.46
.402
10.21
.483
12.27
.552
14.02
.633
16.08
.702
17.83
.733
18.62
.802
20.37
.883
22.43
.952
24.18
1.033
26.24
1.102
27.99
ST2
Straight Termination
Contact Type
S = Standard Socket
P = Standard Pin
Layout
9, 15, 21, 25, 31, 37
Hardware
P = Jackpost (2-56 THD)
B = No Hardware
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See Page 5-56)
5-70
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCK ST2 Series Straight Mount PCB Connectors (Continued)
5
Nanominiature and Microminiature Connectors
5-71
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell Connectors
Technical & Performance
Data
Performance
Contact Resistance — The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard #24 solid copper leads
when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots — 600 VAC at sea level;
150 VAC at 70,000 feet [21,336 m].
Wire Terminations — 750 VAC at sea
level; 200 VAC at 70,000 feet [21,336m]
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) — No
discontinuity in excess of 1 microsecond
during twelve 20 minute sweeps from 10
to 2,000 CPS at .06 double amplitude or
20 G forces, whichever is less.
Corrosion Resistance (Per
MIL-STD-202C, Method 101B,
Condition B) — Both mated and
unmated samples do not exceed the
maximum allowable contact resistance
(8 milliohms) when subjected to the
48 hour salt spray test.
Durability — The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance —
Greater than 5,000 megohms at room
temperature for the materials listed
under “Materials”.
Maximum Current Carrying
Capacity — No. 24 contact, 3
amperes. It must be recognized,
however, that all the wires to a connector
will not carry their maximum current
under all environmental conditions due
to wire temperature.
Contact Engaging and Separation
Forces — 6 oz. [1.67N] maximum
(eng.); 0.5 oz. [.14N] minimum (sep.).
Temperature Range (Operating) —
Diallyl phthalate -67°F to 257°F
[-55°C to +125°C].
Materials
Insulator — Diallyl phthalate per
MIL-M-14, Type SDG-F, Liquid Crystal
Polymer (LCP) per ASTM D5138, or
RYTON per ASTM D4067.
Contacts —
Pin Contact — Copper alloy and
beryllium copper alloy make up the
complete construction.
Socket Contact — Copper alloy.
Body Shell — High grade aluminum
alloy.
Finishes
Contacts — Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shell — Electroless nickel per
AMS 2404.
Note:
Insulators are molded into their metal
shells — No bonded joint is used.
Screw Mount
A
F
Contact #1
E
.193
[4.90]
.089–.094 Dia.
[2.26–2.39] 2 Plcs.
Pin
B
.093
[2.36]
The only metal shell connector that mates with all
existing plastic types. This
line is ideal for external use
and other applications
requiring frequent disconnect and remating. When
durability and reliability are
paramount the metal shell
connector is unsurpassed —
it eliminates the need for
retrofitting where new metal
shell varieties must mate
with older plastic types.
Originally designed for military applications, they are
currently used for commercial requirements, including
computers.
.379
[9.63]
Pin
Pin
D
C
A
F
Contact #1
E
.180
[4.57]
.089–.094
Dia.
[2.26–2.39]
Socket
B
.093
[2.36]
.365
[9.27]
Socket
Socket
.798
[20.27]
D
RYTON is a trademark of Chevron
Chemical Company LLC.
5-72
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell Connectors (Continued)
Screw Mount (Continued)
How To Specify
S — Solder pot for #26 max. stranded wire
X — Special, does not fit description below.
MCD
M1
B
37
P
6
A
1
18.0
Lead Length in Inches (min.)
Connector Series
Shell Type and Material
Insulation Color or Finish
M1 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
1 — All white wire
2 — All yellow wire
3 — All gray wire
Hardware (See Pages 5-79 and 5-80)
B
F
KM
LM
QM
RM
P
X
Y
Z
4 — Gold plated
5 — Tin dipped gold plated
6 — Bare (unfinished)
7 — Color coded per MIL-STD-681,
System 1
8 — Special color code
9 — 10 color repeating (solid) per M83513
Wire Type
— No Hardware
— Float Bushing
— Jackscrew, Slotted Head, High Profile
— Jackscrew, Slotted Head, Low Profile
— Jackscrew, Allen Head, High Profile
— Jackscrew, Allen Head, Low Profile
— Jackpost Assembly
— Lockscrew, Slotted Head
— Lockscrew, Allen Head
— Clip and Key (Clip Mount Only)
*A — Type E, 7 strand
*B — Type ET, 7 strand
*C — Type E, 19 strand
*D — Type ET, 19 strand
F — 7 strand per MIL 22759/11
(#28 AWG only)
G — 19 strand per MIL-22759/11
#26 AWG, #24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
5
Wire Size
4 — #24
5 — #25
6 — #26
8 — #28
0 — #30
Contact Type
Nanominiature and Microminiature Connectors
P — Pin
S — Socket
Layout
9, 15, 21, 25, 30, 31, 37, 51
Part Number
MCDM1-9P***
MCDM1-9S***
MCDM1-15P***
MCDM1-15S***
MCDM1-21P***
MCDM1-21S***
MCDM1-25P***
MCDM1-25S***
MCDM1-30P***
MCDM1-30S***
MCDM1-31P***
MCDM1-31S***
MCDM1-37P***
MCDM1-37S***
MCDM1-51P***
MCDM1-51S***
A
± .005
[±.127]
.780
19.81
.780
19.81
.930
23.62
.930
23.62
1.080
27.43
1.080
27.43
1.180
29.97
1.180
29.97
.930
23.62
.930
23.62
1.330
33.78
1.330
33.78
1.480
37.59
1.480
37.59
1.430
36.32
1.430
36.32
B
± .005
[±.127]
.290
7.36
.365
9.27
.440
11.18
.515
13.08
.590
14.99
.665
16.89
.690
17.53
.765
19.43
.435
11.05
.515
13.08
.840
21.34
.915
23.24
.990
25.15
1.065
27.05
.940
23.88
1.015
25.78
C
± .010
[±.254]
.398
10.11
.398
10.11
.548
13.92
.548
13.92
.698
17.73
.698
17.73
.798
20.27
.798
20.27
.548
13.92
.548
13.92
.948
16.46
.948
16.46
1.098
27.89
1.098
27.89
1.048
26.62
1.048
26.62
D
± .010
[±.254]
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.252
6.40
.252
6.40
.165
4.19
.165
4.19
.165
4.19
.165
4.19
.208
5.28
.208
5.28
E
± .005
[±.127]
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.295
7.49
.295
7.49
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
F
± .005
[±.127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
.715
18.16
.715
18.16
1.115
28.32
1.115
28.32
1.270
32.26
1.270
32.26
1.215
30.86
1.215
30.86
Avg. Weight
lbs. ± 5%
[grams]
.003
1.36
.003
1.36
.004
1.81
.004
1.81
.005
2.26
.005
2.26
.006
2.72
.005
2.26
.007
3.17
.007
3.17
.007
3.17
.006
2.72
.007
3.17
.007
3.17
.009
4.08
.008
3.62
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
5-73
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell RF COMBOMATE Connectors
Screw Mount Coaxial
Terminations
A
F
Available now — RF
Performance in standard
subminiature rectangular
connectors, with VSWR
values of 1.01 to 1.10 in
frequencies ranging in DC
to 2.3 GHz. This is the
COMBOMATE Connector.
Contact #1
Pin
E
.193
[4.90]
B
.093
[2.36]
This series of connectors
incorporates the same metal
shells and twist pin contacts
used in the widely accepted,
high reliability, MCDM Series.
The RF COMBOMATE
Connector Series will
accommodate RG 196 A/U
or RG 178 B/U coaxial cable
terminated in a unique
manner in standard, already
tooled insert layouts. This
feature results in savings in
cost, time and space.
The RF COMBOMATE
Connector Series will
accommodate a maximum
of 17 RG 196 A/U or
RG 178 B/U cables in an
area of less than .225 sq.
inches [14.51 mm2]. Mixed
layouts with coaxial terminations and standard AWG 24,
26 and 28 are also immediately available in 7 different
shell sizes. The overall
envelope and mounting
dimensions of equivalent
size of COMBOMATE
Connectors are exactly the
same as the standard
MCDM Series.
.089–.094 Dia.
