2-435166-9

7000 Series DIP Switches A Performance Characteristics 7000 Series Current and Voltage Rating: Nonswitching — 1.5 amperes max. at 50 VDC Switching — 100 milliamperes max at 5 VDC (resistive load); 25 milliamperes max. at 24 VDC (resistive load) Contact Resistance, Dry Circuit: 100 milliohms max. (end of life) and 50 milliohms (initial) at 50 mV open circuit, 50 milliamperes Insulation Resistance: 1 x 109 ohms min. at 100 VDC (initial) Alcoswitch 7000 Series DIP switches are available in standard single pole, single throw; side actuated, single pole, single throw and multiple series versions. Contacts are made of high strength copper alloy with .000030 [0.00076] gold over .000050 [0.00127] nickel plating in contact area and legs plated to meet Tyco Electronics Solderability Specification 109-11-3. The multiple series switches offer the unique feature of single pole switches coupled mechanically to provide switching of various poles simultaneously. This allows flexibility in programming. Multipole switches are available with or without lever-actuated rockers and in a variety of configurations in addition to those listed. The maximum number of poles that can be ganged is six. Dielectric Withstanding Voltage: 500 VDC min. at standard atmosphereic conditions Capacitance: 5 picofarads max. Temperature Rating: Nonoperating — -73.3°C to +105°C Operating — -55°C to +105°C Vibration: Discontinuities shall not exceed 10 microseconds when subjected to 10-2000-10 Hz transversing for 20 minutes at .060 [1.52] inches total excursion Shock: No physical damage or discontinuities greater than 10 microseconds when tested with .10 ampere current applied per Tyco Electronics Specification 109-26, Condition A Humidity: Withstands an environment of +40°C and 95% RH for 96 hours Durability: No physical damage or contact resistance greater than 100 milliohms up to 7000 cycles of actuation with a resistive load of 24 VDC and 25 milliamperes max. current applied Terminal Strength (Bend Test): Two (2) 45° bend cycles per MIL-STD-202, Method 211, Condition B Materials Housing: Glass-filled polyester, 94V-0 rated, black Rocker: Thermoplastic, 94V-0 rated, white Spring Contacts and Leads: Copper alloy with .000030 [0.00076] gold over .000050 [0.00127] nickel in contact area and .000150 [0.00381] tin-lead over .000050 [0.00127] nickel on solder legs, plated to meet Tyco Electronics Solderability Specification 109-11-3. Technical Documents Product Specification: 108-7519 Instruction Sheet: 408-07779 Application Specification: 114-1056 A11 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7000 Series DIP Switches, Piano Style Actuator A 7000 Series Single Pole Single Throw Side Actuated Low Profile .380 [9.65] A Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .290 [7.37] .290 [7.37] Contact Arrangement Sealed Version Shown Pin 1 White Dot Identifies Pin 1 Note: Switches shown in open position .100 ± .005 [2.54 ± 0.13] Typ. .035 ± .005 [0.89 ± 0.13] Dia. Typ. .300 ± .005 [7.62 ± 0.13] Recommended PC Board Hole Pattern No. of Switches 2 3 4 5 6 7 8 9 10 11 12 1 Dim. A inch mm .280 7.11 .380 9.65 .480 12.19 .580 14.73 .680 17.27 .780 19.81 .880 22.35 24.89 .980 1.080 27.43 1.180 29.97 32.51 1.280 1 Unsealed 1-435802-0 435802-2 435802-3 435802-4 435802-5 435802-6 435802-1 435802-7 435802-8 — — SPST Side Actuated Part No. Sealed Tape Sealed — — — — 1-435802-5 — 1-435802-6 — 1-435802-7 — 1-435802-8 — 435802-9 3-435802-8 1-435802-9 — 2-435802-0 — 2-435802-1 — — 2-435802-2 All switches are bottom sealed. A12 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7000 Series DIP Switches, Extended Actuator, Single or Double Pole, Double Throw Multiple Single Pole Double Throw A .380 [9.65] 7000 Series A Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .290 [7.37] Contact Arrangement .360 [9.14] .460 [11.68] Pin 1 Extended Lever Actuator Shown Note: Switch positions are closed when rockers are down toward white dots. Switches have make-before-break circuit design. White Dot Identifies Pin 1 Dim. A inch mm No. of Switches SPDT Part No. Low Profile Extended Lever Actuator Actuator 1 .280 7.11 435470-7 2-435470-1 2 .480 12.19 435470-1 2-435470-2 3 .680 17.27 435470-2 — 4 .880 22.35 435470-3 2-435470-4 5 1.080 27.43 — 2-435470-5 6 1.280 32.51 — 2-435470-6 Double Pole Double Throw .36±.02 (9.14±.508) Typ. .380 [9.65] A .14±.02 (3.56±.508) .380 [9.65] Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .19±.01 (4.83±.25) Acuator .012 (3.05) Typ. .315±.010 (8.00±.25) +.01 .02 -.00 Standoff, (1.27) +.254 4 Places -.000 .29±.02 (7.36±.508) Typ. Contact Arrangement Mounting Surface Low Profile Lever Actuator Shown Pin 1 Note: Switch positions are closed when rockers are down toward white dots. Switches have make-before-break circuit design. Dim. A inch mm No. of Switches DPDT Part No. Low Profile Extended Lever Actuator Actuator 1 .480 12.19 435470-5 3-435470-1 2 .880 22.35 435470-9 — .100 ± .005 Typ. [2.54 ± 0.13] .035 ± .005 [0.89 ± 0.13] Dia. Typ. .300 ± .005 [7.62 ± 0.13] Recommended PC Board Hole Pattern A13 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7000 Series DIP Switches, Extended Actuator, Multiple Pole, Single Throw A Multiple Double Pole Single Throw .380 [9.65] 7000 Series A Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .290 [7.37] Contact Arrangement .360 [9.14] .460 [11.68] Extended Lever Actuator Shown Pin 1 Note: Switches shown in open position. White Dot Identifies Pin 1 No. of Switches DPST Part No. Low Profile Extended Lever Actuator Actuator Dim. A inch mm 1 .280 7.11 435469-9 2-435469-1 2 .480 12.19 — 2-435469-2 4 .880 22.35 435469-3 2-435469-4 5 1.080 27.43 — 2-435469-5 6 1.280 32.51 — 2-435469-6 4-Pole Single Throw .380 [9.65] A Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .290 [7.37] Contact Arrangement .360 [9.14] .460 [11.68] White Dot Identifies Pin 1 Extended Lever Actuator Shown Pin 1 Note: Switches shown in open position. No. of Switches 1 Dim. A inch mm .480 12.19 4PST Part No. Low Profile Extended Lever Actuator Actuator 435469-7 .100 ± .005 Typ. [2.54 ± 0.13] 3-435469-1 .035 ± .005 Dia. Typ. [0.89 ± 0.13] .300 ± .005 [7.62 ± 0.13 ] Recommended PC Board Hole Pattern A14 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7000 Series DIP Switches, Rocker Style Actuator .34±.02 Typ. [8.63±0.71] Standard Profile A .14±.02 Typ. [3.56±0.71] .012 [3.05] Typ. .38±.02 [9.65±0.71] .19±.01 [4.82±0.25] 7000 Series Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .315±.01 [8.00±0.25] +.000 .02 -.010 [0.71+.000 -0.25 ] Stand Off, 4 Plc. .29±.02 [7.36±0.71] Typ. Mounting Surface .022±.002 [0.56±0.05] Typ. .100 [2.54] Typ. ±.02 A [0.51] Contact Arrangment .14±.02 Typ. [3.56±0.71] Low Profile Contact Lead Spacing — .100 x .300 [2.54 x 7.62] Lead Length — .140 [3.56] below mounting surface .012 [3.05] Typ. Notches for Rocker Actuation .315±.01 [8.00±0.25] .19±.01 [4.82±0.25] .38±.02 [9.65±0.71] +.000 .02 -.010 [0.71+0.00 -0.25 ] Stand Off, 4 Plc. .29±.02 [7.36±0.71] Mounting Surface .100 [2.54] Typ. ±.02 A [0.51] Number of Switches 2 3 4 5 6 7 8 9 10 .022±.002 [0.56±0.05] Typ. Contact Arrangment SPST Low Profile SPST Standard Profile Unsealed 2-435166-9 — 435166-2 — 435166-4 435166-1 435166-5 435166-6 435166-7 Sealed — — 4-435166-9 5-435166-0 5-435166-1 5-435166-2 5-435166-3 — 5-435166-5 Unsealed — — 435626-1 435626-2 — — 435626-5 — — Tape Sealed 3-435626-6 3-435626-7 3-435626-8 — 4-435626-0 4-435626-1 4-435626-2 — 4-435626-4 A15 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 7100 Series DIP Switches A Performance Characteristics 7100 Series Current and Voltage Rating: Nonswitching — 1.0 amperes max. at 40 VDC Switching — 60 milliamperes max at 5 VDC (resistive load); 15 milliamperes max. at 24 VDC (resistive load) Alcoswitch 7100 Series DIP Switches are recommended for programming applications where the number of cycles per pole is limited. These single pole, single throw switches have been designed for a life of up to 2000 cycles per pole and feature contacts of copper alloy with .000030 [0.00076] gold over nickel plating in the contact area and legs plated to meet Tyco Electronics Solderability Specification 109-11-3. In addition, the SPST standard and low profile switches are also available with a top seal to provide protection during soldering and cleaning processes. Contact Resistance, Dry Circuit: 100 milliohms max. (end of life) and 50 milliohms (initial) at 50 mV open circuit, 50 milliamperes Insulation Resistance: 1 x 109 ohms min. at 100 VDC (initial) Dielectric Withstanding Voltage: 500 VDC min. at standard atmosphereic conditions Capacitance: 5 picofarads max. Temperature Rating: Nonoperating — -73°C to +105°C Operating — -55°C to +105°C Vibration: Discontinuities shall not exceed 10 microseconds when subjected to 10-2000-10 Hz transversing for 20 minutes at .060 [1.52] inches total excursion Shock: No physical damage or discontinuities greater than 10 microseconds when tested with .10 ampere current applied per Tyco Electronics Specification 109-26, Condition A Humidity: Withstands an environment of +40°C and 95% RH for 96 hours Durability: No physical damage or contact resistance greater than 100 milliohms after 2000 cycles of actuation with a resistive load of 24 VDC and 25 milliamperes max. current applied Terminal Strength (Bend Test): Two (2) 45° bend cycles per MIL-STD-202, Method 211, Condition B Materials Housing: Glass-filled polyester, 94V-0 rated, blue Rocker: Thermoplastic, 94V-0 rated, white Spring Contacts and Leads: Copper alloy with .000030 [0.00076] gold over .000050 [0.00127] nickel in contact area and .000150 [0.00381] tin-lead over .000050 [0.00127] nickel on solder legs, plated to meet Tyco Electronics Solderability Specification 109-11-3. Technical Documents Product Specification: 108-7532 Instruction Sheet: 408-07779 Application Specification: 114-1056 A16 Catalog 1308390 Issued 9-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in parentheses or brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967