Rectangular Pin and Socket Connectors
AMPLIMITE Subminiature
Connectors, Series
Connectors
109 (Continued)
Introduction
Product Facts
■
Military qualified connectors
conform to the latest amendments of MIL-DTL-24308
■
Industrial versions available
that use the same manufacturing process of MIL-C24308 connectors
■
Non-magnetic versions
available per NASA spec,
or with rubber grommet on
rear of NASA-type connector
■
ULTRA-LITE AMPLIMITE
non-magnetic connectors
save weight and improve
EMI shielding vs. brass
shell NASA-style
connectors
■
AS39029 contacts offer reliability and economies of
high speed termination by
automatic machine
■
Connector savers (feedthrough) preserve permanently mounted connectors
in high use applications
■
Choice of sizes — Size 1
through 5 for Series 109,
standard density with 9,
15, 25, 37 and 50 contacts;
Size 1 through 6 for Series
90, high density with 15, 26,
44, 62, 78 and 104 contacts
Series 109 standard density
connectors are available
with cavities for power or
coaxial contacts mixed with
size 20 signal contacts
■
Right-angle and straight PC
board connectors in Series
109, standard density
■
Preloaded, straight-posted
connectors available in
Series 90, high density
■
Preloaded, solder cup
connectors available in
Series 109, standard density
■
Produced under a Quality
Management System certified to ISO 9001
A copy of the
ISO9001d
■
certificate is available
upon request
In addition to the complete
selection of standard military subminiature D-type
connectors, TE Connectivity
offers special application
versions such as connectors which mix power/coax
cavities with size 20 signal
contacts; feed-through connectors which provide a disposable interface for high
use applications; and special non-magnetic connectors with a rubber grommet
on the rear, for strain relief.
Series 109 and Series 90
military connectors conform
to the latest amendments
of the MIL-DTL-24308
specification and thus are
intermateable with similar
connectors in the same
sizes from other manufacturers. A broad range of
connectors is included in
this catalog, complemented
by a variety of commercial
cable clamps and mating
hardware, which can be
found in catalog 1307612.
Each AMPLIMITE crimp connector has metal clips which
retain the pins and sockets
after they are loaded into the
inserts from the rear.
Series 109 connectors
accept size 20 contacts,
while Series 90 connectors
accept size 22 contacts.
Cavity spacing conforms
to military specifications.
Size 20 and size 22 pins
and sockets are designed
for an 8-indent crimp. They
are supplied loose-piece for
crimping in a standard
M22520/2 hand operated
tool or tape-mounted for
high speed application
by an AMP-TAPEMATIC
Stripper/Crimper Machine.
Series 90 and Series 109
connectors preloaded
with contacts are available
for printed circuit board
mounting.
8
Special Series 109 connectors with power/coax cavities accept power contacts
for 18 through 8 AWG
[0.8-8 mm2] wire or coaxial
contacts for RG/U 174,
188A and 316 cable, in
combination with standard
size 20 signal contacts.
Rectangular Pin and Socket Connectors
■
AMPLIMITE Military Subminiature D Connectors are
compact pin and socket
connectors especially
designed for high density
packages. They are ideally
suited for applications
such as military equipment,
ground support devices,
computer peripheral equipment, modems and industrial instrumentation.
A complete range of
non-military AMPLIMITE
subminiature D connectors, contacts and
accessories are shown
in catalog 1307612,
available on request from TE.
ie
rtif
Ce
8-35
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Subminiature
Connectors, Series
Connectors
109 (Continued)
(Continued)
Introduction (Continued)
Connector savers extend life in high-use applications.
Connectors for crimp, snap-in contacts are available
in both series, standard shells and non-magnetic,
plus non-magnetic with rear rubber grommet.
Straight posted versions available in both (Series 109)
standard density and (Series 90) high density
connectors.
Coax or power contacts can be mixed with signal
contacts.
ULTRA-LITE AMPLIMITE Connectors for state-of-the-art weight savings and EMI
performance.
Right-angle board mount connectors for Series 109,
standard density connections.
The Series 109 and 90 Blindmate Plug connectors are
designed to prevent butting of contacts during mating.
8-36
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Series 109 Connectors
(Standard Density)
Insert Arrangements
9 Position
(Shell Size 1)
MS 18273-1
15 Position
(Shell Size 2)
MS 18274-1
25 Position
(Shell Size 3)
MS 18275-1
37 Position
(Shell Size 4)
MS 18276-1
50 Position
(Shell Size 5)
MS 18277-1
Note: Mating face of plug shown; receptacle is mirror image.
Performance Specifications
All Series 109 AMPLIMITE military connectors conform to the latest amendments of military
specification MIL-DTL-24308. For more detailed information refer to MIL-DTL-24308.
All Series 109 Connectors are designed for a –67°F to 257°F [–55°C to +125°C]
temperature range.
8
Series 109 contact current rating for Crimp Snap Connectors for MIL-C-39029 7.5 amps in
free air.
Rectangular Pin and Socket Connectors
Series 109 contact current rating for PCB Mount Connectors 5.0 amps per 108-1770.
Technical Documents List
The following technical documents cover the application and performance of AMPLIMITE
Series 109 Connectors, contacts, tooling and accessories.
Military Specifications
MIL-DTL-24308
Connectors, Electric, Rectangular, Miniature Polarized Shell,
Rack and Panel, General Specifications for
AS39029
Contacts, Electrical Connector, General Specification for
NASA Specification
GSFC-S-311-P-4
Non-Magnetic Connectors, General Specification for
Instruction Sheets
408-7516
Application Tooling for MIL-C-39029 Contacts
408-7634
Application and Maintenance for Hand Crimping Tool 90302-1
408-7694-1
Application and Maintenance for Hand Crimping Tool 90312-1
408-7954
Application and Maintenance for Hand Crimping Tool 90374-1
408-7508
Insertion/Extraction Tools 91067-1, 91067-2 and 91067-3
408-7837
Female Screwlock Kit 205817-1 and Male Screw/Retainer
Kit 211883-5
8-37
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Size 20 Crimp Contacts for
Series 109 Connectors
(AS39029)
Size 20 Crimp, Snap-In
Contacts .040 [1.02]
Pin Diameter
Material and Finish
Pin and Socket Body —
aContact Body — Copper alloy,
gold flash .000050–.000100
[0.00127–0.00254] thick nickel
underplate.
aMating Area — Copper alloy, plated
gold .000050 min thick over
.000050–.000100 [0.00127–0.00254]
thick nickel underplate.
bContact Body & Mating Area —
Copper alloy, plated gold .000050–
.000100 [0.00127–0.00254] thick over
.000050–.000100 [0.00127–0.00254]
thick nickel underplate.
Socket Hood — Passivated stainless
steel.
Wire Size
Range
AWG
[mm2]
Ins. Dia.
(Max.)
Contact
Configuration
Tape Mounted
Contacts
Part Number
Pin
Socket
Pin
Socket
205089-2a
205090-2a
1-205089-3b
1-205090-0b
20-24
0.6-0.2
.072
1.83
20-24
0.6-0.2
.072
1.83
Socket
M39029/63-368
(Supersedes M24308/10-1)
Pin
M39029/64-369
(Supersedes M24308/11-1)
Loose Piece
Contacts
Military
AMP
Part No.
Part No.
(M39029/)
64-369
205089-1a
63-368
205090-1a
64-369
1-205089-2b
63-368
205090-9b
Hand Tool
Tool No. Positioner No.
(M22520/)
(M22520/)
02-01
02-01
02-01
02-01
02-08
02-08
02-08
02-08
Contact
Color Band
orange, blue, white
orange, blue, gray
orange, blue, white
orange, blue, gray
Tape mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 8-89).
Notes: 1. These contacts are used in Series 109 military connectors.
2. Insertion/Extraction Tool Part Number 91067-2 (Military Part Number M81969/1-02) is used to install and remove pin and socket contacts.
3. See Instruction Sheet 408-7516 for wire length, tool and selector settings.
4. Color bands are read in the direction of terminal (wire barrel) end to mating end.
Size 20 Crimp Contacts
for Series 109 Connectors
(Industrial Grade)
Size 20 Crimp, Snap-In
Contacts .040 [1.02]
Pin Diameter
Material and Finish
Pin
Pin and Socket Body —
Pin Body — Brass, plated gold
.000030 [0.00076] min thick over
.000050–.000150 [0.00127–0.00381]
thick nickel underplate.
Socket Body — Brass, plated gold
.000010 [0.00025] min thick over
.000050–.000150 [0.00127–0.00381]
thick nickel underplate.
Socket Clip — Copper alloy, plated
gold .000050 [0.00013] min thick over
.000050–.000150 [0.00127–0.00381]
thick nickel underplate.
Wire Size
Range
AWG
[mm2]
Ins. Dia.
(Max.)
20-24
0.6-0.2
.072
1.83
18
0.8
.083
2.11
Socket
Tape Mounted
Contact
Contacts
Configuration Part Number
Pin
Socket
Pin
Socket
1218266-4
1218267-4
1218266-2
1218267-2
Loose Piece
Contacts
Part Number
1218266-3
1218267-3
1218266-1
1218267-1
Hand Tool
Tool No.
Positioner No.
(M22520/)
(M22520/)
02-01
02-08
02-01
02-08
02-01
02-08
02-01
02-08
Tape mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 8-89).
Notes: 1. These contacts are used in Series 109 connectors.
2. Insertion/Extraction Tool Part Number 91067-2 (Military Part Number M81969/1-02) is used to install and
remove pin and socket contacts.
3. See Instruction Sheet 408-7516 for wire length, tool and selector settings.
8-38
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Size 20 Posted Contacts
for Series 109 Connectors
Material and Finish
Pin and Socket Body —
Leaded nickel copper or beryllium copper, plated per chart below
Socket Hood —
See chart below
Pin
(See Drawing Number 212565 for
Latest Configuration)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-2 or
MIL Number M81969/1-02
Insertion tip, for replacement
Part Number 126195-3
Extraction tip, for replacement
Part Number 126195-4
Notes:
1. Contacts on this page can be
used with connectors on pages
8-43 to 8-48, 8-62, 8-63 and 8-84.
2. Mating End of pin and socket
complies with MIL-C-39029.
3. See page 8-91 for PCB layouts.
Socket
(See Drawing Number 208778 for
Latest Configuration)
.375
Max.
[9.53]
Ref.
8
Rectangular Pin and Socket Connectors
C
Post Extension When Used in a
Standard Connector
Post
Diameter
± .002 [± .050]
Post
Extension
C ± .025 [± 0.63]
.018
0.46
.325
8.25
1-212565-0
1-208778-0
.018
0.46
.325
8.25
—
1-208778-1
.018
0.46
.240
6.10
—
1-208778-2
Part Numbers
Pin
Socket
Contact
Plating
Gold .000050–.000100 [0.00127–0.00254]
thick over .000150–.000250
[0.00381–0.00635] thick copper underplate
Gold .000050–.000100 [0.00127–0.00254]
thick over .000050–.000150
[0.00127–0.00381] thick nickel underplate
Gold .000050–.000100 [0.00127–0.00254]
thick over .000150–.000250
[0.00381–0.00635] thick copper underplate
Socket Hood
Material and Finish
Passivated Stainless Steel
Passivated Stainless Steel
Passivated Stainless Steel
8-39
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Size 20 Posted Contacts for
Series 109 Connectors (High
Current Upgrade Program)
Standard Size 20 Socket
The High Current Size 20 contact has
been designed to fit into the Series 109
AMPLIMITE Connectors per MIL-C24308.
High Current
Size 20 Socket
Material
Standard Size 20 Pin
Body — Copper Alloy
Louvertac Band — Beryllium Copper
Finish
High Current
Size 20 Pin
Louvertac Band
Body — Gold
Louvertac Band — Gold
Current-Carrying Capacity. The High
Current Size 20 contact with a 20 gage
wire attached to the .030 [.762] diameter
solder tail acquired an initial 86°F
[30°C] T-Rise of 11.85 amps in free air.
.040
[1.02]
.030
[0.76]
.9
[23]
Pin Part Number 194081-1
.20
[5.1]
Free
Dia.
.030
[0.76]
.048
[1.22]
Multiple contact point due to hyperbolic
shape.
.9
[23]
Socket Part Number 194083-1
Solder Tail
37 Plcs.
The contacts can be sold loose piece or
installed into any of the MIL Standard
connectors.
2.32 [59.08]
2.31 [58.57]
.270 [6.90]
.330 [8.40]
.370 [9.39]
.360 [9.14]
Plug
.460 [11.68] Assy.
.430 [10.92]
.075 [1.90]
.055 [1.39]
.040 [1.01]
.020 [0.51]
Pin and Socket
Insertion/Extraction Tool
Part Number 91067-2 or MIL number
M81969/1-02
Insertion tip, for replacement
Part Number 126195-3
Extraction tip, for replacement
Part Number 126195-4
.439 [11.15]
.419 [10.63]
.085 [2.15]
.065 [1.65]
Mating Face
Mating Face
.070 [1.78]
.030 [.076]
Receptacle
Assy.
.375
Max. Ref.
[9.52]
.360 [9.10]
.300 [7.60]
Solder Tail
37 Plcs.
Typical Fully-Loaded 37 Position
Plug and Receptacle
Note: 1. High Current contacts with Louvertac bands are NOT intermateable with any other contact.
8-40
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Crimp, Series 109,
Standard Density Connectors
(MIL Qualified)
H
Material and Finish
A
Shell — Steel, cadmium plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel
B
± .005
[± 0.13]
± .010
[± 0.25]
.120 ± .005
Dia.
[3.05 ± 0.13]
2 Holes
± .005
[± 0.13]
F
± .010
± .015
[± 0.38]
G [± 0.25]
Related Product Data
Cavity Identification — page 8-39
Contacts — pages 8-40 to 8-42
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
C
± .005
[± 0.13]
D
± .015
[± 0.38]
Mating Face
J
K
± .010
[± 0.25]
± .006 [0.15] (Plug)
± .005 [0.13] (Rcpt)
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
.031 ± .005
[0.79 ± 0.13]
.086–.091
Dia.
[2.18–2.31]
Attention: Connector Marking
.130
Max.
[3.30]
.070
Max.
[1.78]
E
.375
[9.53]
Max.
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Series 109 Plugs per MIL-DTL-24308
No. of
Contact
Pos.
(Shell
Size)
A
B
(Inside) (Inside)
C
Dimensions
D
E
F
G
H
J
Standard Mount
Military
AMP
Part No.
Part No.
M24308/
K
.666
16.92
.329
8.36
.984 1.213 .759 .494 .422 .422 .235
24.99 30.81 19.28 12.55 10.72 10.72 5.97
.030
0.76
15
(2)
.994
25.25
.329
8.36
1.312 1.541 1.083 .494 .422 .422 .235
33.32 39.14 27.51 12.55 10.72 10.72 5.97
.030
0.76
25
(3)
1.534
38.96
.329
8.36
1.852 2.088 1.625 .494 .422 .426 .230
47.04 53.04 41.3 12.55 10.72 10.82 5.84
.039
0.99
37
(4)
2.182
55.42
.329
8.36
2.500 2.729 2.272 .494 .422 .426 .230
63.5 69.32 57.71 12.55 10.72 10.82 5.84
.039
0.99
50
(5)
2.079
52.81
.441
11.2
2.406 2.635 2.178 .605 .534 .426 .230
61.11 66.93 55.32 15.37 13.56 10.82 5.84
.039
0.99
4-259F
4-1F
4-260F
4-2F
4-261F
4-3F
4-262F
4-4F
4-263F
4-5F
205162-1
205556-2
205164-1
205558-2
205166-1
205560-2
205168-1
205562-2
205170-1
205564-2
4-324F
4-302F
4-325F
4-303F
4-326F
4-304F
4-327F
4-305F
4-328F
4-306F
205412-1
205486-2
205408-1
205409-2
205413-1
205487-2
205414-1
205488-2
205415-1
205431-2
Description
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
only
with pins
only
with pins
only
with pins
only
with pins
only
with pins
8
Rectangular Pin and Socket Connectors
9
(1)
Floating
Bushing Mount
Military
AMP
Part No.
Part No.
M24308/
Series 109 Receptacles per MIL-DTL-24308
No. of
Contact
Pos.
A
B
C
(Shell (Outside) (Outside)
Size)
Dimensions
D
E
F
G
H
J
K
9
(1)
.643
16.33
.311 .984 1.213 .759 .494 .422 .429
7.9 24.99 30.81 19.28 12.55 10.72 10.9
.243
6.17
.030
0.76
15
(2)
.971
24.66
.311 1.312 1.541 1.083 .494 .422 .429
7.9 33.32 39.14 27.51 12.55 10.72 10.9
.243
6.17
.030
0.76
25
(3)
1.511
38.38
.311 1.852 2.088 1.625 .494 .422 .429
7.9 47.04 53.04 41.3 12.55 10.72 10.9
.243
6.17
.039
0.99
37
(4)
2.159
54.84
.311 2.500 2.729 2.272 .494 .422 .429
7.9 63.5 69.32 57.71 12.55 10.72 10.9
.243
6.17
.039
0.99
50
(5)
2.064
52.43
.423 2.406 2.635 2.178 .605 .534 .429
10.74 61.11 66.93 55.32 15.37 13.56 10.9
.243
6.17
.039
0.99
Standard Mount
Military
AMP
Part No.
M24308/ Part No.
2-281F
2-1F
2-282F
2-2F
2-283F
2-3F
2-284F
2-4F
2-285F
2-5F
205161-1
205555-2
205163-1
205557-2
205165-1
205559-2
205167-1
205561-2
205169-1
205563-2
Floating
Bushing Mount
Military
AMP
Part No. Part
No.
M24308/
2-292F
2-23F
2-293F
2-24F
2-294F
2-25F
2-295F
2-26F
2-296F
2-27F
205416-1
205483-2
205417-1
205433-2
205418-1
205484-2
205419-1
205485-2
205420-1
205432-2
Description
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Notes: 1. Size 20 contacts supplied with connectors are loose piece.
2. “F” is stamped on connectors following M24308 Part Number as required. -“F” designates cadmium shell plating.
3. See pages 8-99 through 8-103 (Military to AMP Part Number cross reference) for additional part numbers.
8-41
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Crimp, Series 109,
Standard Density Connectors
(MIL Qualified) — Zinc Plated
RoHS Compliant
H
A
Material and Finish
Shell — Steel, zinc plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel
B
F
C
± .005
[± 0.13]
D
J
± .010
[± 0.25]
G [± 0.25]
± .006 [0.15] (Plug)
± .005 [0.13] (Rcpt)
.031 ± .005
[0.79 ± 0.13]
.086–.091
Dia.
[2.18–2.31]
Attention: Connector Marking
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
± .010
± .015
[± 0.38]
± .015
[± 0.38]
Mating Face
K
± .010
[± 0.25]
.120 ± .005
Dia.
[3.05 ± 0.13]
2 Holes
± .005
[± 0.13]
Related Product Data:
Cavity Identification — page 8-39
Contacts — pages 8-40 to 8-42
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
± .005
[± 0.13]
.130
Max.
[3.30]
.070
Max.
[1.78]
E
.375
[9.53]
Max.
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Series 109 Plugs per MIL-DTL-24308
No. of
Contact
Pos.
(Shell
Size)
A
B
(Inside) (Inside)
C
Dimensions
D
E
F
G
H
J
Floating
Bushing Mount
Military
AMP
Part No. Part
No.
M24308/
Standard Mount
Military
AMP
Part No.
M24308/ Part No.
K
9
(1)
.666
16.92
.329
8.36
.984 1.213 .759 .494 .422 .422 .235
24.99 30.81 19.28 12.55 10.72 10.72 5.97
.030
0.76
15
(2)
.994
25.25
.329
8.36
1.312 1.541 1.083 .494 .422 .422 .235
33.32 39.14 27.51 12.55 10.72 10.72 5.97
.030
0.76
25
(3)
1.534
38.96
.329
8.36
1.852 2.088 1.625 .494 .422 .426 .230
47.04 53.04 41.3 12.55 10.72 10.82 5.84
.039
0.99
37
(4)
2.182
55.42
.329
8.36
2.500 2.729 2.272 .494 .422 .426 .230
63.5 69.32 57.71 12.55 10.72 10.82 5.84
.039
0.99
50
(5)
2.079
52.81
.441
11.2
2.406 2.635 2.178 .605 .534 .426 .230
61.11 66.93 55.32 15.37 13.56 10.82 5.84
.039
0.99
4-259
4-1
4-260
4-2
4-261
4-3
4-262
4-4
4-263
4-5
1757819-1
1757819-6
1757819-2
1757819-7
1757819-3
1757819-8
1757819-4
1757819-9
1757819-5
1-1757819-0
4-324
4-302
4-325
4-303
4-326
4-304
4-327
4-305
4-328
4-306
1757821-1
1757821-6
1757821-2
1757821-7
1757821-3
1757821-8
1757821-4
1757821-9
1757821-5
1-1757821-0
Description
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
Plug
only
with pins
only
with pins
only
with pins
only
with pins
only
with pins
Series 109 Receptacles per MIL-DTL-24308
No. of
Contact
Pos.
A
B
C
(Shell (Outside) (Outside)
Size)
Dimensions
D
E
F
G
H
J
K
9
(1)
.643
16.33
.311 .984 1.213 .759 .494 .422 .429
7.9 24.99 30.81 19.28 12.55 10.72 10.9
.243
6.17
.030
0.76
15
(2)
.971
24.66
.311 1.312 1.541 1.083 .494 .422 .429
7.9 33.32 39.14 27.51 12.55 10.72 10.9
.243
6.17
.030
0.76
25
(3)
1.511
38.38
.311 1.852 2.088 1.625 .494 .422 .429
7.9 47.04 53.04 41.3 12.55 10.72 10.9
.243
6.17
.039
0.99
37
(4)
2.159
54.84
.311 2.500 2.729 2.272 .494 .422 .429
7.9 63.5 69.32 57.71 12.55 10.72 10.9
.243
6.17
.039
0.99
50
(5)
2.064
52.43
.423 2.406 2.635 2.178 .605 .534 .429
10.74 61.11 66.93 55.32 15.37 13.56 10.9
.243
6.17
.039
0.99
Standard Mount
Military
AMP
Part No.
M24308/ Part No.
2-281 1757820-1
2-1
1757820-6
2-282 1757820-2
2-2
1757820-7
2-283 1757820-3
2-3
1757820-8
2-284 1757820-4
2-4
1757820-9
2-285 1757820-5
2-5 1-1757820-0
Floating
Bushing Mount
Military
AMP
Part No. Part
No.
M24308/
2-292 1757822-1
2-23
1757822-6
2-293 1757822-2
2-24
1757822-7
2-294 1757822-3
2-25
1757822-8
2-295 1757822-4
2-26
1757822-9
2-296 1757822-5
2-27 1-1757822-0
Description
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Recept. only
Recept. with sockets
Notes: 1. Size 20 contacts supplied with connectors are loose piece.
2. See pages 8-99 through 8-103 (Military to AMP Part Number cross reference) for additional part numbers.
8-42
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Crimp, Series 109, Standard
Density Connectors
(Industrial Grade)
H
Material and Finish
Shell — Steel, zinc plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel
B
A
± .005
[± 0.13]
± .005
[± 0.13]
± .010
[± 0.25]
± .010
± .015
G [± 0.25]
F [± 0.38]
Related Product Data
Cavity Identification — page 8-39
Contacts — pages 8-40 to 8-42
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
C
± .005
[± 0.13]
D
± .015
[± 0.38]
Mating Face
Attention: Connector Marking
J
.006 [ 0.15] (Plug)
.005 [ 0.13] (Rcpt.)
.030–.070
Typ.
[0.76–1.78]
Connector marking may differ from
package marking.
Note: Meets requirements of
MIL-DTL-24308
K
.010
[ 0.25]
E
.010
[ 0.25]
Clinch Nut Mount
.375 Max.
[9.52]
Series 109 Plugs
Dimensions
A
(Inside)
B
(Inside)
C
D
E
F
G
H
J
K
.666
16.92
.994
25.25
1.534
38.96
2.182
55.42
2.079
52.81
.329
8.36
.329
8.36
.329
8.36
.329
8.36
.441
11.2
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.71
2.178
55.32
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.235
5.97
.235
5.97
.230
5.84
.230
5.84
.230
5.84
.030
0.76
.030
0.76
.039
0.99
.039
0.99
.039
0.99
Standard Mount
Part Number
Description
1218748-1
Plug only
1218748-2
Plug only
1218748-3
Plug only
1218748-4
Plug only
1218748-5
Plug. only
8
Rectangular Pin and Socket Connectors
No. of
Contact
Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Clinch Nut Mount available, contact TE.
Series 109 Receptacles
No. of
Contact
Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Dimensions
A
(Inside)
B
(Inside)
C
D
E
F
G
H
J
K
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.71
2.178
55.32
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.429
10.9
.429
10.9
.429
10.9
.429
10.9
.429
10.9
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.030
0.76
.030
0.76
.039
0.99
.039
0.99
.039
0.99
Clinch Nut
Mount
Part Number
Description
1218749-1
Recept. only
1218749-2
Recept. only
1218749-3
Recept. only
1218749-4
Recept. only
1218749-5
Recept. only
Standard Mount available, contact TE.
8-43
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Non-Magnetic Crimp Plugs,
Series 109, Standard
Density Connectors
(NASA Qualified)
Connector Material and Finish
Shell — Brass, gold plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Copper alloy
Related Product Data
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
J
±.006
[±.005]
.125 Ref.
[3.18] Grommet style only
Pin
Non-Magnetic Plugs per NASA Specification
Pin Contact
Wire Size
Range
26-28
0.15-0.08
20-24
0.6-0.2
No. of
Contact
Pos.
(Shell
Size)
AMP Part No. /
NASA No.