[2.26–2.39] 2 Plcs.
.379
[9.63]
Pin
.250
Max.
[6.35]
C
Pin
Epoxy
D
A
F
Contact #1
E
.089–.094
Dia.
[2.26–2.39]
Socket
.180
[4.57]
B
.093
[2.36]
.365
[9.27]
Socket
Socket
Epoxy
.250
Max.
[6.35]
D
Performance Data —
Coaxial Terminations
Impedance — 49.0 to 51.0 Ohms.
Voltage Standing Wave Ratio
(VSWR) — 1.01:1 to 1.10:1 at
frequency ranging in DC to 2.3 GHz.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
750 VAC at sea level;
200 VAC at 70,000 feet [21,336 m].
(Actual Test Data)
1 to 2
30 MHz
60.0 db
100 MHz
49.1 db
175 MHz
42.6 db
500 MHz
38.0 db
1000 MHz
31.6 db
2000 MHz
22.4 db
3000 MHz
21.5 db
Crosstalk
(Between Adjacent Lines)
2 to 3
3 to 4
59.8 db
60.7 db
48.3 db
51.7 db
41.4 db
47.2 db
38.8 db
39.5 db
32.0 db
30.0 db
22.5 db
22.3 db
23.9 db
21.4 db
4 to 5
60.0 db
50.6 db
47.0 db
40.0 db
32.5 db
20.8 db
24.2 db
Sample
30 MHz
100 MHz
175 MHz
500 MHz
1000 MHz
2000 MHz
3000 MHz
Insertion Loss
#2
#3
.08 db
.08 db
.24 db
.25 db
.36 db
.36 db
.50 db
.60 db
1.33 db
1.36 db
1.71 db
1.42 db
2.45 db
2.74 db
#5
.08 db
.25 db
.32 db
.48 db
1.24 db
1.45 db
2.84 db
#1
.08 db
.24 db
.35 db
.58 db
1.25 db
1.48 db
2.66 db
#4
.08 db
.25 db
.34 db
.58 db
1.35 db
1.40 db
2.86 db
Note: Verification of all test data is on file at TE Connectivity and is
available upon request.
All test runs using RG 196 A/U.
5-74
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
Screw Mount Coaxial
Terminations (Continued)
How To Specify
MCD
M3
7
P
3
18.0
Lead Length in Inches (min.)
Wire Size
3 — RG 196 A/U (White insulation)
2 — RG 178 B/U (Brown insulation)
X — Special, does not fit description*
Contact Type
P — Pin
S — Socket
Layout
3, 5, 7, 8, 10, 12, 17
Maximum RF combinations using RG 196 A/U and RG 178 B/U cable
Shell Type and Material
M3 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
5
Connector Series
Part Number
MCDM3-3P**
MCDM3-3S**
MCDM3-5P**
MCDM3-5S**
MCDM3-7P**
MCDM3-7S**
MCDM3-8P**
MCDM3-8S**
MCDM3-10P**
MCDM3-10S**
MCDM3-12P**
MCDM3-12S**
MCDM3-17P**
MCDM3-17S**
A
± .005
[± .127]
.780
19.81
.780
19.81
.930
23.62
.930
23.62
1.080
27.43
1.080
27.43
1.180
29.97
1.180
29.97
1.330
33.78
1.330
33.78
1.480
37.59
1.480
37.59
1.430
36.32
1.430
36.32
B
± .005
[± .127]
.290
7.36
.365
9.27
.440
11.18
.515
13.08
.590
14.99
.665
16.89
.690
17.53
.765
19.43
.840
21.34
.915
23.24
.990
25.15
1.065
27.05
.940
23.88
1.015
25.78
C
Max.
D
Max.
.408
10.36
.408
10.36
.558
14.17
.558
14.17
.708
17.98
.708
17.98
.808
20.52
.808
20.52
.958
24.33
.958
24.33
1.108
27.89
1.108
27.89
1.058
26.87
1.058
26.87
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.245
6.22
.245
6.22
E
± .005
[± .127]
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.250
6.35
.250
6.35
Nanominiature and Microminiature Connectors
*Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available.
Contact TE Connectivity for additional arrangement numbers.
F
± .005
[± .127]
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.270
32.26
1.270
32.26
1.215
30.86
1.215
30.86
5-75
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
Contact Arrangement as
Viewed from the Engaging
Face of the Pin Side
1
5
1
9
6
8
9
3
RG196 A/U or
RG 178 B/U
1
15
11
12
5
RG196 A/U or
RG 178 B/U
1
13
1
25
14
21
7
RG196 A/U or
RG 178 B/U
16
17
31
8
RG196 A/U or
RG 178 B/U
10
RG196 A/U or
RG 178 B/U
1
19
Center Conductor
37
20
12
RG196 A/U or
RG 178 B/U
1
Shield
Termination Pattern
18
35
19
36
51
17
RG196 A/U or
RG 178 B/U
Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using
RG 196 A/U or RG 178 B/U cable.
5-76
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MICRODOT MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
Panel Mounting
Dimensions — MCDM
.395 ± .005
[10.03 ± 0.13]
.200 ± .005
[5.08 ± 0.13]
Plug
Plugand
and Receptacle
Receptacle
Rear
Mounted
Rear Mounted
Plug
Plugand
and Receptacle
Receptacle
Front
Mounted
Front Mounted
.300 ± .005
[7.62 ± 0.13]
5
Nanominiature and Microminiature Connectors
Plug Front Mounted
Receptacle Rear Mounted
Panel Cutout Dimensions
Screw Mounting
Number
of
Contacts
.005
.089 +– .000
+ 0.13
[2.26 – 0.00 ]
C
9
B
21
A
Full
Radius
(Typ.)
Front
15
R .015
[.381]
Max. Typ.
Figure 1
25
31
37
C
.089
[2.26]
Full
Radius
(Typ.)
A
R
.005
.075 +– .000
+ 0.13
[1.90 – 0.00 ]
B
51
Fig.
1
2
1
2
1
2
1
2
1
2
1
2
1
2
A
+ .004 [+ .102]
– .000 [– .000]
.412 [10.46]
.384 [9.75]
.562 [14.27]
.534 [13.56]
.712 [18.08]
.684 [17.37]
.812 [20.62]
.784 [19.91]
.962 [24.43]
.934 [23.72]
1.112 [28.24]
1.084 [27.53]
1.062 [26.97]
1.034 [26.26]
B
+ .004 [+ .102]
– .000 [– .000]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.177 [4.50]
.222 [5.64]
.224 [5.69]
.264 [6.71]
C
+ .005 [+ .127]
– .000 [– .000]
.570 [14.48]
.570 [14.48]
.720 [18.29]
.720 [18.29]
.870 [22.10]
.870 [22.10]
.970 [24.64]
.970 [24.64]
1.120 [28.45]
1.120 [28.45]
1.270 [32.26]
1.270 [32.26]
1.220 [30.99]
1.220 [30.99]
116/117
Rear
Figure 2
Note: Front mounting preferred.
5-77
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MIL-DTL-83513 Cross Reference
MCKS (Metal Shell)
Military Part No.
M83513/01-A*
M83513/01-B*
M83513/01-C*
M83513/01-D*
M83513/01-E*
M83513/01-F*
M83513/01-G*
M83513/01-H*
M83513/02-A*
M83513/02-B*
M83513/02-C*
M83513/02-D*
M83513/02-E*
M83513/02-F*
M83513/02-G*
M83513/02-H*
M83513/03-A01*
M83513/03-B01*
M83513/03-C01*
M83513/03-D01*
M83513/03-E01*
M83513/03-F01*
M83513/03-G01*
M83513/03-H01*
M83513/03-A02*
M83513/03-B02*
M83513/03-C02*
M83513/03-D02*
M83513/03-E02*
M83513/03-F02*
M83513/03-G02*
M83513/03-H02*
M83513/03-A03*
M83513/03-B03*
M83513/03-C03*
M83513/03-D03*
M83513/03-E03*
M83513/03-F03*
M83513/03-G03*
M83513/03-H03*
M83513/03-A04*
M83513/03-B04*
M83513/03-C04*
M83513/03-D04*
M83513/03-E04*
M83513/03-F04*
M83513/03-G04*
M83513/03-H04*
M83513/03-A05*
M83513/03-B05*
M83513/03-C05*
M83513/03-D05*
M83513/03-E05*
M83513/03-F05*
M83513/03-G05*
M83513/03-H05*
M83513/03-A06*
M83513/03-B06*
M83513/03-C06*
M83513/03-D06*
MICRODOT Part No.
