TE Connectivity
Micro USB Connectors
Micro USB connectors
Picture
Mount type
Soldering
type
STD
REVERSED
Flange
Dimensions
P/N
Remarks
TID
A
Plug
N/A
N/A
N/A
N/A
1939053-1
1939053-2
1939053-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
A
Plug
N/A
N/A
N/A
N/A
1939054-1
1939054-2
1939054-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
AB
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 8 4 -1
60001338
B
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 6 8 -1
60001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2069746-1
Type
short version
61001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2013499-1
61001336
B
TOP
4 Dip
STD
With
7.5 x 5.00 x 2.51
2040002-1
62001336
AB
TOP
2 Dip
STD
Without
7.52 x 5 x 2.51
2134536-2
TBA
B
TOP
SMT
STD
Without
7.5 x 5 x 2.51
2174507-2
TBA
AB
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
1 5 5 1 6 2 9 -1
Splash Proof
60001915
B
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
2173157-1
Splash Proof
TBA
B
Mid h=1.5
4 Dip
STD
With
7.52 x 6.5 x 2.48
2040343-2
Frequently Asked Questions
Question 1
What does TID mean?
Answer 1
TID stands for Test Identification Number. In order to acquire a TID number
the USB connector needs to be subjected to compliance testing performed
by a USB approved independent test facility. USB IF will evaluate the test
results and inform the manufacturer of the pass of fail determination.
Question 2
Does TE Connectivity also produce custom cable assemblies?
Answer 2
TE Connectivity is a major supplier of all sorts of cable assemblies. A cable
assembly can be fully customized to the customer needs. There is even the
possibility to integrate complex (active) modules into the cable.
Question 3
Why is DIP soldering used?
Answer 3
Due to the relatively large forces that can be applied to the micro USB
interface, and the fact that all contacts are located at the back side of the
connector, further hold downs toward the front of the Micro USB connector
are required. TE Connectivity offers connectors which are fully SMD, featuring
brackets to the front of the connector. DIP type hold downs are more rugged
than SMD soldered brackets. Therefore they provide a better resistance
against break off.
Question 4
What does splash proof mean?
Answer 4
Our splash proof series of connectors are designed to withstand a moderate
amount of water sprayed on them. Even a heavy Monsoon would be not
problem for this connector series.
Quick Reference Guide
60001495
Micro USB Connectors
The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by
B
B
Mid h=1.6
Mid h=1.6
B
TOP
4 Dip
4 Dip
2 Dip
RVS
RVS
RVS
With
Without
Without
7.52 x 6.5 x 2.48
7.5 x 6.5 x 2.5
752 x 5.15 x 2.48
1554266-1
2134441-2
1932788-1
61001495
63001495
TBA
FOR MORE INFOMATION
TE Technical Support Center
Austria:
+43 (0) 1-9056-0
Baltic Regions:
+44 (0) 1-382508080
Canada:
+1 (800) 522-6752
China:
+86 (0) 400-820-6015
France:
+33 (0) 1-3420-8686
Germany:
+49 (0) 6151-607-1999
Italy:
+39 (0) 011-401-2111
Latin/S. America: +54 (0) 11-4733-2200
Mexico:
+52 (0) 55-1106-0800
Netherlands:
+31 (0) 73-6246-999
Nordic:
+46 (0) 8-5072-5000
Spain/Portugal:
+34 (0) 932-910-330
Switzerland:
+41 (0) 71-447-0447
UK:
+44 (0) 800-267666
USA:
+1 (800) 522-6752
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
widespread market adoption and consists of several form factors to accommodate different device requirements. The
Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE’s USB
connectors combine high speed data capabilities and a charging function in one connector.
TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem’s versatility in
meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has
many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid
mount. TE Connectivity’s technological capability enables its micro USB connector series as very efficient cost saving
solution for our customers.