206794-2
—
205089-4
G-10-P1
9
(1)
Strip length .140 [3.56]
Max. insulation diameter .072 [1.83]
Hand tool M22520/2-01 or AMP
Part Number 601966-1
Positioner M22520/2-08 or AMP
Part Number 601966-5
15
(2)
25
(3)
Contact Material and Finish
Copper alloy plated gold
.000050–.000100 [0.00127–0.00254]
thick over .000100–.000150
[0.00254–0.00381] copper underplate
37
(4)
50
(5)
A
B
C
D
Dimensions
E
F
G
H
J
K
NASA
Number
L
.154
.666 .329 .984 1.213 .759 .494 .422 .422 .235 .030 3.91
16.92 8.36 24.99 30.81 19.28 12.55 10.72 10.72 5.97 0.76 .120
3.05
.154
.994 .329 1.312 1.541 1.083 .494 .422 .422 .235 .030 3.91
25.25 8.36 33.32 39.14 27.51 12.55 10.72 10.72 5.97 0.76 .120
3.05
.154
1.534 .329 1.852 2.088 1.625 .494 .422 .426 .230 .039 3.91
38.96 8.36 47.04 53.04 41.3 12.55 10.72 10.82 5.84 0.99 .120
3.05
.154
2.182 .329 2.500 2.729 2.272 .494 .422 .426 .230 .039 3.91
55.42 8.36 63.5 69.32 57.71 12.55 10.72 10.82 5.84 0.99 .120
3.05
.154
2.079 .441 2.406 2.635 2.178 .605 .534 .426 .230 .039 3.91
52.81 11.20 61.11 66.93 55.32 15.37 13.56 10.82 5.84 0.99 .120
3.05
AMP
Part
Number
311P409-1P-B-15 207252-1
311P409-1P-B-12 207252-2
311P409-2P-B-15 206798-1
311P409-2P-B-12 206798-2
311P409-3P-B-15 206800-1
311P409-3P-B-12 206800-2
311P409-4P-B-15 206802-1
311P409-4P-B-12 206802-2
311P409-5P-B-15 206804-1
311P409-5P-B-12 206804-2
Non-Magnetic Plugs With Silicone Rubber Rear Grommet1
No. of
Contact
Pos.
(Shell
Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-2 or
MIL Number M81969/1-02
Insertion tip, for replacement
Part Number 126195-3
Extraction tip, for replacement
Part Number 126195-4
1
A
B
.666 .329
16.92 8.36
.994 .329
25.25 8.36
1.534 .329
38.96 8.36
2.182 .329
55.42 8.36
2.079 .441
52.81 11.20
Dimensions
F
G
C
D
E
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.71
2.178
55.32
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
Part Number
H
J
K
L
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.235
5.97
.235
5.97
.230
5.84
.230
5.84
.230
5.84
.030
0.76
.030
0.76
.039
0.99
.039
0.99
.039
0.99
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
211638-4
211639-4
211640-4
211641-4
211642-4
Grommet provided for cable strain relief.
8-44
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Non-Magnetic Crimp
Receptacles, Series 109,
Standard Density Connectors
(NASA Qualified)
Connector Material and Finish
Shell — Brass, gold plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Copper alloy
Related Product Data
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
H
.125 Ref.
[3.18] Grommet style only
Socket
Non-Magnetic Receptacles per NASA Specification
Socket Contact
Wire Size
Range
26-28
0.15-0.08
20-24
0.6-0.2
No. of
Contact
Pos.
(Shell
Size)
AMP Part No. /
NASA No.
206795-1
—
206793-1
G-10-S1
Strip length .140 [3.56]
Max. insulation diameter .072 [1.83]
Hand tool M22520/2-01 or AMP
Part Number 601966-1
Positioner M22520/2-08 or AMP
Part Number 601966-5
Copper alloy plated gold
.000050–.000100 [0.00127–0.00254]
thick over .000100–.000150
[0.00254–0.00381] copper underplate
B
C
D
Dimensions
E
F
G
H
NASA
Number
J
9
(1)
.643
16.33
.311
7.9
.984 1.213
24.99 30.81
.759 .494 .422
19.28 12.55 10.72
.030
0.76
15
(2)
.971
24.66
.311
7.9
1.312 1.541
33.32 39.14
1.083 .494 .422
27.51 12.55 10.72
.030
0.76
25
(3)
1.511
38.38
.311
7.9
1.852 2.088
47.04 53.04
1.625 .494 .422
41.3 12.55 10.72
.039
0.99
37
(4)
2.159
55.42
.311
7.9
2.500 2.729
63.5 69.32
2.272 .494 .422
57.71 12.55 10.72
.039
0.99
50
(5)
2.064 .423 2.406 2.635
52.43 10.74 61.11 66.93
2.178 .605 .534
55.32 15.37 13.56
.039
0.99
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
AMP
Part
Number
311P409-1S-B-15 207253-1
311P409-1S-B-12 207253-2
311P409-2S-B-15 206799-1
311P409-2S-B-12 206799-2
8
311P409-3S-B-15 206801-1
311P409-3S-B-12 206801-2
Rectangular Pin and Socket Connectors
Contact Material and Finish
A
311P409-4S-B-15 206803-1
311P409-4S-B-12 206803-2
311P409-5S-B-15 206805-1
311P409-5S-B-12 206805-2
Non-Magnetic Receptacles With Silicone Rubber Rear Grommet1
No. of
Contact
Pos.
(Shell
Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-2 or
MIL Number M81969/1-02
Insertion tip, for replacement
Part Number 126195-3
Extraction tip, for replacement
Part Number 126195-4
1
Dimensions
E
A
B
C
D
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.71
2.178
55.32
F
G
H
J
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.030
0.76
.030
0.76
.039
0.99
.039
0.99
.039
0.99
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
Part Number
211633-4
211634-4
211635-4
211636-4
211637-4
Grommet provided for cable strain relief.
8-45
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Crimp, Blindmate Plugs,
Series 109, Standard
Density Connectors
Materials and Finish
1
Shell, Front — Aluminum alloy,
cadmium plated with yellow chromate
2 Shell, Front — Aluminum alloy,
zinc plated with yellow trichromate
1 Shell, Rear — Steel, cadmium
plated with yellow chromate
2 Shell, Rear — Steel, zinc plated
with yellow trichromate
Insert Assembly — Approved material per MIL-DTL-24308
Retention Clips — Stainless steel
A
B
± .005
[± 0.13]
± .005
[± 0.13]
C
± .005
[± 0.13]
Related Product Data
Cavity Identification — page 8-39
Contacts — pages 8-40 to 8-42
Mounting Specifications —
page 8-90
Mating information contained on
page 8-90 does not pertain to Blindmate
design. Flange to flange spacing can be
a max. of .270 [6.86].
.257 ± .003
[6.53 ± 0.08]
.065–.090
[1.65–2.29]
.482 ± .015
[12.24 ± 0.38]
No. of
Contact
Pos.
(Shell
Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
A
B
C
.656
16.66
.984
25.0
1.524
38.71
2.172
55.17
2.082
52.88
.324
8.23
.324
8.23
.324
8.23
.324
8.23
.444
11.28
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
Dimensions
D
E
1.224
31.09
1.552
39.42
2.099
53.31
2.740
69.60
2.646
67.21
.769/.750
19.53/19.05
1.093/1.074
27.76/27.28
1.635/1.616
41.53/41.05
2.282/2.263
57.96/57.48
2.188/2.167
55.58/55.04
F
G
.506
12.85
.506
12.85
.506
12.85
.506
12.85
.617
15.67
.432/.413
10.97/10.49
.432/.413
10.97/10.49
.432/.413
10.97/10.49
.432/.413
10.97/10.49
.544/.525
13.82/13.34
Part Number
445005-11
5-445005-12
445006-11
5-445006-12
445007-11
5-445007-12
445008-11
5-445008-12
445009-11
5-445009-12
See Material and Finish above.
See Material and Finish for RoHS compliant Part Numbers above.
Note: See page 5-182 for Blindmate coax/signal combinations.
1
2
8-46
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Straight PCB, Series 109,
Standard Density Connectors
(MIL Qualified)
A
J
.030–.070
[0.76–1.78]
± .005
Rcpt.
[± 0.13]
± .005
B
Plug
[± 0.13]
B
E
Material and Finish
± .015
[± 0.38]
± .015
[± 0.38]
D
± .010
[± 0.25]
Dia. (See Chart for
Standard Dia.)
G
K
± .005
[± 0.13]
± .010
[± 0.25]
10° Typ.
Rcpt.
Shell — Steel, cadmium plated
Insert — Approved material per
MIL-DTL-24308
Contact — Copper alloy plated gold
over nickel underplate*
Spacer — Aluminum alloy, Iridite finish
C
D
± .005
[± 0.13]
± .005
[± 0.13]
M
Standard Shell
Related Product Data
MS
Shell
Size
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 7-91 or
TE Connectivity customer drawing.
*Socket Body — .000050 [0.00127]
min. gold over .000050 [0.00127] min.
nickel
Mating Area — .000050 [0.00127]
min. gold over .000050 [0.00127] min.
nickel
Plug Body — .000050 [0.00127] min.
gold over .000050 [0.00127] min. nickel
Connector
Style
Plug
1
Receptacle
Plug
2
Receptacle
Plug
3
Receptacle
Plug
4
Receptacle
.246
[6.25]
Plug
5
Receptacle
.120 ± .005
[3.05 ± 0.13]
2 Holes
Post extension
Plug
(See Chart
for Standard Lengths)
± .010
[± 0.25]
A
B
C
D
1.213
30.81
1.213
30.81
1.541
39.14
1.541
39.14
2.088
53.04
2.088
53.04
2.729
69.32
2.729
69.32
2.635
66.93
2.635
66.93
.666
16.92
.643
16.33
.994
25.25
.971
24.66
1.534
38.96
1.511
38.38
2.182
55.42
2.159
54.84
2.079
52.81
2.064
52.43
.984
24.99
.984
24.99
1.312
33.32
1.312
33.32
1.852
47.04
1.852
47.04
2.500
63.5
2.500
63.5
2.406
61.11
2.406
61.11
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.441
11.20
.423
10.74
Dimensions
E
G
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.605
15.37
.759
19.28
.759
19.28
1.083
27.51
1.083
27.51
1.625
41.28
1.625
41.28
2.272
57.71
2.272
57.71
2.178
55.32
2.178
55.32
H
± .010
[± 0.25]
H
J
K
M
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.534
13.55
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.039
0.99
.030
0.76
.039
0.99
.030
0.76
.039
0.99
.030
0.76
.238/.229
6.04/5.81
.248/.238
6.29/6.04
.238/.229
6.04/5.81
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.422
10.72
.429
10.90
.422
10.72
.429
10.90
.426
10.82
.429
10.90
.426
10.82
.429
10.90
.426
10.82
.429
10.90
Spacer
Receptacle Assemblies
Plug Assemblies
Zinc Plated Shells
No.
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
Post
Dia.
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
Post
Ext.
± .020 [± 0.51]
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Military
Part No.
M24308/
Part No.
23-1
1757828-1
23-1F
23-2
1757828-2
23-3
23-4
Zinc Plated Shells
Shell
Size
No.
Pos.
443975-1
1
9
23-2F
443975-2
2
15
1757828-3
23-3F
443975-3
3
25
1757828-4
23-4F
443975-4
4
37
23-5
1757828-5
23-5F
443975-5
5
50
23-7
1757830-1
23-7F
443976-1
1
9
23-8
1757830-2
23-8F
443976-2
2
15
23-9
1757830-3
23-9F
443976-3
3
25
23-10
1757830-4
23-10F
443976-4
4
37
23-11
1757830-5
23-11F
443976-5
5
50
23-13
1757832-1
23-13F
443977-1
1
9
23-14
1757832-2
23-14F
443977-2
2
15
23-15
1757832-3
23-15F
443977-3
3
25
23-16
1757832-4
23-16F
443977-4
4
37
23-17
1757832-5
23-17F
443977-5
5
50
23-19
1757834-1
23-19F
443978-1
1
9
23-20
1757834-2
23-20F
443978-2
2
15
23-21
1757834-3
23-21F
443978-3
3
25
23-22
1757834-4
23-22F
443978-4
4
37
23-23
1757834-5
23-23F
443978-5
5
50
Post
Dia.
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
040
1.02
.040
1.02
.040
1.02
Post
Ext.
± .020 [± 0.51]
Cadmium
Plated Shells
Military
Part No. Part No.
M24308/
Military
Part No.
M24308/
Part No.
24-1
1757827-1
24-1F
1218124-1
24-2
1757827-2
24-2F
1218124-2
24-3
1757827-3
24-3F
1218124-3
24-4
1757827-4
24-4F
1218124-4
24-5
1757827-5
24-5F
1218124-5
24-7
1757829-1
24-7F
1218125-1
24-8
1757829-2
24-8F
1218125-2
24-9
1757829-3
24-9F
1218125-3
24-10
1757829-4
24-10F
1218125-4
24-11
1757829-5
24-11F
1218125-5
24-13
1757831-1
24-13F
1218126-1
24-14
1757831-2
24-14F
1218126-2
24-15
1757831-3
24-15F
1218126-3
24-16
1757831-4
24-16F
1218126-4
24-17
1757831-5
24-17F
1218126-5
24-19
1757833-1
24-19F
1218127-1
24-20
1757833-2
24-20F
1218127-2
24-21
1757833-3
24-21F
1218127-3
24-22
1757833-4
24-22F
1218127-4
24-23
1757833-5
24-23F
1218127-5
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
8
Rectangular Pin and Socket Connectors
Shell
Size
Cadmium
Plated Shells
Military
Part No. Part No.
M24308/
8-47
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Straight PCB, Series 109,
Standard Density Connectors
(Industrial Grade)
A
Material and Finish
Shell — Steel, cadmium or zinc plated
Insert — Approved material per
MIL-DTL-24308
Contact — Copper alloy plated gold
over nickel underplate*
Spacer — Aluminum alloy, Iridite finish
E
± .015
[± 0.38]
± .015
[± 0.38]
± .010
[± 0.25]
J
.030–.070
[0.76–1.78]
± .005
B
Rcpt.
[± 0.13]
± .005
B
Plug
[± 0.13]
Dia. (See Chart for
Standard Dia.)
G
K
± .005
D
[± 0.13]
± .010
[± 0.25]
.246
[6.25]
10° Typ.
Rcpt.
C
D
± .005
[± 0.13]
± .005
[± 0.13]
Post extension
Plug
M
Standard Shell
(See Chart
for Standard
Lengths)
± .010
[± 0.25]
.120 ± .005
[3.05 ± 0.13]
2 Holes
H
± .010
[± 0.25]
Spacer
Related Product Data
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
*aSocket Body and Mating Area —
.000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel
Plug Body and Mating Area —
.000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel
b Mating Area — Copper alloy with
.000030 [0.00076] min. gold plate
over .000050 [0.00127] min. nickel
underplate
Product Specification — 108-1770
MS
Shell
Size
Connector
Style
Plug
1
Receptacle
Plug
2
Receptacle
Plug
3
Receptacle
Plug
4
Receptacle
Plug
5
Receptacle
A
B
C
D
1.213
30.81
1.213
30.81
1.541
39.14
1.541
39.14
2.088
53.04
2.088
53.04
2.729
69.32
2.729
69.32
2.635
66.93
2.635
66.93
.666
16.92
.643
16.33
.994
25.25
.971
24.66
1.534
38.96
1.511
38.38
2.182
55.42
2.159
54.84
2.079
52.81
2.064
52.43
.984
24.99
.984
24.99
1.312
33.32
1.312
33.32
1.852
47.04
1.852
47.04
2.500
63.5
2.500
63.5
2.406
61.11
2.406
61.11
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.329
8.36
.311
7.90
.441
11.20
.423
10.74
Dimensions
E
G
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.605
15.37
.759
19.28
.759
19.28
1.083
27.51
1.083
27.51
1.625
41.28
1.625
41.28
2.272
57.71
2.272
57.71
2.178
55.32
2.178
55.32
H
J
K
M
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.534
13.55
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.039
0.99
.030
0.76
.039
0.99
.030
0.76
.039
0.99
.030
0.76
.238/.229
6.04/5.81
.248/.238
6.29/6.04
.238/.229
6.04/5.81
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.236/.224
5.99/5.68
.248/.238
6.29/6.04
.422
10.72
.429
10.90
.422
10.72
.429
10.90
.426
10.82
.429
10.90
.426
10.82
.429
10.90
.426
10.82
.429
10.90
8-48
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Straight PCB, Series 109,
Standard Density Connectors
(Industrial Grade) (Continued)
Material and Finish
Shell — Steel, see below
1 Tin Plated RoHS Compliant
Finish — Tin .000400–.000550
[0.01020–0.01400] thick over copper
.000050 [0.00127] min. thick
2 Zinc Plated RoHS Compliant
Finish — Zinc .000200–.000400
[0.00508–0.01016] thick, yellow trivalent
chromate
Shell
Size
No.
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
Post
Ext.
± .020 [± 0.51]
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Related Product Data
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
*aSocket Body and Mating Area —
.000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel
Plug Body and Mating Area —
.000050 [0.00127] min. gold over
.000050 [0.00127] min. nickel
b Mating Area — Copper alloy with
.000030 [0.00076] min. gold plate
over .000050 [0.00127] min. nickel
underplate
Product Specification — 108-1770
Receptacle Part Number
Tin Plated
Shellsa
Tin Plated
Shellsb
Shell
Size
Zinc Plated
RoHS Shellsa,2
No.
Pos.
1218826-11
1218293-11
1218289-1
1
9
1218826-21
1218293-21
1218289-2
2
15
1218826-31
1218293-31
1218289-3
3
25
1218826-41
1218293-41
1218289-4
4
37
1218826-51
1218293-51
1218289-5
5
50
1218827-11
1218294-11
1218290-1
1
9
1218827-21
1218294-21
1218290-2
2
15
1218827-31
1218294-31
1218290-3
3
25
1218827-41
1218294-41
1218290-4
4
37
1218827-51
1218294-51
1218290-5
5
50
—
—
1218291-1
1
9
—
—
1218291-2
2
15
—
—
1218291-3
3
25
—
—
1218291-4
4
37
—
—
1218291-5
5
50
1218829-11
—
1218292-1
1
9
1218829-21
—
1218292-2
2
15
1218829-31
—
1218292-3
3
25
1218829-41
—
1218292-4
4
37
1218829-51
—
1218292-5
5
50
1 See Tin Plated RoHS compliant finish above.
2 See Zinc Plated RoHS compliant finish above.
Post
Dia.
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
040
1.02
.040
1.02
.040
1.02
Plug Part Number
Post
Ext.
± .020 [± 0.51]
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Tin Plated
Shellsa
Zinc Plated
RoHS Shellsa,2
1218374-11
1218378-1
1218374-21
1218378-2
1218374-31
1218378-3
1218374-41
1218378-4
1218374-51
1218378-5
1218375-11
1218379-1
1218375-21
1218379-2
1218375-31
1218379-3
1218375-41
1218379-4
1218375-51
1218379-5
—
1218380-1
—
1218380-2
—
1218380-3
—
1218380-4
—
1218380-5
1218377-11
1218381-1
1218377-21
1218381-2
1218377-31
1218381-3
1218377-41
1218381-4
1218377-51
1218381-5
8
Rectangular Pin and Socket Connectors
3
Post
Dia.
Insert — Approved material per
MIL-DTL-24308
Contact — Copper alloy plated gold
over nickel underplate*
Spacer — Aluminum alloy, Iridite finish
2 See Tin Plated RoHS compliant finish above.
3 See Zinc Plated RoHS compliant finish above.
8-49
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Straight PCB, Series 109,
Make First/Break Last
Sub-D Connectors
(Industrial Grade)
B
Material and Finish
E
Shell — Steel, cadmium or tin plated
Insert — Polyester per MIL-M-24519
Contact — Copper alloy with .000030
[0.00076] min. gold plate over .000050
[0.00127] min. nickel underplate
3 Regular Length Contact Location:
1, 6, and 9
4 Short Length Contact Location:
2 thru 5, 7, and 8
5 Finish — Cadmium per QQ-P-416
6 Finish — Tin plated per MIL-T-10727
D
C
A
.229–.238
[5.82–6.05]
.134
[3.40]
Shell, Front
Mat’l: Steel per ASTM A 109
or Equivalent Finish5,6
J
K
M
Shell, Rear
Mat’l: Steel per ASTM A 109
or Equivalent Finish5,6
Insert
Mat’l: Polyester per MIL-M-24519
Contact
Mat’l: Copper Alloy Type GLCP-30F Color, Black
.224
Max.
[5.69]
.168–.208
[4.27–5.28]
Except for
Receptacle Size 2:
.453–.493
[11.51–12.52]
Finish: Gold Plate .000030 [0.00076] Min. Thk. in Contact Area
Over Nickel Plate .000050 [0.00127] Min. Thk.
Ø .037–.042
9 Plcs.
[0.94–1.09]
H
G
MS
Shell
Size
Connector
Style
Plug
1
Receptacle
2
Receptacle
3
Plug
B
C
D
E
1.213
30.81
1.213
30.81
1.541
39.14
2.088
53.04
.666
16.92
.643
16.33
.971
24.66
1.534
38.96
.984
24.99
.984
24.99
1.312
33.32
1.852
47.04
.329
8.36
.311
7.90
.311
7.90
.329
8.36
.494
12.55
.494
12.55
.494
12.55
.494
12.55
Plug Assemblies
Shell
Size
No.
Pos.
1
9
3
25
Dimensions
G
A
.759
19.28
.759
19.28
1.083
27.51
1.625
41.28
H
J
K
M
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.020/.040
0.51/1.02
.238/.248
6.05/6.30
.238/.248
6.05/6.30
.029/.049
0.74/1.24
.223
5.66
.178
4.52
.178
4.52
.217
5.51
.412/.432
10.46/10.97
.419/.439
10.64/11.15
.419/.439
10.64/11.15
.416/.435
10.57/11.07
Receptacle Assemblies
Post
Dia.
.037/.043
0.94/1.09
.037/.043
0.94/1.09
Plug Part Number
Tin Plated
Cadmium Plated
Shells
Shells
Shell
Size
No.
Pos.
443638-2
443638-1
1
9
443631-2
443631-1
2
15
Post
Dia.
.037/.043
0.94/1.09
.037/.043
0.94/1.09
Plug Part Number
Tin Plated
Cadmium Plated
Shells
Shells
443637-2
443637-1
443646-2
443646-1
8-50
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB Plugs,
Series 109, Standard
Density Connectors
(MIL Qualified)
Material and Finish
Shell — Steel, cadmium plated
Insert and Post Spacer — Approved
material per MIL-DTL-24308
Contact — Copper alloy with .000050
[0.00127] min. gold plate over .000050
[0.00127] min. nickel underplate
A
Related Product Data
E
± .015
[± 0.38]
C
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
MS
Shell
Size
Connector
Style
1
H
± .005
[± 0.13]
B
D
± .005
[± 0.13]
1.213
30.81
.666
16.92
2
Plug
.994
25.25
3
Plug
2.088
53.04
1.534
38.96
4
Plug
2.729
69.32
5
Plug
2.635
66.93
C
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
P
± .010
[± 0.25]
± .010
[± 0.25]
(See Chart
For Standard
Lengths)
Standard Dia.)
± .015
[± 0.38]
10° Typ.
.120 ± .005
[3.05 ± 0.38]
2 Holes
P
± .015
[± 0.38]
Shell Size
5 Only
± .010
[± 0.25]
S
R
± .010
[± 0.25]
Rear View
(Contacts, Inserts & Right-Angle
Brackets Omitted for Clarity)
G
H
Post
Ext.
± .020 [± 0.51]
.984
24.99
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
1.312
33.33
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
1.852
47.04
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
2.182
55.42
2.500
63.5
.329
8.36
.494
12.55
.395
10.03
.484
12.29
2.079
52.81
2.406
61.11
.441
10.44
.605
15.37
.507
12.88
.594
15.09
Military
Part No.
M24308/
Part No.
J
K
M
N
P
R
.238/.229
6.04/5.81
.030
0.76
.238/.229
6.04/5.81
.030
0.76
.236/.224
5.99/5.68
.283
7.19
.283
7.19
S
.422
10.72
.112
2.84
.422
10.72
.759
19.28
.422
10.72
.112
2.84
.422
10.72
1.083
27.51
.039
0.99
.426
10.82
.112
2.84
.422
10.72
1.625
29.59
.236/.224
5.99/5.68
.039
0.99
.426
10.82
.112
2.84
.422
10.72
2.272
57.71
.236/.224
5.99/5.68
.039
0.99
.426
10.82
.112
2.84
.534
13.56
2.178
55.32
Plug Assemblies — .040 [1.02] Post Dia.
Cadmium
Plated Shells
Military
Part No.
Part No.
M24308/
Zinc Plated Shells
Shell
Size
No.
Pos.
24-25
1757835-1
24-25F
1218440-1
1
9
24-26
1757835-2
24-26F
1218440-2
2
15
24-27
1757835-3
24-27F
1218440-3
3
25
24-28
1757835-4
24-28F
1218440-4
4
37
24-29
1757835-5
24-29F
1218440-5
5
50
24-31
1757837-1
24-31F
1218441-1
1
9
24-32
1757837-2
24-32F
1218441-2
2
15
24-33
1757837-3
24-33F
1218441-3
3
25
24-34
1757837-4
24-34F
1218441-4
4
37
24-35
1757837-5
24-35F
1218441-5
5
50
24-49
1757839-1
24-49F
1218444-1
1
9
24-50
1757839-2
24-50F
1218444-2
2
15
24-51
1757839-3
24-51F
1218444-3
3
25
24-52
1757839-4
24-52F
1218444-4
4
37
24-53
1757839-5
24-53F
1218444-5
5
50
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Cadmium
Plated Shells
Military
Part No.
Part No.
M24308/
Military
Part No.
M24308/
Part No.
