202B585-3-0

Materials -3 Semi-Rigid Modified Polyolefin Product Facts Heat-shrinkable Semi-Rigid ■ Flame Retardant ■ Good resistance to fluids and heat ■ ■ 4 Molded Parts Applications Installation Operating Temperature Range TE molded parts in -3 material are designed for use in general harnessing applications where toughness is required and systems are occasionally exposed to fluids or heat. The adhesive-lined parts provide excellent sealing and strain relief at connector-cable terminations and transitions. A wide range of shapes are available in this material. The standard color is black. -3 molded parts will shrink on the application of heat above 125°C [257°F]. -55°C to 135°C [-67°F to 275°F] Available in: Recommended installation temperature: 150°C [302°F] Americas Europe Asia Pacific ■ ■ ■ 4-25 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Materials -3 (Continued) Specifications/Approvals Military  TE UL SAE-AS81765/1, Type I Def. Stan. 59-97 Issue 3 Type DA (Europe) BS-G-198-5-DA (Europe) SAE-AS85049/ 140, 141, 142 (material designator A) 224, File E85381 — RT-301 — Product Characteristics Physical Thermal Electrical Water absorption Tensile strength Ultimate elongation 2% secant modulus Specific gravity Heat aging for 168 h at 175°C [347°F] Heat shock for 4 h at 225°C [437°F] Low-temperature flex at -55°C [-67°F] Flammability Electric strength — Aviation fuel F40 Fluid resistance Lubricating oil O-149 Phosphate ester hydraulic fluid (DTD 900/4881A) Specification Requirements 10.5 MPa (min.) 250% (min.) 80–160 MPa 1.4 (max.) Ultimate elongation 150% (min.) No dripping, cracking, or flowing No cracking during mandrel bend Self-extinguishing 8 MV/m (min.) 0.5% (max.) Tensile strength 8.5 MPa (min.) Ultimate elongation 200% (min.) Tensile strength 8.5 MPa (min.) Ultimate elongation 200% (min.) Test Method ISO 37; ASTM D 412 ISO 37; ASTM D 412 ASTM D 882 ISO 1183; ASTM D 792 ISO 188, ISO 37 ASTM D 2671 RK-6703, CL 2.7: RT-301 Sec. 4.3.4 RK-6703, CL 2.8: ASTM D 635 IEC 243 ISO 62 ISO 1817 and ISO 37 after immersion for 24 h at 23°C [73°F] ISO 1817 and ISO 37 after immersion for 24 h at 23°C [73°F] Tensile strength 8.5 MPa (min.) Ultimate elongation 200% (min.) ISO 1817 and ISO 37 after immersion for 24 h at 23°C [73°F] 4-26 Catalog 1654025 Revised 5-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015