202K132-25-01-0

Boots 202K121 to 185 P Straight, Lipped Boot R As Supplied (a) X U J Dia. H Dia. Ta H Dia. HW After Unrestricted Recovery (b) P R Y X U J Dia. H Dia. Slight taper Tan H Dia. 4 J Dia. Molded Parts J 202K121 to 185 JW HW 202K121 - 153 = 2 lips 202K163 - 185 = 3 lips Mod 01 = 1 lip removed Mod 02 = 2 lips removed (only available in sizes 163, 174, 185). For eyelet clip, order CS-1858 option. Applications Use in conjunction with Raychem adapters to pro185 vide strain202K121 relief fortoharness systems using circular connectors. Materials Available Material* -3 -4 -12 -25 -100 Boot is compatible with all Raychem grooved adapters of the appropriate shell size. Material Description Semirigid polyolefin Flexible polyolefin Viton® Fluid-resistant elastomer Polyolefin, Zerohal Precoating No. /42 or /86 /42 or /86 N/A /42 or /86 or /225 /86 or /180 Adhesive Part No.** S-1017 or S-1048 S-1017 or S-1048 S-1255-04 S-1017 or S-1048 or S-1125 S-1048 or S-1030 *For more information, please see the appropriate material page in this section. **For more information, please see section 5. Product Dimensions Part No. 202K121 202K132 202K142 202K153 202K163 202K174 202K185 H Min. Max. -3,-4,-12,-25 b a 24.0 [.95] 10.4 [.41] 30.0 [1.18] 14.2 [.56] 31.0 [1.22] 18.0 [.71] 36.0 [1.42] 22.4 [.88] 43.0[1.69] 28.2 [1.11] 60.0 [2.36] 35.1 [1.38] 66.0 [2.60] 44.5 [1.75] -3, -4, -25 a 24.0 [.95] 30.0 [1.18] 31.0 [1.22] 36.0 [1.42] 43.0 [1.69] 60.0 [2.36] 66.0 [2.60] J Min. -12 a 13.0 [.51] 14.0 [.55] 16.0 [.63] 19.0 [.75] 22.0 [.87] 35.0 [1.38] 38.0 [1.50] -100 a 14.0 [.55] 15.0 [.59] 18.0 [.71] 21.0 [.83] 25.0 [.98] 39.0 [1.54] 42.0 [1.65] Max. b P ±10% b R ±10% b U ±10% b JO ±10% b HW ±20% b JW Min. b X ±20% b Y ±20% b 5.6 [.22] 5.9 [.23] 7.1 [.28] 8.4 [.33] 9.9 [.39] 15.7 [.62] 16.8 [.66] 38.0 [1.50] 55.0 [2.17] 67.0 [2.64] 80.0 [3.15] 99.0 [3.90] 130.0 [5.12] 170.0 [6.69] 21.0 [.83] 32.0 [1.26] 35.0 [1.38] 42.0 [1.65] 61.0 [2.40] 72.0 [2.83] 90.0 [3.54] 12.0 [.47] 12.0 [.47] 20.0 [.79] 20.0 [.79] 20.0 [.79] 20.0 [.79] 20.0 [.79] 8.5 [.33] 11.5 [.45] 17.0 [.67] 19.5 [.76] 21.0 [.82] 39.0 [1.53] 51.5 [2.02] 1.6 [.06] 1.8 [.07] 1.8 [.07] 2.0 [.08] 2.2 [.08] 3.3 [.13] 3.8 [.15] .41 [.016] .81 [.032] .81 [.032] .81 [.032] .81 [.032] 1.02 [.040] 1.63 [.064] 24.0 [.94] 24.0 [.94] 32.0 [1.26] 32.0 [1.26] 52.0 [2.05] 52.0 [2.05] 52.0 [2.05] 13.0 [.51] 18.0 [.71] 25.0 [.98] 30.0 [1.18] 30.0 [1.18] 50.0 [1.97] 70.0 [2.76] Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max. VITON is a trademark of DuPont Performance Elastomers Available in: Americas Europe Asia Pacific n n n 4-61 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171