24-37
1757841-1
24-37F
1218442-1
24-38
1757841-2
24-38F
1218442-2
24-39
1757841-3
24-39F
1218442-3
24-40
1757841-4
24-40F
1218442-4
24-41
1757841-5
24-41F
1218442-5
24-43
1757843-1
—
—
24-44
1757843-2
—
—
24-45
1757843-3
—
—
24-46
1757843-4
—
—
24-47
1757843-5
—
—
24-55
1757845-1
24-55F
1218445-1
24-56
1757845-2
24-56F
1218445-2
24-57
1757845-3
24-57F
1218445-3
24-58
1757845-4
24-58F
1218445-4
24-59
1757845-5
24-59F
1218445-5
8
Rectangular Pin and Socket Connectors
15
± .010
[± 0.25]
± .010
[± 0.25]
Post
extension
Dia. (See Chart For
E
Zinc Plated Shells
2
J
D
Plug Assemblies — .030 [0.76] Post Dia.
9
± .010
[± 0.25]
G
Dimensions
1.541
39.14
1
J
N
Plug
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
± .010
[± 0.25]
K
B
No.
Pos.
G
± .005
[± 0.13]
M
A
Shell
Size
± .010
[± 0.25]
.395 ± .010
[10.03 ± 0.25]
± .015
[± 0.38]
Note: The suffix "F" on M24308 part numbers designates cadmium shell plating.
8-51
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB
9, 15, 25 and 37 Positions
Mating Face
Receptacles, Series 109,
Standard Density Connectors
(MIL Qualified)
± .010
G
Material and Finish
Shell — Steel, cadmium or zinc plated
Insert and Post Spacer — Approved
material per MIL-DTL-24308
Contacts —
Socket Body — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
Mating Area — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
.248
Max.
[6.30]
.283 ± .010
[7.19 ± 0.25]
.030 ± .010
[0.76 ± 0.25]
.050 ± .020
[1.27 ± 0.51]
.395 ± .010
[10.03 ± 0.25]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
H
Post Extension
(See chart for
standard lengths)
± .015
[± 0.38]
50 Positions
.248
Max.
[6.30]
Mating Face
± .005
[± 0.13]
G
.507 ± .010
[12.88 ± 0.25]
.050 ± .020
[1.27 ± 0.51]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
No. of
Contact Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
± .005
[± 0.13]
± .015
[± 0.38]
Receptacle Assemblies — .030 [0.76] Post Dia.
Zinc Plated Shells
Shell
Size
8-52
No.
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Military
Part No.
M24308/
H
Post Extension
(See chart for
standard lengths)
± .015
[± 0.38]
Receptacle Assemblies
± .005
[± 0.13]
D
Part No.
Dimensions
A
(Outside)
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
B
(Outside)
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
C
D
F
G
H
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.429
10.97
.429
10.97
.429
10.97
.429
10.97
.429
10.97
.276
7.01
.278
7.06
.274
6.96
.272
6.91
.333
8.46
Receptacle Assemblies — .040 [1.02] Post Dia.
Cadmium
Plated Shells
Military
Part No.
Part No.
M24308/
Zinc Plated Shells
Shell
Size
No.
Pos.
23-25
1757836-1
23-25F
1218434-1
1
9
23-26
1757836-2
23-26F
1218434-2
2
15
23-27
1757836-3
23-27F
1218434-3
3
25
23-28
1757836-4
23-28F
1218434-4
4
37
23-29
1757836-5
23-29F
1218434-5
5
50
23-31
1757838-1
23-31F
1218408-1
1
9
23-32
1757838-2
23-32F
1218408-2
2
15
23-33
1757838-3
23-33F
1218408-3
3
25
23-34
1757838-4
23-34F
1218408-4
4
37
23-35
1757838-5
23-35F
1218408-5
5
50
23-49
1757840-1
23-49F
1218437-1
1
9
23-50
1757840-2
23-50F
1218437-2
2
15
23-51
1757840-3
23-51F
1218437-3
3
25
23-52
1757840-4
23-52F
1218437-4
4
37
23-53
1757840-5
23-53F
1218437-5
5
50
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Cadmium
Plated Shells
Military
Part No.
Part No.
M24308/
Military
Part No.
M24308/
Part No.
23-37
1757842-1
23-37F
1218435-1
23-38
1757842-2
23-38F
1218435-2
23-39
1757842-3
23-39F
1218435-3
23-40
1757842-4
23-40F
1218435-4
23-41
1757842-5
23-41F
1218435-5
23-43
1757844-1
23-43F
1218436-1
23-44
1757844-2
23-44F
1218436-2
23-45
1757844-3
23-45F
1218436-3
23-46
1757844-4
23-46F
1218436-4
23-47
1757844-5
23-47F
1218436-5
23-55
1757846-1
23-55F
1218438-1
23-56
1757846-2
23-56F
1218438-2
23-57
1757846-3
23-57F
1218438-3
23-58
1757846-4
23-58F
1218438-4
23-59
1757846-5
23-59F
1218438-5
Note: The suffix "F" on M24308 part numbers designates cadmium shell plating.
Catalog 1308940
Revised 9-14
www.te.com
± .015
[± 0.38]
.395 ± .010
[10.03 ± 0.25]
± .010
[± 0.25]
.120 ± .005
[3.05 ± 0.13]
Dia.
(2 Holes)
C
F
.283 ± .010
[7.19 ± 0.25]
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
B
± .015
[± 0.38]
[± 0.25]
Related Product Data
A
F
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Related Product Data
Right-Angle, PCB Plugs,
Series 109, Standard Density Cavity Identification — page 8-39
Connectors (Industrial Grade) Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
Product Specification — 108-1770
Material and Finish
Shell — Steel, see below
1 Tin Plated RoHS Compliant
Finish — Tin .000400–.000550
[0.01020–0.01400] thick over copper
.000050 [0.00127] min. thick
2 Zinc Plated RoHS Compliant
Finish — Zinc .000200–.000400
[0.00508–0.01016] thick, yellow trivalent
chromate
Insert and Post Spacer — Approved
material per MIL-DTL-24308
Contact — Copper alloy with .000050
[0.00127] min. gold plate over .000050
[0.00127] min. nickel underplate
A
B
E
H
± .005
[± 0.13]
± .015
[± 0.38]
C
± .010
[± 0.25]
.395 ± .010
[10.03 ± 0.25]
± .015
[± 0.38]
D
± .005
[± 0.13]
G
± .010
[± 0.25]
J
± .010
[± 0.25]
M
P
Standard Dia.)
± .015
[± 0.38]
K
N
± .010
[± 0.25]
10° Typ.
.120 ± .005
[3.05 ± 0.38]
2 Holes
P
± .015
[± 0.38]
Shell Size
5 Only
± .010
[± 0.25]
S
(See Chart
For Standard
Lengths)
Dia. (See Chart For
± .010
[± 0.25]
± .010
[± 0.25]
Post
extension
± .010
[± 0.25]
J
± .005
[± 0.13]
G
R
± .010
[± 0.25]
Rear View
(Contacts, Inserts & Right-Angle
Brackets Omitted for Clarity)
MS
Shell
Size
Connector
Style
A
B
C
D
E
G
H
J
K
M
N
P
R
S
1
Plug
1.213
30.81
.666
16.92
.984
24.99
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
.238/.229
6.04/5.81
.030
0.76
.422
10.72
.112
2.84
.422
10.72
.759
19.28
2
Plug
1.541
39.14
.994
25.25
1.312
33.33
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
.238/.229
6.04/5.81
.030
0.76
.422
10.72
.112
2.84
.422
10.72
1.083
27.51
3
Plug
2.088
53.04
1.534
38.96
1.852
47.04
.329
8.36
.494
12.55
.395
10.03
.484
12.29
.283
7.19
.236/.224
5.99/5.68
.039
0.99
.426
10.82
.112
2.84
.422
10.72
1.625
29.59
4
Plug
5
Plug
2.729
69.32
2.635
66.93
2.182
55.42
2.079
52.81
2.500
63.5
2.406
61.11
.329
8.36
.441
10.44
.494
12.55
.605
15.37
.395
10.03
.507
12.88
.484
12.29
.594
15.09
.283
7.19
.283
7.19
.236/.224
5.99/5.68
.236/.224
5.99/5.68
.039
0.99
.039
0.99
.426
10.82
.426
10.82
.112
2.84
.112
2.84
.422
10.72
.534
13.56
2.272
57.71
2.178
55.32
Dimensions
Plug Assemblies — .030 [0.76] Post Dia.
No.
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Plug Assemblies — .040 [1.02] Post Dia.
Part Number
Tin Plated
Zinc Plated
Shells1
RoHS Shells2
Shell
Size
No.
Pos.
1218830-1
1218831-1
1
9
1218830-2
1218831-2
2
15
1218830-3
1218831-3
3
25
1218830-4
1218831-4
4
37
1218830-5
1218831-5
5
50
1218832-1
1218833-1
1
9
1218832-2
1218833-2
2
15
1218832-3
1218833-3
3
25
1218832-4
1218833-4
4
37
1218832-5
1218833-5
5
50
1218838-1
1218839-1
1
9
1218838-2
1218839-2
2
15
1218838-3
1218839-3
3
25
1218838-4
1218839-4
4
37
1218838-5
1218839-5
5
50
3 See Zinc Plated RoHS compliant finish above.
8
Part Number
Tin Plated
Zinc Plated
Shells1
RoHS Shells2
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
1218834-1
1218835-1
1218834-2
1218835-2
1218834-3
1218835-3
1218834-4
1218835-4
1218834-5
1218835-5
—
1218837-1
—
1218837-2
—
1218837-3
—
1218837-4
—
1218837-5
1218840-1
1218841-1
1218840-2
1218841-2
1218840-3
1218841-3
1218840-4
1218841-4
1218840-5
1218841-5
Rectangular Pin and Socket Connectors
Shell
Size
2 See Tin Plated RoHS compliant finish above.
3 See Zinc Plated RoHS compliant finish above.
8-53
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB
Receptacles, Series 109,
Standard Density Connectors
(Industrial Grade)
Material and Finish
Shell — Steel, see below for finish
options
Tin Plated RoHS Compliant
Finish — Tin .000400–.000550
[0.01020–0.01400] thick over copper
.000050 [0.00127] min. thick
Zinc Plated RoHS Compliant
— Zinc .000200–.000400
[0.00508–0.01016] thick, yellow trivalent
chromate
Insert and Post Spacer — Approved
material per MIL-DTL-24308
Contacts —
Socket Body — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
aMating Area — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
bMating Area — Copper alloy with
.000030 [0.00076] min. gold plate over
.000050 [0.00127] min. nickel underplate
Related Product Data
B
A
± .005
[± 0.13]
C
± .005
[± 0.13]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
± .005
[± 0.13]
D
± .015
[± 0.38]
9, 15, 25 and 37 Positions
Mating Face
G
.248
Max.
[6.30]
F
± .015
[± 0.38]
.283 ± .010
[7.19 ± 0.25]
± .010
[± 0.25]
.030 ± .010
[0.76 ± 0.25]
.050 ± .020
[1.27 ± 0.51]
.395 ± .010
[10.03 ± 0.25]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
H
Post Extension
(See chart for
standard lengths)
± .015
[± 0.38]
50 Positions
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
Product Specification — 108-1770
.248
Max.
[6.30]
Mating Face
F
.283 ± .010
[7.19 ± 0.25]
G
± .015
[± 0.38]
.395 ± .010
[10.03 ± 0.25]
± .010
[± 0.25]
.507 ± .010
[12.88 ± 0.25]
.050 ± .020
[1.27 ± 0.51]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
H
Post Extension
(See chart for
standard lengths)
± .015
[± 0.38]
Receptacle Assemblies
No. of
Contact Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Dimensions
A
(Outside)
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
B
(Outside)
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
C
D
F
G
H
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.429
10.97
.429
10.97
.429
10.97
.429
10.97
.429
10.97
.276
7.01
.278
7.06
.274
6.96
.272
6.91
.333
8.46
8-54
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB
Receptacles, Series 109,
Standard Density Connectors Receptacle Assemblies — .030 [0.76] Post Dia.
(Industrial Grade) (Continued)
Post
No.
Shell
Size
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
Material and Finish
Shell — Steel
Insert and Post Spacer — Approved
material per MIL-DTL-24308
Contacts —
Socket Body — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
aMating Area — Copper alloy with
.000050 [0.00127] min. gold plate over
.000050 [0.00127] min. nickel underplate
bMating Area — Copper alloy with
.000030 [0.00076] min. gold plate over
.000050 [0.00127] min. nickel underplate
Related Product Data
Cavity Identification — page 8-39
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-91 or
TE Connectivity customer drawing.
Product Specification — 108-1770
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
Tin Plated
Shellsb
Part Number
Tin Plated
Shellsa
Zinc Plated
Shellsa
1218842-1
1218844-1
1218843-1
1218842-2
1218844-2
1218843-2
1218842-3
1218844-3
1218843-3
1218842-4
1218844-4
1218843-4
1218842-5
1218844-5
1218843-5
1218845-1
1218847-1
1218846-1
1218845-2
1218847-2
1218846-2
1218845-3
1218847-3
1218846-3
1218845-4
1218847-4
1218846-4
1218845-5
1218847-5
1218846-5
1218854-1
1218856-1
1218855-1
1218854-2
1218856-2
1218855-2
1218854-3
1218856-3
1218855-3
1218854-4
1218856-4
1218855-4
1218854-5
1218856-5
1218855-5
Tin Plated
Shellsb
Part Number
Tin Plated
Shellsa
Zinc Plated
Shellsa
1218848-1
1218850-1
1218849-1
1218848-2
1218850-2
1218849-2
1218848-3
1218850-3
1218849-3
1218848-4
1218850-4
1218849-4
1218848-5
1218850-5
1218849-5
—
—
1218852-1
—
—
1218852-2
—
—
1218852-3
—
—
1218852-4
—
—
1218852-5
1218857-1
1218859-1
1218858-1
1218857-2
1218859-2
1218858-2
1218857-3
1218859-3
1218858-3
1218857-4
1218859-4
1218858-4
1218857-5
1218859-5
1218858-5
Receptacle Assemblies — .040 [1.02] Post Dia.
No.
Pos.
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
1
9
2
15
3
25
4
37
5
50
Post
Ext.
± .020 [± 0.51]
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.125
3.18
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.156
3.96
.188
4.78
.188
4.78
.188
4.78
.188
4.78
.188
4.78
8
Rectangular Pin and Socket Connectors
Shell
Size
8-55
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB Plugs,
Series 109, with One Piece
Insert (Industrial Grade)
Contact Finish — Gold with .000010
[0.00025] min. gold plate over .000050
[0.00127] min. nickel underplate
Interfacial Seal — Fluorosilicone
Material and Finish
Shell — Steel, see below
1 Tin Plated Finish — Tin
.000400–.000550 [0.01020–0.01400]
thick over copper .000050 [0.00127]
min. thick
2 Zinc Plated RoHS Compliant
Finish — Zinc .000200–.000400
[0.00508–0.01016] thick, yellow trivalent
chromate
Insert — Thermoplastic
Contact Material — Brass or
Beryllium copper
A
C
B
E
D
Boardlock (Qty. 2)
Mat’l: Brass
Finish: Tin-Lead over
Nickel Plate
Ø .030 ± .003
Typ.
[0.76 ± 0.08]
Insert
Size 1 to 4 Material: LCP,
Type GLCP-30F
Size 5 Material: PPS,
Type GST-40F
Color: Black
.168–.208
[4.27–5.28]
.168–.208
[4.27–5.28]
.330–.350
[8.38–8.89]
G
L
.385–.405
[9.78–10.29]
F
.385–.405
[9.78–10.29]
Clinch Nut (Qty. 2)
#4-40 Female Threads
Mat’l: Carbon Steel
Finish: Zinc Plated,
Yellow Chromate
.273–.293
[6.93–7.44]
Interfacial Seal
(unbonded)
Mat’l: Fluorosilicone
.497–.517
[12.62–13.13]
.273–.293
[6.93–7.44]
Locking Post (Qty. 2)
#4-40 UNC-2A Thread
Mat’l: Stainless Steel
Finish: Passivated
.105–.145*
[2.67–3.68]
To Pins
Shell, Front & Rear
Mat’l: Steel Per ASTM A 109
or Equivalent
Finish: Tin Plated
.330–.350
[8.38–8.89]
F
.385–.405
[9.78–10.29]
.486
[12.34]
Connector
Style
1
Plug
3
Plug
5
Plug
Washer, Flat (Qty. 2)
Mat’l: Stainless Steel
Finish: Passivated with
Black Oxide
.273–.293
[6.93–7.44]
Bracket (Qty. 2)
Mat'l: Brass
Finish: Tin Plated over
Copper Plate
MS
Shell
Size
A
B
1.198/1.228
30.43/31.19
2.073/2.103
52.65/53.42
2.620/2.650
66.55/67.31
.661/.671
16.21/16.46
1.529/1.539
38.25/38.51
2.074/2.084
52.30/52.55
F
9 Position (with Locking Post)
Insert
Mat’l: Thermoplastic per
MIL-M-24519
Type GLCP-30F,
Color, Black
G
H
3 and 5 Positions (with Interfacial Seal)
Shell, Front & Rear
Mat’l: Steel Per ASTM A 109
or Equivalent Finish:
Zinc Plated per ASTM-B-633
Yellow Chromate
M
J
C
D
E
Dimensions
F
.979/.989
.324/.334
.479/.509
.412/.432
24.87/25.12 8.23/8.48 12.17/12.93 10.46/10.97
1.847/1.857 .324/.334
.479/.509
.416/.436
46.91/47.17 8.23/8.48 12.17/12.93 10.57/11.07
2.401/2.411 .436/.446
.590/.620
.416/.436
60.99/61.24 11.07/11.33 14.99/15.75 10.57/11.07
#4-40 Hex Nut (Qty. 2)
Mat’l: A282 CRES
Finish Silver Plate
*Signal Contacts are solder dipped with SnPb 63/37 to
meet the requirements of MIL-DTL-24308, method 208.
G
.229/.238
5.82/6.05
.224/.236
5.69/5.99
.224/.236
5.69/5.99
H
J
.749/.769
.412/.432
19.02/19.53 10.46/10.97
1.615/1.635 .412/.432
41.02/41.53 10.46/10.97
2.168/2.188 .524/.544
55.07/55.58 13.31/13.82
L
M
.020/.040
0.51/1.02
.029/.049
0.74/1.24
.029/.049
0.74/1.24
—
.435/.443
11.05/11.25
.490/.498
12.45/12.65
Plug Assemblies — .030 [0.76] Post Dia.
1
2
Shell
Size
No.
Pos.
With
interfacial
Seal
1
3
5
9
25
50
No
Yes
Yes
Part Number
Tin Plated
Zinc Plated
RoHS Shells2
Shells1
1218606-6
—
—
1218538-3
—
1218538-5
See Material and Finish above.
See RoHS compliant Material and Finish above.
8-56
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Right-Angle, PCB
Receptacles, Series 109,
with One Piece Insert
(Industrial Grade)
9 Position
A
C
Material and Finish
B
Shell — Steel, tin plated
1 Tin Plated RoHS Compliant
Finish — Tin .000400–.000550
[0.01020–0.01400] thick over copper
.000050 [0.00127] min. thick
Insert — Thermoplastic
Contact Material — Brass or
Beryllium copper
Contact Finish — Gold with .000010
[0.00025] min. gold over .000050
[0.00127] min. nickel underplate
E
D
J
Boardlock
H
Ø .030 ± .003
Typ.
[0.76 ± 0.08]
Ø .153 ± .010
2 Plcs.
[3.89 ± 0.25]
.238–.248
[6.05–6.30]
.237–.257
[6.02–6.53]
K
.330–.350
[8.38–8.89]
.020–.040
[0.51–1.02]
.419–.439
[10.64–11.15]
.385–.405
[9.78–10.29]
.486
[12.34]
.273–.293
[6.93–7.44]
Bracket
9 Position (with Locking Post)
Insert
Mat’l: Thermoplastic per
MIL-M-24519
Type GLCP-30F,
Color, Black
.020–.040
[0.51–1.02]
.238–.248
[6.05–6.30]
Shell, Front & Rear
Mat’l: Steel Per ASTM A 109
or Equivalent
Finish: Tin Plated
Locking Post (Qty. 2)
#4-40 UNC-2A Thread
Mat’l: Stainless Steel
Finish: Passivated
.105–.145*
[2.67–3.68]
To Pins
.330–.350
[8.38–8.89]
.419–.439
[10.64–11.15]
.385–.405
[9.78–10.29]
.273–.293
[6.93–7.44]
Bracket (Qty. 2)
Mat'l: Brass
Finish: Tin Plated over
Copper Plate
8
Washer, Flat (Qty. 2)
Mat’l: Stainless Steel
Finish: Passivated with
Black Oxide
Rectangular Pin and Socket Connectors
.486
[12.34]
#4-40 Hex Nut (Qty. 2)
Mat’l: A282 CRES
Finish Silver Plate
*Signal Contacts are solder dipped with SnPb 63/37 to
meet the requirements of MIL-DTL-24308, method 208.
MS
Shell
Size
1
1
2
Connector
Style
Receptacle
A
1.198/1.228
30.43/31.19
B
C
.638/.648
16.21/16.46
.979/.989
24.87/25.12
Dimensions
D
.306/.316
7.77/8.03
E
.479/.509
12.17/12.93
H
J
K
.749/.769
19.02/19.53
.412/.432
10.46/10.97
.105/.145
2.67/3.68
.136/.176
3.45/4.47
.749/.769
19.02/19.53
.412/.432
10.46/10.97
—
Part
Number
1218665-11
1218665-61
1218607-61
See Material and Finish above.
See RoHS compliant Material and Finish above.
8-57
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 (Continued)
Connector Savers, Series
109, Standard Density
Connector savers prolong
the life of permanently
installed connectors which
would otherwise be subjected to repeated cycles
of mating and unmating,
in applications such as test
interfaces or on testing
devices.
D
± .015
[± 0.38]
C
B
± .005
[± 0.13]
± .005
[± 0.13]
.120 ± .005 Dia.
[3.05 ± 0.13] (2 Holes)
A
± .005
[± 0.13]
Material and Finish
Standard —
Shell — Steel, cadmium plated
Contact Body — Beryllium copper
with .000050 [0.00127] min. gold
plate over .000050 [0.00127] min.
nickel underplate
Socket Hood — Passivated
stainless steel
Insert — Glass filled polyester
Spacer — Black nylon
Non Magnetic —
Shell — Brass, gold plated
Contact Body — Beryllium copper
with .000050 [0.00127] min. gold
plate over .000100 [0.00254] min.
copper underplate
Socket Hood — Brass with .000050
[0.00127] min. gold over .000100
[0.00254] min. copper underplate
Insert — Glass filled polyester
Spacer — Black nylon
.243 ± .005
[6.17 ± 0.13]
.460
[11.68]
Max.
.370 ± .005
[9.40 ± 0.13]
H
E
G
No. of
Contact
Pos.
(Shell
Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
± .005
[± 0.13]
± .005
[± 0.13]
F
± .015
[± 0.38]
± .005
[± 0.13]
A
(outside)
B
(outside)
C
Dimensions
D
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
No. of
Contact
Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
E
(inside)
F
G
(inside)
H
.666
16.92
.994
25.25
1.534
38.96
2.182
55.42
2.079
52.81
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.329
8.36
.329
8.36
.329
8.36
.329
8.36
.441
11.20
.235
5.97
.235
5.97
.230
5.84
.230
5.84
.230
5.84
Standard
(Cadmium Plated
Steel Shell)
Non-Magnetic
(Gold Plated
Brass Shell)
212559-1
212559-2
212560-1
212560-2
212561-1
212561-2
212562-1
212562-2
212563-1
212563-2
8-58
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 109 Cross
(Continued)
Reference
Material and Finish
Series 109 Connectors
Shell — Steel, tin plated per
ASTM-B-545, .000400–.000550
[0.01016–0.01397] thick.
Insert — Approved material per
MIL-DTL-24308.
Retention Clips — Stainless steel or
copper alloy.
No. of Contact Pos.
(Shell Size)
Related Product Data
Series 109 Connectors —
page 8-43
Attention: Connector Marking
Connector marking may differ from
package marking.
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
Part Number
205162-6
205162-5
205161-5
205164-6
205164-5
205163-5
205166-5
205166-4
205165-4
205168-7
205168-6
205167-5
205170-5
205170-4
205169-4
Description
Plug
Plug
Plug
Plug
Plug
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Dimensions
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Note: Meets 48 hr. salt spray requirements of MIL-DTL-24308.
8
Rectangular Pin and Socket Connectors
8-59
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
Crimp, Power/Coax/Signal
Combination Standard Density,
Series 109 Connectors
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
2
11C1
10
1
2
3C35
0
3
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
3
13C3
10
3
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
4
27C2
25
2
4
21C4
17
4
4
17C5
12
5
5
24C7
17
7
Contact Selection
Shell — Steel or copper alloy
a .000200 [.0000079] min. thick plating.
b .000400 [.0000157] min. thick plating.
