2007492-5

SFP+ Product Family: Cages Connectors Cable assemblies DESCRIPTION SFP+ extends the use of the Small Form-Factor Pluggable (SFP) interconnect up to 10 Gb/s. This system meets the performance requirements of SFF (Small Form-Factor) specification SFF-8431 and supports 8G Fibre Channel and 10G Ethernet applications. The SFP+ product family includes cages, connectors, and copper cable assemblies. Tyco Electronics also offers LC optical connectors and cable assemblies to link with SFP+ transceivers. KEY FEATURES & BENEFITS FOR MORE INFORMATION • Technical Documents: Application Specification Single & Ganged Cages 114-13120 Stacked Cages 114-13219 Product Specification 108-2331 • • • • • APPLICATIONS • • • • • • • • • Storage Servers Networking Switches Routers Hubs Network Interface Cards (NICs) • • • • PCI-SIG, PCI Express, PCIe, PCI-X and Conventional PCI are trademarks or registered trademarks of PCI-SIG. All other trademarks mentioned are the property of their respective owners. SFP+ interconnect system supports data rates of 10 Gb/s Connector and cable assembly designed to support 10 Gb/s+ signal speeds, backward compatible with SFP Both EMI spring and gasket options for cages provide excellent shielding All cage configurations are offered with light pipes for LED applications Heat sink optional for single port cages Cages are available for PCI card applications (one degree mounting angle) Cages and cable assemblies accommodate belly-to-belly mounting Stacked cages include integrated high speed connector using patented ”clicklet” construction. Active and passive copper cable assemblies provide a cost-effective solution for short reach applications. Cable assembly braid crimp and EMI skirt suppress EMI radiation. Broad line of cable assembly lengths and wire gauges offers diverse cable management options. Optimum cable assembly performance is obtained when assembly is engineered to system architecture. Industry Standards: Cage and module definition: SFF-8432 Mating Interface and performance requirements: SFF-8083 Electrical Interface Specifications: SFF-8431 Cages and Connectors Product Manager — Mike Walmsley Phone: 717-985-2835 Fax: 1-717-985-2833 Email: mjwalmsl@tycoelectronics.com Cable Assembly Product Manager — David Stonfer Phone: 717-986-5950 Fax: 717-986-7179 E-mail: david.stonfer@tycoelectronics.com Technical Support Internet: www.tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-475-6222 UK: 31-73-6246-431 Japan: 81-44-844-8111 SFP+ Product Family PART NUMBERS Cages with EMI Springs Description Cage Assy w/ Light Pipes Cage Assy Cage Assy w/ PCI Heat Sink Cage Assy w/ SAN Heat Sink Cage Assy w/ Networking Heat Sink Single Port 2007254-1 2007198-1 2007464-1 2007464-2 2007464-3 1x2 2007262-1 2007263-1 — — — 1x4 2007178-1 2007132-1 — — — 1x6 2007250-1 2007251-1 — — — Cages with Elastomeric Gaskets Description Cage Assy w/ Light Pipes Cage Assy 1x2 2007180-1 2007181-1 1x4 2007093-1 2007135-1 1x6 2007169-1 2007170-1 Cages for PCI Applications • One degree mounting angle to meet requirements of SFF-8075 1° Description Cage Assy Cage Assy w/ PCI Heat Sink & Clip Solder 2007194-1 2007193-1 Connectors Contact Plating 0.76μm (30 μin) gold 0.38μm (15 μin) gold Part Number 1888247-1 1888247-2 PCI-SIG, PCI Express, PCIe, PCI-X and Conventional PCI are trademarks or registered trademarks of PCI-SIG. All other trademarks mentioned are the property of their respective owners. 