2-2170747-1

QSFP28/56 and zQSFP+ Interconnects TE Connectivity’s (TE) Quad Small Form-Factor Pluggable (QSFP28/56) and z-Quad Small Form-Factor Pluggable Plus (zQSFP+) interconnects offer increased data rates of 28 Gbps NRZ and 56 Gbps PAM-4 in an industry standard, scalable design that allows for backwards compatibility with QSFP+ cables and transceivers, providing a simple upgrade path from 10 Gbps to 28 Gbps and 56 Gbps. The complete portfolio of interconnects deliver a large range of simple and customizable design options to meet most customer requirements. TE’s zQSFP+ interconnects are dual sourced with Molex, LLC. Key Features Key Benefits • • • • Data transfer rates of 28 Gbps NRZ and 56 Gbps PAM-4 Supports Ethernet and InfiniBand (IB) Enhanced Data Rate (EDR) requirements Supports single, dual and quad channel implementations • • • Superior signal integrity and EMI protection through 56 Gbps Industry standard interface Backwards compatible with QSFP+ cables and transceivers Comprehensive product portfolio Applications Applications By Protocol • • • • • • • • Network interface Switches Servers Routers Wireless Base Stations Test and Measurement Equipment • • • DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS 50, 100 and 200 Gigabit Ethernet 100 Gbps Infiniband (IB) Enhanced Data Rate (EDR) requirements 128G Fibre Channel 25G/50G Consortium 28G NRZ and 56G PAM-4 QSFP28/56 and zQSFP+ Interconnects Enhanced QSFP28/56 and zQSFP+ Cages EMI Enhanced Thermally Enhanced External riding heatsink High-performance springs are both flexible and strong Improved springs more fully seal connector from EMI Internal riding heatsink Reference base part number 2170709 on page 7 Lower Assembly Insertion Force Improved EMI Performance Help increase assembly throughput by providing a 55% reduction in force needed to insert the line card into the front bezel. The reduction in insertion force makes assembly easier, faster, and reduces the risk for damage which can lead to reduced EMI performance. EMI sealing enhancements on these new cages provide 10 dB EMI performance improvement over current QSFP28 products. Intel Omni-Path Architecture Air vent holes Reference base part numbers 2299940, 2299870, 2299924, 2321666 and 2321630 on page 7 Lower Port Cooling Optimized Airflow Internal riding heatsink in the seperator plate area provides enhanced cooling to the lower ports and a 12-15oC improvement over standard stacked zQSFP+ cages. External riding heatsinks on the upper port are optimized for airflow direction (also available without heatsinks). Air vent holes allow for air to pass through and exit out the sides and rear of the cage. Stacked Belly-to-Belly Image source: Intel Image source: Intel Reference part numbers 2227670-7, 2300281-1, 2170704-1 and 1551920-2 on page 7 Reference base part numbers 2314790, 2308171 and 2315050 on page 7 Designed for Intel Omni-Path Architecture High Density Low Cost These QSFP28/56 and zQSFP+ 2x2 and 1x2 cages are specifically designed for Intel OmniPath Architecture (OPA) switch architectures, and 1x1 QSFP28/56 cages for OPA NIC cards. Designing with these cages allows access to proven technology to support high performance applications. Certain stacked cages can be used in belly-to-belly applications to support high density 2RU+ box designs and switch designs using next-gen 48 and 64 silicon ports. Using a stacked belly-tobelly design enables single PCB architecture versus two PCBs per line card, saving significant system costs. DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS PAGE 2 QSFP28/56 and zQSFP+ Interconnects 1xN QSFP28/56 Mechanical Options Bezel Mount • Behind bezel cages use a gasket applied by the customer to the cage or bezel sheet metal • EMI spring versions and gasket versions share the same PCB footprint and bezel cutout • TE offers low insertion force EMI springs to assist in assembly of high density products Through Bezel with EMI Springs Through Bezel with EMI Gasket Behind Bezel (customer applies gasket) Lightpipe