Plating — Cadmium, tin, gold or zinc
3C3
11C1
5C5
9C4
13C3
17C2
21C1
8C8
27C2
17C5
21C4
25C3
24C7
36C4
4
25C3
22
3
5
36C4
32
4
Material and Finish
Insert
Arrangement
4
8C8
0
8
3
21C1
20
1
3
17C2
15
2
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
3
9C4
5
4
3
5C5
0
5
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel or
copper alloy
Cad Plated Steel Shell
(.120 Mounting Hole)
Plug
Receptacle
(Pin)
(Socket)
448153-1
445705-4
211111-1
211112-1
212491-1
212059-1
212498-1
212502-1
208810-1
208811-1
212506-1
212510-1
212522-1
212526-1
446405-1
445730-1
212538-1
212542-1
212514-1
212518-1
212530-1
212534-1
208742-1
208551-1
208743-1
208552-1
208744-1
208550-1
RoHS Zinc Plated Steel
Shell (.120 Mntg. Hole)
Plug
Receptacle
(Pin)
(Socket)
5-448153-1
5-445705-4
5-211111-1
5-211112-1
5-212491-1
5-212059-1
5-212498-1
5-212502-1
5-208810-1
5-208811-1
5-212506-1
5-212510-1
5-212522-1
5-212526-1
5-446405-1
5-445730-1
5-212538-1
5-212542-1
5-212514-1
5-212518-1
5-212530-1
5-212534-1
5-208742-1
5-208551-1
5-208743-1
5-208552-1
5-208744-1
5-208550-1
Standard:
Size 8 coax: Table I, page 8-66
Size 8 power: page 8-65
Size 20 signal: pages 8-40 to
8-42, 8-46 and 8-47
Standard
RoHS Tin Plated Steel
Shell (.120 Mntg. Hole)a
Plug6
Receptacle
(Pin)
(Socket)
448153-46
445705-1
211111-46
211112-4
212491-36
212059-3
212498-46
212502-5
208810-26
208811-2
212506-56
212510-4
212522-26
212526-2
446405-46
445730-5
212538-46
212542-4
212514-56
212518-5
212530-46
212534-4
208742-46
208551-4
208743-46
208552-4
208744-56
208550-4
NASA Gold Plated Brass
(.120 Mounting Hole)
Plug
Receptacle
(Pin)
(Socket)
448153-2
445705-2
211111-2
211112-2
212491-6
212059-2
212498-2
212502-2
208810-3
208811-3
212506-2
212510-2
212522-3
212526-3
446405-2
445730-3
212538-2
212542-2
212514-3
212518-3
212530-2
212534-2
208742-2
208551-2
208743-2
208552-2
208744-3
208550-2
NASA Gold Plated Brass
(.154 Mounting Hole)
Plug
Receptacle
(Pin)
(Socket)
448153-3
445705-3
211111-3
211112-3
212491-7
212059-6
212498-3
212502-3
208810-4
208811-4
212506-4
212510-3
212522-4
212526-4
446405-3
445730-4
212538-3
212542-3
212514-4
212518-4
212530-3
212534-3
208742-3
208551-3
208743-6
208552-5
208744-4
208550-3
Notes:
1. NASA connectors listed above are qualified to NASA specification 311-P-405. See pages 8-104 and 8-105 for NASA cross reference.
2. Plug insert arrangements shown. Receptacle arrangement is mirror image.
3. Cable clamp/strain relief hardware cannot be used with these arrangements.
4. See pages 8-93 and 8-94 for PCB layouts.
5. The 3C3 arrangement can be mismated 180°. Contact TE Connectivity or call Technical Support for keyed Part Numbers, 1218654-1 and 1218655-1.
6. Tin plated plugs only include grounding indents.
8-60
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
(Continued)
Crimp, Power/Coax/Signal
Combination Standard Density,
Series 109 Connectors
(Continued)
Material and Finish
Shell — Steel or copper alloy
a .000200 [.0000079] min. thick plating.
b .000400 [.0000157] min. thick plating.
Plating — Cadmium, tin-lead, tin,
gold or zinc
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel or
copper alloy
Contact Selection
Blindmate:
Size 8 coax: Table II, page 8-67
Size 8 power: page 8-65
Size 20 signal: pages 8-40 to
8-42, 8-46 and 8-47
Blindmate
Insert
Arrangement
3C3
11C1
5C5
9C4
13C3
17C2
21C1
8C8
27C2
17C5
21C4
25C3
24C7
36C4
Cad Plated Steel Shell
(.120 Mounting Hole)
Plug
Receptacle
(Pin)
(Socket)
447717-1
447718-1
447721-1
447722-1
446630-1
212049-3
445701-1
212051-2
447723-1
212057-2
447724-1
212053-3
447727-1
212055-2
447719-1
447720-1
447732-1
447733-1
447725-1
447726-1
447728-1
445726-1
447730-1
447731-1
446631-1
445000-2
446710-1
446711-1
RoHS Zinc Plated Steel
Shell (.120 Mntg. Hole)
Plug
Receptacle
(Pin)
(Socket)
5-447717-1
5-447718-1
5-447721-1
5-447722-1
—
5-212049-3
—
—
5-447723-1
5-212057-2
5-447724-1
5-212053-3
—
—
5-447719-1
5-447720-1
—
—
—
—
—
5-445726-1
—
—
—
—
5-446710-1
5-446711-1
Notes:
1. Plug insert arrangements shown. Receptacle arrangement is mirror image.
2. Cable clamp/strain relief hardware cannot be used with these arrangements.
3. See pages 8-93 and 8-94 for PCB layouts.
4. Blindmate plugs feature a chamfered lead-in on the front shell, which is constructed of aluminum alloy. See page
8-48 for shell dimensions. Blindmate receptacles feature float bushings installed in the mounting holes. See pages
8-43 and 8-44 for shell dimensions.
5. The 3C3 arrangement can be mismated 180°. Contact TE Connectivity or call Technical Support for keyed Part
Numbers, 1218654-1 and 1218655-1.
6. All connector plugs with grounding indents except the cadmium plated.
8
Rectangular Pin and Socket Connectors
8-61
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
(Continued)
Boardmount Power/Coax/
Signal/Combination Standard
Density, Series 109 Connectors
2
3C34
0
3
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
Shell Size
Contact Arrangement
No. of Signal Contacts
No. of Coaxial Contacts
2
11C1
10
1
3
13C3
10
3
4
21C4
17
4
Material and Finish
Contact Selection
Shell — Steel or copper alloy
Plating — Cadmium or tin
Standard (If not shown with
connector):
Size 8 coax: Table I, page 8-66
Size 8 power: page 8-65
a
Tin Plated Finish — Tin
.000400–.000550 [0.01020–0.01400]
thick over .000050 [0.00127] copper
min.
b Tin Plated RoHS Compliant
Finish — Tin .000200–.000400
[0.00508–0.01016] thick over .000100–
.000200 [0.00254–0.00508] copper
Insert — Approved material per
MIL-DTL-24308
4
17C5
12
5
4
25C3
22
3
5
36C4
32
4
.050 ± .020
[1.27 ± 0.51]
.243
[6.17]
.429 ± .010
[10.90 ± 0.25]
.030 ± .010
[0.76 ± 0.25]
.131
[3.33]
2 Plcs.
.300 ± .010
[7.62 ± 0.25]
2 Plcs.
.030 ± .003
Typ.
[0.76 ± 0.08]
Typical Vertical Receptacle
.224–.236
[5.69–5.99] .220
[5.59]
Max.
.180 ± .020
[4.57 ± 0.51]
.330–.350
[8.38–8.89]
.029–.049
[0.74–1.24]
.486
[12.34]
Locking Post
.318
Ref.
[8.08]
.646
Ref.
[16.41]
.030–.070
[0.78–1.78]
.416–.436
[10.57–11.07]
Power Contact
3 Plcs.
.112 Ref.
[2.84] Typ.
Typical Right-Angle Plug
Hardware Options
Screwlocks Boardlocks
Contact
Config.
Shell
Plating
Style
3C3
11C1
11C1
13C3
17C5
21C4
25C3
Tin
Cad.
Cad.
Tin
Tin
Tin
Tin
Vertical Recept.
Vertical Plug
Vertical Recept.
Vertical Plug
Right-Angle Plug
Vertical Recept.
Right-Angle Plug
No
No
No
No
Yes
No
No
No
No
No
No
Yes
No
Yes
36C4
Tin
Vertical Recept.
No
Yes
4-40 Standoff
w/
Clinchnuts Boardlocks
No
Yes
No
No
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Locking
Posts
No
No
No
No
No
No
Yes
No
Contacts
Power
Coax
Spacers
Part
Number
1218896-1a
1218128-1a
1218129-1a
1218816-1a
1218939-1a
1218887-1a
1218611-1a
1218807-1a
5-1218807-1b
No
No
No
No
Yes
No
Yes
No
Yes
Yes
No
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
Notes:
1. Plug insert arrangements shown. Receptacle arrangement is mirror image.
2. See TE Connectivity customer drawing for PCB layouts.
3. The 3C3 arrangement can be mismated 180°. Contact your TE Sales Engineer or call Technical Support for keyed Part Numbers.
a See Tin Plated finish above.
b See Tin Plated RoHS compliant finish above.
8-62
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
(Continued)
Size 8 Contacts (Power)
for Standard Density,
Series 109 Power/Coax/
Signal Connectors
Ø.214
[5.44]
Ø.142±.001
[3.61±0.03]
ØA
.360
[9.14]
.400±.002
[10.16±0.05]
Crimp Contacts
Material and Finish
Copper alloy, plated gold over nickel
underplate
Retention Clips — Stainless steel or
phosphor bronze
.090 Ref.
[2.29]
.203 Min.
[5.16]
.210 [5.33] .203 Min.
.203 [5.16] [5.16]
ØA
.125±.010
[3.18±0.25]
.360
[9.14]
.080 Min.
[2.03]
.400±.002
[10.16±0.05]
.865 Ref.
[21.97]
Pin
Wire Size Range
AWG
mm2
Note: clip may differ from view shown
Product Specification
For Crimp Contacts — 108-10045
(current rating and wire size)
For PCB Contacts — 108-10045-1
82
8
102
5
12-14
2-3
16-18
0.8-1.4
Dim.
A
.230
5.84
.185
4.69
.150
3.81
.102
2.59
.125±.010
[3.18±0.25]
Socket
50 Gold
Pins3
30 Gold
Pins3
Part Numbers
50 Gold
30 Gold
Sockets
Sockets
211159-1
211159-3
211161-1
211161-3
1218385-1
—
211159-2
211159-4
211161-2
211161-4
—
—
212007-1
212007-2
212008-1
212008-2
1218483-1
1218483-2
—
—
212013-11 212013-21 212014-11 212014-21
Blindmate 30 Blindmate
50 Gold Pins
Gold Pins
Notes: 1. 16-18 size use 608668-1 with Positioner 608668-2.
2. Retention clip shown is for 12-14, 16-18 Awg. See TE Connectivity customer drawing for 8, 10 AWG
Retention Clip.
3. Use these contacts only with the Standard connectors on pages 8-62 and 8-63. Do not use with
Blindmate connectors.
Hand Crimp Tool — AMP 608651-1
with positioner AMP 608651-2
Extraction Tool — 318813-1
Printed Circuit Board Contacts
(Use these contacts only with
the Standard connectors
on pages 8-62 and 8-63.
Do not use with Blindmate
connectors.)
Right-Angle
1.001 Ref.
[25.43]
.991 Ref.
[25.17]
.214 ± .002
[5.44 ± 0.05]
.214
[5.44
± .002
± 0.05]
8
Socket
445548-11
445548-22
Vertical
.214
[5.44]
Rectangular Pin and Socket Connectors
Pin
213062-11
213062-22
.921 Ref.
[23.39]
.585
[14.86]
A Ref.
B
.214 ± .002
[5.44 ± 0.05]
Socket
445798-11
445798-22
Pin
See Table
Part Number
449379-11
449379-21
1-449379-02
1-449379-12
Dim A
.931
[23.65]
.845
[21.46]
.931
[23.65]
.845
[21.46]
Dim B
.461
[11.71]
.375
[9.52]
.461
[11.71]
.375
[9.52]
Note: 1. Standard connector, .000050 [0.00127] gold plating.
2. Standard connector, .000030 [0.00076] gold plating.
8-63
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
(Continued)
RF Contacts for Standard
Density, Series 109 Power/
Coax/Signal Connectors
Performance Characteristics
Frequency Range — 0 to 500 MHz
Operating Voltage, Max. —
275 vac rms @ sea level
Termination Resistance, Max. —
Center Contact — 6.0 milliohms
Outer Contact — 3.0 milliohms
Insulation Resistance, Min. —
5,000 megohms @ 500 vdc
Dielectric Withstanding Voltage —
Sea Level — 800 Volts rms
30,000 ft [9,144 m] — 525 volts rms
70,000 ft [21,336m] — 275 volts rms
VSWR to 500MHz, Max.
Pin/Socket
Straight/Straight
Right-Angle/Straight
Right-Angle/Right-Angle
VSWR
1.30
1.35
1.40
RF Crosstalk — 90dB @ 5-500 MHz
Mating Force, Max. — 4.0 lb
[17.8 N]
Unmating Force, Min. — 2.0 oz
[0.556 N]
Contact Retention — 20 lb [89 N]
Contact Durability — 500 cycles
Cable
RG/U
316, 188, 174,
179, 179A, 179B
188-type
Double-Braid
142, 142A, 142B
Moisture Resistance — 240 hours
per MIL-STD-1344, Method 1002,
Cond. II
Salt Fog — 48 hours per MIL-STD1344, Method 1001, Cond. B
155.8
50
222.5
Brass — per QQ-B-626 and MIL-C-50
Phosphor Bronze — per QQ-B-750
Beryllium Copper — per QQ-C-530
PTFE—per MIL-P-19468
Nylon—per MIL-M-20693
Extraction Tool Numbers
Subminiature D Housings —
58095-1 AMPLIMITE Connector
AMP-HDI Connector Housings —
58095-2
Force
lb
[N]
20
89
35
Material and Finish
Finish
a Bright Tin-Lead Plating — per
ASTM-B-571
b Bright Tin Plating — per
ASTM-B-545
Copper Plating — per MIL-C-14550
Gold Plating — per MIL-G-45204
Nickel Plating — per QQ-N-290
Operating Temperature —
131°F to 257°F [55°C to +125°C]
Thermal Shock — 131°F to 257°F
[55°C to +125°C] per MIL-STD-1344,
Method 1003, Cond. A
Physical Shock — 50 G’s per MILSTD-1344, Method 2004, Cond. A
Vibration — MIL-STD-1344, Method
2005, Cond. II
Extraction Tool — 318813-1
Hand Crimp Tool — 69710-1
Pneu. Crimp Tool — 69365-8
Dies for Crimp Tools — See table
Instruction Sheet —
408-6755 Size 8 Coaxial RF 50-Ohm
and Non-Impedance
Matched Pin and Socket
Contact Kits
A
Max.
A
Max.
B
Dia. Max.
B
Dia. Max.
Alignment Ring
for use in
Subminiature D
housing only
Pin
Table I - Standard
RG/U
Cable
178, 178A, 178B
196, 196A
174, 316
188, 188A
179, 179A, 179B
187, 187A, 161
Belden 9221
188-Type
Double Braid
142, 142A, 142B
400, Belden 9246
Dimensions
A
B
.950
24.13
.956
24.28
.956
24.28
.956
24.28
1.080
27.43
.235
5.94
.234
5.94
.234
5.94
.234
5.94
.255
6.48
Socket
Contact Part Numbers
Non-Impedance
50 Ohm
Matched
Pin
Socket
Pin
Socket
228618-5a
—
—
—
5-228618-5b
a
a
228618-1
228596-1
221980-1 1883630-1
5-228618-1b 5-228596-1b
228618-2a
5-228618-2b
228596-2a
5-228596-2b
221980-3
—
228618-4a
5-228618-4b
228596-4a
5-228596-4b
—
—
228618-3
228596-3
—
Notes:
1. Non Impedance Matched contacts and 50 ohm contacts are not intermateable.
2. Use these contacts only with the Standard connectors on pages 8-62 and 8-64.
a See Material and Finish above.
b See Material and Finish for RoHS compliant Part Numbers above.
8-64
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
—
Die Insert
for Tools
59993-1
59993-1
59993-1
59993-1
58212-1
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 (Continued)
(Continued)
RF Contacts for Standard
Density, Series 109 Power/
Coax/Signal Connectors
(Continued)
Material and Finish
Center Contacts — Beryllium Copper
or Brass per QQ-B-626, per QQ-C-530,
gold plated
Outer Contacts — Beryllium copper
per QQ-C-530, gold plated
Plugs — Beryllium copper per
QQ-C-530, gold plated
Jack — Stainless steel per
ASTM-A-582, gold plated
Shells — Stainless steel per
ASTM-A-582, passivated
Panel Shells — Brass per QQ-B-626,
nickel plated
Dielectrics — PTFE per
ASTM-D-1457
Grip Rings — Brass per MIL-C-50 or
Beryllium Copper per QQ-C-530, nickel
plated
Springs — Steel wire per QQ-W-470
Bushings — Stainless steel per
ASTM-A-582, passivated
Retention Springs — Beryllium
Copper per QQ-C-530, Tin-Lead Plated
.225 Dia.
[5.72] Max.
.545
Max.
[13.85]
.545
Max.
[13.85]
.225 Dia.
[5.72] Max.
Socket
Pin
Table II - 2.8 mm Blindmate
RG/U
Cable
405 Semi-Rigid
.086 [2.18]
Contact
Type
Pin (Plug)
Socket (Jack)
Part
Number
413242-1
413249-1
Crimp
Tool
59980-1
59980-1
Die Set
312253-2
312253-2
Note:
1. Use these contacts only with the Blindmate connectors on page 8-63.
Locator
852113-1
852114-1
Insertion
Tool
852115-1
—
Extraction
Tool
2-305183-0
318813-1
Finishes
Passivate per QQ-P-35
Gold per MIL-G-45204
Nickel per QQ-N-290
Tin-Lead per ASTM-B-545
Performance Characteristics
Mechanical Characteristics
Cable Retention —
RG-402/U Cable (3.58 [.141] O.D.)–
60 lb [266.9 N], min.
RG-405/U Cable (2.18 [.086] O.D.)–
30 lb [133.4 N], min.
Connector Mating Force —
2.8 mm: 3 lbs Max.
8
Rectangular Pin and Socket Connectors
Electrical Characteristics
Nominal Impedance — 50 ohms
Frequency Range —
2.8 mm: 0 to 26.5 GHz
2.8 mm for size 8 cavities: 0 to 40 GHz
Operating Voltage —
RG-402/U Cable (3.58 [.141] O.D.)
500 volts rms at 60 Hz (sea level)
125 volts rms at 60 Hz
(21 336 m [70,000 ft])
RG-405/U Cable (2.18 [.086] O.D.)
335 volts rms at 60 Hz (sea level)
85 volts rms at 60 Hz
70,000 ft [21,336 m]
Environmental Characteristics
Temperature Range —
–85°F to +221°F [–65°C to +105°C]
Technical Documents
Instruction Sheet —
408-9582 Insertion tool 852115-1
for blindmate 2.8mm plug
contact 413242-1
408-9585 Blindmate 2.8mm contacts
for semi-rigid .086 in.
coaxial cable
8-65
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Coax
SeriesMix
90 Cross
(Continued)
Reference
Material and Finish
Coax Mix Connectors
Shell — Steel, tin plated per
ASTM-B-545, .000400–.000550
[0.01016–0.01397] thick.
Insert — Approved material per
MIL-DTL-24308.
Retention Clips — Stainless steel or
copper alloy.
Insert Arrangement
(Shell Size)
Related Product Data
11C1
(2)
21C1
(3)
Coax Mix Connectors — page 8-62
5C5
(3)
Attention: Connector Marking
21C4
(4)
Connector marking may differ from
package marking.
24C7
(5)
Note: Meets 48 hr. salt spray requirements of MIL-DTL-24308.
Part Number
—
211111-6
211112-6
212522-7
212522-6
212526-6
1-212491-0
212491-9
1-212059-0
212530-6
212530-5
212534-5
208743-5
208743-7
208552-6
Description
Plug
Plug
Plug
Plug
Plug
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Dimensions
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
Indents
Refer to page 8-43
8-66
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Series 90 Connectors
Insert Arrangements
15 Position, Shell Size 1
MS 18273-2
26 Position, Shell Size 2
MS 18274-2
78 Position, Shell Size 5
MS 18277-2
44 Position, Shell Size 3
MS 18275-2
104 Position, Shell Size 6
MS 14004-1
62 Position, Shell Size 4
MS 18276-2
Performance Specifications
Note: Mating face of plug shown: receptacle is mirror image.
All Series 90 AMPLIMITE military connectors conform to the latest amendments of military
specification MIL-DTL-24308. For more detailed information, refer to MIL-DTL-24308.
All Series 90 connectors are designed for a –67°F to 257°F [–55°C to +125°C]
temperature range.
Technical Documents List
8
The following is a list of technical documents that cover the application and performance of
AMPLIMITE Series 90 military connectors, contacts, tooling and accessories.
Rectangular Pin and Socket Connectors
Military Specifications
MIL-DTL-24308
Connectors, Electric, Rectangular, Miniature Polarized Shell, Rack and
Panel, General Specifications for
MIL-C-39029
Contacts, Electrical Connector, General Specification for
NASA Specification
GSFC-S-311-P-4
Instruction Sheets
408-7516
408-7610
408-7508
408-7837
Non-Magnetic Connectors, General Specification for
Application Tooling for MIL-C-39029 Contacts
Application and Maintenance for Hand Crimping Tool 90294-1
Insertion/Extraction Tools 91067-1, 91067-2 and 91067-3
Female Screwlock Kit 205817-8 and Male Screw/Retainer
Kit 211883-5
8-67
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Size 22 Crimp Contacts
for Series 90 Connectors
(AS39029)
Snap-In Contacts
.030 [0.76] Pin Diameter
Material and Finish
a
Contact Body — Copper alloy plated
gold .000005 [0.000127] min. thick. over
nickel underplate
a Mating Area — Gold .00005
[0.00127] min. thick. over nickel underplate
b Contact Body and Mating Area —
Gold min. .00005 [0.00127] min. thick.
over nickel underplate
Socket Hood — Passivated stainless
steel
Wire Size
Range
AWG
[mm2]
Pin
M39029/58-360
(Supersedes M24308/13-1)
Ins. Dia.
(Max.)
Contact
Configuration
Tape Mounted
Contacts1
AMP
Part No.
Pin
Socket
Pin
Socket
204370-5
a
204351-2
b
1-204370-2
b
204351-6
22-28
0.4-0.8
.054
1.38
22-28
0.4-0.8
.054
1.38
a
Socket
M39029/57-354
(Supersedes M24308/12-1)
Loose Piece
Contacts
Military
AMP
Part No.
Part No.
(AS39029/)
58-360
57-354
58-360
57-354
Hand Tool
Tool No. Positioner No.
(M22520/)
(M22520/)
a
204370-2
a
204351-1
b
1-204370-3
b
204351-5
02-01
02-01
02-01
02-01
02-09
02-06
02-09
02-06
Contact
Color Bands
orange, blue, black
orange, green, yellow
orange, blue, black
orange, green, yellow
1Tape
mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 8-89).
Notes: 1. These contacts are used in Series 90 military connectors.
2. Insertion/Extraction Tool Part Number 91067-1 (Military Part Number M81969/1-04) is used to install and remove pin and socket contacts.
3. See Instruction Sheet 408-7516 for wire length, tool and selector settings.
4. Color bands are read in the direction of terminal (wire barrel) end to mating end.
Size 22 Crimp Contacts for
Series 90 Connectors
(Industrial Grade)
Snap-In Contacts
.030 [0.76] Pin Diameter
Material and Finish
Pin Body — Copper alloy with
.000050–.000100 [0.00127–0.00254]
gold plate over .000050–.000150
[0.00127–0.00381] nickel underplate
Pin
Wire Size
Range
AWG
[mm2]
22-28
0.4-0.8
Ins. Dia.
(Max.)
.054
1.38
Tape Mounted
Contact
Contacts1
Configuration Part Number
Pin
Socket
1218699-2
—
Loose Piece
Contacts
Part Number
1218699-1
—
Hand Tool
Tool No.
Positioner No.
(M22520/)
(M22520/)
02-01
02-09
—
—
1Tape
mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 8-89).
Notes: 1. These contacts are used in Series 90 connectors.
2. Insertion/Extraction Tool Part Number 91067-1 (Military Part Number M81969/1-04) is used to install and
remove pin and socket contacts.
3. See Instruction Sheet 408-7516 for wire length, tool and selector settings.
8-68
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Size 22 Posted Contacts for
Series 90 Connectors
Material and Finish
Pin and Socket Body — Leaded
nickel copper or beryllium copper
Socket Hood — See chart below
Pin
(See Drawing Number 207683
for Latest Configurations)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-1 or
MIL Part Number M81969/1-04
Insertion tip, for replacement
Part Number 126237-1
Extraction tip, for replacement
Part Number 126195-2
Socket
(See Drawing Number 207684
for Latest Configurations)
Notes:
1. Contacts on this page can be
used with connectors on pages
8-72 to 8-78, 8-85. See page 8-92
for PCB layouts.
2. Mating End of pin and socket
complies with MIL-C-39029.
Post
Diameter
± .002 [± .050]
.018
0.46
.018
0.46
.275
6.99
.275
6.99
.525
13.34
.175
4.45
Part Numbers
Pin
Socket
207683-6
207684-3
207683-2
207684-1
207683-4
207684-2
207683-8
207684-4
—
207684-5
207683-9
—
1-207683-1
—
Contact
Plating
Socket Hood
Material and Finish
Pin
Socket
.000050–.000100
.000050–.000100
Brass or Beryllium copper with
[0.00127–0.00254]
[0.00127–0.00254]
.000050–.000100 [0.00127–0.00254]
thick gold plate over
thick gold plate over
thick gold plate over
.000100–.000150
.000100–.000250
.000100–.000250 [0.00254–0.00635]
[0.00254–0.00381]
[0.00254–0.00635]
thick copper underplate
thick copper underplate thick copper underplate
.000050–.000100 [0.00127–0.00254]
thick gold plate over
Passivated Stainless Steel
.000050–.000150 [0.00127–0.00381]
thick nickel underplate
.000050–.000100 [0.00127–0.00254]
thick gold plate over
.000050–.000150 [0.00127–0.00381]
thick nickel underplate
Passivated Stainless Steel
.000050–.000100 [0.00127–0.00254]
thick gold plate over
.000200–.000250 [0.00508–0.00635]
thick nickel underplate
—
8
Rectangular Pin and Socket Connectors
.025
0.64
Post
Extension
C ± .025 [± 0.63]
.175
4.45
.275
6.99
.525
13.34
.375 Max.
[9.53]
Ref.
