2-1623708-3

METAL GLAZE FIXED RESISTORS TYPE RGP SERIES INTRODUCTION TE Connectivity (TE)’s metal glaze resistors are manufactured using thick film techniques. The ceramic slugs are printed with thick film, fired, and end caps are pressure fitted onto the slugs. The resistive element is then spiralled to the required value and lead wires are welded onto the end caps. The metal glaze element enables much higher resistance values to be manufactured compared to metal film resistors, whilst maintaining the high stability recognised in those resistors, and giving additional resistance to environmental & overload conditions. FEATURES • Similar characteristics to metal film resistors, but with a much higher resistance value capability. • Metal-glaze elements provide high stable performance against environmental conditions and overload. • Resistance to heat, humidity, and solvents. CHARACTERISTICS – ELECTRICAL Characteristic RGP0207CH RGP50 RGP100 RGP200 0.25 0.5 1 2 Minimum 47KΩ 47KΩ 47KΩ 47KΩ Maximum 1GΩ 1GΩ 1GΩ 1GΩ Rated power@70°C (W) Resistance Range (ohms) Tolerance (%) ±1%, ±5%, 10% Code Letter F = ±1%, J = ±5%, K = 10% Temp. Coefficient Max (ppm/°C) ±200ppm/°C Maximum Working Voltage (VDC) 1600 3500 5000 10000 Maximum Overload Voltage (VDC) 3200 7000 10000 20000 Operating Temp. Range (°C) Dielectric Strength (V) Insulation Resistance (Mohms) Note: • Resistance values over 510MΩ (≧510MΩ), the tolerance shall be ±10%. • RGP 1W and RGP 2W are coated in flame resistant paint. -65°C to 175°C 350 1000MΩ METAL GLAZE FIXED RESISTORS RGP Series DERATING CURVE For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve. SURFACE TEMPERATURE RISE INDUSTRIAL / RGP RESISTOR SERIES 2 METAL GLAZE FIXED RESISTORS RGP Series ENVIRONMENTAL CHARACTERISTICS Characteristic Resistance temperature coefficient Power rating load Specification Test Method ±200PPM/°C -65°C to 175°C Surface temp. 175°C Max. Rated voltage for 30 minutes Short time overload Dielectric withstand voltage ±1% 2.5 times of rated voltage for 5 seconds No evidence of mechanical damage or insulation breakdown AC 350V for 1 minute 1000MΩ DC100V megger ΔR/R≦±2% IEC 60065 14.1 No evidence of mechanical damage. < 1/2W : 1 kg > 1W : 2.5kg Minimum 95% coverage 235±5°C for 2 seconds No evidence of mechanical damage. ΔR/R≦±1% 270±5°C for 10 ± 1 second 350±10°C for 3.5 ± 0.5 seconds Insulation resistance Pulse loading capability Terminal strength Solderability Resistance to soldering heat Temp. cycle 1 cycle: 30 minutes @ -55°C 3 minutes @ room temperature 30 minutes @ 175°C 3 minutes @ room temperature ΔR/R≦±0.5% Total cycles : 5 Load life ΔR/R≦±3% Rated power load 90 minutes ON 30 minutes OFF 70°C 1000 hours -0/+48 hours Load life in humidity ΔR/R≦±3% Rated power load 90 minutes ON 30 minutes OFF 40°C 95% RH 500 hours -0/+24 hours Nonflammability Not flamed 16 times of rated wattage for 5 min. (RT 1W & RT 2W) DIMENSIONS (UNIT: mm) Type RGP0207CH D±1 L±1 H ± 0.1 d ± 0.20 2.4±0.5 6.4 28 0.6 RGP50 3.5 9 28 0.65 RGP100 4.5 11 28 0.8 RGP200 5.0 15 28 0.8 INDUSTRIAL / RGP RESISTOR SERIES 3 METAL GLAZE FIXED RESISTORS RGP Series PULSE LOADING CAPABILITIES In accordance with IEC 60065 chapter 14.1; 50 discharges from a 1 nF capacitor charged to Vmax; 12 discharges/minute (drift ΔR/R≦ 2%) COATING AND MARKING Coating consists of 3 layers of non-flammable silicone resin for RGP100 and RGP200 and 1 layer of phenolic resin and 3 layers of epoxy resin for RGP0207CH and RGP50 Resistors are marked on resistor surface with four band colour code. PACKAGING Taping specification Type Size Type A B C±1 D Max E Max RGP0207CH T-52 52±1 5±0.5 6 0.6 1.2 RGP50 T-52 52±1 5±0.5 6 0.6 1.2 RGP100 T-63 63±1 5±0.5 6 0.6 1.2 RGP200 T-63 63±1 10±1 6 0.6 1.2 BOX SPECIFICATION Type Package A B C Qty Per Box RGP0207CH T/B 75 100 255 5000 RGP50 T/B 75 55 255 1000 RGP100 T/B 85 105 260 1000 RGP200 T/B 85 105 260 1000 INDUSTRIAL / RGP RESISTOR SERIES 4 PRODUCT CODE STRUCTURE Part Number RGP 50 J Common Part RGP 100R Resistance Value 100R Metal Glaze Fixed Resistors 100Ω 1K0 1,000Ω 100K Option 100,000Ω 0207CH 0.25W 50 0.5W 100 1W J 1% 2W F 5% K 10% 200 Tolerance PRODUCT INFORMATION TCPN Catalogue Number Description 1623708-1 RGP0207CHJ100M RGP0207CH 5% 100M 1623708-2 RGP0207CHJ10M RGP0207CH 5% 10M 1623708-3 RGP0207CHJ15M RGP0207CH 5% 15M 1623708-5 RGP0207CHJ22M RGP0207CH 5% 22M 1623708-6 RGP0207CHJ33M RGP0207CH 5% 33M 1623708-7 RGP0207CHJ470M RGP0207CH 5% 470M 5K PK 1623708-8 RGP0207CHJ47M RGP0207CH 5% 47M 1-1623708-0 RGP0207CHJ68M RGP0207CH 5% 68M 1-1623708-1 RGP0207CHJ82M RGP0207CH 5% 82M 1-1623708-2 RGP0207CHK1G0 RGP0207CH 10% 1G0 2-1623708-1 RGP0207CHJ27M RGP0207CH 5% 27M 2-1623708-3 RGP0207CHJ130M RGP0207CH 5% 130M 2-1623708-5 RGP0207CHJ150M RGP0207CH 5% 150M te.com ©2023 TE Connectivity. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 1773267 REV:D 07/23    ED INDUSTRIAL / RGP RESISTOR SERIES