Options Single Dual • TE offers 1, 2 or 4 lightpipe options per port • Standard lightpipes are designed to support up to 1.00mm height 0805 style LEDs • Lightpipes are shipped with an organizer to prevent optical cross-talk Quad Heat Sink Styles • TE offers SAN, LAN and Networking height heatsinks • Custom heatsinks are available upon request • Height is max height of assembly from PCI (13.7mm height) SAN (16.0mm height) NET (23.0mm height) surface of PCB Rear EONs 2 rear EONs 1 rear EONs 0 rear EON’s DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS • Rear pins are used to improve EMI grounding and cage retention to the PCB • TE offers all styles outlined in the SFF-8662 footprint • Rear EONs will be dependent upon the customer’s routing preference and technical specifications PAGE 3 QSFP28/56 and zQSFP+ Interconnects 2xN zQSFP+ Mechanical Options Bezel Mount • Through bezel assemblies with EMI springs or EMI gaskets are available • Custom gasketing options are available upon request Through Bezel with EMI Springs Through Bezel with EMI Gasket Lightpipe Options Single (per port) Dual (per port) • TE offers zero, single and dual lightpipe options per port • For higher lightpipe counts, the customer may add lightpipes underneath their PCB to indicate lower port activity • The thermal footprint design offers 4x lightpipes assembled above the cage • Lightpipes are designed to support up to 0.80mm height 0805 style LEDs Rear EONs • Rear pins are used to improve EMI grounding and cage retention to the PCB • TE offers zero or three rear pins per port column • Rear EONs will be dependent upon the customer’s routing preference and technical specifications 3 rear EONs DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS 0 rear EONs PAGE 4 QSFP28/56 and zQSFP+ Interconnects Part Number Detail Cages Base Part Number Ports Cage Applications EMI Suppression Lightpipes Applied Per Port Single Dual Quad Heat Sinks NET Applied PCI SAN 2170754 1x1 Through Bezel EMI Gasket Yes Yes Yes Yes Yes Yes 2170705 1x1 Through Bezel EMI Springs Yes Yes Yes Yes Yes Yes 2170773 1x1 Through Bezel EMI Springs Yes Yes Yes No No No 2170753 1x1 Through Bezel EMI Gasket No No No Yes Yes Yes 2170752 1x1 Through Bezel EMI Gasket No No No No No No 2170704 1x1 Through Bezel EMI Springs No No No Yes Yes Yes 2170703 1x1 Through Bezel EMI Springs No No No No No No 1551892 1x1 Behind Bezel C No No No Yes Yes Yes 1551891 1x1 Behind Bezel C No No No No No No 2170814 1x2 Through Bezel EMI Gasket Yes Yes Yes Yes Yes Yes 2170813 1x2 Through Bezel EMI Gasket Yes Yes Yes No No No 2170808 1x2 Through Bezel EMI Springs Yes Yes Yes Yes Yes Yes 2170807 1x2 Through Bezel EMI Springs Yes Yes Yes No No No 2170812 1x2 Through Bezel EMI Gasket No No No Yes Yes Yes 2170811 1x2 Through Bezel EMI Gasket No No No No No No 2170806 1x2 Through Bezel EMI Springs No No No Yes Yes Yes 2170805 1x2 Through Bezel EMI Springs No No No No No No 2227103 1x2 Behind Bezel C Yes Yes No Yes Yes Yes 2227103 1x2 Behind Bezel C No No No Yes Yes Yes 2227104 1x2 Behind Bezel C No No No 2170769 1x3 Through Bezel EMI Gasket Yes Yes Yes Yes Yes Yes 2170740 1x3 Through Bezel EMI Springs Yes Yes Yes Yes Yes Yes Open Top 2170739 1x3 Through Bezel EMI Springs Yes Yes Yes No No No 2170768 1x3 Through Bezel EMI Gasket No No No Yes Yes Yes 2170767 1x3 Through Bezel EMI Gasket No No No No No No 2170738 1x3 Through Bezel EMI Springs No No No Yes Yes Yes 2170737 1x3 Through Bezel EMI Springs No No No No No No 2173239 1x3 Behind Bezel C No No No Yes Yes Yes 2173238 1x3 Behind Bezel C No No No Open Top 2170785 1x4 Through Bezel EMI Gasket Yes Yes Yes Yes Yes Yes 2170784 1x4 Through Bezel EMI Gasket Yes Yes Yes No No No 2170747 1x4 Through Bezel EMI Springs Yes Yes Yes Yes Yes Yes 2170746 1x4 Through Bezel EMI Springs Yes Yes Yes No No No Part Number 1551920-2: zQSFP+ Surface Mount Connector for use with all 1xN QSFP28/56 cages DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS Notes: C = Customer Applied Gasket 1xN cages: require a SMT