C
Post Extension When Used in a Standard Connector
8-69
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Crimp Plugs, Series 90,
High Density Connectors
(MIL Qualified)
Material and Finish
Shell — Steel, cadmium plated, yellow
chromate
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel
or copper alloy
L
A
B
± .005
[± 0.13]
± .005
[± 0.13]
(Inside)
± .010
[± 0.25]
.120 ± .005 Dia.
[3.05 ± 0.13] 2 Holes
(Inside)
H
± .015
[± 0.38]
J
± .010
[± 0.25]
(Industrial Grade)
C
Material and Finish
Shell — Steel, zinc plated, yellow
trivalent chromate or tin plated with
grounding indents (not shown)
Insert — Polyphenylene Sulfide (PPS)
Retention Clips — Stainless steel or
copper alloy
± .005
[± 0.13]
D
± .015
[± 0.38]
Mating Face
K
F
± .006
[± 0.15]
± .010
[± 0.25]
.086–.091
[2.18–2.31] Dia.
.031 ± .005
[0.79 ± 0.13]
.130
Max.
[3.30]
.070
Max.
[1.78]
Related Product Data
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting, Mating Dimensions —
page 8-90
Accessories — pages 8-95 to 8-97
G
.375
[9.53]
Max.
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Attention: MIL Qualified
Connector Marking
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
MIL Qualified
No. of
Contact
Pos.
(Shell
Size)
A
B
C
Dimensions
D
F
G
H
J
K
L
Standard Mount
Military
AMP
Part No.2 Part
No.
M24308/
Floating
Bushing Mount
Military
AMP
Part No.
Part No.
M24308/
Description
.666 .329 .984 1.213 .235 .759 .494 .422 .030 .422
16.92 8.36 24.99 30.81 5.97 19.28 12.55 10.72 0.76 10.72
4-264F
204501-1
4-329F
204525-1
Plug only
4-11F
204513-2
4-307F
204537-2
Plug with pins1
.994 .329 1.312 1.541 .235 1.083 .494 .422 .030 .422
25.25 8.36 33.32 39.14 5.97 27.51 12.55 10.72 0.76 10.72
4-265F
204503-1
4-330F
204527-1
Plug only
4-12F
204515-2
4-308F
204539-2
Plug with pins1
44
(3)
1.534 .329 1.852 2.088 .230 1.625 .494 .422 .039 .426
38.96 8.36 47.04 53.04 5.84 4.13 12.55 10.72 0.99 10.82
4-266F
204505-1
4-331F
204529-1
Plug only
4-13F
204517-2
4-309F
204541-2
Plug with pins1
62
(4)
2.182 .329 2.500 2.729 .230 2.272 .494 .422 .039 .426
55.42 8.36 63.5 69.32 5.84 57.7 12.55 10.72 0.99 10.82
4-267F
204507-1
4-332F
204531-1
Plug only
4-14F
204519-2
4-310F
204543-2
Plug with pins1
78
(5)
2.079 .441 2.406 2.635 .230 2.178 .605 .534 .039 .426
52.81 11.2 61.11 66.93 5.84 55.32 15.37 13.56 0.99 10.82
4-268F
204509-1
4-333F
204533-1
Plug only
104
(6)
2.212 .503 2.500 2.729 .230 2.302 .668 .596 .039 .426
56.18 12.78 63.5 69.32 5.84 58.47 16.97 15.14 0.99 10.82
4-15F
4-269F
4-16F
204521-2
204511-1
204523-2
4-311F
4-334F
4-312F
204545-2
204535-1
204547-2
Plug with pins1
Plug only
Plug with pins1
15
(1)
26
(2)
Industrial
Grade3
Standard
Mount
RoHS
Part No.
1218746-14
204501-55
—
1218746-24
204503-45
—
1218746-34
204505-55
—
1218746-44
204507-55
—
1218746-54
204509-75
—
1218746-64
—
Notes: See pages 8-99 through 8-103 (military to AMP Part Number cross reference) for additional part numbers.
1 Size 22 contacts supplied with connectors are loose piece.
2 “F” is stamped on connectors following M24308 part number as required. “F” designates cadmium shell plating.
3 Meets requirements of MIL-DTL-24308.
4 Zinc plated.
5 Tin plated.
8-70
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Crimp Plugs, Series 90,
High Density Connectors —
Zinc Plated, RoHS
Compliant
L
(MIL Qualified)
A
Material and Finish
B
Shell — Steel, zinc plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel
or copper alloy
± .005
[± 0.13]
± .005
[± 0.13]
(Inside)
.120 ± .005 Dia.
[3.05 ± 0.13] 2 Holes
(Inside)
H
C
D
K
J
± .010
[± 0.25]
± .015
[± 0.38]
Mating Face
Shell — Steel, zinc plated
Insert — Polyphenylene Sulfide (PPS)
Retention Clips — Stainless steel or
copper alloy
± .015
[± 0.38]
± .005
[± 0.13]
(Industrial Grade)
Material and Finish
± .010
[± 0.25]
F
± .006
[± 0.15]
± .010
[± 0.25]
.031 ± .005
[0.79 ± 0.13]
.086–.091
[2.18–2.31] Dia.
.130
Max.
[3.30]
.070
Max.
[1.78]
.375
[9.53]
Max.
Related Product Data
G
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting, Mating Dimensions —
page 8-90
Accessories — pages 8-95 to 8-97
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Attention: MIL Qualified
Connector Marking
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
8
Rectangular Pin and Socket Connectors
MIL Qualified
No. of
Contact
Pos.
(Shell
Size)
Dimensions
D
F
G
A
B
C
H
J
K
L
15
(1)
.666
16.92
.329
8.36
.984
24.99
1.213
30.81
.235
5.97
.759
19.28
.494
12.55
.422
10.72
.030
0.76
.422
10.72
26
(2)
.994
25.25
.329
8.36
1.312
33.32
1.541
39.14
.235
5.97
1.083
27.51
.494
12.55
.422
10.72
.030
0.76
.422
10.72
44
(3)
1.534
38.96
.329
8.36
1.852
47.04
2.088
53.04
.230
5.84
1.625
4.13
.494
12.55
.422
10.72
.039
0.99
.426
10.82
62
(4)
2.182
55.42
.329
8.36
2.500
63.5
2.729
69.32
.230
5.84
2.272
57.7
.494
12.55
.422
10.72
.039
0.99
.426
10.82
78
(5)
2.079
52.81
.441
11.2
2.406
61.11
2.635
66.93
.230
5.84
2.178
55.32
.605
15.37
.534
13.56
.039
0.99
.426
10.82
104
(6)
2.212
56.18
.503
12.78
2.500
63.5
2.729
69.32
.230
5.84
2.302
58.47
.668
16.97
.596
15.14
.039
0.99
.426
10.82
Standard Mount
Military
AMP
Part No.
Part No.
M24308/
4-264
4-11
4-265
4-12
4-266
4-13
4-267
4-14
4-268
4-15
4-269
4-16
1757823-1
1757823-7
1757823-2
1757823-8
1757823-3
1757823-9
1757823-4
1-1757823-0
1757823-5
1-1757823-1
1757823-6
1-1757823-2
Floating
Bushing Mount
Military
AMP
Part No.
Part No.
M24308/
4-329
1757825-1
4-307
1757825-7
4-330
1757825-2
4-308
1757825-8
4-331
1757825-3
4-309
1757825-9
4-332
1757825-4
4-310
1-1757825-0
4-333
1757825-5
4-311
1-1757825-1
4-334
1757825-6
4-312
1-1757825-2
Notes: See pages 8-99 through 8-103 (military to AMP Part Number cross reference) for additional part numbers.
8-71
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Crimp Receptacles,
Series 90, High Density
Connectors
(MIL Qualified)
A
Shell — Steel, cadmium plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel or
copper alloy
(Outside)
Dia.
.120±.005
[3.05±0.13] 2 Holes
F
B
(Industrial Grade)
± .005
[± 0.13]
C
(Outside)
Material and Finish
Mating Face
Shell — Steel, zinc plated, yellow
trivalent chromate or tin plated
Insert — Polyphenylene Sulfide (PPS)
Retention Clips — Stainless steel or
copper alloy
.429 ± .010
[10.9 ± 0.25]
± .005
[± 0.13]
Material and Finish
H
± .005
[± 0.13]
± .015
D
[± 0.38]
± .015
[± 0.38]
G
± .010
[± 0.25]
.243 ± .005
[6.17 ± 0.13]
± .010
[± 0.25]
.086–.091
Dia.
[2.18–2.31]
.031 ± .005
[0.79 ± 0.13]
.130
Max.
[3.30]
.070
Max.
[1.78]
Related Product Data
E
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting, Mating Dimensions —
page 8-90
Accessories — pages 8-95 to 8-97
.375
[9.53]
Max.
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Attention: Connector Marking
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
Clinch Nut Mount
MIL Qualified
No. of
Contact
Pos.
(Shell
Size)
15
(1)
A
B
.643
16.33
.311
7.9
C
Dimensions
D
E
F
G
.984 1.213 .759 .494 .422
24.99 30.81 19.28 12.55 10.72
H
Standard Mount
Military
AMP
Part No.2
M24308/ Part No.
.030
0.76
2-286F
204500-1
2-11F
2-12F
Floating
Bushing Mount
Military
AMP
Part No.
M24308/ Part No.
Description
2-297F
204524-1
Recept. only
204512-2
2-28F
204536-2
Recept. with sockets1
204502-1
2-298F
204526-1
Recept. only
204514-2
2-29F
204538-2
Recept. with sockets1
26
(2)
.971
24.66
.311
7.9
1.312 1.541 1.083 .494 .422
33.32 39.14 27.51 12.55 10.72
.030
0.76
2-287F
44
(3)
1.511
38.38
.311
7.9
1.852 2.088 1.625 .494 .422
47.04 53.04 41.3 12.55 10.72
.039
0.99
2-288F
204504-1
2-299F
204528-1
Recept. only
62
(4)
2.159
54.84
.311
8.36
2.500 2.729 2.272 494 .422
63.5 69.32 57.7 12.55 10.72
.039
0.99
78
(5)
2.064 .423 2.406 2.635 2.178 .605 .534
52.43 10.74 61.11 66.93 55.32 15.37 13.56
.039
0.99
104
(6)
2.189 .485 2.500 2.729 2.302 .668 .596
55.6 12.32 63.5 69.32 58.47 16.97 15.14
.039
0.99
2-13F
2-289F
2-14F
2-290F
2-15F
2-291F
2-16F
204516-2
204506-1
204518-2
204508-1
204520-2
204510-1
204522-2
2-30F
2-300F
2-31F
2-301F
2-32F
2-302F
2-33F
204540-2
204530-1
204542-2
204532-1
204544-2
204534-1
204546-2
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Industrial
Grade3
RoHS
Part No.
1218747-14
204500-45
—
1218747-24
204502-45
—
1218747-34
204504-55
—
1218747-44
—
1218747-54
—
1218747-64
—
Notes: See pages 8-99 through 8-103 (military to AMP Part Number cross reference) for additional part numbers.
1 Size 22 contacts supplied with connectors are loose piece.
2 “F” is stamped on connectors following M24308 part number as required. “F” designates cadmium shell plating.
3 Meets requirements of MIL-DTL-24308.
4 Clinch Nut Mount, Zinc plated.
5 Standard Mount, Tin plated.
8-72
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Crimp Receptacles,
Series 90, High Density
Connectors — Zinc Plated,
RoHS Compliant
(MIL Qualified)
A
Material and Finish
(Outside)
.429 ± .010
[10.9 ± 0.25]
± .005
[± 0.13]
Dia.
.120±.005
[3.05±0.13] 2 Holes
Shell — Steel, zinc plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Stainless steel or
copper alloy
F
B
± .005
[± 0.13]
C
(Outside)
(Industrial Grade)
Mating Face
Material and Finish
Shell — Steel, zinc plated
Insert — Polyphenylene Sulfide (PPS)
Retention Clips — Stainless steel or
copper alloy
H
± .005
[± 0.13]
± .015
D
[± 0.38]
± .015
[± 0.38]
G
± .010
[± 0.25]
.243 ± .005
[6.17 ± 0.13]
± .010
[± 0.25]
.086–.091
Dia.
[2.18–2.31]
.031 ± .005
[0.79 ± 0.13]
.130
Max.
[3.30]
.070
Max.
[1.78]
Related Product Data
E
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting, Mating Dimensions —
page 8-90
Accessories — pages 8-95 to 8-97
.375
[9.53]
Max.
± .010
[± 0.25]
.031 ± .005 [0.79 ± 0.13] .008 ± .004 Overall
Float For Misalignment [0.2 ± 0.10] Free Float
Floating Bushing
Dual Mount
Attention: Connector Marking
Connector marking may differ from
package marking. All connectors marked
per MIL-DTL-24308.
Clinch Nut Mount
8
Rectangular Pin and Socket Connectors
MIL Qualified
No. of
Contact
Pos.
A
(Shell
Size)
B
C
D
Dimensions
E
F
G
H
15
(1)
.643
16.33
.311
7.9
.984
24.99
1.213
30.81
.759
19.28
.494
12.55
.422
10.72
.030
0.76
26
(2)
.971
24.66
.311
7.9
1.312
33.32
1.541
39.14
1.083
27.51
.494
12.55
.422
10.72
.030
0.76
44
(3)
1.511
38.38
.311
7.9
1.852
47.04
2.088
53.04
1.625
41.3
.494
12.55
.422
10.72
.039
0.99
62
(4)
2.159
54.84
.311
8.36
2.500
63.5
2.729
69.32
2.272
57.7
494
12.55
.422
10.72
.039
0.99
78
(5)
2.064 .423 2.406
52.43 10.74 61.11
2.635
66.93
2.178
55.32
.605
15.37
.534
13.56
.039
0.99
104
(6)
2.189 .485 2.500
55.6 12.32 63.5
2.729
69.32
2.302
58.47
.668
16.97
.596
15.14
.039
0.99
Standard Mount
Military
AMP
Part No.
Part No.
M24308/
2-286
2-11
2-287
2-12
2-288
2-13
2-289
2-14
2-290
2-15
2-291
2-16
1757824-1
1757824-7
1757824-2
1757824-8
1757824-3
1757824-9
1757824-4
1-1757824-0
1757824-5
1-1757824-1
1757824-6
1-1757824-2
Floating
Bushing Mount
Military
AMP
Part No.
Part No.
M24308/
2-297
1757826-1
2-28
1757826-7
2-298
1757826-2
2-29
1757826-8
2-299
1757826-3
2-30
1757826-9
2-300
1757826-4
2-31
1-1757826-0
2-301
1757826-5
2-32
1-1757826-1
2-302
1757826-6
2-33
1-1757826-2
Description
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Recept. only
Recept. with sockets1
Notes: See pages 8-99 through 8-103 (military to AMP Part Number cross reference) for additional part numbers.
8-73
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Non-Magnetic Crimp Plugs,
Series 90, High Density
Connectors (NASA Qualified)
± .005
[± 0.13]
A
(Inside)
K
± .005
[± 0.13]
Dia.
2 Holes
Connector Material and Finish
Shell — Brass, gold plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Copper alloy
B
± .005
[± 0.13]
C
(Inside)
± .005
[± 0.13]
D
± .015
[± 0.38]
Related Product Data
Cavity Identification — page 8-69
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
Mating Face
± .006
[± 0.15]
F
H
± .015
[± 0.38]
.375
[9.53]
Max.
.070
Max.
[1.78]
L
G
± .010
[± 0.25]
.125
[3.18] Ref.
Grommet style only
J
± .010
[± 0.25]
± .010
[± 0.25]
Non-Magnetic Plugs per NASA Specification
No. of
Contact
Pos.
(Shell
Size)
Pin
Wire Size
Range
22-28
0.4-0.08
26-28
0.15-0.08
AMP Part No. /
NASA No.
204370-8
G-08-P1
206495-3
—
Max. insulation diameter .054 [1.38]
Hand tool AMP Part Number 601966-1
or MIL Part Number M22520/2-01
Positioner AMP Part Number 601966-6
or MIL Part Number M22520/2-09
Contact Material and Finish
Copper alloy, .000050–.000100
[0.00127–0.0254] thick gold plate over
.000100–.000150 [0.0254–0.00381]
thick copper underplate
C
B
15
(1)
.666
16.92
.329
8.36
.984 1.213
24.99 30.81
.235
5.97
.759 .494 .422 .422
19.28 12.55 10.72 10.72
26
(2)
.994
25.25
.329
8.36
1.312 1.541
33.32 39.14
.235
5.97
1.083 .494 .422 .422
27.51 12.55 10.72 10.72
44
(3)
1.534
38.96
.329
8.36
1.852 2.088
47.04 53.04
.230
5.84
1.625 .494 .422 .426
4.13 12.55 10.72 10.82
.329
8.36
D
Dimensions
F
G
A
H
J
L
62
(4)
2.182
55.42
2.500 2.729
63.5 69.32
.230
5.84
2.272 .494 .422 .426
57.7 12.55 10.72 10.82
78
(5)
2.079 .441 2.406 2.635
52.81 11.20 61.11 66.93
.230
5.84
2.178 .605 .534 .426
57.7 15.37 13.56 10.82
104
(6)
2.212 .503 2.500 2.729
56.18 12.78 63.5 69.32
.230
5.84
2.302 .668 .596 .426
58.47 16.97 15.14 10.82
K
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
NASA
Part Number
AMP
Part Number
311P407-1P-B-15
206498-1
311P407-1P-B-12
206498-4
311P407-2P-B-15
206500-1
311P407-2P-B-12
206500-4
311P407-3P-B-15
206063-2
311P407-3P-B-12
206063-4
311P407-4P-B-15
206502-1
311P407-4P-B-12
206502-4
311P407-5P-B-15
206504-1
311P407-5P-B-12
206504-4
311P407-6P-B-15
206066-2
311P407-6P-B-12
206066-4
Non-Magnetic Plugs With Silicone Rubber Rear Grommet1
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-1 or
MIL Part Number M81969/1-04
Insertion tip, for replacement
Part Number 126237-1
Extraction tip, for replacement
Part Number 126195-2
1
Dimensions
F
G
A
B
C
D
.666
16.92
.994
25.25
1.534
38.96
2.182
55.42
2.079
52.81
2.212
56.18
.329
8.36
.329
8.36
.329
8.36
.329
8.36
.441
11.20
.503
12.78
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
2.500
63.5
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.235
5.97
.235
5.97
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.7
2.178
55.32
2.302
58.47
H
J
K
L
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.596
15.14
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.426
10.82
AMP
Part Number
211673-4
211674-4
211675-4
211676-4
211677-4
211678-4
Grommet provided for cable strain relief.
8-74
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Non-Magnetic Crimp
Receptacles, Series 90,
High Density Connectors
(NASA Qualified)
A
± .005
[± 0.13]
(Outside)
J
± .005
[± 0.13]
Dia.
2 Holes
Connector Material and Finish
Shell — Brass, gold plated
Insert — Approved material per
MIL-DTL-24308
Retention Clips — Copper alloy
B
± .005
[± 0.13]
C
(Outside)
± .005
[± 0.13]
D
± .015
[± 0.38]
Mating Face
Related Product Data
Cavity Identification — page 8-69
Mounting, Mating Specifications —
page 8-90
Accessories — pages 8-95 to 8-97
.243 ± .005
[6.17 ± 0.13]
F
± .015
[± 0.38]
.375
[9.53]
Max.
.070
Max.
[1.78]
.429 ± .010
[10.90 ± 0.25]
E
.125
Ref.
[3.18]
Grommet style only
± .010
[± 0.25]
G
± .010
[± 0.25]
Non-Magnetic Receptacles per NASA Specification
No. of
Contact
Pos.
(Shell
Size)
Socket
Dimensions
D
E
B
C
15
(1)
.643
16.33
.311
7.9
.984
24.99
1.213
30.81
26
(2)
.971
24.66
.311
7.9
1.312
33.32
Max. insulation diameter .054 [1.38]
Hand tool AMP Part Number 601966-1
or MIL Part Number M22520/2-01
Positioner AMP Part Number 601966-4
or MIL Part Number M22520/2-06
44
(3)
1.511
38.38
.311
7.9
62
(4)
2.159
54.84
Contact and Hood Material
and Finish
78
(5)
104
(6)
Wire Size
Range
22-28
0.4-0.08
26-28
0.15-0.08
AMP Part No. /
NASA No.
206071-1
G-08-S1
206496-1
—
Copper alloy, .000050–.000100
[0.00127–0.0254] thick gold plate over
.000100–.000150 [0.0254–0.00381]
thick copper underplate
F
G
.759
19.28
.494
12.55
.422
10.72
1.541
39.14
1.083
27.51
.494
12.55
.422
10.72
1.852
47.04
2.088
53.04
1.625
41.3
.494
12.55
.422
10.72
.311
7.9
2.500
63.5
2.729
69.32
2.272
57.7
.494
12.55
.422
10.72
2.064
52.43
.423
10.74
2.406
61.11
2.635
66.93
2.178
55.32
.605
15.37
.534
13.56
2.189
55.6
.485
12.32
2.500
63.5
2.729
69.32
2.302
58.47
668
16.97
.596
15.14
NASA
Part Number
AMP
Part Number
311P407-1S-B-15
206499-1
311P407-1S-B-12
206499-4
311P407-2S-B-15
206501-1
311P407-2S-B-12
206501-4
311P407-3S-B-15
206064-2
311P407-3S-B-12
206064-4
311P407-4S-B-15
206503-1
311P407-4S-B-12
206503-4
311P407-5S-B-15
206505-1
311P407-5S-B-12
206505-4
311P407-6S-B-15
206065-2
311P407-6S-B-12
206065-4
J
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
.154
3.91
.120
3.05
8
Rectangular Pin and Socket Connectors
A
Non-Magnetic Receptacles With Silicone Rubber Rear Grommet1
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-1 or
MIL Part Number M81969/1-04
Insertion tip, for replacement
Part Number 126237-1
Extraction tip, for replacement
Part Number 126195-2
1
A
B
C
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
2.189
55.6
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
.485
12.32
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
2.500
63.5
Dimensions
D
E
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.7
2.178
55.32
2.302
58.47
F
G
J
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.596
15.14
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
.120
3.05
AMP
Part Number
211667-4
211668-4
211669-4
211670-4
211671-4
211672-4
Grommet provided for cable strain relief.
8-75
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Crimp Blindmate Plugs,
Series 90, High Density
Connectors
Material and Finish
Shell, Front — Aluminum alloy, cadmium plated with yellow chromate
1 Shell, Front for RoHS
Compliant — Aluminum alloy, zinc
plated with yellow trivalent chromate
Shell, Rear — Steel, cadmium plated
with yellow chromate
1 Shell, Rear for RoHS
Compliant — Steel, zinc plated with
yellow trivalent chromate
Insert Assembly — Approved material per MIL-DTL-24308
Retention Clips — Stainless steel
.480 ± .015
[12.01/11.83]
Related Product Data
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting Specifications —
page 8-90
Flange to flange spacing can be a max.
of .270 [6.86] for Blindmate connectors.
No. of
Contact
Pos.
(Shell
Size)
A
B
C
D
15
(1)
.656
16.66
.324
8.23
.984
24.99
1.224
31.09
26
(2)
.984
25.0
.324
8.23
1.312
33.32
44
(3)
1.524
38.71
.324
8.23
62
(4)
2.172
55.17
78
(5)
104
(6)
Blindmate Plugs with
Floating Bushings
Material and Finish
Shell — Aluminum alloy per 6061,
cadmium plated per QQ-P-416, Type II,
Class 2 over copper per MIL-C-14550,
Class 4.
Insert Assembly — Diallyl phthalate
per MIL-M-14, Type SDG-F; or polyester per MIL-M-24519, Type GPT-30F;
or polyphenylene sulfide (PPS) per MILM-24519, Type GST-40F.
Floating Bushing/Washer —
Stainless steel per ASTM-A-582, passivated per QQ-P-35B. Floats .008 ± .004
[0.20 ± 0.10] vertically and .031 [0.79]
horizontally.
1
Part Number
F
G
H
.769/.750
19.53/19.05
.506
12.85
.432/.413
10.97/10.49
.257
6.53
213153-1
1.552
39.42
1.093/1.074
27.76/27.28
.506
12.85
.432/.413
10.97/10.49
.257
6.53
445010-1
1.852
47.04
2.099
53.31
1.635/1.616
41.53/41.05
.506
12.85
.432/.413
10.97/10.49
.257
6.53
445011-1
5-445011-11
.324
8.23
2.500
63.5
2.740
69.6
2.282/2.263
57.96/57.48
.506
12.85
.432/.413
10.97/10.49
.257
6.53
213118-1
2.082
52.88
.444
11.28
2.406
61.11
2.646
67.21
2.188/2.167
55.58/55.04
.617
15.67
.544/.525
13.82/13.34
.257
6.53
445012-1
5-445012-11
2.212
56.18
.503
12.78
2.500
63.5
2.740
69.6
2.302
58.47
.680
17.27
.606/.587
15.39/14.91
.267
6.78
212933-3
See Material and Finish for RoHS compliant Part Numbers above.
D
C
A
B
Related Product Data
F
.130
[3.30]
Max.
H
Cavity Identification — page 8-69
Contacts — pages 8-70 and 8-71
Mounting Specifications —
page 8-90
Flange to flange spacing can be a max.
of .270 [6.86] for Blindmate connectors.
No. of
Contact
Pos.
(Shell
Size)
Dimensions
E
.031
[0.79]
.553–.569
[14.05–14.45]
.039–.049
[0.99–1.24]
.031
[0.79]
.375
Max.