FEATURES
BENEFITS
APPLICATIONS
• Reliability-optimized design,
• Small size connector
• Cell phones/smartphones
provides a stable connection even
• High design freedom
• MP3 players
after thousands of insertions
• Increased robustness and
• GPS units
• Cost savings achieved by the
integration of power and data
transportation within one connector
te.com
• Our large portfolio and highly
superior durability
• Cost-efficient solution
• Readers
• Home electronic devices
• Tablets
• Digital cameras and camcorders
customizable product provides the
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
5-1773464-3 CD 1M 10/2012
TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product
and/or company names might be trademarks of their respective owners.
best possible design flexibility
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make
any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the
information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject
to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
te.com/products/microusb
209-0688A.indd 1
te.com/products/microusb
12/10/23 13:49
TE Connectivity
Micro USB Connectors
Type A and B plugs and B and AB receptacles
TE Connectivity
Micro USB Connectors
Flangeless
Type B
Micro USB Connectors
Splash-Proof
Type A plugs are typically used for connection to “master”
Type AB
TE Connectivity
The offers either axial sealing or radial sealing possibilities to the phone cover.
devices. Type B plugs are used for connections to “slave”
Flange
devices. The device itself either features a receptacle that can
Flangeless
accept only type B (slave) plugs or both type A and type B
plugs (device can function as master or slave). This receptacle
Receptacle
is called an "AB" receptacle.
Splash-proof sealing all around;
Mating face
Mating face
Mating face
Mating face
water proof sealing can be applied as well
Sealing material on the outside
of the cover
Cut the flange
Plug
All holes in the shield are
closed by the housing sealing
Type A
Type B
Soldering Type
SMT
Dip
With Flange
DIP type receptacles feature 2 or 4 through-hole solder legs
With Flange
that provide additional strength to the connector.
The micro USB connector with flange leaves a gap between
the connector and the phone cover. From an aesthetic point of
view, this is less desirable. Furthermore, the gap allows for
dust intrusion.
They
prevent the connector from being ripped off the board if an
exceptionally large force is applied to the connector
4 Dip (4 legs)
2 Dip (2 legs)
(for
Cable Assemblies
example, when the device is dropped with an inserted plug).
Gap
Type AB
Mount Type
Standard
Mid Mount
holding feature can be applied
Dip
Soldering type
No dip portion
Either SMD or DIP soldering for
Appearance of Flangeless Micro USB in the Customer Model
Gap
TE Connectivity’s mobile device cable assembly product line is the latest generation
interconnects for mobile devices, including mobile phones and tablet computers. The
products are designed to be compliant with the well-known and widely used industry
standards. The product range includes al industry accepted interfaces, like micro-USB,
USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable
length, colors and configurations can be adjusted toward customers’ needs.
Type B
Reversed
Standard vs. Mid Mount
A micro USB connector has a height of 2.51mm. With standard
Flangeless
onboard mounting, this height is a given. However, by “sinking”
Flangeless
The flangeless micro USB connector looks better in
combination with the cover. The function of the flange is
picked up by the shell.
the connector into the board, the height in the end application
can be reduced.
This mount type is called Mid Mount.
Depending on the requirements, several heights can be achieved.
Reversed
The micro USB plug always needs to be plugged into the
devices with the USB logo facing the user. Reversed types
No Gap
allow for mounting on the opposite board site while the plug
insertion direction is still correct. This is achieved by flipping
Type AB
No Gap
Type B
the mating interface. Reversed mounting is available in both
standard reversed (on board) and reversed mid mount types.
te.com/products/microusb
209-0688A.indd 2
te.com/products/microusb
te.com/products/microusb
12/10/23 13:49
TE Connectivity
Micro USB Connectors
Type A and B plugs and B and AB receptacles
TE Connectivity
Micro USB Connectors
Flangeless
Type B
Micro USB Connectors
Splash-Proof
Type A plugs are typically used for connection to “master”
Type AB
TE Connectivity
The offers either axial sealing or radial sealing possibilities to the phone cover.
devices. Type B plugs are used for connections to “slave”
Flange
devices. The device itself either features a receptacle that can
Flangeless
accept only type B (slave) plugs or both type A and type B
plugs (device can function as master or slave). This receptacle
Receptacle
is called an "AB" receptacle.
