203M210-19C05

CODE 54 - BRAID TAIL BACKSHELL 203M216-19B08-L SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 ENTRY SIZE (TABLE 2) MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M216-19B08). 4. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. WHEN "L" MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 WIRE HOLES, 120° APART. DRAWN K.WINCZURA DATE CHECKED 13/02/2015 APPROVED K.SHEPPARD 24/02/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 13/02/2015 01/10/2015 REVISIONS LTR DESCRIPTION R REVISED PER ECO-15-003651 S REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 10/03/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 203M2XX S 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 STAINLESS STEEL TEETH VIEW H 16,80 `0,50 W XXXX A THREAD ØB E XXXX ØK A THREAD ØB M SILICONE O-RING T J PART MARK HERE PART MARK HERE 4 152,4 MIN ØY TINNED COPPER SHIELD 152,4 MIN ØZ TINNED COPPER SHIELD 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 W H T 16,80 `0,50 90° BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DRAWN K.WINCZURA DATE CHECKED 13/02/2015 APPROVED K.SHEPPARD 24/02/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 13/02/2015 01/10/2015 REVISIONS LTR DESCRIPTION R REVISED PER ECO-15-003651 S REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 10/03/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH 152,4 MIN 152,4 MIN J E M 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 203M2XX S 2 TABLE 1 ORDER NUMBER 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 6 3 SHELL SIZE 7 10 7 12 19 27 37 8 & 8S 10, 10S, 10SL 12 & 12S 14 & 14S 16 & 16S 18 20 22 24 28 32 36 40 44 48 61 TABLE 2 ENTRY SIZE 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 21 22 24 28 DRAWN K.WINCZURA ØK MAX NA NA 21,0 21,0 21,0 24,5 24,5 29,0 32,5 32,5 35,5 35,5 37,0 37,0 40,0 40,0 43,5 48,5 48,5 52,1 58,5 DATE CHECKED 13/02/2015 APPROVED K.SHEPPARD 24/02/2015 APPROVED H.SMITH 01/10/2015 REVISIONS LTR DESCRIPTION R REVISED PER ECO-15-003651 S REVISED PER ECO-15-013980 9/16-24 UNEF 1/2-20 UNF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16UN 1 1/2-18 UNEF ØZ REF 4,77 6,35 7,92 9,52 11,12 12,70 14,27 15,87 17,47 19,05 20,62 22,23 23,82 25,40 26,98 28,60 31,80 33,34 35,00 38,10 44,45 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DA TE 10/03/2015 01/10/2015 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH MAX ENTRY 04 04 06 08 09 11 12 14 16 18 22 24 28 28 28 28 18 H ±0,5 NA NA 24,0 24,0 24,0 27,0 27,0 31,0 34,0 34,0 35,0 35,0 38,0 38,0 42,0 42,0 45,0 54,5 54,5 58,0 65,5 ØY REF 13,1 13,1 13,1 17,9 17,9 17,9 17,9 24,2 24,2 24,2 24,2 30,6 30,6 30,6 33,2 33,2 42,0 42,0 42,0 42,0 49,0 3RD ANGLE PROJECTION NOT TO SCALE 13/02/2015 ØB MAX 17,0 15,6 18,6 21,7 24,9 28,2 30,9 34,1 37,3 40,4 50,0 56,3 62,7 69,0 75,4 81,7 42,0 A THREAD W ±0,5 26,4 24,5 26,5 29,0 30,5 34,0 37,0 42,0 44,0 45,0 54,2 60,9 67,2 73,2 79,5 85,8 47,8 M ±0,5 NA NA 15,5 15,5 15,5 17,0 17,0 19,5 21,0 21,0 20,0 20,0 21,5 21,5 24,0 24,0 25,5 31,0 31,0 33,0 36,5 T ±0,5 17,8 17,5 17,8 18,7 19,0 21,0 23,5 27,0 27,0 27,0 31,4 36,4 38,0 41,0 44,1 47,2 28,0 J ±0,5 NA NA 25,7 25,7 25,7 27,2 27,2 28,7 30,4 30,4 32,1 32,1 33,7 33,7 35,2 35,2 36,7 39,8 39,8 43,8 48,9 E ±0,5 23,8 23,8 25,5 26,5 28,1 30,2 30,2 32,0 33,6 35,1 38,7 42,3 47,1 49,3 52,5 55,6 36,6 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE W T E ±0,5 ±0,5 ±0,5 26,3 16,0 23,8 22,4 17,5 23,8 25,0 18,8 25,5 28,3 20,4 26,5 30,4 21,5 28,1 33,5 23,0 30,2 35,5 24,0 30,2 38,8 25,7 32,0 41,9 27,2 33,6 44,8 28,7 35,1 50,7 31,6 38,7 60,0 33,5 42,3 65,5 36,0 47,1 72,0 39,3 49,3 75,5 40,8 52,5 75,5 40,8 55,6 48,3 27,0 36,6 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE H M J ±0,5 ±0,5 ±0,5 NA NA NA NA NA NA 24,3 17,2 25,7 24,3 17,2 25,7 24,3 17,2 25,7 28,3 19,4 27,2 28,3 19,4 27,2 31,1 21,0 28,7 34,2 22,8 30,4 34,2 22,8 30,4 38,5 25,3 32,1 38,5 25,3 32,1 40,7 26,1 33,7 40,7 26,1 33,7 43,7 27,6 35,2 43,7 27,6 35,2 46,4 29,1 36,7 50,0 31,0 39,8 50,0 31,0 39,8 53,5 33,0 43,8 60,3 36,5 48,9 TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 203M2XX S 3