[9.53]
Swaged Side of
Washer This Side
G
E
Dimensions
Part Number
A
B
C
D
E
F
G
H
104
(6)
2.213/2.217
56.21/56.31
.504/.508
12.80/12.90
2.495/2.505
63.37/63.63
2.714/2.744
68.94/69.70
2.307/2.319
58.60/58.90
.673/.683
17.09/17.35
.602/.614
15.29/15.59
.254/.260
6.45/6.60
1757207-6
44
(3)
1.522/1.526
38.66/38.76
.321/.327
8.15/8.31
1.847/1.857
46.91/47.17
2.073/2.103
52.65/53.42
1.630/1.642
41.40/41.71
.499/.509
12.67/12.93
.432/.444
10.97/11.28
.254/.260
6.45/6.60
1757207-3
Note: Additional sizes available upon request.
8-76
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Straight PCB, Series 90,
High Density Connectors
(Industrial Grade)
Material and Finish
1
Shell — Steel, cadmium plated
Shell for RoHS Compliant —
Steel, zinc plated
Insert — Polyphenylene Sulfide (PPS)
Retention Clips — Stainless steel
2
Related Product Data
Cavity Identification — page 8-69
Contacts — page 8-71
Mounting, Mating Dimensions —
page 8-90
Accessories — pages 8-95 to 8-97
PCB Layouts — See page 8-92 or
TE Connectivity customer drawing
Replacement Pin Contact
Part Number 207683-8
F
± .006 [0.15] (Plug)
± .005 [0.13] (Rcpt)
Plugs
1
2
Replacement Socket Contact
Part Number 207684-4
A
(Inside)
B
(Inside)
C
D
Dimensions
F
G
H
J
K
Part Number
.666
16.92
.994
25.25
1.534
38.96
2.182
55.42
2.079
52.81
2.212
56.18
.329
8.36
.329
8.36
.329
8.36
.329
8.36
.441
11.20
.503
12.78
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
2.500
63.5
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.235
5.97
.235
5.97
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.7
2.178
55.32
2.302
58.47
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.596
15.14
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.426
10.82
208866-11
5-208866-12
208867-11
5-208867-12
208868-11
5-208868-12
208869-11
5-208869-12
208870-11
5-208870-12
208871-11
5-208871-12
8
Rectangular Pin and Socket Connectors
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
See Material and Finish above.
See Material and Finish for RoHS compliant Part Numbers above.
Receptacles
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
1
2
A
B
(Outside) (Outside)
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
2.189
55.6
.311
7.9
.311
7.9
.311
7.9
.311
7.9
.423
10.74
.485
12.32
C
D
Dimensions
F
G
H
J
K
Part Number
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.5
2.406
61.11
2.500
63.5
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.759
19.28
1.083
27.51
1.625
41.3
2.272
57.7
2.178
55.32
2.302
58.47
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
.422
10.72
.422
10.72
.422
10.72
.422
10.72
.534
13.56
.596
15.14
.429
10.9
.429
10.9
.429
10.9
.429
10.9
.429
10.9
.429
10.9
208872-11
5-208872-12
208873-11
5-208873-12
208874-11
5-208874-12
208875-11
5-208875-12
208876-11
5-208876-12
208877-11
5-208877-12
See Material and Finish above.
See Material and Finish for RoHS compliant Part Numbers above.
8-77
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Right-Angle PCB, Series 90,
with Female Screwlocks
Material and Finish
Shell — Brass, gold over copper
plated
Insert — Diallyl phthalate or polyester
or Polyphenylene Sulfide (PPS)
B
.450 ± .010
[11.43 ± 0.25]
Position 1
(Receptacle)
E
G
.062
Ref.
[1.57]
.528 ± .010
[13.41 ± 0.25]
D
.606 ± .010
[15.39 ± 0.25]
.670 ± .010
[17.02 ± 0.25]
.020 ± .003
[0.51 ± 0.08]
C
.150 ± .025
[3.81 ± 0.64]
A
CL of
Mounting
Hole
Shell Size 1 thru 4
F
C
J
Plugs
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
A
B
C
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.666
16.92
.994
25.25
1.534
38.96
2.182
55.42
2.079
52.81
2.213
56.21
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.50
2.406
61.11
2.500
63.50
A
B
C
1.213
30.81
1.541
39.14
2.088
53.04
2.729
69.32
2.635
66.93
2.729
69.32
.643
16.33
.971
24.66
1.511
38.38
2.159
54.84
2.064
52.43
2.188
55.58
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.50
2.406
61.11
2.500
63.50
Dimensions
D
E
.329
8.36
.329
8.36
.329
8.36
.329
8.36
.441
11.20
.503
12.78
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
F
G
J
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.426
10.82
.246 ±.010
6.25 ± 0.25
.246 ±.010
6.25 ± 0.25
.246 ±.010
6.25 ± 0.25
.246 ±.010
6.25 ± 0.25
.246 ±.010
6.25 ± 0.25
.246 ±.010
6.25 ± 0.25
1.204
30.58
1.532
38.91
2.077
52.76
2.720
69.09
2.626
66.70
2.720
69.09
F
G
J
.422
10.72
.422
10.72
.426
10.82
.426
10.82
.426
10.82
.426
10.82
.248 ±.010
6.30 ± 0.25
.248 ±.010
6.30 ± 0.25
.248 ±.010
6.30 ± 0.25
.248 ±.010
6.30 ± 0.25
.248 ±.010
6.30 ± 0.25
.248 ±.010
6.30 ± 0.25
1.204
30.58
1.532
38.91
2.077
52.76
2.720
69.09
2.626
66.70
2.726
69.24
Part Number
1-593326-7
1-593326-8
1-593326-9
2-593326-0
2-593326-1
2-593326-2
Receptacles
No. of
Contact
Pos.
(Shell
Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
Dimensions
D
E
.311
7.90
.311
7.90
.311
7.90
.311
7.90
.423
10.74
.485
12.32
.494
12.55
.494
12.55
.494
12.55
.494
12.55
.605
15.37
.668
16.97
Part Number
1-593327-7
1-593327-8
1-593327-9
2-593327-0
2-593327-1
2-593327-2
8-78
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 (Continued)
Connector Savers,
Series 90, High Density
Connectors
Connector savers prolong
the life of permanently
installed connectors which
would otherwise be subjected to repeated cycles
of mating and unmating, in
applications such as test
interfaces or on testing
devices.
Material and Finish
A
(Outside)
B
(Outside)
C
.643
16.33
.311
7.9
.984
24.99
.971
24.66
.311
7.9
1.511
38.38
Dimensions
D
E
(Inside)
F
G
(Inside)
H
1.213
30.81
.666
16.92
.494
12.55
.329
8.36
.235
5.97
1.312
33.32
1.541
39.14
.994
25.25
.494
12.55
.329
8.36
.235
5.97
.311
7.9
1.852
47.04
2.088
53.04
1.534
38.96
.494
12.55
.329
8.36
.230
5.84
2.159
54.84
.311
7.9
2.500
63.5
2.729
69.32
2.182
55.42
.494
12.55
.329
8.36
.230
5.84
2.064
52.43
.423
10.74
2.406
61.11
2.635
66.93
2.079
52.81
.605
15.37
.441
11.20
.230
5.84
2.189
55.60
.485
12.32
2.500
63.5
2.729
69.32
2.212
56.18
.668
16.97
.503
12.78
.230
5.84
No. of
Contact
Pos.
(Shell Size)
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
Standard
(Cadmium
Over Steel)
Non-Magnetic
(Gold Over
Brass)
211010-1
211010-4
211011-1
211011-4
211012-1
211012-4
211013-1
211013-4
211014-1
211014-4
211015-1
211015-4
8
Rectangular Pin and Socket Connectors
Standard
Shell — Steel, cadmium plated
Contact Body — Beryllium copper,
.000050 [0.00127] min. gold plate
over .000050 [0.00127] min. nickel
underplate
Socket Hood — Passivated
stainless steel
Insert — Polyphenylene Sulfide
(PPS)
Spacer — Black nylon
Non Magnetic
Shell — Brass, gold plated
Contact Body — Beryllium copper,
.000050 [0.00127] min. gold plate
over .000050 [0.00127] min. copper
underplate
Socket Hood — Brass, .000050
[0.00127] min. gold plate over
.000100 [0.00254] min. copper
underplate
Insert — Polyphenylene Sulfide
(PPS)
Spacer — Black nylon
8-79
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Series 90 Cross
(Continued)
Reference
Material and Finish
Series 90 Connectors
Shell — Steel, tin plated per
ASTM-B-545, .000400–.000550
[0.01016–0.01397] thick.
Insert — Approved material per
MIL-DTL-24308.
Retention Clips — Stainless steel or
copper alloy.
No. of Contact Pos.
(Shell Size)
Related Product Data
Series 90 Connectors —
pages 8-72 to 8-75
Attention: Connector Marking
Connector marking may differ from
package marking.
Note: Meets 48 hr. salt spray requirements of MIL-DTL-24308.
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
104
(6)
Part Number
204501-6
204501-5
204500-4
204503-5
204503-4
204502-4
204505-6
204505-5
204504-5
204507-6
204507-5
204506-6
204509-7
204509-8
204508-5
—
—
—
Description
Plug
Plug
Plug
Plug
Plug
Plug
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Plug Only
Only with Grounding
Receptacle Only
Dimensions
Indents
Refer to pages
6-69 to 6-72
Indents
Refer to pages
6-69 to 6-72
Indents
Refer to pages
6-69 to 6-72
Indents
Refer to pages
6-69 to 6-72
Indents
Refer to pages
6-69 to 6-72
Indents
Refer to pages
6-69 to 6-72
8-80
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
Product Facts
■
One-piece aluminum
shells for light-weight and
enhanced EMI performance
■
Connectors are typically
15–20% lighter than brass
counterparts
■
Intermates/interchanges
with existing designs
■
Enhanced EMI performance
over brass shells by
10–20 dB
■
Series 109 Plugs &
Receptacles shell size 1
through 5 (9-50 positions)
■
Series 90 Plugs &
Receptacles in shell size 1
through 6 (15-104 positions)
■
Can be provided with or
without grommet
■
Plug shells include
grounding indents
■
Designed to meet NASA
311P
■
Designed to meet
MIL-DTL-24308D
specification
■
DSCC Drawings 99012
through 99015
Material and Finish
Housing Material — Polyphenylene
Sulfide (PPS)
Shell Finish — .000050 [0.00127]
min. gold plate over .00100–.00125
[0.0254–0.0318] nickel underplate
Shell Material — Aluminum alloy
Temperature Range —
–67°F to 257°F [–55°C to 125°C]
Voltage Rating — 300 V
Current Rating — Contact current
rating per MIL-C-39029
Size 20 — 7.5 amps in free air
Size 22 — 5.0 amps in free air
(refer to MIL Spec. for cable
specifications)
Low Level Termination
Resistance — 11 Ohm max. 109 Series,
17 milliohms only for 90 Series per
MIL-C-39029
Performance Characteristics
Dielectric Withstanding Voltage —
1000 VAC between adjacent pos.
Insulation Resistance — Min. 1000
milliohm between adjacent pos.
Voltage Rating — 300 V
Durability — Up to 500 matings/cycle
Vibration — 3.13 G’s RMS between
5–500 Hz 15 minutes per plane
Physical Shock — 18 drops, half-sine
30 G’s at 11 millisecond
Temperature Range —
–67°F to 257°F [–55°C to 125°C]
Thermal Shock — –67°F to 257°F
[–55°C to 125°C]
Temperature-Humidity — 77°F to
149°F [+25°C to +65°C] at 95% relative
humidity
Corrosion — Mixed flowing gas,
class II
Product Specifications —
108-1834 (Design objectives)
8
Rectangular Pin and Socket Connectors
Weight Comparisons for the AMPLIMITE Connector Series 90 (1) PC AL vs the
(2) PC Brass NASA Grade Connector Assemblies
Receptacles
Shell
Size
Connector
Position
1
2
3
4
5
6
15
26
44
62
78
104
Plugs
Aluminum
Shell Assy.
Without
Grommet
4
6.2
9
12.4
15.3
17.2
Brass
Shell Assy.
Without
Grommet
5.2
7.5
10.9
15.3
17.9
20
Note: All weight values are in grams.
Brass to Aluminum
% Difference
Without
Grommet
23.1%
17.3%
17.4%
19.0%
14.5%
14.0%
Shell
Size
Connector
Position
1
2
3
4
5
6
15
26
44
62
78
104
Aluminum
Shell Assy.
Without
Grommet
3.6
5.3
7.8
10.9
12.7
14.3
Brass
Shell Assy.
Without
Grommet
4.6
6.2
10.3
14.1
15.9
17.5
Brass to Aluminum
% Difference
Without
Grommet
21.7%
14.5%
24.3%
22.7%
20.1%
18.3%
Note: All weight values are in grams.
8-81
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
ULTRA-LITE Connector Plugs
and Receptacles, Series 109
B
Connector Material and Finish
Shell — Aluminum alloy, gold plated
per MIL-G-45204 over nickel per
MIL-C-26074.
Insert — Blue diallyl phthalate per
MIL-M-14 or black Polyphenylene
Sulfide (PPS) per MIL-M-24519 or blue
thermoplastic per MIL-M-24519
Retention Clips — Beryllium copper
Grommet — Silicon rubber per
ZZ-R-765, color: red
Contacts — Uses size 20 crimp or
posted contacts, ref. pages 8-40 to
8-42.
10˚ Typ.
C
A
G
L
± .015
[± 0.38]
± .006
[± 0.15]
E
± .015
[± 0.38]
± .010
[± 0.25]
.525 ± .010
[13.59 ± 0.25]
.375
Max.
[9.52]
.125
[3.18]
Grommet
Plugs
No. of
Contact
Pos.
(Shell
Size)
ØM
2 Plcs.
D
H
J
± .008
[± 0.20]
A
B
C
D
Dimensions
E
9
(1)
1.213
30.81
.666
16.92
.984
24.99
.329
8.36
.494
12.55
.235
5.97
.770
19.56
.438
11.13
.030
0.76
311P409-1P-B-15
15
(2)
1.541
39.14
.994
25.25
1.312
33.32
.329
8.36
.494
12.55
.235
5.97
1.094
27.79
.438
11.13
.030
0.76
311P409-2P-B-15
25
(3)
2.088
53.04
1.534
38.96
1.852
47.04
.329
8.36
.494
12.55
.230
5.84
1.636
41.55
.438
11.13
.039
0.99
311P409-3P-B-15
37
(4)
2.729
69.32
2.182
55.42
2.500
63.50
.329
8.36
.494
12.55
.230
5.84
2.284
58.01
.438
11.13
.039
0.99
311P409-4P-B-15
50
(5)
2.635
66.93
2.079
52.81
2.406
61.11
.441
11.20
.605
15.38
.230
5.84
2.189
55.60
.550
13.97
.039
0.99
311P409-5P-B-15
G
H
J
L
NASA1
Part Number
for reference only
± .006
[± 0.15]
AMP RoHS
Part Number
.120
.154
M = [3.05]
M = [3.91]
1218234-1
1218234-6*
1218234-2
1218234-7*
1218234-3
1218234-8*
1218234-4
1218234-9*
1218234-5
1-1218234-0*
1883005-1
1883005-2
1883005-3
1883005-4
1883005-5
*Rubber Grommet
.243
[6.17]
B
ØM
2 Plcs.
D
L
E
± .015
[± 0.38]
± .010
[± 0.25]
.530 ± .010
[13.46 ± 0.25]
.375
Max.
[9.52]
10˚ Typ.
C
A
± .015
[± 0.38]
.125
[3.18]
Grommet
Receptacles
No. of
Contact
Pos.
(Shell
Size)
H
J
± .008
[± 0.20]
A
B
C
D
Dimensions
E
9
(1)
1.213
30.81
.643
16.33
.984
24.99
.311
7.90
.494
12.55
.770
19.56
.438
11.13
.030
0.76
311P409-1S-B-15
15
(2)
1.541
39.14
.971
24.66
1.312
33.32
.311
7.90
.494
12.55
1.094
27.79
.438
11.13
.030
0.76
311P409-2S-B-15
25
(3)
2.088
53.04
1.511
38.38
1.852
47.04
.311
7.90
.494
12.55
1.636
41.55
.438
11.13
.039
0.99
311P409-3S-B-15
37
(4)
2.729
69.32
2.159
54.84
2.500
63.50
.311
7.90
.494
12.55
2.284
58.01
.438
11.13
.039
0.99
311P409-4S-B-15
50
(5)
2.635
66.93
2.064
52.43
2.406
61.11
.423
10.74
.605
15.38
2.189
55.60
.550
13.97
.039
0.99
311P409-5S-B-15
H
J
L
NASA1
Part Number
for reference only
± .006
[± 0.15]
AMP RoHS
Part Number
.120
.154
M = [3.05]
M = [3.91]
1218235-1
1218235-6*
1218235-2
1218235-7*
1218235-3
1218235-8*
1218235-4
1218235-9*
1218235-5
1-1218235-0*
1883006-1
1883006-2
1883006-3
1883006-4
1883006-5
*Rubber Grommet
1Tyco Electronic part numbers are not NASA qualified parts but can replace referenced NASA part numbers.
8-82
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
ULTRA-LITE Connector Plugs
and Receptacles, Series 90
Connector Material and Finish
Shell — Aluminum alloy, gold plated
per MIL-G-45204 over nickel per
MIL-C-26074.
Insert — Blue diallyl phthalate per
MIL-M-14 or black Polyphenylene
Sulfide (PPS) per MIL-M-24519 or blue
thermoplastic per MIL-M-24519
Retention Clips — Beryllium copper
Grommet — Silicon rubber per
ZZ-R-765, color: red
Contacts — Uses size 22 crimp and
posted contacts, ref. pages 8-70 and
8-71.
B
G
± .006
[± 0.15]
E
± .015
[± 0.38]
± .010
L
ØM
[± 0.25]
2 Plcs.
.525 ± .010
[13.34 ± 0.25]
D
.375
Max.
[9.52]
10˚ Typ.
C
A
.125
[3.18]
Grommet
± .015
[± 0.38]
H
J
± .008
[± 0.20]
± .006
[± 0.15]
Plugs
No. of
Contact
Pos.
(Shell
Size)
A
B
C
D
Dimensions
E
15
(1)
1.213
30.81
.666
16.92
.984
24.99
.329
8.36
.494
12.55
.235
5.97
.770
19.56
.438
11.13
.030
0.76
311P407-1P-B-15
26
(2)
1.541
39.14
.994
25.25
1.312
33.32
.329
8.36
.494
12.55
.235
5.97
1.094
27.79
.438
11.13
.030
0.76
311P407-2P-B-15
44
(3)
2.088
53.04
1.534
38.96
1.852
47.04
.329
8.36
.494
12.55
.230
5.84
1.636
41.55
.438
11.13
.039
0.99
311P407-3P-B-15
62
(4)
2.729
69.32
2.182
55.42
2.500
63.50
.329
8.36
.494
12.55
.230
5.84
2.284
58.01
.438
11.13
.039
0.99
311P407-4P-B-15
78
(5)
2.635
66.93
2.079
52.81
2.406
61.11
.441
11.20
.605
15.38
.230
5.84
2.189
55.60
.550
13.97
.039
0.99
311P407-5P-B-15
104
(6)
2.729
69.32
2.212
56.18
2.500
63.50
.503
12.78
.668
16.97
.230
5.84
2.313
58.75
.608
15.44
.039
0.99
311P407-6P-B-15
G
H
J
L
NASA1
Part Number
for reference only
*Rubber Grommet
AMP RoHS
Part Number
.120
.154
M = [3.05]
M = [3.91]
1218232-1
1218232-7*
1218232-2
1218232-8*
1218232-3
1218232-9*
1218232-4
1-1218232-0*
1218232-5
1-1218232-1*
1218232-6
1-1218232-2*
.238–.248
[6.05–6.30]
B
1883007-1
1883007-2
1883007-3
1883007-4
1883007-5
1883007-6
E
± .015
[± 0.38]
8
± .010
L
ØM
[± 0.25]
2 Plcs.
Rectangular Pin and Socket Connectors
.530 ± .010
[13.46 ± 0.25]
D
.375
Max.
[9.52]
10˚ Typ.
C
A
± .015
[± 0.38]
Receptacles
No. of
Contact
Pos.
(Shell
Size)
J
.125
[3.18]
Grommet
H
± .008
[± 0.20]
A
B
C
D
Dimensions
E
15
(1)
1.213
30.81
.644
16.36
.984
24.99
.311
7.90
.494
12.55
.770
19.56
.438
11.13
.030
0.76
311P407-1S-B-15
26
(2)
1.541
39.14
.972
24.69
1.312
33.32
.311
7.90
.494
12.55
1.094
27.79
.438
11.13
.030
0.76
311P407-2S-B-15
44
(3)
2.088
53.04
1.512
38.40
1.852
47.04
.311
7.90
.494
12.55
1.636
41.55
.438
11.13
.039
0.99
311P407-3S-B-15
62
(4)
2.729
69.32
2.160
54.86
2.500
63.50
.311
7.90
.494
12.55
2.284
58.01
.438
11.13
.039
0.99
311P407-4S-B-15
78
(5)
2.635
66.93
2.065
52.45
2.406
61.11
.423
10.74
.605
15.38
2.189
55.60
.550
13.97
.039
0.99
311P407-5S-B-15
104
(6)
2.729
69.32
2.190
55.63
2.500
63.50
.485
12.32
.668
16.97
2.313
58.75
.608
15.44
.039
0.99
311P407-6S-B-15
H
J
L
NASA1
Part Number
for reference only
± .006
[± 0.15]
AMP RoHS
Part Number
.120
.154
M = [3.05]
M = [3.91]
1218233-1
1218233-7*
1218233-2
1218233-8*
1218233-3
1218233-9*
1218233-4
1-1218233-0*
1218233-5
1-1218233-1*
1218233-6
1-1218233-2*
-1
1883008-2
1883008-3
1883008-4
1883008-5
1883008-6
*Rubber Grommet
1Tyco Electronic part numbers are not NASA qualified parts but can replace referenced NASA part numbers.
8-83
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
ULTRA-LITE Connector
Plugs and Receptacles,
Series 109, Crimp
Meets EU Directive
2002/95/EC RoHS
B
E
D
10° Typ.
C
.028 ± .011 Typ.
[0.71 ± 0.28]
A
K
H
.330 ± .010
[8.38 ± 0.25]
.270
Min.
[6.86]
.425
Max.
[10.79]
G Typ.
Ø .230 ± .010
[5.84 ± 0.25]
Plugs
A
B
C
Dimensions
D
E
G ± .010 [0.25]
H
K
1.208/1.218
30.68/30.94
1.536/1.546
39.01/39.27
2.083/2.093
52.91/53.16
2.724/2.734
69.20/69.44
2.630/2.640
66.80/67.06
.661/.671
16.79/17.04
.989/.999
25.12/25.37
1.529/1.239
38.84/39.09
2.177/2.187
55.30/55.55
2.074/2.084
52.68/52.93
.979/.989
24.87/25.12
1.307/1.317
33.20/33.45
1.848/1.857
46.91/47.17
2.495/2.505
63.37/63.63
2.401/2.411
60.99/61.24
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.436/.446
11.07/11.33
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.500/.610
15.24/15.49
.294
7.47
.294
7.47
.299
7.59
.299
7.59
.299
7.59
.229/.241
5.82/6.12
.229/.241
5.82/6.12
.224/.236
5.69/5.99
.224/.236
5.69/5.99
.224/.236
5.69/5.99
.035
0.89
.035
0.89
.044
1.12
.044
1.12
.044
1.12
No. of Contact Pos.
(Shell Size)
A
B
C
Dimensions
D
E
G ± .010 [0.25]
H
K
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
1.208/1.218
30.68/30.94
1.536/1.546
39.01/39.27
2.083/2.093
52.91/53.16
2.724/2.734
69.20/69.44
2.630/2.640
66.80/67.06
.638/.648
16.21/16.46
.966/.976
24.54/24.79
1.506/1.516
38.25/38.51
2.154/2.164
54.71/54.97
2.059/2.069
52.30/52.55
.979/.989
24.87/25.12
1.307/1.317
33.20/33.45
1.847/1.857
46.91/47.17
2.495/2.505
63.37/63.63
2.401/2.411
60.99/61.24
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.418/.428
10.62/10.87
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.600/.610
15.24/15.49
.290
7.37
.290
7.37
.290
7.37
.290
7.37
.290
7.37
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.270
6.86
.035
0.89
.035
0.89
.044
1.12
.044
1.12
.044
1.12
No. of Contact Pos.
(Shell Size)
9
(1)
15
(2)
25
(3)
37
(4)
50
(5)
NASA1
Part Number
AMP
Part Number
for reference only
311P409-1P-B-440
1883053-1
311P409-2P-B-440
1883053-2
311P409-3P-B-440
1883053-3
311P409-4P-B-440
1883053-4
311P409-5P-B-440
1883053-5
NASA1
Part Number
AMP
Part Number
Receptacles
1Tyco
for reference only
311P409-1S-B-440
1883054-1
311P409-2S-B-440
1883054-2
311P409-3S-B-440
1883054-3
311P409-4S-B-440
1883054-4
311P409-5S-B-440
1883054-5
Electronic part numbers are not NASA qualified parts but can replace referenced NASA part numbers.
8-84
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
ULTRA-LITE Connector
Plugs and Receptacles,
Series 109, Crimp (Continued)
Meets EU Directive
2002/95/EC RoHS
B
E
D
10° Typ.
C
.028 ± .011 Typ.
[0.71 ± 0.28]
A
K
H
.330 ± .010
[8.38 ± 0.25]
.270
Min.
[6.86]
Plugs
G Typ.
.425
Max.
[10.79]
Ø .230 ± .010
[5.84 ± 0.25]
No. of Contact Pos.