Splash-proof sealing all around;
Mating face
Mating face
Mating face
Mating face
water proof sealing can be applied as well
Sealing material on the outside
of the cover
Cut the flange
Plug
All holes in the shield are
closed by the housing sealing
Type A
Type B
Soldering Type
SMT
Dip
With Flange
DIP type receptacles feature 2 or 4 through-hole solder legs
With Flange
that provide additional strength to the connector.
The micro USB connector with flange leaves a gap between
the connector and the phone cover. From an aesthetic point of
view, this is less desirable. Furthermore, the gap allows for
dust intrusion.
They
prevent the connector from being ripped off the board if an
exceptionally large force is applied to the connector
4 Dip (4 legs)
2 Dip (2 legs)
(for
Cable Assemblies
example, when the device is dropped with an inserted plug).
Gap
Type AB
Mount Type
Standard
Mid Mount
holding feature can be applied
Dip
Soldering type
No dip portion
Either SMD or DIP soldering for
Appearance of Flangeless Micro USB in the Customer Model
Gap
TE Connectivity’s mobile device cable assembly product line is the latest generation
interconnects for mobile devices, including mobile phones and tablet computers. The
products are designed to be compliant with the well-known and widely used industry
standards. The product range includes al industry accepted interfaces, like micro-USB,
USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable
length, colors and configurations can be adjusted toward customers’ needs.
Type B
Reversed
Standard vs. Mid Mount
A micro USB connector has a height of 2.51mm. With standard
Flangeless
onboard mounting, this height is a given. However, by “sinking”
Flangeless
The flangeless micro USB connector looks better in
combination with the cover. The function of the flange is
picked up by the shell.
the connector into the board, the height in the end application
can be reduced.
This mount type is called Mid Mount.
Depending on the requirements, several heights can be achieved.
Reversed
The micro USB plug always needs to be plugged into the
devices with the USB logo facing the user. Reversed types
No Gap
allow for mounting on the opposite board site while the plug
insertion direction is still correct. This is achieved by flipping
Type AB
No Gap
Type B
the mating interface. Reversed mounting is available in both
standard reversed (on board) and reversed mid mount types.
te.com/products/microusb
209-0688A.indd 2
te.com/products/microusb
te.com/products/microusb
12/10/23 13:49
TE Connectivity
Micro USB Connectors
Type A and B plugs and B and AB receptacles
TE Connectivity
Micro USB Connectors
Flangeless
Type B
Micro USB Connectors
Splash-Proof
Type A plugs are typically used for connection to “master”
Type AB
TE Connectivity
The offers either axial sealing or radial sealing possibilities to the phone cover.
devices. Type B plugs are used for connections to “slave”
Flange
devices. The device itself either features a receptacle that can
Flangeless
accept only type B (slave) plugs or both type A and type B
plugs (device can function as master or slave). This receptacle
Receptacle
is called an "AB" receptacle.
Splash-proof sealing all around;
Mating face
Mating face
Mating face
Mating face
water proof sealing can be applied as well
Sealing material on the outside
of the cover
Cut the flange
Plug
All holes in the shield are
closed by the housing sealing
Type A
Type B
Soldering Type
SMT
Dip
With Flange
DIP type receptacles feature 2 or 4 through-hole solder legs
With Flange
that provide additional strength to the connector.
The micro USB connector with flange leaves a gap between
the connector and the phone cover. From an aesthetic point of
view, this is less desirable. Furthermore, the gap allows for
dust intrusion.