MCKS-**-B- 9PS
MCKS-**-B- 15PS
MCKS-**-B- 21PS
MCKS-**-B- 25PS
MCKS-**-B- 31PS
MCKS-**-B- 37PS
MCKS-**-B- 51PS
MCKS-**-B-100PS
MCKS-**-B- 9SS
MCKS-**-B- 15SS
MCKS-**-B- 21SS
MCKS-**-B- 25SS
MCKS-**-B- 31SS
MCKS-**-B- 37SS
MCKS-**-B- 51SS
MCKS-**-B-100SS
MCKS-**-B- 9P6G1-18.0
MCKS-**-B- 15P6G1-18.0
MCKS-**-B- 21P6G1-18.0
MCKS-**-B- 25P6G1-18.0
MCKS-**-B- 31P6G1-18.0
MCKS-**-B- 37P6G1-18.0
MCKS-**-B- 51P6G1-18.0
MCKS-**-B-100P6G1-18.0
MCKS-**-B- 9P6G1-36.0
MCKS-**-B- 15P6G1-36.0
MCKS-**-B- 21P6G1-36.0
MCKS-**-B- 25P6G1-36.0
MCKS-**-B- 31P6G1-36.0
MCKS-**-B- 37P6G1-36.0
MCKS-**-B- 51P6G1-36.0
MCKS-**-B-100P6G1-36.0
MCKS-**-B- 9P6G9-18.0
MCKS-**-B- 15P6G9-18.0
MCKS-**-B- 21P6G9-18.0
MCKS-**-B- 25P6G9-18.0
MCKS-**-B- 31P6G9-18.0
MCKS-**-B- 37P6G9-18.0
MCKS-**-B- 51P6G9-18.0
MCKS-**-B-100P6G9-18.0
MCKS-**-B- 9P6G9-36.0
MCKS-**-B- 15P6G9-36.0
MCKS-**-B- 21P6G9-36.0
MCKS-**-B- 25P6G9-36.0
MCKS-**-B- 31P6G9-36.0
MCKS-**-B- 37P6G9-36.0
MCKS-**-B- 51P6G9-36.0
MCKS-**-B-100P6G9-36.0
MCKS-**-B- 9P5L4-0.5
MCKS-**-B- 15P5L4-0.5
MCKS-**-B- 21P5L4-0.5
MCKS-**-B- 25P5L4-0.5
MCKS-**-B- 31P5L4-0.5
MCKS-**-B- 37P5L4-0.5
MCKS-**-B- 51P5L4-0.5
MCKS-**-B-100P5L4-0.5
MCKS-**-B- 9P5L4-1.0
MCKS-**-B- 15P5L4-1.0
MCKS-**-B- 21P5L4-1.0
MCKS-**-B- 25P5L4-1.0
Military Part No.
M83513/03-E06*
M83513/03-F06*
M83513/03-G06*
M83513/03-H06*
M83513/03-A07*
M83513/03-B07*
M83513/03-C07*
M83513/03-D07*
M83513/03-E07*
M83513/03-F07*
M83513/03-G07*
M83513/03-H07*
M83513/03-A08*
M83513/03-B08*
M83513/03-C08*
M83513/03-D08*
M83513/03-E08*
M83513/03-F08*
M83513/03-G08*
M83513/03-H08*
M83513/03-A09*
M83513/03-B09*
M83513/03-C09*
M83513/03-D09*
M83513/03-E09*
M83513/03-F09*
M83513/03-G09*
M83513/03-H09*
M83513/03-A10*
M83513/03-B10*
M83513/03-C10*
M83513/03-D10*
M83513/03-E10*
M83513/03-F10*
M83513/03-G10*
M83513/03-H10*
M83513/03-A11*
M83513/03-B11*
M83513/03-C11*
M83513/03-D11*
M83513/03-E11*
M83513/03-F11*
M83513/03-G11*
M83513/03-H11*
M83513/03-A12*
M83513/03-B12*
M83513/03-C12*
M83513/03-D12*
M83513/03-E12*
M83513/03-F12*
M83513/03-G12*
M83513/03-H12*
M83513/03-A13*
M83513/03-B13*
M83513/03-C13*
M83513/03-D13*
M83513/03-E13*
M83513/03-F13*
M83513/03-G13*
M83513/03-H13*
MICRODOT Part No.
MCKS-**-B- 31P5L4-1.0
MCKS-**-B- 37P5L4-1.0
MCKS-**-B- 51P5L4-1.0
MCKS-**-B-100P5L4-1.0
MCKS-**-B- 9P5L5-0.5
MCKS-**-B- 15P5L5-0.5
MCKS-**-B- 21P5L5-0.5
MCKS-**-B- 25P5L5-0.5
MCKS-**-B- 31P5L5-0.5
MCKS-**-B- 37P5L5-0.5
MCKS-**-B- 51P5L5-0.5
MCKS-**-B-100P5L5-0.5
MCKS-**-B- 9P5L5-1.0
MCKS-**-B- 15P5L5-1.0
MCKS-**-B- 21P5L5-1.0
MCKS-**-B- 25P5L5-1.0
MCKS-**-B- 31P5L5-1.0
MCKS-**-B- 37P5L5-1.0
MCKS-**-B- 51P5L5-1.0
MCKS-**-B-100P5L5-1.0
MCKS-**-B- 9P6Q1-18.0
MCKS-**-B- 15P6Q1-18.0
MCKS-**-B- 21P6Q1-18.0
MCKS-**-B- 25P6Q1-18.0
MCKS-**-B- 31P6Q1-18.0
MCKS-**-B- 37P6Q1-18.0
MCKS-**-B- 51P6Q1-18.0
MCKS-**-B-100P6Q1-18.0
MCKS-**-B- 9P6Q1-36.0
MCKS-**-B- 15P6Q1-36.0
MCKS-**-B- 21P6Q1-36.0
MCKS-**-B- 25P6Q1-36.0
MCKS-**-B- 31P6Q1-36.0
MCKS-**-B- 37P6Q1-36.0
MCKS-**-B- 51P6Q1-36.0
MCKS-**-B-100P6Q1-36.0
MCKS-**-B- 9P6Q9-18.0
MCKS-**-B- 15P6Q9-18.0
MCKS-**-B- 21P6Q9-18.0
MCKS-**-B- 25P6Q9-18.0
MCKS-**-B- 31P6Q9-18.0
MCKS-**-B- 37P6Q9-18.0
MCKS-**-B- 51P6Q9-18.0
MCKS-**-B-100P6Q9-18.0
MCKS-**-B- 9P6Q9-36.0
MCKS-**-B- 15P6Q9-36.0
MCKS-**-B- 21P6Q9-36.0
MCKS-**-B- 25P6Q9-36.0
MCKS-**-B- 31P6Q9-36.0
MCKS-**-B- 37P6Q9-36.0
MCKS-**-B- 51P6Q9-36.0
MCKS-**-B-100P6Q9-36.0
MCKS-**-B- 9P6G1-72.0
MCKS-**-B- 1 5P6G1-72.0
MCKS-**-B- 21P6G1-72.0
MCKS-**-B- 25P6G1-72.0
MCKS-**-B- 31P6G1-72.0
MCKS-**-B- 37P6G1-72.0
MCKS-**-B- 51P6G1-72.0
MCKS-**-B-100P6G1-72.0
Military Part No.
