202M010-19B-CS5759

CODE 54 - HEAT SHRINK BOOT BACKSHELL 202M016-19C SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. ADAPTOR TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-202M016-19B). 4. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 5. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 6. WHEN "L" MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 WIRE HOLES, 120° APART. DRAWN K.WINCZURA DATE CHECKED 23/06/2015 APPROVED K.SHEPPARD 01/07/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 23/06/2015 06/10/2015 REVISIONS LTR DESCRIPTION B1 REVISED PER ECO-12-011624 C REVISED PER ECO-15-014373 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE APPROVED K.YEE 06/21/12 06/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: HEAT SHRINK BOOT BACKSHELL (CODE 54) ASSY USED ON: MIL-DTL-81703 SERIES III / MIL-DTL-5015G / MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 202M0XX C 1 C D 10 0 E 6 Ø PART MARK HERE ,5 G XXXX A THREAD ØB 3, 50 Ø F MEDIUM DIAMOND KNURL 45° BACKSHELL TABLE 1 ORDER NO. 03 08 10 12 14 16 18 20 22 24 28 32 36 40 61 DRAWN K.WINCZURA DATE 23/06/2015 APPROVED K.SHEPPARD 01/07/2015 H.SMITH 06/10/2015 REVISIONS LTR DESCRIPTION B1 REVISED PER ECO-12-011624 C REVISED PER ECO-15-014373 A THREAD 9/16-24 UNEF 1/2-20 UNF 10, 10S, 10SL 5/8-24 UNEF 7 12 & 12S 3/4-20 UNEF 12 14 & 14S 7/8-20 UNEF 1-20 UNEF 19 16 & 16S 18 1 1/16-18 UNEF 27 1 3/16-18 UNEF 20 37 1 5/16-18 UNEF 22 1 7/16-18 UNEF 24 1 3/4-18UNS 28 2-18 UNS 32 36 2 1/4-16 UN 2 1/2-16 UN 40 1 1/2-18 UNEF 61 3RD ANGLE PROJECTION NOT TO SCALE 23/06/2015 CHECKED APPROVED SHELL SIZE 4 5 3 8 & 8S UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE APPROVED K.YEE 06/21/12 06/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 ØB MAX 17,0 15,6 18,6 21,7 24,9 28,2 30,9 34,1 37,3 40,4 50,0 56,3 62,7 69,0 42,0 C ±0,5 16,8 16,6 16,8 17,3 18,1 19,0 19,2 20,1 20,3 21,8 23,3 25,0 26,2 28,6 22,1 D ±0,5 17,1 17,1 18,0 19,1 19,4 20,2 20,5 21,1 22,0 22,4 25,2 26,4 27,6 28,9 22,6 ØE ±0,5 6,7 6,7 10,3 13,6 16,3 19,5 21,9 25,2 28,3 31,5 37,5 41,4 46,9 50,8 27,0 ØF MAX 13,5 13,5 16,1 19,5 22,1 25,3 27,7 31,7 34,8 38,0 44,0 47,9 54,8 58,7 33,7 G +0,20/-0 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,75 1,75 1,75 1,75 1,75 2,20 2,20 1,75 TITLE: HEAT SHRINK BOOT BACKSHELL (CODE 54) ASSY USED ON: MIL-DTL-81703 SERIES III / MIL-DTL-5015G / MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 202M0XX C 2