203M908-19A-CS8034

ANTI-ROTATIONAL SET SCREW 6 CODE 21 - HEAT SHRINK BOOT BACKSHELL 203M916-19B-D SERIES SHELL SIZE (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANETLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M912-19B). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION. 5. BACKSHELL MATES TO MIL-C-26482 SERIES I, CLASS E, F, MS3110, MS3111 AND MS3116 CONNECTORS. 6. ANTI-ROTATIONAL SET SCREW, THREE #4-40 THREADED HOLES 120° APART, SINGLE MATING SET SCREW SUPPLIED. DRAWN W.RUST DATE CHECKED 08/09/2015 APPROVED K.SHEPPARD 08/09/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 08/09/2015 01/10/2015 REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-013980 L REVISED PER ECO-18-008680 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 01/10/15 06/04/18 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH O. CANO TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES I TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: 203M9XX DRAWING REV: L SHT 1 ANTI-ROTATIONAL SET SCREW MEDIUM DIAMOND KNURL 28,00 10,50 SILICONE O-RING ØY ØZ XXXX ØB A THREAD X 3,50 PART MARK HERE TABLE 1 BASE PART NUMBER 203M908 203M910 203M912 203M914 203M916 203M918 203M920 203M922 203M924 DRAWN W.RUST DATE 08/09/2015 APPROVED K.SHEPPARD 08/09/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 08/09/2015 CHECKED 01/10/2015 REVISIONS LTR DESCRIPTION K REVISED PER ECO-15-013980 L REVISED PER ECO-18-008680 SHELL SIZE 5 08 10 12 14 16 18 20 22 24 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 01/10/15 06/04/18 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED H.SMITH O. CANO A THREAD 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF 4 DRAIN HOLES WHEN 'D' MODIFICATION IS SPECIFIED ØB MAX 18,05 21,55 24,65 27,65 31,05 34,35 37,55 40,55 43,55 X +0,20/-0,00 1,12 1,12 1,12 1,12 1,12 1,12 1,75 1,75 1,75 ØZ 7,15 9,80 13,50 15,90 19,00 21,40 24,60 27,80 31,00 ØY MAX 13,50 15,50 19,50 21,50 24,50 26,50 31,00 34,50 36,50 TITLE: HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-26482 SERIES I TE CONNECTIVITY - POLAMCO LTD RESERV ES TH E RIGH T TO AMEND TH IS DRAW ING AND THE INFORMATIO N SET FORTH HEREON AT ANY T IME. USERS SH OULD IND EPENDENTLY EVALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. DRAWING NO: 203M9XX DRAWING REV: L SHT 2