M83513/03-A14*
M83513/03-B14*
M83513/03-C14*
M83513/03-D14*
M83513/03-E14*
M83513/03-F14*
M83513/03-G14*
M83513/03-H14*
M83513/03-A15*
M83513/03-B15*
M83513/03-C15*
M83513/03-D15*
M83513/03-E15*
M83513/03-F15*
M83513/03-G15*
M83513/03-H15*
M83513/03-A16*
M83513/03-B16*
M83513/03-C16*
M83513/03-D16*
M83513/03-E16*
M83513/03-F16*
M83513/03-G16*
M83513/03-H16*
M83513/04-A01*
M83513/04-B01*
M83513/04-C01*
M83513/04-D01*
M83513/04-E01*
M83513/04-F01*
M83513/04-G01*
M83513/04-H01*
M83513/04-A02*
M83513/04-B02*
M83513/04-C02*
M83513/04-D02*
M83513/04-E02*
M83513/04-F02*
M83513/04-G02*
M83513/04-H02*
M83513/04-A03*
M83513/04-B03*
M83513/04-C03*
M83513/04-D03*
M83513/04-E03*
M83513/04-F03*
M83513/04-G03*
M83513/04-H03*
M83513/04-A04*
M83513/04-B04*
M83513/04-C04*
M83513/04-D04*
M83513/04-E04*
M83513/04-F04*
M83513/04-G04*
M83513/04-H04*
M83513/04-A05*
M83513/04-B05*
M83513/04-C05*
M83513/04-D05*
MICRODOT Part No.
MCKS-**-B- 9P6G9-72.0
MCKS-**-B- 15P6G9-72.0
MCKS-**-B- 21P6G9-72.0
MCKS-**-B- 25P6G9-72.0
MCKS-**-B- 31P6G9-72.0
MCKS-**-B- 37P6G9-72.0
MCKS-**-B- 51P6G9-72.0
MCKS-**-B-100P6G9-72.0
MCKS-**-B- 9P6Q1-72.0
MCKS-**-B- 15P6Q1-72.0
MCKS-**-B- 21P6Q1-72.0
MCKS-**-B- 25P6Q1-72.0
MCKS-**-B- 31P6Q1-72.0
MCKS-**-B- 37P6Q1-72.0
MCKS-**-B- 51P6Q1-72.0
MCKS-**-B-100P6Q1-72.0
MCKS-**-B- 9P6Q9-72.0
MCKS-**-B- 15P6Q9-72.0
MCKS-**-B- 21P6Q9-72.0
MCKS-**-B- 25P6Q9-72.0
MCKS-**-B- 31P6Q9-72.0
MCKS-**-B- 37P6Q9-72.0
MCKS-**-B- 51P6Q9-72.0
MCKS-**-B-100P6Q9-72.0
MCKS-**-B- 9S6G1-18.0
MCKS-**-B- 15S6G1-18.0
MCKS-**-B- 21S6G1-18.0
MCKS-**-B- 25S6G1-18.0
MCKS-**-B- 31S6G1-18.0
MCKS-**-B- 37S6G1-18.0
MCKS-**-B- 51S6G1-18.0
MCKS-**-B-100S6G1-18.0
MCKS-**-B- 9S6G1-36.0
MCKS-**-B- 15S6G1-36.0
MCKS-**-B- 21S6G1-36.0
MCKS-**-B- 25S6G1-36.0
MCKS-**-B- 31S6G1-36.0
MCKS-**-B- 37S6G1-36.0
MCKS-**-B- 51S6G1-36.0
MCKS-**-B-100S6G1-36.0
MCKS-**-B- 9S6G9-18.0
MCKS-**-B- 15S6G9-18.0
MCKS-**-B- 21S6G9-18.0
MCKS-**-B- 25S6G9-18.0
MCKS-**-B- 31S6G9-18.0
MCKS-**-B- 37S6G9-18.0
MCKS-**-B- 51S6G9-18.0
MCKS-**-B-100S6G9-18.0
MCKS-**-B- 9S6G9-36.0
MCKS-**-B- 15S6G9-36.0
MCKS-**-B- 21S6G9-36.0
MCKS-**-B- 25S6G9-36.0
MCKS-**-B- 31S6G9-36.0
MCKS-**-B- 37S6G9-36.0
MCKS-**-B- 51S6G9-36.0
MCKS-**-B-100S6G9-36.0
MCKS-**-B- 9S5L4-0.5
MCKS-**-B- 15S5L4-0.5
MCKS-**-B- 21S5L4-0.5
MCKS-**-B- 25S5L4-0.5
5-78
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCKS (Metal Shell) (Continued)
MICRODOT Part No.
MCKS-**-B- 31S5L4-0.5
MCKS-**-B- 37S5L4-0.5
MCKS-**-B- 51S5L4-0.5
MCKS-**-B-100S5L4-0.5
MCKS-**-B- 9S5L4-1.0
MCKS-**-B- 15S5L4-1.0
MCKS-**-B- 21S5L4-1.0
MCKS-**-B- 25S5L4-1.0
MCKS-**-B- 31S5L4-1.0
MCKS-**-B- 37S5L4-1.0
MCKS-**-B- 51S5L4-1.0
MCKS-**-B-100S5L4-1.0
MCKS-**-B- 9S5L5-0.5
MCKS-**-B- 15S5L5-0.5
MCKS-**-B- 21S5L5-0.5
MCKS-**-B- 25S5L5-0.5
MCKS-**-B- 31S5L5-0.5
MCKS-**-B- 37S5L5-0.5
MCKS-**-B- 51S5L5-0.5
MCKS-**-B-100S5L5-0.5
MCKS-**-B- 9S5L5-1.0
MCKS-**-B- 15S5L5-1.0
MCKS-**-B- 21S5L5-1.0
MCKS-**-B- 25S5L5-1.0
MCKS-**-B- 31S5L5-1.0
MCKS-**-B- 37S5L5-1.0
MCKS-**-B- 51S5L5-1.0
MCKS-**-B-100S5L5-1.0
MCKS-**-B- 9S6Q1-18.0
MCKS-**-B- 15S6Q1-18.0
MCKS-**-B- 21S6Q1-18.0
Military Part No.
M83513/04-D09*
M83513/04-E09*
M83513/04-F09*
M83513/04-G09*
M83513/04-H09*
M83513/04-A10*
M83513/04-B10*
M83513/04-C10*
M83513/04-D10*
M83513/04-E10*
M83513/04-F10*
M83513/04-G10*
M83513/04-H10*
M83513/04-A11*
M83513/04-B11*
M83513/04-C11*
M83513/04-D11*
M83513/04-E11*
M83513/04-F11*
M83513/04-G11*
M83513/04-H11*
M83513/04-A12*
M83513/04-B12*
M83513/04-C12*
M83513/04-D12*
M83513/04-E12*
M83513/04-F12*
M83513/04-G12*
M83513/04-H12*
M83513/04-A13*
M83513/04-B13*
MICRODOT Part No.
MCKS-**-B- 25S6Q1-18.0
MCKS-**-B- 31S6Q1-18.0
MCKS-**-B- 37S6Q1-18.0
MCKS-**-B- 51S6Q1-18.0
MCKS-**-B-100S6Q1-18.0
MCKS-**-B- 9S6Q1-36.0
MCKS-**-B- 15S6Q1-36.0
MCKS-**-B- 21S6Q1-36.0
MCKS-**-B- 25S6Q1-36.0
MCKS-**-B- 31S6Q1-36.0
MCKS-**-B- 37S6Q1-36.0
MCKS-**-B- 51S6Q1-36.0
MCKS-**-B-100S6Q1-36.0
MCKS-**-B- 9S6Q9-18.0
MCKS-**-B- 15S6Q9-18.0
MCKS-**-B- 21S6Q9-18.0
MCKS-**-B- 25S6Q9-18.0
MCKS-**-B- 31S6Q9-18.0
MCKS-**-B- 37S6Q9-18.0
MCKS-**-B- 51S6Q9-18.0
MCKS-**-B-100S6Q9-18.0
MCKS-**-B- 9S6Q9-36.0
MCKS-**-B- 15S6Q9-36.0
MCKS-**-B- 21S6Q9-36.0
MCKS-**-B- 25S6Q9-36.0
MCKS-**-B- 31S6Q9-36.0
MCKS-**-B- 37S6Q9-36.0
MCKS-**-B- 51S6Q9-36.0
MCKS-**-B-100S6Q9-36.0
MCKS-**-B- 9S6G1-72.0
MCKS-**-B- 15S6G1-72.0
Military Part No.
