2022Y1422-9X-CS3400

2022Y1422 SPECIFICATION CONTROL DRAWING CHEMINAX 120 OHM, AWG 22, 19 STRANDS OF AWG 34, OPTIMIZED SHIELD, TWINAXIAL CABLE Date 7-18-13 Revision B THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. .0295 .077 (nominal) .080 (maximum) .052 .171 .191 CONDUCTORS AWG 22, 19 Strands of AWG 34, Silver-Coated Copper ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 120 ± 12 ohms, Method D at 1 MHz MUTUAL CAPACITANCE 12.7 pF/ft. (nominal) VELOCITY OF PROPAGATION 77% (nominal) SURFACE TRANSFER IMPEDANCE 225 milliohms/meter (maximum) at 0.1 to 1 MHz (Per MIL-DTL-85485) DIELECTRICS Rayfoam H Colors - White/Light Blue FILLERS Radiation-Crosslinked Modified ETFE SHIELD AWG 38, Silver-Coated Copper Optimized JACKET Modified FEP Outer jacket color will be translucent white (designated by a “-9X" appended to the part number, e.g. 2022Y1422-9X) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE (prior to cabling) 14.9 ohms/1000 ft. (nominal) INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST IMPULSE TEST 1.0 kV (rms) 6.0 kV (peak) VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum) ENVIRONMENTAL FLAMMABILITY Method B HEAT SHOCK 225°C LOW TEMPERATURE-COLD BEND -55°C/5.50 inch mandrel VOLTAGE WITHSTAND (Post Environmental) 1000 volts (rms), 1 minute PHYSICAL INSULATION (DIELECTRIC) (prior to cabling) ELONGATION TENSILE STRENGTH 50% (minimum) 600 lbf/in2 (minimum) JACKET ELONGATION TENSILE STRENGTH 200% (minimum) 2000 lbf/in2 (minimum) JACKET THICKNESS .010 inch (nominal) SHIELD COVERAGE 90% (minimum) ENGINEERING REFERENCE TEMPERATURE REATING -65°C to +200°C WEIGHT 25.7 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2013 Tyco Electronics Corporation, All rights reserved.