202F211-770-0

Molded Parts Port Number Specification Control Drawing Description : 202F211thru274 Boot, Straight, With Lip NOTES 1-------P-------1 inches 1. All dimensions ore in c-=='----c [millimeters] COATING~ 2. Dimensions oppeming in table ore as follows: b - After Unrestricted Recovery rr-:~:__~\--_1 I o - As Supplied H DIA - J DIA 1__~..,-----, 3. Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by .06 max. 4. "S" & "T'' dimensions apply to o minimum of 240" of the AFTER UNRESTRICTED RECOVERY AS SUPPLIED circumference. TABLE OF DIMENSIONS PART NUMBER 202F211 202F221 202F232 202F242 202F253 202F263 CTE 202F274 p R JO JW S T Min Max Min Max ±10% ±10% ±10% .06/-.03 ±.03 .06/-.03 Ref a b 0 b b b b b b b b J H HW .94 .39 .68 .26 4.17 .46 3.40 .06 [23,9] [9.9] [17.3] [6.6] [105,9] [11.7] [ 86.4 J [1.5] 1.07 .52 .82 .30 [27,2] [13,2] [20,8] [7,6] 4.77 .48 3.88 .06 [121 ,2] [12,2] [98,6] [1,5] -- 1.22 .73 .96 .35 5.46 [31 ,0] [18,5] [24,4] [8,9] [138,7] .48 4.44 .07 [12,2] [112,8] [1. 8] -- 1.40 .87 1.13 .40 6.28 .48 5.15 .07 [35,6] [22, 1 J [28, 7] [1 0,2] [159,5] [12,2] [130,8] [ 1. 8] 1.53 1.11 1.24 .43 7.00 .55 5.60 .07 [38,9] [28,2] [31,5] [1 0,9] [177.8] [14.0] [142,2] [1. 8] 1. 78 1.27 1.51 .50 [ 45,2] [32,3] [38,4] [12, 7] 2.03 [51 ,6] 1.62 [ 41,1 J 1.79 .59 [ 45,5] [15,0] 8.00 .60 6.42 .07 [203,2] [15,2] [163, 1 J [ 1. 8] -- 8.00 .60 [203,2] [15,2] -- .06 [ 1. 5 .06 .05 J [1.5] [ 1, 3] .06 .05 J [1 ,5] [ 1, 3] .07 .05 J [1 ,8] [ 1, 3] .07 .05 J [1 ,8] [ 1, 3] .07 .07 J [1 ,8] [ 1. 8] .07 .07 J [1 ,8] [ 1. 8] .06 [ 1. 5 .06 [ 1. 5 .06 [ 1. 5 .06 [ 1. 5 .06 [ 1. 5 6.21 .07 .07 .07 .07 [157,7] [ 1, 8] [ 1 ,8] [1 ,8] [ 1 '8] -- TE Connectivity TE CONNECTIVITY 300 CONSTITUTION DRIVE MENLO PARK, CALIFORNIA 94025 IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. CHECK FOR THE LATEST REVISION. Revision Dote : U1 Port Number 20APR11 Description : MP060144 202F211thru274 Boot, Straight, With Lip Po.ge 1 of 2 Molded Parts Port Number Specification Control Drawing Description : 202F211 thru274 Boot, Straight, With Lip COMPATABILITY CHART MATERIAL DASH NO. MATERIAL DESCRIPTION -50 Flexible, VPB RT SPEC RT-1313 COATING SLASH NO. COATING S NO. COATING DESCRIPTION Adhesive N/A /86,/164,/180 S-1 048; S-1124; S-1 030/1 Adhesive S-1 017; S-1048; S-1 030/1 Adhesive -51 Flexible, EPB RT-1321 -71 Flexible, Polyolefin RT-1316 142,/86,/180 -770 NBCCS RT -770 TYPE II N/A ORDERING INFORMATION -XX /XX -0 Bose port number Material dash number (See Compatability Chart) Modification number Adhesive slash number IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. CHECK FOR THE LATEST REVISION. (If necessary, see Compotobility Chart) Color Designator THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REVISION TE Connectivity TE CONNECTIVITY 300 CONSTITUTION DRIVE MENLO PARK, CALIFORNIA 94025 © 2004,2011 Revision Dote : U1 Port Number 29MAR11 Description : 202F211thru274 Boot, Straight, With Lip Tyco Electronics Corparation.a TE connectivity Ltd. Company. All rights reserved CAD FILE: MP060144 Page 2 of 2