201M910-19C

CODE 54 - LOW PROFILE HEAT SHRINK BOOT BACKSHELL 201M916-19C SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-201M916-19B YYWW). 4. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 5. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 6. THIS PRODUCT IS A FUNCTIONAL EQUIVALENT OF SAE-AS85049/60-2. DATE DRAWN K.WINCZURA 18/02/2015 CHECKED 18/02/2015 APPROVED K.SHEPPARD 25/02/2015 APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-003652 L REVISED PER ECO-15-012000 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 03/06/2015 20/08/2015 APPROVED I.MYONG H.SMITH TITLE: LOW PROFILE HEAT SHRINK BOOT BACKSHELL(CODE 54) ASSY USED ON: MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 If this document is printed it becomes uncontrolled. Check for the latest revision DRAWING NO: DRAWING REV: SHT 201M9XX L 1 MEDIUM DIAMOND KNURL A-A 13,70 MAX ØY ØZ XXXX STAINLESS STEEL & BRONZE TEETH VIEW A THREAD ØB X A PART MARK HERE 3,17 +- 0,00 0,50 A TABLE 1 BASE PART NUMBER 201M903 201M908 201M910 201M912 201M914 201M916 201M918 201M920 201M922 201M924 201M928 201M932 201M936 201M940 201M944 201M948 201M961 DATE DRAWN K.WINCZURA 18/02/2015 CHECKED 18/02/2015 APPROVED K.SHEPPARD 25/02/2015 APPROVED H.SMITH 20/08/2015 REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-003652 L REVISED PER ECO-15-012000 SHELL SIZE 5 4 3 7 12 19 27 37 8 & 8S 10, 10S & 10SL 12 & 12S 14 & 14S 16 & 16S 18 20 22 24 28 32 36 40 44 48 61 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 03/06/2015 20/08/2015 APPROVED I.MYONG H.SMITH A THREAD 9/16 -24UNEF 1/2 -20UNF 5/8 -24UNEF 3/4 -20UNEF 7/8 -20UNEF 1 -20UNEF 1 1/16 -18UNEF 1 3/16 -18UNEF 1 5/16 -18UNEF 1 7/16 -18UNEF 1 3/4 -18UNS 2 -18UNS 2 1/4 -16UN 2 1/2 -16UN 2 3/4 -16UN 3 -16UN 1 1/2 -18UNEF 3,56 3,30 ØB MAX 18,0 16,6 19,6 22,7 25,9 29,2 31,5 34,7 36,6 41,0 50,0 56,4 62,7 69,1 75,4 81,8 42,0 ØZ MIN 6,5 6,6 9,3 12,8 14,7 17,8 19,8 23,0 26,2 29,1 34,9 41,4 46,6 52,1 58,6 64,9 30,0 ØY MAX 19,1 17,4 20,4 23,8 27,0 31,4 33,2 36,4 39,6 42,8 52,4 58,3 65,1 71,4 77,4 84,1 44,4 X +0,20/-0,00 1,12 1,12 1,12 1,12 1,12 1,75 1,75 1,75 1,75 1,75 2,18 2,18 2,18 2,18 2,18 2,18 1,75 TITLE: LOW PROFILE HEAT SHRINK BOOT BACKSHELL(CODE 54) ASSY USED ON: MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 If this document is printed it becomes uncontrolled. Check for the latest revision DRAWING NO: DRAWING REV: SHT 201M9XX L 2