M83513/04-C13*
M83513/04-D13*
M83513/04-E13*
M83513/04-F13*
M83513/04-G13*
M83513/04-H13*
M83513/04-A14*
M83513/04-B14*
M83513/04-C14*
M83513/04-D14*
M83513/04-E14*
M83513/04-F14*
M83513/04-G14*
M83513/04-H14*
M83513/04-A15*
M83513/04-B15*
M83513/04-C15*
M83513/04-D15*
M83513/04-E15*
M83513/04-F15*
M83513/04-G15*
M83513/04-H15*
M83513/04-A16*
M83513/04-B16*
M83513/04-C16*
M83513/04-D16*
M83513/04-E16*
M83513/04-F16*
M83513/04-G16*
M83513/04-H16*
MICRODOT Part No.
MCKS-**-B- 21S6G1-72.0
MCKS-**-B- 25S6G1-72.0
MCKS-**-B- 31S6G1-72.0
MCKS-**-B- 37S6G1-72.0
MCKS-**-B- 51S6G1-72.0
MCKS-**-B-100S6G1-72.0
MCKS-**-B- 9S6G9-72.0
MCKS-**-B- 15S6G9-72.0
MCKS-**-B- 21S6G9-72.0
MCKS-**-B- 25S6G9-72.0
MCKS-**-B- 31S6G9-72.0
MCKS-**-B- 37S6G9-72.0
MCKS-**-B- 51S6G9-72.0
MCKS-**-B-100S6G9-72.0
MCKS-**-B- 9S6Q1-72.0
MCKS-**-B- 15S6Q1-72.0
MCKS-**-B- 21S6Q1-72.0
MCKS-**-B- 25S6Q1-72.0
MCKS-**-B- 31S6Q1-72.0
MCKS-**-B- 37S6Q1-72.0
MCKS-**-B- 51S6Q1-72.0
MCKS-**-B-100S6Q1-72.0
MCKS-**-B- 9S6Q9-72.0
MCKS-**-B- 15S6Q9-72.0
MCKS-**-B- 21S6Q9-72.0
MCKS-**-B- 25S6Q9-72.0
MCKS-**-B- 31S6Q9-72.0
MCKS-**-B- 37S6Q9-72.0
MCKS-**-B- 51S6Q9-72.0
MCKS-**-B-100S6Q9-72.0
Military Part No.
M83513/05-05
M83513/05-15
M83513/05-06
M83513/05-16
MICRODOT Part No.
“S. HD, J/S, L.F, #2”
“S. HD, J/S, L.F, #4”
“S. HD, J/S, H.F, #2”
“S. HD, J/S, H.F, #4”
Military Part No.
M83513/05-07
M83513/05-17
MICRODOT Part No.
“JACKPOST ASSY #2”
“JACKPOST ASSY, #4”
Military Part No.
M83513/07-G
M83513/08-A01
M83513/08-B01
M83513/08-C01
M83513/08-D01
M83513/08-E01
M83513/08-F01
M83513/08-G01
M83513/08-A02
M83513/08-B02
M83513/08-C02
M83513/08-D02
M83513/08-E02
MICRODOT Part No.
MCDR3-B-51SS
MCDR3-B- 9P6G1-18.0
MCDR3-B-15P6G1-18.0
MCDR3-B-21P6G1-18.0
MCDR3-B-25P6G1-18.0
MCDR3-B-31P6G1-18.0
MCDR3-B-37P6G1-18.0
MCDR3-B-51P6G1-18.0
MCDR3-B- 9P6G1-36.0
MCDR3-B-15P6G1-36.0
MCDR3-B-21P6G1-36.0
MCDR3-B-25P6G1-36.0
MCDR3-B-31P6G1-36.0
Military Part No.
M83513/08-F02
M83513/08-G02
M83513/08-A03
M83513/08-B03
M83513/08-C03
M83513/08-D03
M83513/08-E03
M83513/08-F03
M83513/08-G03
M83513/08-A04
M83513/08-B04
M83513/08-C04
M83513/08-D04
5
Nanominiature and Microminiature Connectors
Military Part No.
M83513/04-E05*
M83513/04-F05*
M83513/04-G05*
M83513/04-H05*
M83513/04-A06*
M83513/04-B06*
M83513/04-C06*
M83513/04-D06*
M83513/04-E06*
M83513/04-F06*
M83513/04-G06*
M83513/04-H06*
M83513/04-A07*
M83513/04-B07*
M83513/04-C07*
M83513/04-D07*
M83513/04-E07*
M83513/04-F07*
M83513/04-G07*
M83513/04-H07*
M83513/04-A08*
M83513/04-B08*
M83513/04-C08*
M83513/04-D08*
M83513/04-E08*
M83513/04-F08*
M83513/04-G08*
M83513/04-H08*
M83513/04-A09*
M83513/04-B09*
M83513/04-C09*
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Hardware
Military Part No.
M83513/05-02
M83513/05-12
M83513/05-03
M83513/05-13
MICRODOT Part No.
“A. HD, J/S, L.F, #2”
“A. HD, J/S, L.F, #4”
“A. HD, J/S,H.F, #2”
“A. HD, J/S, H.F. #4”
MCDR (Plastic Shell)
Military Part No.
M83513/06-A
M83513/06-B
M83513/06-C
M83513/06-D
M83513/06-E
M83513/06-F
M83513/06-G
M83513/07-A
M83513/07-B
M83513/07-C
M83513/07-D
M83513/07-E
M83513/07-F
MICRODOT Part No.
MCDR3-B- 9PS
MCDR3-B-15PS
MCDR3-B-21PS
MCDR3-B-25PS
MCDR3-B-31PS
MCDR3-B-37PS
MCDR3-B-51PS
MCDR3-B- 9SS
MCDR3-B-15SS
MCDR3-B-21SS
MCDR3-B-25SS
MCDR3-B-31SS
MCDR3-B-37SS
MICRODOT Part No.
MCDR3-B-37P6G1-36.0
MCDR3-B-51P6G1-36.0
MCDR3-B- 9P6G9-18.0
MCDR3-B-15P6G9-18.0
MCDR3-B-21P6G9-18.0
MCDR3-B-25P6G9-18.0
MCDR3-B-31P6G9-18.0
MCDR3-B-37P6G9-18.0
MCDR3-B-51P6G9-18.0
MCDR3-B- 9P6G9-36.0
MCDR3-B-15P6G9-36.0
MCDR3-B-21P6G9-36.0
MCDR3-B-25P6G9-36.0
5-79
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCDR (Plastic Shell) (Continued)
Military Part No.
M83513/08-E04
M83513/08-F04
M83513/08-G04
M83513/08-A05
M83513/08-B05
M83513/08-C05
M83513/08-D05
M83513/08-E05
M83513/08-F05
M83513/08-G05
M83513/08-A06
M83513/08-B06
M83513/08-C06
M83513/08-D06
M83513/08-E06
M83513/08-F06
M83513/08-G06
M83513/08-A07
M83513/08-B07
M83513/08-C07
M83513/08-D07
M83513/08-E07
M83513/08-F07
M83513/08-G07
M83513/08-A08
M83513/08-B08
M83513/08-C08
M83513/08-D08
M83513/08-E08
M83513/08-F08
M83513/08-G08
M83513/08-A09
M83513/08-B09
M83513/08-C09
M83513/08-D09
M83513/08-E09
M83513/08-F09
M83513/08-G09
M83513/08-A10
M83513/08-B10
M83513/08-C10
M83513/08-D10
M83513/08-E10
M83513/08-F10
M83513/08-G10
M83513/08-A11
M83513/08-B11
M83513/08-C11
M83513/08-D11
M83513/08-E11
M83513/08-F11
M83513/08-G11
M83513/08-A12
M83513/08-B12
M83513/08-C12
M83513/08-D12
M83513/08-E12
M83513/08-F12
M83513/08-G12
M83513/08-A13
MICRODOT Part No.
