2007312-1

Quick Reference Guide RJ point five Connector System The RJ point five connector system is the next generation Ethernet link, offering a higher density cabling solution for Original Equipment Manufacturers (OEMs) who desire a lower cost per port while maintaining the convenience of a single connector per channel. The port spacing is on a 7mm centerline, occupying half the space than that of traditional RJ45 Ethernet link. In addition to the high density receptacle, TE Connectivity offers the mating cable assembly, as well as cable management solutions for single box and rack configurations. The receptacle and cable assembly were redesigned to eliminate the undesirable RJ45 split pair configuration, resulting in heightened electrical performance. Additionally, the latching feature incorporates an easyto-use lanyard that will facilitate up to 96 ports on a single line card. Due to the density on the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator light closer to the end user. FEATURES AND BENEFITS • Approximately double the density offered • Product family will support Gigabit speeds over the standard RJ45 Ethernet link • Same footprint to support both integrated magnetic and non-integrated solutions • Cable assemblies capable of field termination • Cable management features available from TE for higher density configurations of Cat5e UTP cable, and roadmap supports PoE+ and 10Gig over Cat6a • Receptacle is a modular design to allow for easy and rapid deployment of product extensions te.com/products/rjpointfive TE Connectivity RJ point five Connector System Product Applications Mechanical • High density Ethernet switching/routing products • Port center-on-center spacing at 7mm for Cat5e cabling • Data center switching applications: • Overall height is 25.25mm ––Top of rack • High density cabling consists of ergonomically friendly ––End of row lanyard for easy extraction ––Mid-row • Port indicator LEDs conveniently located on the cable • Server I/O applications boot to facilitate easy viewing • Wiring closet switching products Electrical/Optical Product meets category 5e performance for 10/100/1000BASE-T applications • Insertion loss 0.4 dB maximum at 100 MHz • Return loss 20 dB minimum at 100 MHz • NEXT loss 43 dB minimum at 100 MHz • FEXT loss 35.1 dB minimum at 100 MHz Magnetic product performs for 10/100/1000BASE-T applications • Insertion loss 1.5 dB maximum at 100 MHz • Return loss 10 dB minimum at 100 MHz • Crosstalk 31 dB minimum at 100 MHz • Common Mode Rejection Ratio 17 dB minimum at 100 MHz • Isolation voltage complies with IEEE 802.3 RJ point five Connector Comparison to RJ45* 58.5 MM RJ Point Five Connector *Drawing not shown to scale 115.06 mm RJ45 RJ point five Board Mount Receptacles and Plug Kit Part Number Description Integrated Magnetics LEDs 2007669-1 2x8 Receptacle Yes 2007669-2 2x8 Receptacle Yes 2057133-1 2x8 Receptacle 2057133-2 Status Customer Drawings Product Available Yes (R/G) Yes Yes Yes (Y/G) Yes Yes No Yes (R/G) Yes Yes 2x8 Receptacle No Yes (Y/G) Yes Yes 2007311-1 2x6 Receptacle Yes Yes (R/G) Yes No 2007311-2 2x6 Receptacle Yes Yes (Y/G) Yes No 2057132-1 2x6 Receptacle No Yes (R/G) Yes No 2057132-2 2x6 Receptacle No Yes (Y/G) Yes No 2057004-1 2x12 Receptacle Yes Yes (R/G) Yes Yes 2057004-2 2x12 Receptacle Yes Yes (Y/G) Yes Yes 2057134-1 2x12 Receptacle No Yes (R/G) Yes Yes 2057134-2 2x12 Receptacle No Yes (Y/G) Yes Yes 2057014-1 2x1 Receptacle Yes Yes (R/G) Yes No 2057014-2 2x1 Receptacle Yes Yes (Y/G) Yes No 2057131-1 2x1 Receptacle No Yes (R/G) Yes No 2057131-2 2x1 Receptacle No Yes (R/G) Yes No 2007312-1 Plug Kit -- -- Yes Yes te.com/products/rjpointfive TE Connectivity RJ point five Connector System RJ point five Connector Demo Rack Demo Rack Includes: • 96 Port RJ point five cards • Port RJ45 patch panels • AMPTRAC intelligent infrastructure management system • AMP NETCONNECT Hi-D cable management • RJ point five connector to RJ45 jumper cables • Cable assembly showing LEDs through cable plug RJ point five to RJ point five Cable Assembly Part Number Cable Length Status RJ point five to RJ45 Cable Assembly Part Number Cable Length Status 2100356-1 0.5 meters Available 2100357-1 0.5 meters Available 2100356-2 1.0 meters Available 2100357-2 1.0 meters Available 2100356-3 1.5 meters Available 2100357-3 1.5 meters Available 2100356-4 2.0 meters Available 2100357-4 2.0 meters Available 2100356-5 2.5 meters Available 2100357-5 2.5 meters Available 2100356-6 3.0 meters Available 2100357-6 3.0 meters Available 2100356-7 4.0 meters Available 2100357-7 4.0 meters Available 2100356-8 5.0 meters Available 2100357-8 5.0 meters Available 2100356-9 7.5 meters Available 2100357-9 7.5 meters Available 1-2100356-0 10.0 meters Available 1-2100357-0 10.0 meters Available 1-2100356-1 12.5 meters Available 1-2100357-1 12.5 meters Available 1-2100356-2 15.0 meters Available 1-2100357-2 15.0 meters Available RJ point five Connector Documentation Part Number Description 108-2341 RJ point five Product Specifications (Design Objectives) 114-13228 RJ point five Receptacle Application Sheet 114-13235 RJ point five Plug Kit Application Sheet 408-10243 Cable Assembly Termination Instruction Sheet te.com/products/rjpointfive e-Catalog : www.te.com/products/rjpointfive Breakdown from main page : te.com Connectors Input/Output Modular Jacks & Plugs RJ point five Connector FOR MORE INFORMATION TE Technical Support USA: Canada: Mexico Latin/S. America: Germany: UK: France: Netherlands: China: Center +1 (800) 522-6752 +1 (905) 475-6222 +52 (0) 55-1106-0800 +54 (0) 11-4733-2200 +49 (0) 6251-133-1999 +44 (0) 800-267666 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved. 3-1773454-0 CIS LUG PDF 4/2012 AMP NETCONNECT, AMPTRAC RJ point five, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.