They
prevent the connector from being ripped off the board if an
exceptionally large force is applied to the connector
4 Dip (4 legs)
2 Dip (2 legs)
(for
Cable Assemblies
example, when the device is dropped with an inserted plug).
Gap
Type AB
Mount Type
Standard
Mid Mount
holding feature can be applied
Dip
Soldering type
No dip portion
Either SMD or DIP soldering for
Appearance of Flangeless Micro USB in the Customer Model
Gap
TE Connectivity’s mobile device cable assembly product line is the latest generation
interconnects for mobile devices, including mobile phones and tablet computers. The
products are designed to be compliant with the well-known and widely used industry
standards. The product range includes al industry accepted interfaces, like micro-USB,
USB-A, HDMI-D and standards like USB 2.0, USB 3.0, HDMI 1.3 and 1.4. Cosmetics, cable
length, colors and configurations can be adjusted toward customers’ needs.
Type B
Reversed
Standard vs. Mid Mount
A micro USB connector has a height of 2.51mm. With standard
Flangeless
onboard mounting, this height is a given. However, by “sinking”
Flangeless
The flangeless micro USB connector looks better in
combination with the cover. The function of the flange is
picked up by the shell.
the connector into the board, the height in the end application
can be reduced.
This mount type is called Mid Mount.
Depending on the requirements, several heights can be achieved.
Reversed
The micro USB plug always needs to be plugged into the
devices with the USB logo facing the user. Reversed types
No Gap
allow for mounting on the opposite board site while the plug
insertion direction is still correct. This is achieved by flipping
Type AB
No Gap
Type B
the mating interface. Reversed mounting is available in both
standard reversed (on board) and reversed mid mount types.
te.com/products/microusb
209-0688A.indd 2
te.com/products/microusb
te.com/products/microusb
12/10/23 13:49
TE Connectivity
Micro USB Connectors
Micro USB connectors
Picture
Mount type
Soldering
type
STD
REVERSED
Flange
Dimensions
P/N
Remarks
TID
A
Plug
N/A
N/A
N/A
N/A
1939053-1
1939053-2
1939053-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
A
Plug
N/A
N/A
N/A
N/A
1939054-1
1939054-2
1939054-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
AB
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 8 4 -1
60001338
B
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 6 8 -1
60001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2069746-1
Type
short version
61001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2013499-1
61001336
B
TOP
4 Dip
STD
With
7.5 x 5.00 x 2.51
2040002-1
62001336
AB
TOP
2 Dip
STD
Without
7.52 x 5 x 2.51
2134536-2
TBA
B
TOP
SMT
STD
Without
7.5 x 5 x 2.51
2174507-2
TBA
AB
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
1 5 5 1 6 2 9 -1
Splash Proof
60001915
B
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
2173157-1
Splash Proof
TBA
B
Mid h=1.5
4 Dip
STD
With
7.52 x 6.5 x 2.48
2040343-2
Frequently Asked Questions
Question 1
What does TID mean?
Answer 1
TID stands for Test Identification Number. In order to acquire a TID number
the USB connector needs to be subjected to compliance testing performed
by a USB approved independent test facility. USB IF will evaluate the test
results and inform the manufacturer of the pass of fail determination.
Question 2
Does TE Connectivity also produce custom cable assemblies?
Answer 2
TE Connectivity is a major supplier of all sorts of cable assemblies. A cable
assembly can be fully customized to the customer needs. There is even the
possibility to integrate complex (active) modules into the cable.
Question 3
Why is DIP soldering used?
Answer 3
Due to the relatively large forces that can be applied to the micro USB
interface, and the fact that all contacts are located at the back side of the
connector, further hold downs toward the front of the Micro USB connector
are required. TE Connectivity offers connectors which are fully SMD, featuring
brackets to the front of the connector. DIP type hold downs are more rugged
than SMD soldered brackets. Therefore they provide a better resistance
against break off.
Question 4
What does splash proof mean?
