2-1617541-3

CII Low Signal Relays Single Pole, Electrically Held, 1 Amp and Less (Continued) 1MS, 1MSD, 1MSDD 1MS Sensitive TO-5 High Performance Relay Qualified to MIL-R-39016/10 A2 X1 1MSD Sensitive TO-5 Diode Suppressed High Performance Relay 1MSDD Sensitive TO-5 Diode Suppressed/Protected High Performance Relay Qualified to MIL-R-39016/25 Qualified to MIL-R-39016/26 A2 X1 X2 A2 + X1 X2 – A1 A3 Contact Arrangement — 1 Form C (SPDT) Contact Material — Stationary — Gold/platinum/palladium/silver alloy (gold plated) Moveable — Gold/platinum/palladium/silver alloy (gold plated) Contact Resistance — Before Life — 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life — 200 milliohms max. (measured @ 1 A @ 28 Vdc) Mechanical Life Expectancy — 1 million operations Coil Voltage — 5 to 40 Vdc Coil Power — 506 mW max. @ 25°C Duty Cycle — Continuous Pick-up Voltage — Approximately 50% of nominal coil voltage Pick-up Sensitivity — 40 mW max. @ 25°C A1 Terminal View Product Facts Electrical Characteristics – A3 A1 Terminal View Product Facts Product Facts Hermetically sealed n Suppression diode n High shock & vibration ratings n Hermetically sealed n High shock & vibration ratings n Spreader pad n Excellent RF switching Spreader pad n Excellent RF switching A3 Terminal View n n + X2 n Suppression & protection diodes n Hermetically sealed n High shock & vibration ratings n Spreader pad n Excellent RF switching Contact Ratings Contact Load 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc Operations MINd. 100,000 100,000 100,000 100,000 100,000 1,000,000 50,000 Type Resistive Resistive (case not grounded) Resistive Inductive (0.32 Henry) Lamp Low Level Intermediate Current .335 (8.51) DIA MAX .370 (9.40) DIA MAX .031 ± .003 (0.79) .375 (9.53) MAX TERMINALS W 1.500 MINd (38.1) C .500 MINd (12.7) P .187±.010 (4.75±.25) (Length excludes spreader pad) .035±.010 (0.89) .200 (5.08) DIA 45° ± 3° .017+.002 (0.43) DIA 1MS/1MSD/1MSDD Header -.001 .370 (9.40) DIA MAX 1MS/1MSD/1MSDD Enclosure 1-4 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com ± ± 3° CII Low Signal Relays Single Pole, Electrically Held, 1 Amp and Less (Continued) Operating Characteristics Environmental Characteristics Semiconductor Characteristics (Continued) Timing — Operate Time — 4.0 ms max. Release Time — 1MS — 2.5 ms max. 1MSD/1MSDD — 7.5 ms max. (suppression diode, suppression/ steering diodes) Contact Bounce — 1.5 ms max Dielectric Withstanding Voltage — Between Open Contacts — 500 Vrms 60 Hz Between Adjacent Contacts — 500 Vrms 60 Hz Between Contacts & Coil — 500 Vrms 60 Hz Insulation Resistance — 10,000 megohms @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) Temperature Range — -65°C to +125°C Weight — 0.10 oz. (2.84 grms) 0.11 oz. (3.09 grms) with spreader pad attached Vibration Resistance — 30 G’s, 10 to 3,000 Hz Shock Resistance — 75 G’s, 6 ±1 ms max. QPL Approval — MIL-R-39016/10 (J1MS) MIL-R-39016/25 (J1MSD) MIL-R-39016/26 (J1MSDD) Diode — 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage 1 CII Low Signal Relays 1MS, 1MSD, 1MSDD .103 (2.62) .014±.003 (0.36) 0.47 (1.19) DIA .370 (9.40) SQ MAX .100 (2.54) .100 (2.54) S W .140 – .175 DIA (3.56 – 4.45) Spreader & Mounting Pads Coil Data Nom. Coil Voltage (Vdc) 1MS/1MSD 5.0 6.0 9.0 12.0 18.0 26.5 32.0 40.0 1MSDD 5.0 6.0 9.0 12.0 18.0 26.5 32.0 40.0 Coil Resistance in Ohms ±10% @ 25°C (Note 1) Coil Circuit Current mA (Max.) (Note 1&2) Coil Circuit Current mA (MINd.) (Note 1&2) Pickup Voltage Vdc (Max.) @ 25°C (Note 2) Base Turn On Current mA (Max.) @ 25°C Pickup Voltage Vdc (Max.) @ 125°C (Note 2) Drop-Out Drop-Out Nom. Coil Base Turn Voltage Voltage On Current Vdc Power (MINd.) Vdc (MINd.) mA (Max.) (mW) @ 25°C @ -65°C @ 125°C @ 25°C (Note 2) (Note 2) 125 255 630 1,025 2,300 4,000 6,500 11,000 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.8 3.5 5.3 7.0 10.5 14.2 18.7 23.3 n/a n/a n/a n/a n/a n/a n/a n/a 3.7 4.5 6.8 9.0 13.5 18.0 24.0 30.0 n/a n/a n/a n/a n/a n/a n/a n/a 0.23 0.28 0.54 0.63 0.91 1.37 1.59 2.0 0.15 0.18 0.35 0.40 0.59 0.89 1.0 1.3 100 200 630 1,025 2,300 4,000 6,500 11,000 50.0 30.6 15.0 12.5 8.5 7.2 5.4 4.0 36.3 22.7 11.5 9.7 6.7 5.7 4.3 3.2 3.5 4.1 6.3 8.0 11.6 15.4 17.0 22.0 n/a n/a n/a n/a n/a n/a n/a n/a 4.5 5.5 7.8 10.0 14.5 19.0 21.0 27.0 n/a n/a n/a n/a n/a n/a n/a n/a 0.23 0.28 0.54 0.63 0.91 1.37 1.5 2.0 0.15 0.18 0.35 0.40 0.58 0.89 0.95 1.28 Max. Coil Voltage Coil Desig. 200 141 129 140 141 176 158 145 8.0 11.0 12.0 22.0 24.0 45.0 57.0 75.0 5 6 9 12 18 26 32 40 250 180 129 140 141 176 158 145 8.0 11.0 16.0 22.0 33.0 45.0 57.0 75.0 5 6 9 12 18 26 32 40 Notes: 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. 2. Set base current at 3 mA to 15 mA during measurements. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Terminal Diodes Coils 1MS C D -26 Spreader/Mounting Pads S * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-5 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com