2-2316510-1
LUMAWISE DRIVE Z50, 0-10V, 0.7A, 24X24
2-2316510-1
OBSOLETE
LUMAWISE | LUMAWISE LED Holders
TE Internal #: 2-2316510-1
TE Internal Description: LUMAWISE DRIVE Z50, 0-10V, 0.7A, 24X24
LUMAWISE Drive Type Z50: Dimmable Series
View on TE.com >
Connectors > Lighting Connectors > LED Holders > LUMAWISE Drive Type Z50: Dimmable Series
Compatible LED: Bridgelux V18, Soleriq19 series
Lighting Connector Features Included: Dimmable (Linear Profile), Driver on Board, Enables Zhaga Compatibility, Not
Programmable, Optic Compatible, Thermal Protection
Operating Voltage: 48 VDC
Termination Method to Wire & Cable: Mini CT Connector
Connector System: Wire-to-Device
All LUMAWISE Drive Type Z50: Dimmable Series (0)
Features
Product Type Features
LED Holders Product Type
LED Holder
COB Substrate Thickness
1 mm
Connector System
Wire-to-Device
Configuration Features
Lighting Connector Features Included
Dimmable (Linear Profile), Driver on Board,
Enables Zhaga Compatibility, Not
Programmable, Optic Compatible, Thermal
Protection
Number of Positions
2
Electrical Characteristics
Operating Voltage
48 VDC
Body Features
Compatible LED
Contact Features
For support call+1 800 522 6752
Bridgelux V18, Soleriq19 series
01/02/2024 08:48PM | Page 1
2-2316510-1
LUMAWISE DRIVE Z50, 0-10V, 0.7A, 24X24
Contact Features
Contact Mating Area Plating Material
Gold
Contact Base Material
Copper Alloy
Termination Features
Termination Method to Wire & Cable
Mini CT Connector
Housing Features
Housing Material
PBT
Usage Conditions
Operating Temperature Range
0 – 125 °C[32 – 257 °F]
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU
Compliant with Exemptions
EU ELV Directive 2000/53/EC
Not Yet Reviewed
China RoHS 2 Directive MIIT Order No 32, 2016
Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006
Current ECHA Candidate List: JUNE 2023
(235)
Candidate List Declared Against: JUL 2017
(174)
SVHC > Threshold:
Not Yet Reviewed
Halogen Content
Not Yet Reviewed for halogen content
Solder Process Capability
Not reviewed for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for
substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be
updating its statements accordingly.
Also in the Series LUMAWISE LED Holders
For support call+1 800 522 6752
01/02/2024 08:48PM | Page 2
2-2316510-1
LUMAWISE DRIVE Z50, 0-10V, 0.7A, 24X24
Also in the Series LUMAWISE LED Holders
LED Holders(79)
Customers Also Bought
TE Part #1-440055-1
TE Part #1623804-8
TE Part #TAA545B1411-060
TE Part #8-2176407-8
2.0MM,HDR,11POS,R/A
SQZ10 3R3 5% WIRE
M12A4-MS-FS-PVC-6.0M
3560 27R 5%
TE Part #4-2176414-8
TE Part #4-1879350-2
TE Part #8-1419125-5
TE Part #1-1393250-7
7W STD M/OX 5% 1K8
RR01 5% 11R AMMO
SDT-S-106LMR,000
W28-XQAT-15=W28
Documents
CAD Files
3D PDF
3D
Customer View Model
ENG_CVM_CVM_2-2316510-1_1.2d_dxf.zip
English
Customer View Model
ENG_CVM_CVM_2-2316510-1_1.3d_igs.zip
English
Customer View Model
ENG_CVM_CVM_2-2316510-1_1.3d_stp.zip
English
By downloading the CAD file I accept and agree to the Terms and Conditions of use.
Datasheets & Catalog Pages
LUMAWISE Drive LED Holder Type Z50 Presentation
For support call+1 800 522 6752
01/02/2024 08:48PM | Page 3
2-2316510-1
LUMAWISE DRIVE Z50, 0-10V, 0.7A, 24X24
LUMAWISE Drive LED Holder Type Z50 Presentation
English
Product Specifications
Application Specification
English
Application Specification
English
Agency Approvals
UL Report
English
For support call+1 800 522 6752
01/02/2024 08:48PM | Page 4