MCDR3-B-31P6G9-36.0
MCDR3-B-37P6G9-36.0
MCDR3-B-51P6G9-36.0
MCDR3-B- 9P5L4-0.5
MCDR3-B-15P5L4-0.5
MCDR3-B-21P5L4-0.5
MCDR3-B-25P5L4-0.5
MCDR3-B-31P5L4-0.5
MCDR3-B-37P5L4-0.5
MCDR3-B-51P5L4-0.5
MCDR3-B- 9P5L4-1.0
MCDR3-B-15P5L4-1.0
MCDR3-B-21P5L4-1.0
MCDR3-B-25P5L4-1.0
MCDR3-B-31P5L4-1.0
MCDR3-B-37P5L4-1.0
MCDR3-B-51P5L4-1.0
MCDR3-B- 9P5L5-0.5
MCDR3-B-15P5L5-0.5
MCDR3-B-21P5L5-0.5
MCDR3-B-25P5L5-0.5
MCDR3-B-31P5L5-0.5
MCDR3-B-37P5L5-0.5
MCDR3-B-51P5L5-0.5
MCDR3-B- 9P5L5-1.0
MCDR3-B-15P5L5-1.0
MCDR3-B-21P5L5-1.0
MCDR3-B-25P5L5-1.0
MCDR3-B-31P5L5-1.0
MCDR3-B-37P5L5-1.0
MCDR3-B-51P5L5-1.0
MCDR3-B- 9P6Q1-18.0
MCDR3-B-15P6Q1-18.0
MCDR3-B-21P6Q1-18.0
MCDR3-B-25P6Q1-18.0
MCDR3-B-31P6Q1-18.0
MCDR3-B-37P6Q1-18.0
MCDR3-B-51P6Q1-18.0
MCDR3-B- 9P6Q1-36.0
MCDR3-B-15P6Q1-36.0
MCDR3-B-21P6Q1-36.0
MCDR3-B-25P6Q1-36.0
MCDR3-B-31P6Q1-36.0
MCDR3-B-37P6Q1-36.0
MCDR3-B-51P6Q1-36.0
MCDR3-B- 9P6Q9-18.0
MCDR3-B-15P6Q9-18.0
MCDR3-B-21P6Q9-18.0
MCDR3-B-25P6Q9-18.0
MCDR3-B-31P6Q9-18.0
MCDR3-B-37P6Q9-18.0
MCDR3-B-51P6Q9-18.0
MCDR3-B- 9P6Q9-36.0
MCDR3-B-15P6Q9-36.0
MCDR3-B-21P6Q9-36.0
MCDR3-B-25P6Q9-36.0
MCDR3-B-31P6Q9-36.0
MCDR3-B-37P6Q9-36.0
MCDR3-B-51P6Q9-36.0
MCDR3-B- 9P6G1-72.0
Military Part No.
M83513/08-B13
M83513/08-C13
M83513/08-D13
M83513/08-E13
M83513/08-F13
M83513/08-G13
M83513/08-A14
M83513/08-B14
M83513/08-C14
M83513/08-D14
M83513/08-E14
M83513/08-F14
M83513/08-G14
M83513/08-A15
M83513/08-B15
M83513/08-C15
M83513/08-D15
M83513/08-E15
M83513/08-F15
M83513/08-G15
M83513/08-A16
M83513/08-B16
M83513/08-C16
M83513/08-D16
M83513/08-E16
M83513/08-F16
M83513/08-G16
M83513/09-A01
M83513/09-B01
M83513/09-C01
M83513/09-D01
M83513/09-E01
M83513/09-F01
M83513/09-G01
M83513/09-A02
M83513/09-B02
M83513/09-C02
M83513/09-D02
M83513/09-E02
M83513/09-F02
M83513/09-G02
M83513/09-A03
M83513/09-B03
M83513/09-C03
M83513/09-D03
M83513/09-E03
M83513/09-F03
M83513/09-G03
M83513/09-A04
M83513/09-B04
M83513/09-C04
M83513/09-D04
M83513/09-E04
M83513/09-F04
M83513/09-G04
M83513/09-A05
M83513/09-B05
M83513/09-C05
M83513/09-D05
M83513/09-E05
MICRODOT Part No.
MCDR3-B-15P6G1-72.0
MCDR3-B-21P6G1-72.0
MCDR3-B-25P6G1-72.0
MCDR3-B-31P6G1-72.0
MCDR3-B-37P6G1-72.0
MCDR3-B-51P6G1-72.0
MCDR3-B- 9P6G9-72.0
MCDR3-B-15P6G9-72.0
MCDR3-B-21P6G9-72.0
MCDR3-B-25P6G9-72.0
MCDR3-B-31P6G9-72.0
MCDR3-B-37P6G9-72.0
MCDR3-B-51P6G9-72.0
MCDR3-B- 9P6Q1-72.0
MCDR3-B-15P6Q1-72.0
MCDR3-B-21P6Q1-72.0
MCDR3-B-25P6Q1-72.0
MCDR3-B-31P6Q1-72.0
MCDR3-B-37P6Q1-72.0
MCDR3-B-51P6Q1-72.0
MCDR3-B- 9P6Q9-72.0
MCDR3-B-15P6Q9-72.0
MCDR3-B-21P6Q9-72.0
MCDR3-B-25P6Q9-72.0
MCDR3-B-31P6Q9-72.0
MCDR3-B-37P6Q9-72.0
MCDR3-B-51P6Q9-72.0
MCDR3-B- 9S6G1-18.0
MCDR3-B-15S6G1-18.0
MCDR3-B-21S6G1-18.0
MCDR3-B-25S6G1-18.0
MCDR3-B-31S6G1-18.0
MCDR3-B-37S6G1-18.0
MCDR3-B-51S6G1-18.0
MCDR3-B- 9S6G1-36.0
MCDR3-B-15S6G1-36.0
MCDR3-B-21S6G1-36.0
MCDR3-B-25S6G1-36.0
MCDR3-B-31S6G1-36.0
MCDR3-B-37S6G1-36.0
MCDR3-B-51S6G1-36.0
MCDR3-B- 9S6G9-18.0
MCDR3-B- 15S6G9-18.0
MCDR3-B- 21S6G9-18.0
MCDR3-B-25S6G9-18.0
MCDR3-B-31S6G9-18.0
MCDR3-B-37S6G9-18.0
MCDR3-B-51S6G9-18.0
MCDR3-B- 9S6G9-36.0
MCDR3-B-15S6G9-36.0
MCDR3-B-21S6G9-36.0
MCDR3-B-25S6G9-36.0
MCDR3-B-31S6G9-36.0
MCDR3-B-37S6G9-36.0
MCDR3-B-51S6G9-36.0
MCDR3-B- 9S5L4-0.5
MCDR3-B-15S5L4-0.5
MCDR3-B-21S5L4-0.5
MCDR3-B-25S5L4-0.5
MCDR3-B-31S5L4-0.5
Military Part No.
M83513/09-F05
M83513/09-G05
M83513/09-A06
M83513/09-B06
M83513/09-C06
M83513/09-D06
M83513/09-E06
M83513/09-F06
M83513/09-G06
M83513/09-A07
M83513/09-B07
M83513/09-C07
M83513/09-D07
M83513/09-E07
M83513/09-F07
M83513/09-G07
M83513/09-A08
M83513/09-B08
M83513/09-C08
M83513/09-D08
M83513/09-E08
M83513/09-F08
M83513/09-G08
M83513/09-A09
M83513/09-B09
M83513/09-C09
M83513/09-D09
M83513/09-E09
M83513/09-F09
M83513/09-G09
M83513/09-A10
M83513/09-B10
M83513/09-C10
M83513/09-D10
M83513/09-E10
M83513/09-F10
M83513/09-G10
M83513/09-A11
M83513/09-B11
M83513/09-C11
M83513/09-D11
M83513/09-E11
M83513/09-F11
M83513/09-G11
M83513/09-A12
M83513/09-B12
M83513/09-C12
M83513/09-D12
M83513/09-E12
M83513/09-F12
M83513/09-G12
M83513/09-A13
M83513/09-B13
M83513/09-C13
M83513/09-D13
M83513/09-E13
M83513/09-F13
M83513/09-G13
M83513/09-A14
M83513/09-B14
MICRODOT Part No.
