2-1617119-9

CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) MS, MSD, MSDD MS Sensitive TO-5 High Performance Relay Qualified to MIL-R-39016/11 MSD Sensitive TO-5 Diode Suppressed High Performance Relay Qualified to MIL-R-39016/16 – X1 X2 X1 A2 B2 A2 A1 B1 A1 B1 A1 A3 B3 B3 Product Facts n Suppression diode n High shock & vibration ratings n Hermetically sealed n High shock & vibration ratings n Spreader pads n Excellent RF switching Spreader pads Excellent RF switching B1 B3 Product Facts Hermetically sealed n B2 Terminal View n n X1 A3 Terminal View Product Facts + X2 B2 Terminal View Contact Arrangement — 2 Form C (DPDT) Contact Material — Stationary — Gold/platinum/palladium/silver alloy (gold plated) Moveable — Gold/platinum/palladium/silver alloy (gold plated) Contact Resistance — Before Life — 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life — 200 milliohms max. (measured @ 1 A @ 28 Vdc) Mechanical Life Expectancy — 1 million operations Coil Voltage — 5 to 48 Vdc Coil Power — 565 mW max. @ 25°C Duty Cycle — Continuous Pick-up Voltage — Approximately 50% of nominal coil voltage Pick-up Sensitivity — 60 mW max. @ 25°C – + X2 A2 A3 Electrical Characteristics MSDD Sensitive TO-5 Diode Suppressed/Protected High Performance Relay Qualified to MIL-R-39016/21 n Suppression & protection diodes n Hermetically sealed n High shock & vibration ratings n Spreader pads n Excellent RF switching Contact Ratings Contact Load 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc Operations Min. 100,000 100,000 100,000 100,000 100,000 1,000,000 50,000 Type Resistive Resistive (case not grounded) Resistive Inductive (0.32 Henry) Lamp Low Level Intermediate Current .335 (8.51) DIA MAX .370 (9.40) DIA MAX .031 ± .003 (0.79) .375 (9.53) MAX .035 (0.89) TERMINALS W 1.500 MIN (38.1) C .500 MIN (12.7) P .187±.010 (4.75±.25) (Length excludes mounting pad) OPTIONAL PINS .017+.002 (0.43) DIA .200 (5.08) DIA GROUND PIN (OPTIONAL) 36° ± 3° Header -.001 .370 (9.40) DIA MAX Enclosure 1-12 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) MS, MSD, MSDD (Continued) Environmental Characteristics Semiconductor Characteristics Timing — Operate Time — 4.0 ms max. Release Time — MS — 2.0 ms max. MSD/MSDD — 7.5 ms max. (suppression diode, suppression/ steering diodes) Contact Bounce — 1.5 ms max Dielectric Withstanding Voltage — Between Open Contacts — 500 Vrms 60 Hz Between Adjacent Contacts — 500 Vrms 60 Hz Between Contacts & Coil — 500 Vrms 60 Hz Insulation Resistance — 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) Temperature Range — -65°C to +125°C Weight — 0.12 oz. (3.40 grms) 0.13 oz. (3.45 grms) with spreader pad attached Vibration Resistance — 30 G’s, 10 to 3,000 Hz Shock Resistance — 75 G’s, 6 ±1 ms max. QPL Approval — MIL-R-39016/11 (JMS) MIL-R-39016/16 (JMSD) MIL-R-39016/21 (JMSDD) Diode — 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage .103 (2.62) 1 CII Low Signal Relays Operating Characteristics .156 (3.96) .014±.003 (0.36) .370 (9.40) SQ MAX .395 (10.03) SQ MAX .100 (2.54) 0.47 (1.19) DIA .150 (3.81) .100 (2.54) .100 (2.54) .140 – .175 DIA (3.56 – 4.45) S S2 Coil Data Nom. Coil Voltage (Vdc) MS/MSD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 MSDD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 W Spreader & Mounting Pads Coil Resistance in Ohms ±10% @ 25°C (Note 1) Coil Circuit Current mA (Max.) (Note 1&2) Coil Circuit Current mA (Min.) (Note 1&2) Pickup Voltage Vdc (Max.) @ 25°C (Note 2) Base Turn On Current mA (Max.) @ 25°C Pickup Voltage Vdc (Max.) @ 125°C (Note 2) Base Turn On Current mA (Max.) @ 125°C Drop-Out Voltage Vdc (Min.) @ 25°C (Note 2) Drop-Out Voltage Vdc (Min.) @ -65°C (Note 2) Nom. Coil Power (mW) @ 25°C Max. Coil Voltage Coil Desig. 100 200 400 850 1,600 3,300 6,500 11,000 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.6 3.4 4.85 7.0 9.8 14.0 20.0 25.8 n/a n/a n/a n/a n/a n/a n/a n/a 3.5 4.5 6.8 9.0 13.5 18.0 27.0 36.0 n/a n/a n/a n/a n/a n/a n/a n/a 0.23 0.28 0.55 0.64 0.92 1.4 1.8 2.4 0.12 0.18 0.35 0.41 0.59 0.89 1.25 1.60 250 180 203 169 203 213 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 64 125 400 850 1,600 3,300 6,500 11,000 78.1 48.9 23.6 15.0 12.2 8.8 6.1 4.8 56.8 36.3 18.1 11.7 9.6 7.0 4.9 3.9 2.9 4.0 6.1 7.8 11.3 15.2 21.7 27.8 n/a n/a n/a n/a n/a n/a n/a n/a 3.7 4.8 8.0 11.0 14.5 19.0 27.2 34.8 n/a n/a n/a n/a n/a n/a n/a n/a 0.8 0.9 1.1 1.3 1.5 1.7 2.3 2.8 0.7 0.8 0.9 1.0 1.1 1.3 1.7 2.0 391 288 203 169 203 213 199 209 7.0 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 Notes: 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. 2. Set base current at 3 mA to 15 mA during measurements. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Terminal Diodes Ground Pins Coils Spreader/Mounting Pads MS C D G -26 S * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-13 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com