(Shell Size)
A
B
C
Dimensions
D
E
G ± .010 [0.25]
H
K
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
1.208/1.218
30.68/30.94
1.536/1.546
39.01/39.27
2.083/2.093
52.91/53.16
2.724/2.734
69.20/69.44
2.630/2.640
66.80/67.06
.661/.671
16.79/17.04
.989/.999
25.12/25.37
1.529/1.539
38.84/39.09
2.177/2.187
55.30/55.55
2.074/2.084
52.68/52.93
.979/.989
24.87/25.12
1.307/1.317
33.20/33.45
1.847/1.857
46.91/47.17
2.495/2.505
63.37/63.63
2.401/2.411
60.99/61.24
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.324/.334
8.23/8.48
.436/.446
11.07/11.33
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/4.99
12.42/12.67
.600/.610
15.24/15.49
.294
7.47
.294
7.47
.299
7.59
.299
7.59
.299
7.59
.229/.241
5.82/6.12
.229/.241
5.82/6.12
.224/.236
5.69/5.99
.224/.236
5.69/5.99
.224/.236
5.69/5.99
.035
0.89
.035
0.89
.044
1.12
.044
1.12
.044
1.12
No. of Contact Pos.
(Shell Size)
A
B
C
Dimensions
D
E
G ± .010 [0.25]
H
K
15
(1)
26
(2)
44
(3)
62
(4)
78
(5)
1.208/1.218
30.68/30.94
1.536/1.546
39.01/39.27
2.083/2.093
52.91/53.16
2.724/2.734
69.20/69.44
2.630/2.640
66.80/67.06
.638/.648
16.21/16.46
.966/.976
24.54/24.79
1.506/1.516
38.25/38.51
2.154/2.164
54.71/54.97
2.059/2.069
52.30/52.55
.979/.989
24.87/25.12
1.307/1.317
33.20/33.45
1.847/1.857
46.91/47.17
2.495/2.505
63.37/63.63
2.401/2.411
60.99/61.24
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.306/.316
7.77/8.03
.418/.428
10.62/10.87
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.489/.499
12.42/12.67
.600/.610
15.24/15.49
.290
7.37
.290
7.37
.290
7.37
.290
7.37
.290
7.37
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.243
6.17
.035
0.89
.035
0.89
.044
1.12
.044
1.12
.044
1.12
NASA1
Part Number
for reference only
AMP
Part Number
311P407-1P-B-440
1883055-1
311P407-2P-B-440
1883055-2
311P407-3P-B-440
1883055-3
311P407-4P-B-440
1883055-4
311P407-5P-B-440
1883055-5
NASA1
Part Number
for reference only
AMP
Part Number
311P407-1S-B-440
1883056-1
311P407-2S-B-440
1883056-2
311P407-3S-B-440
1883056-3
311P407-4S-B-440
1883056-4
311P407-5S-B-440
1883056-5
Receptacles
8
B
Rectangular Pin and Socket Connectors
ULTRA-LITE Connector Plugs
and Receptacles, Coax Mix
E D
10° Typ.
C
.028 ± .011 Typ.
[0.71 ± 0.28]
A
K
H
.330 ± .010
[8.38 ± 0.25]
.270
Min.
[6.86]
Insert Arrangement
(Shell Size)
3C3
(2)
3C3
(2)
5C5
(3)
5C5
(3)
1Tyco
A
1.536/1.546
39.01/39.27
1.536/1.546
39.01/39.27
2.083/2.093
52.91/53.16
2.083/2.093
52.91/53.16
B
.989/.999
25.12/25.37
.966/.976
24.54/24.79
1.529/1.539
38.84/39.09
1.506/1.516
38.25/38.51
C
1.307/1.317
33.20/33.45
1.307/1.317
33.20/33.45
1.847/1.857
46.91/47.17
1.847/1.857
46.91/47.17
Dimensions
D
.324/.334
8.23/8.48
.306/.316
7.77/8.03
.324/.334
8.23/8.48
.306/.316
7.77/8.03
G Typ.
Ø .230 ± .010 Typ.
[5.84 ± 0.25]
E
G ± .010 [0.25]
.489/.499
.294
12.42/12.67
7.47
.489/.499
.290
12.42/12.67
7.37
.489/.499
.299
12.42/12.67
7.59
.489/.499
.290
12.42/12.67
7.37
H
.229/.241
5.82/6.12
.243
6.17
.224/.236
5.69/5.99
.243
6.17
K
.035
0.89
.035
0.89
.044
1.12
.044
1.12
NASA
Part Number
AMP
Part Number
311P405-7P-B-440
1883057-1
311P405-7S-B-440
1883058-1
311P405-10P-B-440
1883059-1
311P405-10S-B-440
1883060-1
Electronic part numbers are not NASA qualified parts but can replace referenced NASA part numbers.
8-85
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, ULTRA-LITE Connectors (Continued)
ULTRA-LITE AMPLIMITE
Connector Part Numbers vs.
NASA’s 311P Part Numbers
and DSCC Part Numbers
AMPLIMITE Connector
Series 90 (High Density
Sub “D”’s)
DSCC1
Part No.
w/Grommet
for reference only
DSCC1
Part No.
w/out Grommet
for reference only
NASA1
Part No.
w/out Grommet
for reference only
Plug /
Receptacle
Shell
Size
Position
99012SAFPRA-1
99012SAFPRA-2
99012SAFPRA-3
99012SAFPRA-4
99012SAFPRA-5
99012SAFPRA-6
99014SAESR-1
99014SAESR-2
99014SAESR-3
99014SAESR-4
99014SAESR-5
99014SAESR-6
99012NAFPR-1
99012NAFPR-2
99012NAFPR-3
99012NAFPR-4
99012NAFPR-5
99012NAFPR-6
99014NAESR-1
99014NAESR-2
99014NAESR-3
99014NAESR-4
99014NAESR-5
99014NAESR-6
311P407-1P-B-12
311P407-2P-B-12
311P407-3P-B-12
311P407-4P-B-12
311P407-5P-B-12
311P407-6P-B-12
311P407-1S-B-12
311P407-2S-B-12
311P407-3S-B-12
311P407-4S-B-12
311P407-5S-B-12
311P407-6S-B-12
Plug
Plug
Plug
Plug
Plug
Plug
Receptacle
Receptacle
Receptacle
Receptacle
Receptacle
Receptacle
1
2
3
4
5
6
1
2
3
4
5
6
15
26
44
62
78
104
15
26
44
62
78
104
ULTRA-LITE Connectors
Part No.
Part No.
w/out Grommet
with Grommet
1218232-1
1218232-2
1218232-3
1218232-4
1218232-5
1218232-6
1218233-1
1218233-2
1218233-3
1218233-4
1218233-5
1218233-6
1218232-7
1218232-8
1218232-9
1-1218232-0
1-1218232-1
1-1218232-2
1218233-7
1218233-8
1218233-9
1-1218233-0
1-1218233-1
1-1218233-2
AMPLIMITE Connector
Series 109 (Standard
Density Sub “D”’s)
DSCC1
Part No.
w/Grommet
for reference only
DSCC1
Part No.
w/out Grommet
for reference only
NASA1
Part No.
w/out Grommet
for reference only
Plug /
Receptacle
Shell
Size
Position
99013SAEPR-1
99013SAEPR-2
99013SAEPR-3
99013SAEPR-4
99013SAEPR-5
99015SAESR-1
99015SAESR-2
99015SAESR-3
99015SAESR-4
99015SAESR-5
99013NAEPR-1
99013NAEPR-2
99013NAEPR-3
99013NAEPR-4
99013NAEPR-5
99015NAESR-1
99015NAESR-2
99015NAESR-3
99015NAESR-4
99015NAESR-5
311P409-1P-B-12
311P409-2P-B-12
311P409-3P-B-12
311P409-4P-B-12
311P409-5P-B-12
311P409-1S-B-12
311P409-2S-B-12
311P409-3S-B-12
311P409-4S-B-12
311P409-5S-B-12
Plug
Plug
Plug
Plug
Plug
Receptacle
Receptacle
Receptacle
Receptacle
Receptacle
1
2
3
4
5
1
2
3
4
5
9
15
25
37
50
9
15
25
37
50
1Tyco
ULTRA-LITE Connectors
Part No.
Part No.
w/out Grommet
with Grommet
1218234-1
1218234-2
1218234-3
1218234-4
1218234-5
1218235-1
1218235-2
1218235-3
1218235-4
1218235-5
1218234-7
1218234-8
1218234-9
1-1218234-0
1-1218234-1
1218235-7
1218235-8
1218235-9
1-1218235-0
1-1218235-1
Electronic part numbers are not DSCC or NASA qualified parts but can replace referenced NASA part numbers.
8-86
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors, ULTRA-LITE Connectors (Continued)
Application Tools for
Series 109 (Size 20)
Crimp Contacts
Pin and Socket
Insertion/Extraction Tool
AMP Part Number 91067-2 or
MIL Part Number M81969/1-02
Insertion tip, for replacement
Part Number 126195-3
Extraction tip, for replacement
Part Number 126195-4
AMP-TAPEMATIC Stripper/
Crimper Machine Part Number
599406-7
Hand Crimping Tool
AMP Part Number 601966-1 or
MIL Part Number M22520/2-01
Funnel Part Number 125905-1 for
Size 20 Contacts
Positioner
AMP Part Number 601966-5 or
MIL Part Number M22520/2-08
The AMP-TAPEMATIC
Stripper/Crimper Machine
strips wire and applies an
8-indent crimp termination
per MIL-C-22520. The
machine terminates pin and
socket contacts which are
tape mounted and reel fed.
It offers production rates of
up to 1200 finished leads per
hour, provides overall lower
applied costs and maintains
a high degree of termination
reliability.
This standard military-type
hand tool terminates pins
and sockets to wire with an
8-indent, M22520/2 crimp. It
is ideally suited for prototype,
field maintenance and other
applications where volume
production is not a factor.
Application Tools for
Series 90 (Size 22)
Crimp Contacts
8
AMP Part Number 91067-1 or
MIL Part Number M81969/1-04
Insertion tip, for replacement
Part Number 126237-1
Extraction tip, for replacement
Part Number 126195-2
AMP-TAPEMATIC Stripper/
Crimper Machine Part Number
599406-7
Hand Crimping Tool
AMP Part Number 601966-1 or
MIL Part Number M22520/2-01
Funnel Part Number 125905-2 for
Size 22 Contacts
Positioner (Pin)
AMP Part Number 601966-6 or
MIL Part Number M22520/2-09
The AMP-TAPEMATIC
Stripper/Crimper Machine
strips wire and applies an
8-indent crimp termination
per MIL-C-22520. The
machine terminates pin and
socket contacts which are
tape mounted and reel fed.
It offers production rates of
up to 1200 finished leads per
hour, provides overall lower
applied costs and maintains
a high degree of termination
reliability.
Rectangular Pin and Socket Connectors
Pin and Socket
Insertion/Extraction Tool
Positioner (Socket)
AMP Part Number 601966-4 or
MIL Part Number M22520/2-06
This standard military-type
hand tool terminates pins
and sockets to wire with an
8-indent, M22520/2 crimp. It
is ideally suited for prototype,
field maintenance and other
applications where volume
production is not a factor.
8-87
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
Mating and Mounting
Specifications for
Series 109 and Series 90
Connectors
A
Plug Receptacle Mating
10° ± 2° (*5° ± 1° for Rear Mount
2 Plcs. Blindmate Connectors)
C
F
D
X
J*
Plug
E
Receptacle
G
K Radius
4 Plcs.
± .002
[± 0.05]
2 Plcs.
H*
B
C
L
Shell Sizes 1 and 2 —
x = .280/.250 [7.11/6.35]
Shell Sizes 3, 4, 5 and 6 —
x = .271/.241 [6.88/6.12]
Blindmate Connectors (all sizes) —
x = .270 [6.86] max.
The X dimension is
necessary for full mating
of connector halves. This
dimension must be taken into
consideration when determining the method of mounting, panel thickness, etc.
Panel Cutout
Shell Size
(No. of Contact Pos.)
Series 109
Series 90
Connectors
Connectors
Mounting Method
Front/Rear
WIth/WIthout
Panel
Flouting Bushing
Dimensions
A
B
With
Front
1
(9 Pos.)
Without
1
(15 Pos.)
With
Rear
.984 .492
24.99 12.5
Without
With
Front
2
(15 Pos.)
Without
2
(26 Pos.)
With
Rear
1.312 .656
33.32 16.66
Without
With
Front
3
(25 Pos.)
Without
3
(44 Pos.)
With
Rear
AMPLIMITE Plug,
Front-Panel Mounted
1.852 .926
47.04 23.52
Without
With
Front
4
(37 Pos.)
Without
4
(62 Pos.)
With
Rear
2.500 1.250
63.5 31.75
Without
With
Front
5
(50 Pos.)
Without
5
(78 Pos.)
With
Rear
AMPLIMITE Receptacle,
Rear-Panel Mounted
2.406 1.203
61.11 30.56
Without
With
Front
Attention: Front-Panel Mount
When front mounting a MIL-DTL-24308
connector utilizing the tab method of
securing shell halves, it is recommended
to utilize a .032 [0.81] thick washer
(not supplied) to prevent deformation of
connector flange.
—
Without
6
(104 Pos.)
With
Rear
Without
2.500 1.250
63.5 31.75
C
D
E
F
G
.906
23.01
.874
22.2
.838
21.29
.806
20.47
1.234
31.34
1.202
30.53
1.166
29.62
1.134
28.8
1.775
45.09
1.743
44.27
1.706
43.33
1.674
42.52
2.423
61.17
2.391
60.73
2.354
59.79
2.326
59.08
2.329
59.16
2.297
58.34
2.250
57.15
2.218
56.34
2.453
62.31
2.421
61.49
2.388
60.66
2.356
59.84
.453
11.51
.437
11.1
.419
10.64
.403
10.24
.617
15.67
.601
15.27
.583
14.81
.567
14.4
.888
22.55
.872
22.15
.853
21.67
.837
21.26
1.212
30.78
1.196
30.38
1.777
29.9
1.163
29.54
1.165
29.59
1.149
29.18
1.125
28.58
1.109
28.17
1.227
31.17
1.211
30.76
1.194
30.33
1.179
29.92
.545
13.84
.513
13.03
.481
12.22
.449
11.4
.545
13.84
.513
13.03
.481
12.22
.449
11.4
.545
13.84
.513
13.03
.481
12.22
.449
11.4
.545
13.84
.513
13.03
.481
12.22
.449
11.4
.655
16.64
.623
15.82
.587
14.91
.555
14.1
.717
18.21
.685
17.4
.654
16.61
.622
5.8
.273
6.93
.257
6.53
.241
6.12
.225
5.72
.273
6.93
.257
6.53
.241
6.12
.225
5.72
.273
6.93
.257
6.53
.241
6.12
.225
5.72
.273
6.93
.257
6.53
.241
6.12
.225
5.72
.328
8.33
.312
7.92
.294
7.47
.278
7.06
.359
9.12
.343
8.71
.327
8.31
.311
7.9
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
.088
2.24
.120
3.05
H*
J*
—
—
—
—
—
—
—
—
www.te.com
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
.083
2.11
.665 .662
6.64 16.81 .132
.623 .630 3.35
15.82 16
—
—
—
—
.083
2.11
1.197 .662
30.4 16.81 .132
1.165 .630 3.35
29.59 16
—
—
—
—
.083
2.11
1.845 .662
46.86 16.81 .132
1.813 .630 3.35
46.05 16
—
—
—
—
1.740
44.2
1.708
43.38
—
—
—
—
1.875
47.64
1.843
46.81
.083
2.11
.772
19.61 .132
.740 3.35
18.8
.083
2.11
.835
21.21 .132
.803 3.35
20.4
* Panel cutout configuration with these dimensions provides clearance for mounting connectors with cable clamp assemblies.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
.083
2.11
.332 .662
8.43 16.81 .132
.300 .630 3.35
7.62 16
8-88
Catalog 1308940
Revised 9-14
K
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
PCB Layouts — Series 109
(Standard Density)
C
L
.056
[1.42]
.056
[1.42]
.054
[1.37]
.492
[12.50]
2 Plcs.
.108 Typ.
[2.74]
.125
[3.18
2 Holes
ØA
Typ.
C
L
.056
[1.42]
.054
[1.37]
Shell Size 2
(15 Position)
.926
[23.52]
2 Plcs.
.125 ± .003
[3.18 ± 0.08]
2 Holes
ØA
Typ.
Shell Size 3
(25 Position)
.054
[1.37]
1.25
[31.75]
2 Plcs.
.125 ± .003
[3.18 ± 0.08]
2 Holes
ØA
Typ.
.109 Typ.
[2.77]
.056
[1.42]
.125 ± .003
[3.18 ± 0.08]
2 Holes
ØA
Typ.
.108 Typ.
[2.74]
.109 Typ.
[2.77]
C
L
.056
[1.42]
.656
[16.66]
2 Plcs.
.054
[1.37]
.056
[1.42]
Shell Size 1
(9 Position)
.056
[1.42]
C
L
.056
[1.42]
± .003
± 0.08]
Shell Size 4
(37 Position)
C
L
.054
[1.37]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.109 Typ.
[2.77]
.112
[2.84]
8
Rectangular Pin and Socket Connectors
.112
[2.84]
1.203
[30.56]
2 Plcs.
ØA
Typ.
Shell Size 5
(50 Position)
Post Diameter
.018 [0.46]
.025 [0.64]
.030 [0.76]
.040 [1.02]
.028
.035
.040
.050
[0.71]
[0.89]
[1.02]
[1.27]
ØA
— .038
— .045
— .050
— .060
[0.96]
[1.14]
[1.27]
[1.52]
Notes: 1. Mating face of plug is shown, receptacle is mirror image.
Notes: 2. PCB mounting hole diameters are provided for connectors with
.120 [3.05] diameter mounting holes. For connectors with
.154 [3.91] mounting holes, use PCB mounting hole diameter
.160 ± .003 [4.06 ± 0.08].
Notes: 3. PC layouts illustrated above serve as a guide only; they are not to
be used for actual design or construction of customer equipment.
Consult TE Connectivity customer print for detailed PC board
layout requirements.
8-89
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
PCB Layouts — Series 90
(High Density)
.492
[12.50]
2 Plcs.
C
L
.045
[1.14]
.080
[2.03]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.090
[2.29]
Typ.
.078
[1.98]
.078
[1.98]
Shell Size 2
(26 Position)
C
L
.045
[1.14]
.090
[2.29]
Typ.
ØA
Typ.
1.250 2 Plcs.
[31.75]
.072
[1.83]
.078
[1.98]
.078
[1.98]
.125 ± .003
[3.18 ± 0.08]
2 Holes
Shell Size 3
(44 Position)
1.203 2 Plcs.
[30.56]
.078
[1.98]
ØA
Typ.
.090
.125 ± .003 [2.29]
[3.18 ± 0.08] Typ.
2 Holes
.078
[1.98]
Shell Size 1
(15 Position)
.070
[1.78]
.041
[1.04]
.048
[1.21]
.095
[2.41]
Typ.
ØA
Typ.
.041
[1.04]
.123
[3.12]
.123
[3.12]
.095
[2.41]
Typ.
ØA
Typ.
.082
[2.08]
.164
[4.16]
.048
[1.21]
.095
[2.41]
Typ.
Shell Size 5
(78 Position)
.078
[1.98]
Shell Size 4
(62 Position)
1.250 2 Plcs.
[31.75]
.064
[1.62]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.078
[1.98]
.048
[1.21]
C
L
C
L
.048
[1.21]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.045
[1.14]
C
L
.926 2 Plcs.
[23.52]
.125 ± .003
[3.18 ± 0.08]
2 Holes
ØA
Typ.
C
L
.656
[16.66]
2 Plcs.
.070
[1.78]
ØA
Typ.
.082
[2.08]
Shell Size 6
(104 Position)
Post Diameter
.018 [0.46]
.025 [0.64]
.030 [0.76]
.040 [1.02]
.028
.035
.040
.050
[0.71]
[0.89]
[1.02]
[1.27]
ØA
— .038
— .045
— .050
— .060
[0.96]
[1.14]
[1.27]
[1.52]
Notes: 1. Mating face of plug is shown, receptacle is mirror image.
Notes: 2. PCB mounting hole diameters are provided for connectors with
.120 [3.05] diameter mounting holes. For connectors with
.154 [3.91] mounting holes, use PCB mounting hole diameter
.160 ± .003 [4.06 ± 0.08].
Notes: 3. PC layouts illustrated above serve as a guide only; they are not to
be used for actual design or construction of customer equipment.
Consult TE Connectivity customer print for detailed PC board
layout requirements.
8-90
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
.164
[4.16]
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
PCB Layouts
(Power/Coax/Signal)
.125 ± .003
[3.18 ± 0.08]
2 Holes
C
L
.269
2 Plcs.
[6.83]
.140 ± .005
[3.56 ± 0.13]
3 Holes
11C1
C
L
.301
[7.65]
C
L
.926 2 Plcs.
[23.52]
.570 2 Plcs.
[14.48]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.237
[6.02]
.306
[7.77]
5C5
.125 ± .003
[3.18 ± 0.08]
2 Holes
.306
[7.77]
.140 ± .005
[3.56 ± 0.13]
3 Holes
.926 2 Plcs.
[23.52]
.570 2 Plcs.
[14.48]
.218
[5.54]
.326
[8.28]
.163
.140 ± .005 [4.14]
±
0.13
[3.56
]
4 Holes
.271
[6.88]
.032
[0.81]
.140 ± .005
[3.56 ± 0.13]
5 Holes
C
L
.656
[16.66]
2 Plcs.
.162
[4.11]
ØA
Typ.
.140 ± .005
[3.56 ± 0.13]
.056
[1.42]
3C3
.125 ± .003
[3.18 ± 0.08]
2 Holes
C
L
.216
.125 ± .003
[5.49]
[3.18 ± 0.08]
2 Holes
.108 Typ.
[2.74]
.056
[1.42]
.656
[16.66]
2 Plcs.
.381
[9.68]
ØA
Typ.
.056
[1.42]
.056
[1.42]
9C4
C
L
.926 2 Plcs.
[23.52]
.570
[14.48]
.109
2 Plcs.
[2.77]
Typ.
.055
[1.40]
ØA
Typ.
.125 ± .003
[3.18 ± 0.08]
2 Holes
.056
[1.42]
.056
[1.42]
.109
[2.77] Typ.
.140 ± .005
[3.56 ± 0.13]
2 Holes
.926 2 Plcs.
[23.52]
.544 2 Plcs.
[13.82]
.055
[1.40]
13C3
ØA
Typ.
.056
[1.42]
.056
[1.42]
17C2
C
L
.125
[3.18
2 Holes
.218
[5.54]
8
.926
[23.52]
2 Plcs.
.140 ± .005
[3.56 ± 0.13]
Rectangular Pin and Socket Connectors
± .003
± 0.08]
.056
[1.42]
ØA
Typ. .056
[1.42]
.163
[4.14]
.109 Typ.
[2.77]
21C1
Post Diameter
.018 [0.46]
.025 [0.64]
.030 [0.76]
.040 [1.02]
.028
.035
.040
.050
[0.71]
[0.89]
[1.02]
[1.27]
ØA
— .038
— .045
— .050
— .060
[0.96]
[1.14]
[1.27]
[1.52]
Notes: 1. Mating face of plug is shown, receptacle is mirror image.
Notes: 2. PCB mounting hole diameters are provided for connectors with
.120 [3.05] diameter mounting holes. For connectors with
.154 [3.91] mounting holes, use PCB mounting hole diameter
.160 ± .003 [4.06 ± 0.08].
Notes: 3. PC layouts illustrated above serve as a guide only; they are not to
be used for actual design or construction of customer equipment.
Consult TE Connectivity customer print for detailed PC board
layout requirements.
8-91
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
PCB Layouts
(Power/Coax/Signal) (Continued)
C
L
.150
[3.81]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.900 2 Plcs.
[22.86]
.650
[16.51]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.100
[2.54]
1.250
[31.75]
2 Plcs.
.350
[8.89]
.600
[15.24]
.140 ± .005
[3.56 ± 0.13]
8 Holes
.125 ± .003
[3.18 ± 0.08]
2 Holes
C
L
C
L
1.250 2 Plcs.
[31.75]
.343
[8.71] .109
Typ.
[2.77]
ØA
Typ.
.056
[1.42]
.140 ± .005
[3.56 ± 0.13]
4 Holes
.056
[1.42]
.055
[1.40]
ØA
Typ.
.056
[1.42]
.056
[1.42]
21C4
C
L
C
L
1.250 2 Plcs.
[31.75]
.896 2 Plcs.
[22.75]
.618
[15.70]
.140 ± .005
[3.56 ± 0.13]
3 Holes
.056
[1.42]
1.250 2 Plcs.
[31.75]
.618 2 Plcs.
.108
[15.70]
[2.74]
Typ
.893 2 Plcs.
[22.68]
.109 Typ.
[2.77]
.125 ± .003
[3.18 ± 0.08]
2 Holes
17C5
.125 ± .003
[3.18 ± 0.08]
2 Holes
.056
[1.42]
27C2
.055
[1.40]
.140 ± .005
[3.56 ± 0.13]
5 Holes
1.250 2 Plcs.
[31.75]
ØA
Typ.
8C8
.893 2 Plcs.
[22.68]
.618
[15.70]
2 Plcs.
.109 Typ.
[2.77]
.055
[1.40]
.140 ± .005
[3.56 ± 0.13]
2 Holes
.400
[10.16]
C
L
.895 2 Plcs.
[22.73]
.542 2 Plcs.
[13.77]
ØA
Typ.
1.203 2 Plcs.
[30.56]
.271
[6.88]
2 Plcs.
.125 ± .003
[3.18 ± 0.08]
2 Holes
.056
[1.42]
.109
Typ.
[2.77]
.055
[1.40]
.813 2 Plcs.
[20.65]
.140 ± .005
[3.56 ± 0.13]
7 Holes
.056
[1.42]
.109
[2.77]
ØA
Typ.
.109
Typ.
[2.77]
25C3
.056
[1.42]
.112
[2.84]
24C7
.813 2 Plcs.
[20.65]
.542
[13.77]
.125 ± .003
[3.18 ± 0.08]
2 Holes
.140 ± .005
[3.56 ± 0.13]
4 Holes
C
L
1.203 2 Plcs.