connector to complete the assembly 2xN cages: connectors and cages come as one integrated assembly All cages use EMI Plug 1888810-2 PAGE 5 QSFP28/56 and zQSFP+ Interconnects Cages (con’t) Enhanced Base Part Number Ports Cage Applications EMI Suppression Lightpipes Applied Per Port Heat Sinks Applied Single Dual Quad NET PCI SAN Yes 2170783 1x4 Through Bezel EMI Gasket No No No Yes Yes 2170782 1x4 Through Bezel EMI Gasket No No No No No No 2170745 1x4 Through Bezel EMI Springs No No No Yes Yes Yes 2170744 1x4 Through Bezel EMI Springs No No No No No No 2227249 1x4 Behind Bezel C No No No Yes Yes Yes 2227250 1x4 Behind Bezel C No No No 2315050 1x2 Behind Bezel EMI Springs No No Yes 2170790 1x4 Through Bezel EMI Springs No No Yes 2299940 2x1 Through Bezel EMI Springs Yes Yes No Custom Height 2321666 2x1 Through Bezel EMI Springs Yes Yes No Single Piece Press Fit 2299870 2x2 Through Bezel EMI Springs Yes Yes No Custom Height 2321630 2x2 Through Bezel EMI Springs Yes Yes No Single Piece Press Fit 2299924 2x3 Through Bezel EMI Springs Yes Yes No Custom Height 2227670 2x2 Belly-to-Belly EMI Springs No No No No No No 2300281 1x2 Belly-to-Belly EMI Springs No No No No No No 2314790 2x1 Belly-to-Belly EMI Springs Yes Yes Yes No No No 2308171 2x2 Belly-to-Belly EMI Springs Yes Yes Yes No No No 2170708 1x6 Through Bezel EMI Springs Yes Yes Yes Yes Yes Yes 2170734 1x6 Through Bezel EMI Springs Yes Yes Yes No No No 2170707 1x6 Through Bezel EMI Springs No No No Yes Yes Yes 2170706 1x6 Through Bezel EMI Springs No No No No No No 2334626-1 1x6 Behind Bezel C No No No No No Yes 2334626-2 1x6 Behind Bezel C No No No No No Yes 2198373 2x1 Through Bezel EMI Gasket 0/1 No No No 2227224 2x1 Through Bezel EMI Gasket 0/1 No No No 2287054 2x1 Through Bezel EMI Gasket 2 No No No 2227666 2x1 Through Bezel EMI Springs 0/1 No No No 2227669 2x1 Through Bezel EMI Springs 0/1 No No No 2227669 2x1 Through Bezel EMI Springs 2 No No No 2170608 2x1 Through Bezel EMI Gasket 2** 2214593 2x2 Through Bezel EMI Gasket 0/1 No No No 2227225 2x2 Through Bezel EMI Gasket 0/1 No No No 2287054 2x2 Through Bezel EMI Gasket 2 No No No 2227667 2x2 Through Bezel EMI Springs 0/1 No No No 2227670 2x2 Through Bezel EMI Springs 0/1 No No No 2289129 2x2 Through Bezel EMI Springs 2 No No No 2214565 2x3 Through Bezel EMI Gasket 0/1 No No No 2227226 2x3 Through Bezel EMI Gasket 0/1 No No No 2287054 2x3 Through Bezel EMI Gasket 2 No No No 2227668 2x3 Through Bezel EMI Springs 0/1 No No No 2227671 2x3 Through Bezel EMI Springs 0/1 No No No 2227671 2x3 Through Bezel EMI Springs 2 No No No 2170610 2x3 Through Bezel EMI Gasket 1/2** Part Number 1551920-2: zQSFP+ Surface Mount Connector for use with all 1xN QSFP28/56 cages Notes: DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS Open Top No No No Custom Height Thermal Footprint Thermal Footprint C = Customer Applied Gasket 1xN cages: require a SMT connector to complete the assembly 2xN cages: connectors and cages come as one integrated assembly All cages use EMI Plug 1888810-2 PAGE 6 QSFP28/56 and zQSFP+ Interconnects Accessories Type Surface Mount Connector Description Part Number(s) zQSFP+ SMT connector (For use with all 1xN QSFP28/56 cages) 1551920-2 1x1 Heat Sink Clip 2007304-5 1xN Heat Sink Clip 2227644-3, -4, -6 1x1 Single Lightpipe 2173481-1 1xN Single Lightpipe 2173482-1, -2, -3, -7 1x1 Heats Sink Clip 2007304-5 1xN Heat Sink Clip 2227644-3, -4, -6 1x1 Single Lightpipe 2170720-1 1x1 Dual Lightpipe 2170762-1 1x1 Quad Lightpipe 2170777-1 1xN Single Lightpipe 2170720-1 1xN Dual Lightpipe 2170761-1 1xN Quad Lightpipe 2170762-1 Behind Bezel Through Bezel Specifications 1xN QSFP28/56 cages and zQSFP+ SMT connector • Cage and Connector Product Spec: 108-19428 • zQSFP+ SMT Connector Application Spec: 114-32022 • QSFP28/56 Cage Assembly Applications Spec: 114-32023 2xN Stacked zQSFP+ • Product Spec: 108-60102 • Application Spec: 114-60015 DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS PAGE 7 QSFP28/56 and zQSFP+ Interconnects Direct Attach Copper Cable Assemblies