202K121-3-0

4-Molded Parts for UK 30/9/02 10:45 am Page 68 202K121 to 185 Straight, lipped boot Applications Use in conjunction with Raychem adapters to provide strain relief for harness systems using circular connectors. Boot is compatible with all Raychem grooved adapters of the appropriate shell size. As supplied (a) J dia. H dia. After unrestricted recovery (b) P R Y X U Tan SlightX taper H dia. J dia. JO HW 202K121 - 153 = 2 lips 202K163 - 185 = 3 lips Mod 01 = 1 lip removed Mod 02 = 2 lips removed (only available in sizes 163, 174, 185). Available in: 4-68 Molded Parts Americas Europe Asia Pacific    JW 4-Molded Parts for UK 30/9/02 10:45 am Page 69 Fax-on-demand US only (800) 260-9099 Outside US (650) 257-2301 Fax ID 3125 3126 Description SCD SCD-25/225 Visit our website at www.tycoelectronics.com Materials available Material* Material description Precoating no. Adhesive part no.** -3 Semirigid polyolefin /42 or /86 S-1017 or S-1048 -4 Flexible polyolefin /42 or /86 S-1017 or S-1048 -12 Viton N/A S-1255-04 -25 Fluid-resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125 -100 Polyolefin, Zerohal /86 or /180 S-1030 or S-1048 *For more information, please see the appropriate material page in this section. **For more information, please see Section 5 of this catalog. Product dimensions (mm/in) H Min. Max. Part -3, -4, -12, -25 number a b J Min. -3, -4, -25 a Min. -12 a Min. -100 a Max. 202K121 24.0 (.95) 10.4 (.41) 24.0 (.95) 13.0 (.51) 14.0 (.55) 5.6 (.22) 38.0 (1.50) 21.0 (.83) 202K132 30.0 (1.18) 14.2 (.56) 30.0 (1.18) 14.0 (.55) 15.0 (.59) 5.9 (.23) 55.0 (2.17) 32.0 (1.26) 202K142 31.0 (1.22) 18.0 (.71) 31.0 (1.22) 16.0 (.63) 18.0 (.71) 7.1 (.28) 67.0 (2.64) 35.0 (1.38) 202K153 36.0 (1.42) 22.4 (.88) 36.0 (1.42) 19.0 (.75) 21.0 (.83) 8.4 (.33) 80.0 (3.15) 42.0 (1.65) 202K163 43.0 (1.69) 28.2 (1.11) 43.0 (1.69) 22.0 (.87) 25.0 (.98) 9.9 (.39) 99.0 (3.90) 61.0 (2.40) 202K174 60.0 (2.36) 35.1 (1.38) 60.0 (2.36) 35.0 (1.38) 39.0 (1.54) 15.7 (.62) 130.0 (5.12) 72.0 (2.83) 202K185 66.0 (2.60) 44.5 (1.75) 66.0 (2.60) 38.0 (1.50) 42.0 (1.65) 16.8 (.66) 170.0 (6.69) 90.0 (3.54) U ±10% b JO ±10% b HW ±20% b JW Min. b X ±20% b Y ±20% b 202K121 12.0 (.47) 8.5 (.33) 1.6 (.06) .41 (.016) 24.0 (.94) 13.0 (.51) 202K132 12.0 (.47) 11.5 (.45) 1.8 (.07) .81 (.032) 24.0 (.94) 18.0 (.71) 202K142 20.0 (.79) 17.0 (.67) 1.8 (.07) .81 (.032) 32.0 (1.26) 25.0 (.98) 202K153 20.0 (.79) 19.5 (.76) 2.0 (.08) .81 (.032) 32.0 (1.26) 30. 0 (1.18) 202K163 20.0 (.79) 21.0 (.82) 2.2 (.08) .81 (.032) 52.0 (2.05) 30.0 (1.18) 202K174 20.0 (.79) 39.0 (1.53) 3.3 (.13) 1.02 (.040) 52.0 (2.05) 50.0 (1.97) 202K185 20.0 (.79) 51.5 (2.02) 3.8 (.15) 1.63 (.064) 52.0 (2.05) 70.0 (2.76) b P R ±10% b ±10% b Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 mm (.06") max. Users should independently evaluate the suitability of the product for their application. Before ordering check with factory for most current data. 4-69 Molded Parts