MCDR3-B-37S5L4-0.5
MCDR3-B-51S5L4-0.5
MCDR3-B- 9S5L4-1.0
MCDR3-B-15S5L4-1.0
MCDR3-B-21S5L4-1.0
MCDR3-B-25S5L4-1.0
MCDR3-B-31S5L4-1.0
MCDR3-B-37S5L4-1.0
MCDR3-B-51S5L4-1.0
MCDR3-B- 9S5L5-0.5
MCDR3-B-15S5L5-0.5
MCDR3-B-21S5L5-0.5
MCDR3-B-25S5L5-0.5
MCDR3-B-31S5L5-0.5
MCDR3-B-37S5L5-0.5
MCDR3-B-51S5L5-0.5
MCDR3-B- 9S5L5-1.0
MCDR3-B-15S5L5-1.0
MCDR3-B-21S5L5-1.0
MCDR3-B-25S5L5-1.0
MCDR3-B-31S5L5-1.0
MCDR3-B-37S5L5-1.0
MCDR3-B-51S5L5-1.0
MCDR3-B- 9S6Q1-18.0
MCDR3-B-15S6Q1-18.0
MCDR3-B-21S6Q1-18.0
MCDR3-B-25S6Q1-18.0
MCDR3-B-31S6Q1-18.0
MCDR3-B-37S6Q1-18.0
MCDR3-B-51S6Q1-18.0
MCDR3-B- 9S6Q1-36.0
MCDR3-B-15S6Q1-36.0
MCDR3-B-21S6Q1-36.0
MCDR3-B-25S6Q1-36.0
MCDR3-B-31S6Q1-36.0
MCDR3-B-37S6Q1-36.0
MCDR3-B-51S6Q1-36.0
MCDR3-B- 9S6Q9-18.0
MCDR3-B-15S6Q9-18.0
MCDR3-B-21S6Q9-18.0
MCDR3-B-25S6Q9-18.0
MCDR3-B-31S6Q9-18.0
MCDR3-B-37S6Q9-18.0
MCDR3-B-51S6Q9-18.0
MCDR3-B- 9S6Q9-36.0
MCDR3-B-15S6Q9-36.0
MCDR3-B-21S6Q9-36.0
MCDR3-B-25S6Q9-36.0
MCDR3-B-31S6Q9-36.0
MCDR3-B-37S6Q9-36.0
MCDR3-B-51S6Q9-36.0
MCDR3-B- 9S6G1-72.0
MCDR3-B-15S6G1-72.0
MCDR3-B-21S6G1-72.0
MCDR3-B-25S6G1-72.0
MCDR3-B-31S6G1-72.0
MCDR3-B-37S6G1-72.0
MCDR3-B-51S6G1-72.0
MCDR3-B- 9S6G9-72.0
MCDR3-B-15S6G9-72.0
5-80
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCDR (Plastic Shell) (Continued)
Military Part No.
M83513/09-C14
M83513/09-D14
M83513/09-E14
M83513/09-F14
M83513/09-G14
M83513/09-A15
M83513/09-B15
MICRODOT Part No.
MCDR3-B-21S6G9-72.0
MCDR3-B-25S6G9-72.0
MCDR3-B-31S6G9-72.0
MCDR3-B-37S6G9-72.0
MCDR3-B-51S6G9-72.0
MCDR3-B- 9S6Q1-72.0
MCDR3-B-15S6Q1-72.0
Military Part No.
M83513/09-C15
M83513/09-D15
M83513/09-E15
M83513/09-F15
M83513/09-G15
M83513/09-A16
M83513/09-B16
MICRODOT Part No.
MCDR3-B-21S6Q1-72.0
MCDR3-B-25S6Q1-72.0
MCDR3-B-31S6Q1-72.0
MCDR3-B-37S6Q1-72.0
MCDR3-B-51S6Q1-72.0
MCDR3-B- 9S6Q9-72.0
MCDR3-B-15S6Q9-72.0
Military Part No.
M83513/09-C16
M83513/09-D16
M83513/09-E16
M83513/09-F16
M83513/09-G16
MICRODOT Part No.
MCDR3-B-21S6Q9-72.0
MCDR3-B-25S6Q9-72.0
MCDR3-B-31S6Q9-72.0
MCDR3-B-37S6Q9-72.0
MCDR3-B-51S6Q9-72.0
MCK (Metal Shell)
MICRODOT Part No.
M83513/10-A01*N
M83513/10-B01*N
M83513/10-C01*N
M83513/10-D01*N
M83513/10-E01*N
M83513/10-F01*N
M83513/10-A01*P
M83513/10-B01*P
M83513/10-C01*P
M83513/10-D01*P
M83513/10-E01*P
M83513/10-F01*P
M83513/10-A02*N
M83513/10-B02*N
M83513/10-C02*N
M83513/10-D02*N
M83513/10-E02*N
M83513/10-F02*N
M83513/10-A02*P
M83513/10-B02*P
M83513/10-C02*P
M83513/10-D02*P
M83513/10-E02*P
M83513/10-F02*P
M83513/10-A03*N
M83513/10-B03*N
M83513/10-C03*N
M83513/10-D03*N
M83513/10-E03*N
M83513/10-F03*N
M83513/10-A03*P
M83513/10-B03*P
M83513/10-C03*P
M83513/10-D03*P
M83513/10-E03*P
M83513/10-F03*P
M83513/11-G01*N
M83513/11-G01*P
M83513/11-G02*N
M83513/11-G02*P
M83513/11-G03*N
M83513/11-G03*P
M83513/12-H01*N
M83513/12-H01*P
M83513/12-H02*N
M83513/12-H02*P
M83513/12-H03*N
MCK-**-B- 9PRT1
MCK-**-B- 15PRT1
MCK-**-B- 21PRT1
MCK-**-B- 25PRT1
MCK-**-B- 31PRT1
MCK-**-B- 37PRT1
MCK-**-P- 9PRT1
MCK-**-P- 15PRT1
MCK-**-P- 21PRT1
MCK-**-P- 25PRT1
MCK-**-P- 31PRT1
MCK-**-P- 37PRT1
MCK-**-B- 9PRT1A
MCK-**-B- 15PRT1A
MCK-**-B- 21PRT1A
MCK-**-B- 25PRT1A
MCK-**-B- 31PRT1A
MCK-**-B- 37PRT1A
MCK-**-P- 9PRT1A
MCK-**-P- 15PRT1A
MCK-**-P- 21PRT1A
MCK-**-P- 25PRT1A
MCK-**-P- 31PRT1A
MCK-**-P- 37PRT1A
MCK-**-B- 9PRT1B
MCK-**-B- 15PRT1B
MCK-**-B- 21PRT1B
MCK-**-B- 25PRT1B
MCK-**-B- 31PRT1B
MCK-**-B- 37PRT1B
MCK-**-P- 9PRT1B
MCK-**-P- 15PRT1B
MCK-**-P- 21PRT1B
MCK-**-P- 25PRT1B
MCK-**-P- 31PRT1B
MCK-**-P- 37PRT1B
MCK-**-B- 51PRT1
MCK-**-P- 51PRT1
MCK-**-B- 51PRT1A
MCK-**-P- 51PRT1A
MCK-**-B- 51PRT1B
MCK-**-P- 51PRT1B
MCK-**-B-100PRT1
MCK-**-S-100PRT1
MCK-**-B-100PRT1A
MCK-**-S-100PRT1A
MCK-**-B-100PRT1B
Military Part No.
M83513/12-H03*P
M83513/13-A01*N
M83513/13-B01*N
M83513/13-C01*N
M83513/13-D01*N
M83513/13-E01*N
M83513/13-F01*N
M83513/13-A01*P
M83513/13-B01*P
M83513/13-C01*P
M83513/13-D01*P
M83513/13-E01*P
M83513/13-F01*P
M83513/13-A02*N
M83513/13-B02*N
M83513/13-C02*N
M83513/13-D02*N
M83513/13-E02*N
M83513/13-F02*N
M83513/13-A02*P
M83513/13-B02*P
M83513/13-C02*P
M83513/13-D02*P
M83513/13-E02*P
M83513/13-F02*P
M83513/13-A03*N
M83513/13-B03*N
M83513/13-C03*N
M83513/13-D03*N
M83513/13-E03*N
M83513/13-F03*N
M83513/13-A03*P
M83513/13-B03*P
M83513/13-C03*P
M83513/13-D03*P
M83513/13-E03*P
M83513/13-F03*P
M83513/14-G01*N
M83513/14-G01*P
M83513/14-G02*N
M83513/14-G02*P
M83513/14-G03*N
M83513/14-G03*P
M83513/15-H01*N
M83513/15-H01*P
M83513/15-H02*N
M83515/15-H02*P
MICRODOT Part No.