Answer 4
Our splash proof series of connectors are designed to withstand a moderate
amount of water sprayed on them. Even a heavy Monsoon would be not
problem for this connector series.
Quick Reference Guide
60001495
Micro USB Connectors
The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by
B
B
Mid h=1.6
Mid h=1.6
B
TOP
4 Dip
4 Dip
2 Dip
RVS
RVS
RVS
With
Without
Without
7.52 x 6.5 x 2.48
7.5 x 6.5 x 2.5
752 x 5.15 x 2.48
1554266-1
2134441-2
1932788-1
61001495
63001495
TBA
FOR MORE INFOMATION
TE Technical Support Center
Austria:
+43 (0) 1-9056-0
Baltic Regions:
+44 (0) 1-382508080
Canada:
+1 (800) 522-6752
China:
+86 (0) 400-820-6015
France:
+33 (0) 1-3420-8686
Germany:
+49 (0) 6151-607-1999
Italy:
+39 (0) 011-401-2111
Latin/S. America: +54 (0) 11-4733-2200
Mexico:
+52 (0) 55-1106-0800
Netherlands:
+31 (0) 73-6246-999
Nordic:
+46 (0) 8-5072-5000
Spain/Portugal:
+34 (0) 932-910-330
Switzerland:
+41 (0) 71-447-0447
UK:
+44 (0) 800-267666
USA:
+1 (800) 522-6752
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
widespread market adoption and consists of several form factors to accommodate different device requirements. The
Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE’s USB
connectors combine high speed data capabilities and a charging function in one connector.
TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem’s versatility in
meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has
many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid
mount. TE Connectivity’s technological capability enables its micro USB connector series as very efficient cost saving
solution for our customers.
FEATURES
BENEFITS
APPLICATIONS
• Reliability-optimized design,
• Small size connector
• Cell phones/smartphones
provides a stable connection even
• High design freedom
• MP3 players
after thousands of insertions
• Increased robustness and
• GPS units
• Cost savings achieved by the
integration of power and data
transportation within one connector
te.com
• Our large portfolio and highly
superior durability
• Cost-efficient solution
• Readers
• Home electronic devices
• Tablets
• Digital cameras and camcorders
customizable product provides the
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
5-1773464-3 CD 1M 10/2012
TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product
and/or company names might be trademarks of their respective owners.
best possible design flexibility
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make
any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the
information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject
to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
te.com/products/microusb
209-0688A.indd 1
te.com/products/microusb
12/10/23 13:49
TE Connectivity
Micro USB Connectors
Micro USB connectors
Picture
Mount type
Soldering
type
STD
REVERSED
Flange
Dimensions
P/N
Remarks
TID
A
Plug
N/A
N/A
N/A
N/A
1939053-1
1939053-2
1939053-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
A
Plug
N/A
N/A
N/A
N/A
1939054-1
1939054-2
1939054-3
cable Ø2.8
cable Ø3.3
cable Ø4.3
N/A
AB
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 8 4 -1
60001338
B
TOP
SMT
STD
With
7.5 x 5.00 x 2.51
1 9 8 1 5 6 8 -1
60001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2069746-1
Type
short version
61001336
B
TOP
2 Dip
STD
With
7.5 x 5.00 x 2.51
2013499-1
61001336
B
TOP
4 Dip
STD
With
7.5 x 5.00 x 2.51
2040002-1
62001336
AB
TOP
2 Dip
STD
Without
7.52 x 5 x 2.51
2134536-2
TBA
B
TOP
SMT
STD
Without
7.5 x 5 x 2.51
2174507-2
TBA
AB
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
1 5 5 1 6 2 9 -1
Splash Proof
60001915
B
TOP
SMT
STD
Without
8.2 x 5.0 x 3.8
2173157-1
Splash Proof
TBA
B
Mid h=1.5
4 Dip
STD
With
7.52 x 6.5 x 2.48
2040343-2
Frequently Asked Questions
Question 1
What does TID mean?
