2027395-7

General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S n n n n n n n 1 pole 35A, 1 form A (NO) contact Contact gap >1.5/1.8/2.1 mm options available 350mW hold power1) Ambient temperature up to 85°C at 35A Meet VDE 0126-1-1 and IEC 62109-2 Product in accordance to IEC 60335-1 EN61095: AC7a at 85°C Typical applications Photovoltaic inverter Electrical vehicle loading stations Electrical vehicle U f0156_bc_inv Insulation Data Approvals VDE 40030974, UL E58304, TUV R50369970 Technical data of approved types on request Contact Data Contact arrangement 1 form A (NO) Contact gap > 1.5mm >1.8mm >2.1mm Rated voltage 250/277VAC, 30VDC 2) Rated current 35A Breaking capacity max. 9695VA, 1200W Contact material Ag alloy Initial contact resistance 75mΩ max. at 1A 6VDC Frequency of operation, with/without load 6 cycles / min = with 300 cycles / min = without Operate/release time max., incl bounce time 18/15ms Contact ratings 3) Type Load Cycles IEC 61810 1.5mm gap (Suffix blank) NO 35A, 250VAC, resistive, 85°C 30x103 1.8mm gap (Suffix S) NO 35A, 250VAC, resistive, 85°C 20x103 NO 40A, 30VDC, 70°C 60x103 2.1mm gap (Suffix T) NO 35A, 277VAC, resistive 30x103 UL 508 1.5mm gap (Suffix blank) NO 35A, 277VAC, resistive, 85°C 30x103 1.8mm gap (Suffix S) NO 35A, 250VAC, resistive, 85°C 20x103 NO 40A, 30VDC, 70°C 60x103 Mechanical endurance, DC coil Coil Data Rated coil voltage Coil insulation system according UL 5x105 Initial dielectric strength between open contacts 2500Vrms between contact and coil 4000Vrms Initial surge withstand voltage between contact and coil 6kV (1.2 /50 uS) Initial insulation resistance (at 500VDC) between open contacts 1X109Ω between contact and coil 1X109Ω Clearance/creepage between contact and coil >1.5/1.8 mm type 3/4mm >2.1 mm type 4.2/5.6mm Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +85°C2) Category of environmental protection IEC 61810 RTII - flux proof RTIII - wash tight Vibration resistance (functional) 10-50Hz double amplitude 1.5mm Shock resistance (functional) 10g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting see note2) Weight appr. 30g Resistance to soldering heat THT IEC 60068-2-20 260°C/10s Packaging unit box/500 pcs. 1) Rated Voltage: 12VDC. After the energization time of 100ms with 12 VDC the coil requires a reduction of the coil voltage to 4.7...6.0 VDC. 2) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 3) Contact ratings with relay properly vented. Only typical ratings listed, more ratings on request. 12VDC class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% W 12 see note1) 9.6 0.8 64+10% 2.25 / min. 0.35 hold All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 12-2019, Rev. 1219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins Notes 1) General tolerance Diagram Dimension < 1 mm 1 ~ 3 mm > 3 mm Tolerance ±0.1 ±0.2 ±0.3 2) Dimensions of the pins after tin soldering a) +0.4 for the width and the thickness b) +1.0 for the length Product code structure Typical product code T9S V 1 K 1 5 -12 S Type T9S Power Relay T9S Series Enclosure V Flux-proof plastic case S Wash tight Contact arrangement 1 1 Form A (1 NO) Coil Input K DC coil, 2.25W Mounting and termination 1 PCB mounting; PCB terminals for coil and contacts Contact material 5 AgNi 8 Special Ag Alloy Coil voltage Coil code: Please refer to coil version table Contact Gap blank 1.5mm contact gap S 1.8mm contact gap T 2.1mm contact gap Product code T9SV1K15-12 T9SV1K15-12S T9SS1K15-12S T9SV1K18-12T Version PCB, flux proof Contact arrangement 1 form A (NO) contact PCB, wash tight PCB, flux proof Contact material AgNi Special Ag alloy Contact gap >1.5mm >1.8mm >1.8mm >2.1mm Coil 12VDC Part Number 2027395-1 2027395-3 2027395-6 2027395-7 Note: only typical PN listed, other types on request. 2 12-2019, Rev. 1219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.