MCK-**-S-100PRT1B
MCK-**-B- 9SRT1
MCK-**-B- 15SRT1
MCK-**-B- 21SRT1
MCK-**-B- 25SRT1
MCK-**-B- 31SRT1
MCK-**-B- 37SRT1
MCK-**-P- 9SRT1
MCK-**-P- 15SRT1
MCK-**-P- 21SRT1
MCK-**-P- 25SRT1
MCK-**-P- 31SRT1
MCK-**-P- 37SRT1
MCK-**-B- 9SRT1A
MCK-**-B- 15SRT1A
MCK-**-B- 21SRT1A
MCK-**-B- 25SRT1A
MCK-**-B- 31SRT1A
MCK-**-B- 37SRT1A
MCK-**-P- 9SRT1A
MCK-**-P- 15SRT1A
MCK-**-P- 21SRT1A
MCK-**-P- 25SRT1A
MCK-**-P- 31SRT1A
MCK-**-P- 37SRT1A
MCK-**-B- 9SRT1B
MCK-**-B- 15SRT1B
MCK-**-B- 21SRT1B
MCK-**-B- 25SRT1B
MCK-**-B- 31SRT1B
MCK-**-B- 37SRT1B
MCK-**-P- 9SRT1B
MCK-**-P- 15SRT1B
MCK-**-P- 21SRT1B
MCK-**-P- 25SRT1B
MCK-**-P- 31SRT1B
MCK-**-P- 37SRT1B
MCK-**-B- 51SRT1
MCK-**-P- 51SRT1
MCK-**-B- 51SRT1A
MCK-**-P- 51SRT1A
MCK-**-B- 51SRT1B
MCK-**-P- 51SRT1B
MCK-**-B-100SRT1
MCK-**-S-100SRT1
MCK-**-B-100SRT1A
MCK-**-S-100SRT1A
Military Part No.
M83513/15-H03*N
M83513/15-H03*P
M83513/22-A01*N
M83513/22-B01*N
M83513/22-C01*N
M83513/22-D01*N
M83513/22-E01*N
M83513/22-F01*N
M83513/22-A01*P
M83513/22-B01*P
M83513/22-C01*P
M83513/22-D01*P
M83513/22-E01*P
M83513/22-F01*P
M83513/22-A02*N
M83513/22-B02*N
M83513/22-C02*N
M83513/22-D02*N
M83513/22-E02*N
M83513/22-F02*N
M83513/22-A02*P
M83513/22-B02*P
M83513/22-C02*P
M83513/22-D02*P
M83513/22-E02*P
M83513/22-F02*P
M83513/22-A03*N
M83513/22-B03*N
M83513/22-C03*N
M83513/22-D03*N
M83513/22-E03*N
M83513/22-F03*N
M83513/22-A03*P
M83513/22-B03*P
M83513/22-C03*P
M83513/22-D03*P
M83513/22-E03*P
M83513/22-F03*P
M83513/23-G01*N
M83513/23-G01*P
M83513/23-G02*N
M83513/23-G02*P
M83513/23-G03*N
M83513/23-G03*P
M83513/24-H01*N
M83513/24-H01*P
M83513/24-H02*N
MICRODOT Part No.
MCK-**-B-100SRT1B
MCK-**-S-100SRT1B
MCK-**-B- 9PST1
MCK-**-B- 15PST1
MCK-**-B- 21PST1
MCK-**-B- 25PST1
MCK-**-B- 31PST1
MCK-**-B- 37PST1
MCK-**-P- 9PST1
MCK-**-P- 15PST1
MCK-**-P- 21PST1
MCK-**-P- 25PST1
MCK-**-P- 31PST1
MCK-**-P- 37PST1
MCK-**-B- 9PST1A
MCK-**-B- 15PST1A
MCK-**-B- 21PST1A
MCK-**-B- 25PST1A
MCK-**-B- 31PST1A
MCK-**-B- 37PST1A
MCK-**-P- 9PST1A
MCK-**-P- 15PST1A
MCK-**-P- 21PST1A
MCK-**-P- 25PST1A
MCK-**-P- 31PST1A
MCK-**-P- 37PST1A
MCK-**-B- 9PST1B
MCK-**-B- 15PST1B
MCK-**-B- 21PST1B
MCK-**-B- 25PST1B
MCK-**-B- 31PST1B
MCK-**-B- 37PST1B
MCK-**-P- 9PST1B
MCK-**-P- 15PST1B
MCK-**-P- 21PST1B
MCK-**-P- 25PST1B
MCK-**-P- 31PST1B
MCK-**-P- 37PST1B
MCK-**-B- 51PST1
MCK-**-P- 51PST1
MCK-**-B- 51PST1A
MCK-**-P- 51PST1A
MCK-**-B- 51PST1B
MCK-**-P- 51PST1B
MCK-**-B-100PST1
MCK-**-S-100PST1
MCK-**-B-100PST1A
5
Nanominiature and Microminiature Connectors
Military Part No.
5-81
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
MICRODOT Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
MCK (Metal Shell) (Continued)
Military Part No.
M83515/24-H02*P
M83513/24-H03*N
M83513/24-H03*P
M83513/25-A01*N
M83513/25-B01*N
M83513/25-C01*N
M83513/25-D01*N
M83513/25-E01*N
M83513/25-F01*N
M83513/25-A01*P
M83513/25-B01*P
M83513/25-C01*P
M83513/25-D01*P
M83513/25-E01*P
M83513/25-F01*P
M83513/25-A02*N
M83513/25-B02*N
MICRODOT Part No.
MCK-**-S-100PST1A
MCK-**-B-100PST1B
MCK-**-S-100PST1B
MCK-**-B- 9SST1
MCK-**-B- 15SST1
MCK-**-B- 21SST1
MCK-**-B- 25SST1
MCK-**-B- 31SST1
MCK-**-B- 37SST1
MCK-**-P- 9SST1
MCK-**-P- 15SST1
MCK-**-P- 21SST1
MCK-**-P- 25SST1
MCK-**-P- 31SST1
MCK-**-P- 37SST1
MCK-**-B- 9SST1A
MCK-**-B- 15SST1A
Military Part No.
M83513/25-C02*N
M83513/25-D02*N
M83513/25-E02*N
M83513/25-F02*N
M83513/25-A02*P
M83513/25-B02*P
M83513/25-C02*P
M83513/25-D02*P
M83513/25-E02*P
M83513/25-F02*P
M83513/25-A03*N
M83513/25-B03*N
M83513/25-C03*N
M83513/25-D03*N
M83513/25-E03*N
M83513/25-F03*N
M83513/25-A03*P
MICRODOT Part No.
MCK-**-B- 21SST1A
MCK-**-B- 25SST1A
MCK-**-B- 31SST1A
MCK-**-B- 37SST1A
MCK-**-P- 9SST1A
MCK-**-P- 15SST1A
MCK-**-P- 21SST1A
MCK-**-P- 25SST1A
MCK-**-P- 31SST1A
MCK-**-P- 37SST1A
MCK-**-B- 9SST1B
MCK-**-B- 15SST1B
MCK-**-B- 21SST1B
MCK-**-B- 25SST1B
MCK-**-B- 31SST1B
MCK-**-B- 37SST1B
MCK-**-P- 9SST1B
Military Part No.
M83513/25-B03*P
M83513/25-C03*P
M83513/25-D03*P
M83513/25-E03*P
M83513/25-F03*P
M83513/26-G01*N
M83513/26-G01*P
M83513/26-G02*N
M83513/26-G02*P
M83513/26-G03*N
M83513/26-G03*P
M83513/27-H01*N
M83513/27-H01*P
M83513/27-H02*N
M83515/27-H02*P
M83513/27-H03*N
M83513/27-H03*P
MICRODOT Part No.
MCK-**-P- 15SST1B
MCK-**-P- 21SST1B
MCK-**-P- 25SST1B
MCK-**-P- 31SST1B
MCK-**-P- 37SST1B
MCK-**-B- 51SST1
MCK-**-P- 51SST1
MCK-**-B- 51SST1A
MCK-**-P- 51SST1A
MCK-**-B- 51SST1B
MCK-**-P- 51SST1B
MCK-**-B-100SST1
MCK-**-S-100SST1
MCK-**-B-100SST1A
MCK-**-S-100SST1A
MCK-**-B-100SST1B
MCK-**-S-100SST1B
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
5-82
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
工商网监
湘ICP备2023018690号