TE’s QSFP28 and QSFP56 passive copper cable assemblies feature eight differential copper pairs, providing four data transmission channels at speeds up to 28 Gbps NRZ and 56 Gbps PAM-4, and meet 100G Ethernet, 200G Ethernet and Infiniband Enhanced Data Rate (EDR) requirements. Offered in a broad range of wire gauges – from 32AWG up to 26AWG – this 100G copper cable assembly features low insertion loss and low cross talk. This next generation cable assembly shares the same mating interface with QSFP+ and QSFP28 form factors, making it backward compatible with existing QSFP ports. QSFP28 and QSFP56 form factors can be used with current 40G, 100G and 200G applications with substantial signal integrity margin. Features and Benefits • Compatible with IEEE 802.3cd, IEEE 802.3bj, IEEE 802.3by and InfiniBand EDR • Optimized construction to minimize insertion loss and cross talk • Customized 360° cable braid termination limits EMI radiation • Compatible with all existing QSFP connectors and cages • Pull-to-release slide latch design • 32AWG up to 26AWG • Straight and breakout assembly configurations available • Customizable EEPROM mapping for cable signature • RoHS compliant • Low smoke zero halogen options available by request • Contact your TE Representative for customized lengths DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS PAGE 8 QSFP28/56 and zQSFP+ Interconnects Part Number Detail QSFP28 Cable Assemblies Base Part Number Description 2336313 2333393 2333841 QSFP28 to QSFP28 Straight Assembly AWG Dash to Length (meters) 0.5 1 1.5 2 2.5 3 32 -1 -2 -3 -4 30 -1 -3 -4 28 -1 -2 -5 -6 -7 -3 -4 -5 2333842 26 -1 -2 -3 -4 2340655 32 -1 -2 -3 -4 3.5 4 -6 -7 -8 -5 -6 -7 -8 2333801 QSFP28 to 2xQSFP28 30 -1 -2 -3 -4 -5 -6 2333843 Breakout Cable 28 -1 -2 -3 -4 -5 -6 -7 -8 2333844 26 -1 -2 -3 -4 -5 -6 -7 -8 2340654 32 -1 -2 -3 -4 2334236 QSFP28 to 4xSFP28 30 -1 -2 -3 -4 2334877 Breakout Cable 28 -1 -2 -3 -4 -5 -6 -7 -8 26 -1 -2 -3 -4 -5 -6 -7 -8 0.5 1 1.5 32 -41 -42 -43 30 -41 -43 -44 -45 28 -41 -42 -43 -44 -45 2333841 26 -41 -42 -43 -44 -45 2340655 32 -41 -42 -43 2334878 4.5 5 -9 -10 -9 -10 -9 -10 QSFP56 Cable Assemblies Base Part Number Description 2336313 2333393 2333841 QSFP56 to QSFP56 Straight Assembly AWG Dash to Length (meters) 2 2.5 2333801 QSFP56 to 2xQSFP56 30 -41 -42 -43 -44 2333843 Breakout Cable 28 -41 -42 -43 -44 -45 2333844 26 -41 -42 -43 -44 -45 2340654 32 -41 -42 -43 2334236 QSFP28 to 4xSFP56 30 -41 -42 -43 -44 2334877 Breakout Cable 28 -41 -42 -43 -44 -45 26 -41 -42 -43 -44 -45 2334878 DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS 3 -46 -46 -46 PAGE 9 QSFP28/56 and zQSFP+ Interconnects Frequently Asked Questions What data rates do QSFP28/56 and zQSFP+ support? These products provide four data transmission channels at speeds up to 28 Gbps NRZ and 56 Gbps PAM-4 per channel. Is TE’s footprint compatible with other suppliers? TE’s 1xN QSFP28/56 cages are designed to SFF-8663 and are industry standard. TE’s zQSFP+ SMT connector and 2xN assemblies are dual sourced with Molex, LLC. Are heat sinks available? Yes, TE offers a generous portfolio of heat sink heights and styles, as well as custom heat sinks upon request. Is application tooling required? Single port cage assemblies require only flat-rock tooling, while 1xN and stacked assemblies normally require specific application tooling. For More Information TE Technical Support Center USA: 1.800.522.6752 Canada: 1 .905.475.6222 Mexico: 52.0.55.1106.0800 Latin/S. America: 54.0.11.4733.2200 Germany: 49.0.6251.133.1999 UK: 44.0.800.267666 France: 33.0.1.3420.8686 Netherlands: 31.0.73.6246.999 China: 86.0.400.820.6015 te.com/products/qsfp © 2019 TE Connectivity Ltd. family of companies. All Rights Reserved. TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. zQSFP+ is a part of the ZXP® family of connectors and uses ZXP technology. ZXP is a trademark of Molex, LLC. 5-1773463-0 DND 05/2019 While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. DATA AND DEVICES /// QSFP28/56 AND zQSFP+ INTERCONNECTS