2-1649328-2

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1-AP n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact coil 400mW n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85°C n WG version: product in accordance to IEC 60335-1 n Sensitive Typical applications Boiler control, timers, garage door control, POS automation, interface modules Approvals Technical data of approved types on request 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400VAC Rated current 12A 16A Limiting continuous current 12A 16A, UL: 20A Limiting making current max. 4s, duty factor 10% 25A 30A Breaking capacity max. 3000VA 4000VA Contact Material AgNi 90/10 Frequency of operation, with/without load 360/72000h-1 Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Contact ratings Type Contact Load Cycles IEC 61810 RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103 RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103 RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103 RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103 RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103 UL 508 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103 RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x103 RT314 A (NO) 1hp, 240VAC, 40°C 1x103 EN60947-5-1 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 EN60730-1 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103 Mechanical endurance 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company VZb Coil Data VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Contact Data F0144-C >30x106 operations Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.5 006 6 4.2 009 9 6.3 012 12 8.4 024 24 16.8 048 48 33.6 5 to 110VDC 2 class F Release voltage VDC 0.5 0.6 0.9 1.2 2.4 4.8 Coil resistance Ω±10% 62 90 200 360 1440 5520 Rated coil power mW 403 400 400 400 400 417 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1000Vrms 5000Vrms ≥10/10mm IIIa PTI 250V Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1-AP (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter China RoHS compliance no hazardous material over threshold Resistance to heat and fire WG version according EN60335, par30 Ambient temperature -40 to 85°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270°C/10s RTIII 260°C/5s Packaging/unit tube/20 pcs., box/500 pcs. Accessories For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Dimensions S0272-BB PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid pattern from 2.5​mm to 2.54​mm can be used. Bottom view on solder pins 12​A, pinning 3.5​mm 12​A, pinning 5​mm S0418-CB 1 form C (CO) contact S0418-CN 1 form C (CO) contact S0163-BG 1 form A (NO) contact 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company S0418-CA 1 form C (CO) contact S0163-BC 1 form A (NO) contact S0163-BH 2 16​A, pinning 5​mm Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. S0163-BE 1 form A (NO) contact S0163-BD Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions S0163-BF Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1-AP (Continued) Product code structure Typical product code Type RT Power PCB Relay RT1 Version 1 12A, pinning 3.5mm, flux proof 2 12A, pinning 5mm, flux proof *) 3 16A, pinning 5mm, flux proof B 12A, pinning 3.5mm, wash tight D 16A, pinning 5mm, wash tight Contact arrangement 1 1 form C (CO) contact 3 1 form A (NO) contact Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version AP Standard version WGAP Product in accordance with IEC 60335-1 (domestic appliances) RT 3 1 4 024 AP *) Wash tight version on request Product code Version Contacts Contact material Coil Version RT114024AP 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 24VDC standard RT134024AP flux proof 1 form A (NO) RT214024AP 12A, pinning 5mm, 1 form C (CO) RT234024AP flux proof 1 form A (NO) RT314012AP 16A, pinning 5mm, 1 form C (CO) 12VDC RT314012WGAP flux proof contact IEC60335-1 compliant RT314024AP 24VDC standard RT314048AP 48VDC RT334012AP 1 form A (NO) 12VDC RT334024AP contact 24VDC RTD14012AP 16A, pinning 5mm, 1 form C (CO) 12VDC RTD14024AP wash tight contact 24VDC RTD34012AP 12VDC RTH34012AP 16A, 105°C, 5mm, 1 form A (NO) RTH34012WGAP wash tight contact IEC60335-1 compliant This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1-1649326-5 3-1649326-3 1-1649327-5 3-1649327-3 1-1649328-3 5-1833002-0 1-1649328-5 1-1649328-6 3-1649328-1 3-1649328-3 1649328-4 1649328-6 2-1649328-2 1-1649357-3 5-1833004-0 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3