Answer 1
TID stands for Test Identification Number. In order to acquire a TID number
the USB connector needs to be subjected to compliance testing performed
by a USB approved independent test facility. USB IF will evaluate the test
results and inform the manufacturer of the pass of fail determination.
Question 2
Does TE Connectivity also produce custom cable assemblies?
Answer 2
TE Connectivity is a major supplier of all sorts of cable assemblies. A cable
assembly can be fully customized to the customer needs. There is even the
possibility to integrate complex (active) modules into the cable.
Question 3
Why is DIP soldering used?
Answer 3
Due to the relatively large forces that can be applied to the micro USB
interface, and the fact that all contacts are located at the back side of the
connector, further hold downs toward the front of the Micro USB connector
are required. TE Connectivity offers connectors which are fully SMD, featuring
brackets to the front of the connector. DIP type hold downs are more rugged
than SMD soldered brackets. Therefore they provide a better resistance
against break off.
Question 4
What does splash proof mean?
Answer 4
Our splash proof series of connectors are designed to withstand a moderate
amount of water sprayed on them. Even a heavy Monsoon would be not
problem for this connector series.
Quick Reference Guide
60001495
Micro USB Connectors
The USB (Universal Serial Bus) is a standard product controlled by USB Implementers Forum. USB is characterized by
B
B
Mid h=1.6
Mid h=1.6
B
TOP
4 Dip
4 Dip
2 Dip
RVS
RVS
RVS
With
Without
Without
7.52 x 6.5 x 2.48
7.5 x 6.5 x 2.5
752 x 5.15 x 2.48
1554266-1
2134441-2
1932788-1
61001495
63001495
TBA
FOR MORE INFOMATION
TE Technical Support Center
Austria:
+43 (0) 1-9056-0
Baltic Regions:
+44 (0) 1-382508080
Canada:
+1 (800) 522-6752
China:
+86 (0) 400-820-6015
France:
+33 (0) 1-3420-8686
Germany:
+49 (0) 6151-607-1999
Italy:
+39 (0) 011-401-2111
Latin/S. America: +54 (0) 11-4733-2200
Mexico:
+52 (0) 55-1106-0800
Netherlands:
+31 (0) 73-6246-999
Nordic:
+46 (0) 8-5072-5000
Spain/Portugal:
+34 (0) 932-910-330
Switzerland:
+41 (0) 71-447-0447
UK:
+44 (0) 800-267666
USA:
+1 (800) 522-6752
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
widespread market adoption and consists of several form factors to accommodate different device requirements. The
Micro USB series are mostly used in mobile devices and are the smallest connector series in the USB family. TE’s USB
connectors combine high speed data capabilities and a charging function in one connector.
TE Connectivity micro USB connectors are well known for their reliability, robustness and the sytem’s versatility in
meeting all USB applications. The TE USB system is a complete interconnection technology for I/O devices and has
many variants available, ranging from DIP type soldering, SMT soldering, standard mount, reverse mount and mid
mount. TE Connectivity’s technological capability enables its micro USB connector series as very efficient cost saving
solution for our customers.
FEATURES
BENEFITS
APPLICATIONS
• Reliability-optimized design,
• Small size connector
• Cell phones/smartphones
provides a stable connection even
• High design freedom
• MP3 players
after thousands of insertions
• Increased robustness and
• GPS units
• Cost savings achieved by the
integration of power and data
transportation within one connector
te.com
• Our large portfolio and highly
superior durability
• Cost-efficient solution
• Readers
• Home electronic devices
• Tablets
• Digital cameras and camcorders
customizable product provides the
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
5-1773464-3 CD 1M 10/2012
TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product
and/or company names might be trademarks of their respective owners.
best possible design flexibility
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make
any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the
information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject
to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
te.com/products/microusb
209-0688A.indd 1
te.com/products/microusb
12/10/23 13:49