2 Press-Fit 2007215-1 2007277-1 SFP+ Product Family PART NUMBERS Stacked SFP+ Cage/Connector Assemblies Description EMI Containment Style Light Pipe Option 2x1 Elastomeric Gasket Four Per Column 2007538-5 Elastomeric Gasket Inner Light Pipes Only 2007538-6 Elastomeric Gasket Outer Light Pipes Only 2007538-7 Elastomeric Gasket None 2007538-8 EMI Springs Four Per Column 2007492-5 EMI Springs Inner Light Pipes Only 2007492-6 EMI Springs Outer Light Pipes Only 2007492-7 EMI Springs None 2007492-8 Tin plated compliant pins listed, tin-lead compliant pins available for signal connector. See Tyco Electronics drawing. Dust Plug (Non-conductive) 2x4 2007399-5 2007399-6 2007399-7 2007399-8 2007394-5 2007394-6 2007394-7 2007394-8 2x6 2007567-5 2007567-6 2007567-7 2007567-8 2007562-5 2007562-6 2007562-7 2007562-8 For Uses In Part Number Single Port Cages 1367147-1 or 1761394-1 Ganged and Stacked (Multi-port) Cages 1761394-1 Dust plug 1761394-1 has narrow width, required for port density in ganged and stacked cages. EMI Plug • • 2x2 2007417-5 2007417-6 2007417-7 2007417-8 2007637-5 2007637-6 2007637-7 2007637-8 Part Number: 1888901-1 Springs comply with SFF-8432 requirements for Improved Pluggable Form-factor (IPF) PCI-SIG, PCI Express, PCIe, PCI-X and Conventional PCI are trademarks or registered trademarks of PCI-SIG. All other trademarks mentioned are the property of their respective owners. 3 SFP+ Product Family PART NUMBERS Direct Attach Copper Cables The Tyco Electronics SFP+ direct attach copper cable assembly is a low cost alternative for short reach applications. The design allows for a serial data transmission up to 10Gbps in each direction. These SFP+ assemblies are hot swappable and the programmed EEPROM signature enables the host to differentiate between a copper cable assembly and a fiber optic module. The mechanical design of the braid crimp and EMI skirt ensure that EMI radiation is sufficiently suppressed. Additionally, the copper cable acts as a natural heat sink. The low power consumption assists in making the passive copper cable assembly an economic solution for within rack, or rack to rack applications. Standard SFP+ assemblies are offered in 24 AWG, however, several smaller wire gauges are available. Type Part Number 2032237-1 2032237-2 2032237-4 2032237-6 1-2032237-1 2032247-1 2032247-2 2032247-4 2032247-6 1-2032247-1 2053649-1 2053649-2 2053649-4 2053649-6 2052246-1 2052246-2 2052246-4 2052246-6 2032757-1 2032757-5 1-2032757-0 1-2032757-5 Standard Passive Product Facts • Truly broadband — operates from 1 Gbps to 10 Gbps • Compatible with industry standard SFP cages • 100 Ohm differential impedance • 3.3 V input source voltage • EEPROM signature which can be customized • Pull-to-release retractable pin latch design • Pull tab allows compact belly-to-belly application • 360 degree cable braid crimp and enhanced EMI skirt • Various wire gauges provide diverse cable management options • Breakout and cross-over cables can be engineered • Able to custom engineer SFP+ cable solutions to system architecture • Uses Madison Cable high speed TurboTwin parallel pair copper cable Other AWG Passive Active (Coming Soon) © Copyright 2008 by Tyco Electronics Corporation. MADISON CABLE, TurboTwin, TE LOGO and TYCO ELECTRONICS are trademarks. PCI-SIG, PCI Express, PCIe, PCI-X and Conventional PCI are trademarks or registered trademarks of PCI-SIG. All other trademarks mentioned are the property of their respective owners. Dimensions are in millimeters with inches (if shown) in brackets. For more information, see Pluggable Input / Output Solutions Catalog No.1773408-1, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: htpp://www.tycoelectronics.com. Specifications subject to change. 4-1773449-5–PDF–11/08 4 AWG 24 24 24 24 24 26 26 26 26 26 28 28 28 28 30 30 30 30 24 24 24 24 Assembly Length 0.5 meter 1 meter 3 meter 5 meter 10 meter 0.5 meter 1 meter 3 meter 5 meter 10 meter 0.5 meter 1 meter 3 meter 5 meter 0.5 meter 1 meter 3 meter 5 meter 1 meter 5 meter 10 meter 15 meter