2-480705-0

8 C 7 6 5 4 3 2 1 REVISIONS 2019 TE Connectivity. All Rights Reserved. P LTR AP5 SEE DETAIL A 8 6.35 9 D 13.97 8.13 0.25 20.32 DATE REDRAWN PER ECO-19-005708 DWN MATES WITH APPROPRIATE UNIVERSAL MATE-N-LOCK 2. RECOMMENDED PANEL THICKNESS 0.76 - 2.29. TM APVD BKW 03MAY2019 1. SF PLUG 3 PANEL MUST BE PUNCHED SO THAT THE HOUSING ENTERS THE PANEL IN THE SAME DIRECTION AS THE PUNCH. 4 OPTIONAL FOR KEYING HOUSING IN PANEL. 5 CIRCUIT NUMBER 1 LOCATION. 6. 6.35 DESCRIPTION D DIMENSIONS SHOWN REPRESENT PRODUCT IN DRY, AS MOLDED, CONDITION. ADDITIONAL 2% GROWTH DUE TO SUBSEQUENT MOISTURE ABSORPTION MAY OCCUR AND SHOULD BE ACCOUNTED FOR. 7 FOUR RIBS EQUALLY SPACED, NO SPECIFIC ORIENTATION. NO RIBS OR SIX RIBS EQUALLY SPACED, NO SPECIFIC ORIENTATION, OPTIONAL. 8 UNDERWRITERS RECOGNIZED COMPONENT LOGO AND CSA CERTIFICATION LOGO TO BE LOCATED ONCE EACH ON SIDE OF HOUSING. 9 TRADEMARK LOCATION: AMP OR TE 7 14.35 6.35 0.25 4 C C 2.54 0.25 4 4.45 0.25 TYP 2.79 4 6.99 0.25 25.91 +0.13 -0.25 26.16 12.19 0.25 B B 5 RECOMMENDED PANEL CUT OUT 27.43 0.38 9 OBSOLETE 9 OBSOLETE 9 OBSOLETE 9 OBSOLETE BLACK 1-480705-9 BLUE 1-480705-6 GRAY 1-480705-8 GREEN 1-480705-5 YELLOW 1-480705-4 ORANGE 1-480705-3 RED 1-480705-2 BROWN 1-480705-1 NATURAL A THIS DRAWING IS A CONTROLLED DOCUMENT. DWN B. WEAVER COLOR 03MAY2019 03MAY2019 S. FERNANDES APVD 03MAY2019 T. BENCHOFF mm MATERIAL NYLON UL 94V-2 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.13 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - PRODUCT SPEC - APPLICATION SPEC 0°30' - WEIGHT NAME CAP, 6 CIRCUIT, UNIVERSAL MATE-N-LOK - SIZE - CUSTOMER DRAWING PART NUMBER TE Connectivity CHK DIMENSIONS: 1-480705-0 CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 480705 SCALE 4:1 SHEET 1 OF - 2 AP5 REV A 8 C 7 6 5 4 3 2 1 REVISIONS 2019 TE Connectivity. All Rights Reserved. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 1. STAMP NUMBERS 3.18 HIGH AT WIRE END OF HOUSING (12 POINT DAVID TYPE); CLARIFICATION MARKS UNDER THE 6 & 9. 2. CHARACTERS TO BE STAMPED ON HOUSING IN A MANNER AS TO BE READ FROM WIRE END ONLY. 3. VIOLET, BLACK, BROWN, AND BLUE COLORED BLOCKS TO BE STAMPED WITH WHITE CHARACTERS. ALL OTHER COLORED BLOCKS TO BE STAMPED WITH BLACK CHARACTERS. D D 4.70 TYP REF C C 13.97 8.13 0.25 20.32 27.43 0.38 B B 25.91 +0.13 -0.25 A THIS DRAWING IS A CONTROLLED DOCUMENT. DWN B. WEAVER 03MAY2019 03MAY2019 S. FERNANDES APVD 03MAY2019 T. BENCHOFF NATURAL 2-480705-0 COLOR PART NUMBER TE Connectivity CHK DIMENSIONS: mm MATERIAL NYLON UL 94V-2 4805 (3/13) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.13 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - PRODUCT SPEC - APPLICATION SPEC 0°30' - WEIGHT NAME CAP, 6 CIRCUIT, UNIVERSAL MATE-N-LOK - SIZE - CUSTOMER DRAWING CAGE CODE A1 00779 DRAWING NO RESTRICTED TO 480705 SCALE 4:1 SHEET 2 OF - 2 AP5 REV A