[30.56]
.271
[6.88]
.055
[1.40]
.109
[2.77]
Typ.
.112
[2.84]
.109
[2.77]
ØA
Typ.
.056
[1.42]
.112
[2.84]
36C4
Post Diameter
.018 [0.46]
.025 [0.64]
.030 [0.76]
.040 [1.02]
.028
.035
.040
.050
ØA
[0.71] – .038
[0.89] – .045
[1.02] – .050
[1.27] – .060
[0.96]
[1.14]
[1.27]
[1.52]
Notes: 1. Mating face of plug is shown, receptacle is mirror image.
Notes: 2. PCB mounting hole diameters are provided for connectors with
.120 [3.05] diameter mounting holes. For connectors with
.154 [3.91] mounting holes, use PCB mounting hole diameter
.160 ± .003 [4.06 ± 0.08].
Notes: 3. PC layouts illustrated above serve as a guide only; they are not to be
used for actual design or construction of customer equipment. Consult
TE Connectivity customer print for detailed PC board layout requirements.
8-92
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
Accessories
Female Screwlocks for
Metal-Shell Connectors
.188†
[4.78]
C
Style (B). Standard and
Long Female Screwlocks Kit
Material and Finish
Flat Washers
Standard Steel Parts — Cold rolled
steel per ASTM A108, zinc plated per
ASTM B633, Type II, Class SCI
Stainless Steel — Passivated
stainless steel
.188†
[4.78]
Style (A). Female
Screwlocks Kit
.250
[6.35]
C
Technical Documents
Square
Nut
Instruction Sheet — 408-7837
Flat Washers
(See Note 3.)
Metal-Shell or
All-Plastic
Plug or
Receptacle
(Shown for Ref. only.
See Notes 4 & 5.)
Connector
Used with
Hex Nut
M3
(Metric)
Clear Chromate
Yellow Chromate
Clear Chromate
Steel Kit Number
Individual
Bulk
Packed
5205817-1 5205817-2
5748271-1†
—
5205817-3 5205817-4
5207872-1
—
5207872-3
—
4-40
Yellow Chromate
5748271-3
—
—
—
4-40
Yellow Chromate
—
—
212447-1
—
4-40
Yellow Chromate
—
—
—
212452-1
Dim. Thread
C
Size
4-40
Nut Driver, Part Number 811262-1
(Used for assembling female screwlocks
to connector flange)
6
(B)
.090 Thick Panels †
(B)
6
(B)
6
(B)
Connector
Used with
Style
(B)
6
(Special)
.312
7.93
.312
7.93
.312
7.93
.500
12.7
Dimension
C
.312
7.93
.185
4.70
Finish
Yellow Chromate
Stainless Steel
Standard
Long
Kit
Special
—
—
—
—
—
—
—
—
—
—
Thread
Size
Finish
4-40
Yellow Chromate
Clear Chromate
Clear Chromate
Screwlocks
Individual
Bulk Packed
5205818-2
—
5205818-3
—
5748558-3
** 5748558-4
**M2.6**
(Metric)
4-40
***M3***
(Metric)
Clear Chromate
5749765-3
—
Yellow Chromate
5748270-2†
—
Clear Chromate
5747404-3
—
4-40
Clear Chromate
5747877-3
—
8
Rectangular Pin and Socket Connectors
Individual Screwlocks
(Washers and Nuts not included)
Style
Lock Washer
Each part is individually bulk packed for multiple kit orders.
With captivated star washer. No additional hardware included.
†Part Number 5748270-2 and 5748271-1 Dimension .158 [4.01]
***M2.6 is the female thread size. The male thread size is 4-40.
***M3 is the female thread size. The male thread size is 4-40.
Notes: 1. All parts are packaged unassembled.
2. Each female screwlock kit is comprised of two assemblies as illustrated above.
3. One or two flat washers may be required for panel thicknesses less than .060 [1.52]. Female screwlocks
are not recommended for panel thicknesses greater than .060 [1.52].
Notes: 4. Female screwlocks with 2-56 thread size are to be used with cable clamps with mounting flanges. Female
screwlocks with 4-40 and M3 (Metric) thread sizes can be used with all other cable clamps.
Notes: 5. Female screwlocks mate with male screw retainers (page 8-96).
Notes: 6. Series 90 and 109 Connectors without eyelets or floating bushings.
8-93
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
Accessories (Continued)
Male Screw Retainers for
Metal-Shell Connectors
Male Screw
Material and Finish
Male Screw — Steel, zinc plated clear
or yellow chromate
Retaining Clip — .012 [0.31]
stainless steel
Male Screw
A
A
Technical Documents
Instruction Sheet — 408-7837
Metal-Shell
Plug or
Receptacle
(Shown for Ref. only)
.280
[7.11]
Retaining Clip
Male Screw
Finish
Thread Size
4-40
Yellow
Chromate
Clear
Chromate
M3
(Metric)
4-40
.185
[4.70]
.247
[6.27]
Retaining Clip
(745136 Series)
.223
[5.66]
Male Screw Retainer Kit No.
Bulk Packed*
Individual
Dimension
A
.220
5.59
.200
5.08
.225
5.72
.220
5.59
.200
5.08
5205980-1
5205980-3
5745136-1
5745136-2
5207871-1
—
5205980-4
5205980-5
5745136-3
5745136-4
*Each part is individually bulk packed for multiple kit orders.
Notes: 1. All parts are packaged unassembled.
2. Each kit is comprised of two male screws and two retaining clips. Male screw retainers are also furnished
as part of cable clamp kits (pages 8-95 and 8-96).
Notes: 3. Male screw retainers mate with female screwlocks (page 8-95) and with metal-shell board mount connectors featuring 4-40 threaded inserts or female screwlocks.
Notes: 4. Retaining clip must be assembled onto connector flanges with threaded hole toward wire side of connector.
Male Screw Retainer Kits
Stainless Steel Kit
Materials
All Parts — Stainless steel, passivated
per QQ-P-35B.
AMP Part Number 211883-5 or
MIL Part Number M24308/25-6P
Notes:
1. Each kit includes two screws and
two retainers.
2. Retainer is assembled onto
connector flange with threaded
hole toward the wire side of the
connector.
4-40 Male Screw
.000
.250 +– .031
0.00
]
[6.35 +– 0.79
Plug or
Receptacle
.280 ± .020
[7.1 ± 0.51]
Retaining Clip
.280
Max.
[7.11]
8-94
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
Accessories (Continued)
Standard Bushings
(for Connectors with
Straight Posted Contacts,
PC Board Mounted)
4-40 Screws
(Customer Supplied)
4-40 Threads
thru
B
Plug or
Receptacle
Material
Aluminum
Kit Numbers
*Parts are individually bulk packed for
multiple kit orders.
Part No.
5205933-3
5205933-4
443279-2
443279-3
Dust Covers
Standoff
Bushing
A
Dim. A
.435
11.05
.435
11.05
.246
6.25
.246
6.25
Note: Standoff Bushings are used with
a plug or receptacle of PC board
mounted connectors.
Dim. B
.250
6.35
.250
6.35
.190
4.83
.190
4.83
Packaged
2 Per Bag
*Bulked Pack
2 Per Bag
4-40 Screws
(Customer Supplied)
*Bulk Pack
Dust covers for subminiature D
connectors are not manufactured by
TE Connectivity. They may be
purchased from:**
Caplugs
2150 Elmwood Avenue
Buffalo, NY 14207
Phone: (716) 876-9855
Fax:
(716) 874-1680
See Catalog 1307612 for additional
hardware such as cable clamps, strain
reliefs, etc.
PC Board
2. Cable clamp/strain relief hardware
cannot be used with the Power/Coax/
Combination Product shown on pages
8-62 to 8-64 of this catalog.
Notes:
1. There are no cable clamp/strain
relief hardware available for size 6
connectors.
** Caplugs is not an affiliate of TE.
8
EMI/RFI Gaskets
A
Rectangular Pin and Socket Connectors
.400
[10.16]
.400
[10.16]
Material and Finish
.800 ± .010
[20.32 ± 0.25]
Brass, .006 [0.15] thick;
bright tin-lead plated
.120 Dia.
[3.05]
(2 Holes)
B
C±
C [±
.010
0.25]
.010
[0.25]
Ref.
9, 15, 25 and 37 Positions
Shell Size
(No. of
Contact Pos.)
1
(9)
2
(15)
3
(25)
4
(37)
A
Dimensions
B
C
.746
18.95
1.074
27.28
1.614
41.00
2.266
57.56
.984
24.99
1.312
33.32
1.852
47.04
2.500
63.50
1.220
30.99
1.555
39.50
2.100
53.34
2.730
69.34
Gasket
Part No.
747024-3
747025-3
745776-3
745777-3
8-95
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,(Continued)
ULTRA-LITE Connectors (Continued)
Accessories (Continued)
Shielded Cable Clamps
45° Exit
Product Facts
■
Dual cable entry
■
Rugged and durable diecast
construction
■
Available in 9 to 37 way
(shell sizes 1 to 4)
■
Choice of screw cable clamp
or crimped ferrule
■
Blanking plate included for
single cable entry
applications
■
Supplied with jackscrews
for locking with mating
connector
Shell
Size
Material and Finish
Cable Clamp Housing — Zinc alloy,
plated bright nickel
Screws and Cable Clamps — Steel,
zinc plate with supplementary chromate
Dummy Plate — Steel
1
2
Shell
Size
3
4
Dimensions
B
A
1.063
27.00
1.378
35.00
1.299
33.00
1.535
39.00
Dimensions
A
B
1.642
41.70
1.535
39.00
2.291
58.20
1.535
39.00
Max.
Cable
Dia.
4-40 Mounting
Screw
Cable Clamp
Kit No.
.354
9.00
Phillips Head
Hex Head
Phillips Head
Hex Head
Phillips Head
Hex Head
Phillips Head
Hex Head
1534805-1
1534805-2
—
—
1534807-1
1534807-2
—
—
Max.
Cable
Dia.
4-40 Mounting
Screw
Cable Clamp
Kit No.
.433
11.00
Phillips Head
Hex Head
Phillips Head
Hex Head
Phillips Head
Hex Head
Phillips Head
Hex Head
1534809-1
1534809-2
—
—
1534811-1
1534811-2
—
—
.365
9.27
.433
11.00
.430
10.92
.430
10.92
.433
11.00
.430
10.92
Cable Clamp
Kit No. for
Coax Contacts
—
—
1534806-1
1534806-2
—
—
1534808-1
1534808-2
Cable Clamp
Kit No. for
Coax Contacts
—
—
1534810-1
1534810-2
—
—
1534812-1
1534812-2
8-96
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
MIL-DTL-24308
Connectors
Cross(Continued)
Reference
This list is provided for reference only. In the event that a discrepancy exists between this catalog and the respective military QPL, then the QPL shall take precedence.
/1
/2
MILITARY
PART NUMBER
ON CONNECTOR
AMP
PART NUMBER
FOR ORDERING
AMP
PART NUMBER
ON CONNECTOR
(All connectors provided with contacts
unless otherwise specified)
REMARKS
M24308/1-1F
M24308/1-2F
M24308/1-3F
M24308/1-4F
M24308/1-5F
M24308/1-12F
M24308/1-13F
M24308/1-14F
M24308/1-15F
M24308/1-16F
M24308/1-23F
M24308/1-24F
M24308/1-25F
M24308/1-26F
M24308/1-27F
M24308/2-1F
M24308/2-2F
M24308/2-3F
M24308/2-4F
M24308/2-5F
M24308/2-6F
M24308/2-7F
M24308/2-8F
M24308/2-9F
M24308/2-10F
M24308/1-1F
M24308/1-2F
M24308/1-3F
M24308/1-4F
M24308/1-5F
M24308/1-12F
M24308/1-13F
M24308/1-14F
M24308/1-15F
M24308/1-16F
M24308/1-23F
M24308/1-24F
M24308/1-25F
M24308/1-26F
M24308/1-27F
M24308/2-1F
M24308/2-2F
M24308/2-3F
M24308/2-4F
M24308/2-5F
M24308/2-1F
M24308/2-2F
M24308/2-3F
M24308/2-4F
M24308/2-5F
593007-1
593007-2
593007-3
593007-4
593007-5
593008-1
593008-2
593008-3
593008-4
593008-5
593009-1
593009-2
593009-3
593009-4
593009-5
205555-2
205557-2
205559-2
205561-2
205563-2
205555-3
205557-3
205559-3
205561-3
205563-3
593007-1
593007-2
593007-3
593007-4
593007-5
593008-1
593008-2
593008-3
593008-4
593008-5
593009-1
593009-2
593009-3
593009-4
593009-5
205555-2
205557-2
205559-2
205561-2
205563-2
205555-2
205557-2
205559-2
205561-2
205563-2
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
M24308/2-11F
M24308/2-12F
M24308/2-13F
M24308/2-14F
M24308/2-15F
M24308/2-16F
M24308/2-17F
M24308/2-18F
M24308/2-19F
M24308/2-20F
M24308/2-21F
M24308/2-22F
M24308/2-11F
M24308/2-12F
M24308/2-13F
M24308/2-14F
M24308/2-15F
M24308/2-16F
M24308/2-11F
M24308/2-12F
M24308/2-13F
M24308/2-14F
M24308/2-15F
M24308/2-16F
204512-2
204514-2
204516-2
204518-2
204520-2
204522-2
204512-3
204514-3
204516-3
204518-3
204520-3
204522-3
204512-2
204514-2
204516-2
204518-2
204520-2
204522-2
204512-2
204514-2
204516-2
204518-2
204520-2
204522-2
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
M24308/2-23F
M24308/2-24F
M24308/2-25F
M24308/2-26F
M24308/2-27F
M24308/2-28F
M24308/2-29F
M24308/2-30F
M24308/2-31F
M24308/2-32F
M24308/2-33F
M24308/2-281F
M24308/2-282F
M24308/2-283F
M24308/2-284F
M24308/2-285F
M24308/2-286F
M24308/2-287F
M24308/2-288F
M24308/2-289F
M24308/2-290F
M24308/2-291F
M24308/2-23F
M24308/2-24F
M24308/2-25F
M24308/2-26F
M24308/2-27F
M24308/2-28F
M24308/2-29F
M24308/2-30F
M24308/2-31F
M24308/2-32F
M24308/2-33F
M24308/2-1F
M24308/2-2F
M24308/2-3F
M24308/2-4F
M24308/2-5F
M24308/2-11F
M24308/2-12F
M24308/2-13F
M24308/2-14F
M24308/2-15F
M24308/2-16F
205483-2
205433-2
205484-2
205485-2
205432-2
204536-2
204538-2
204540-2
204542-2
204544-2
204546-2
205161-1
205163-1
205165-1
205167-1
205169-1
204500-1
204502-1
204504-1
204506-1
204508-1
204510-1
205483-2
205433-2
205484-2
205485-2
205432-2
204536-2
204538-2
204540-2
204542-2
204544-2
204546-2
205555-2
205557-2
205559-2
205561-2
205563-2
204512-2
204514-2
204516-2
204518-2
204520-2
204522-2
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
8
Rectangular Pin and Socket Connectors
MILITARY
PART NUMBER
FOR ORDERING
Note: The suffix “F” on M24308 part numbers designates cadmium shell plating.
8-97
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
MIL-DTL-24308
Connectors
Cross(Continued)
Reference (Continued)
MILITARY
PART NUMBER
FOR ORDERING
MILITARY
PART NUMBER
ON CONNECTOR
AMP
PART NUMBER
FOR ORDERING
AMP
PART NUMBER
ON CONNECTOR
M24308/2-292F
M24308/2-293F
M24308/2-294F
M24308/2-295F
M24308/2-296F
M24308/2-297F
M24308/2-298F
M24308/2-299F
M24308/2-300F
M24308/2-301F
M24308/2-302F
M24308/2-342F
M24308/2-343F
M24308/2-344F
M24308/2-345F
M24308/2-346F
M24308/2-347F
M24308/2-348F
M24308/2-349F
M24308/2-350F
M24308/2-351F
M24308/2-352F
M24308/2-23F
M24308/2-24F
M24308/2-25F
M24308/2-26F
M24308/2-27F
M24308/2-28F
M24308/2-29F
M24308/2-30F
M24308/2-31F
M24308/2-32F
M24308/2-33F
M24308/2-342F
M24308/2-343F
M24308/2-344F
M24308/2-345F
M24308/2-346F
M24308/2-347F
M24308/2-348F
M24308/2-349F
M24308/2-350F
M24308/2-351F
M24308/2-352F
205416-1
205417-1
205418-1
205419-1
205420-1
204524-1
204526-1
204528-1
204530-1
204532-1
204534-1
211525-2
211526-2
211527-2
211528-2
211529-2
211536-2
211537-2
211538-2
211539-2
211540-2
211541-2
205483-2
205433-2
205484-2
205485-2
205432-2
204536-2
204538-2
204540-2
204542-2
204544-2
204546-2
211525-2
211526-2
211527-2
211528-2
211529-2
211536-2
211537-2
211538-2
211539-2
211540-2
211541-2
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
M24308/2-482F
M24308/2-483F
M24308/2-484F
M24308/2-485F
M24308/2-486F
M24308/2-342F
M24308/2-343F
M24308/2-344F
M24308/2-345F
M24308/2-346F
211525-1
211526-1
211527-1
211528-1
211529-1
211525-2
211526-2
211527-2
211528-2
211529-2
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
M24308/2-487F
M24308/2-488F
M24308/2-489F
M24308/2-490F
M24308/2-491F
M24308/2-492F
M24308/2-347F
M24308/2-348F
M24308/2-349F
M24308/2-350F
M24308/2-351F
M24308/2-352F
211536-1
211537-1
211538-1
211539-1
211540-1
211541-1
211536-2
211537-2
211538-2
211539-2
211540-2
211541-2
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
/3
M24308/3-1F
M24308/3-2F
M24308/3-3F
M24308/3-4F
M24308/3-5F
M24308/3-12F
M24308/3-13F
M24308/3-14F
M24308/3-15F
M24308/3-16F
M24308/3-1F
M24308/3-2F
M24308/3-3F
M24308/3-4F
M24308/3-5F
M24308/3-12F
M24308/3-13F
M24308/3-14F
M24308/3-15F
M24308/3-16F
593002-1
593002-2
593002-3
593002-4
593002-5
593004-1
593004-2
593004-3
593004-4
593004-5
593002-1
593002-2
593002-3
593002-4
593002-5
593004-1
593004-2
593004-3
593004-4
593004-5
/4
M24308/4-1F
M24308/4-2F
M24308/4-3F
M24308/4-4F
M24308/4-5F
M24308/4-6F
M24308/4-7F
M24308/4-8F
M24308/4-9F
M24308/4-10F
M24308/4-11F
M24308/4-12F
M24308/4-13F
M24308/4-14F
M24308/4-15F
M24308/4-16F
M24308/4-1F
M24308/4-2F
M24308/4-3F
M24308/4-4F
M24308/4-5F
M24308/4-1F
M24308/4-2F
M24308/4-3F
M24308/4-4F
M24308/4-5F
M24308/4-11F
M24308/4-12F
M24308/4-13F
M24308/4-14F
M24308/4-15F
M24308/4-16F
205556-2
205558-2
205560-2
205562-2
205564-2
205556-3
205558-3
205560-3
205562-3
205564-3
204513-2
204515-2
204517-2
204519-2
204521-2
204523-2
205556-2
205558-2
205560-2
205562-2
205564-2
205556-2
205558-2
205560-2
205562-2
205564-2
204513-2
204515-2
204517-2
204519-2
204521-2
204523-2
/2
REMARKS
(All connectors provided with contacts
unless otherwise specified)
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
Note: The suffix “F” on M24308 part numbers designates cadmium shell plating.
8-98
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
MIL-DTL-24308
Connectors
Cross(Continued)
Reference (Continued)
/4
/23
MILITARY
PART NUMBER
ON CONNECTOR
AMP
PART NUMBER
FOR ORDERING
AMP
PART NUMBER
ON CONNECTOR
M24308/4-17F
M24308/4-18F
M24308/4-19F
M24308/4-20F
M24308/4-21F
M24308/4-22F
M24308/4-259F
M24308/4-260F
M24308/4-261F
M24308/4-262F
M24308/4-263F
M24308/4-264F
M24308/4-265F
M24308/4-266F
M24308/4-267F
M24308/4-268F
M24308/4-269F
M24308/4-302F
M24308/4-303F
M24308/4-304F
M24308/4-305F
M24308/4-306F
M24308/4-307F
M24308/4-308F
M24308/4-309F
M24308/4-310F
M24308/4-311F
M24308/4-312F
M24308/4-324F
M24308/4-325F
M24308/4-326F
M24308/4-327F
M24308/4-328F
M24308/4-329F
M24308/4-330F
M24308/4-331F
M24308/4-332F
M24308/4-333F
M24308/4-334F
M24308/5-1F
M24308/5-2F
M24308/5-3F
M24308/5-4F
M24308/5-5F
M24308/5-12F
M24308/5-13F
M24308/5-14F
M24308/5-15F
M24308/5-16F
M24308/5-23F
M24308/5-24F
M24308/5-25F
M24308/5-26F
M24308/5-27F
M24308/23-1F
M24308/23-2F
M24308/23-3F
M24308/23-4F
M24308/23-5F
M24308/4-11F
M24308/4-12F
M24308/4-13F
M24308/4-14F
M24308/4-15F
M24308/4-16F
M24308/4-1F
M24308/4-2F
M24308/4-3F
M24308/4-4F
M24308/4-5F
M24308/4-11F
M24308/4-12F
M24308/4-13F
M24308/4-14F
M24308/4-15F
M24308/4-16F
M24308/4-302F
M24308/4-303F
M24308/4-304F
M24308/4-305F
M24308/4-306F
M24308/4-307F
M24308/4-308F
M24308/4-309F
M24308/4-310F
M24308/4-311F
M24308/4-312F
M24308/4-302F
M24308/4-303F
M24308/4-304F
M24308/4-305F
M24308/4-306F
M24308/4-307F
M24308/4-308F
M24308/4-309F
M24308/4-310F
M24308/4-311F
M24308/4-312F
M24308/5-1F
M24308/5-2F
M24308/5-3F
M24308/5-4F
M24308/5-5F
M24308/5-12F
M24308/5-13F
M24308/5-14F
M24308/5-15F
M24308/5-16F
M24308/5-23F
M24308/5-24F
M24308/5-25F
M24308/5-26F
M24308/5-27F
M24308/23-1F
M24308/23-2F
M24308/23-3F
M24308/23-4F
M24308/23-5F
204513-3
204515-3
204517-3
204519-3
204521-3
204523-3
205162-1
205164-1
205166-1
205168-1
205170-1
204501-1
204503-1
204505-1
204507-1
204509-1
204511-1
205486-2
205409-2
205487-2
205488-2
205431-2
204537-2
204539-2
204541-2
204543-2
204545-2
204547-2
205412-1
205408-1
205413-1
205414-1
205415-1
204525-1
204527-1
204529-1
204531-1
204533-1
204535-1
593036-1
593036-2
593036-3
593036-4
593036-5
593037-1
593037-2
593037-3
593037-4
593037-5
593038-1
593038-2
593038-3
593038-4
593038-5
443975-1
443975-2
443975-3
443975-4
443975-5
204513-2
204515-2
204517-2
204519-2
204521-2
204523-2
205556-2
205558-2
205560-2
205562-2
205564-2
204513-2
204515-2
204517-2
204519-2
204521-2
204523-2
205486-2
205409-2
205487-2
205488-2
205431-2
204537-2
204539-2
204541-2
204543-2
204545-2
204547-2
205486-2
205409-2
205487-2
205488-2
205431-2
204537-2
204539-2
204541-2
204543-2
204545-2
204547-2
593036-1
593036-2
593036-3
593036-4
593036-5
593037-1
593037-2
593037-3
593037-4
593037-5
593038-1
593038-2
593038-3
593038-4
593038-5
443975-1
443975-2
443975-3
443975-4
443975-5
REMARKS
(All connectors provided with contacts
unless otherwise specified)
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
WITH TOOL
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
8
Rectangular Pin and Socket Connectors
/5
MILITARY
PART NUMBER
FOR ORDERING
Note: The suffix “F” on M24308 part numbers designates cadmium shell plating.
8-99
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
MIL-DTL-24308
Connectors
Cross(Continued)
Reference (Continued)
/23
/24
MILITARY
PART NUMBER
FOR ORDERING
MILITARY
PART NUMBER
ON CONNECTOR
AMP
PART NUMBER
FOR ORDERING
AMP
PART NUMBER
ON CONNECTOR
M24308/23-7F
M24308/23-8F
M24308/23-9F
M24308/23-10F
M24308/23-11F
M24308/23-13F
M24308/23-14F
M24308/23-15F
M24308/23-16F
M24308/23-17F
M24308/23-19F
M24308/23-20F
M24308/23-21F
M24308/23-22F
M24308/23-23F
M24308/23-25F
M24308/23-26F
M24308/23-27F
M24308/23-28F
M24308/23-29F
M24308/23-31F
M24308/23-32F
M24308/23-33F
M24308/23-34F
M24308/23-35F
M24308/23-37F
M24308/23-38F
M24308/23-39F
M24308/23-40F
M24308/23-41F
M24308/23-43F
M24308/23-44F
M24308/23-45F
M24308/23-46F
M24308/23-47F
M24308/23-49F
M24308/23-50F
M24308/23-51F
M24308/23-52F
M24308/23-53F
M24308/23-55F
M24308/23-56F
M24308/23-57F
M24308/23-58F
M24308/23-59F
M24308/24-1F
M24308/24-2F
M24308/24-3F
M24308/24-4F
M24308/24-5F
M24308/24-7F
M24308/24-8F
M24308/24-9F
M24308/24-10F
M24308/24-11F
M24308/24-13F
M24308/24-14F
M24308/24-15F
M24308/24-16F
M24308/24-17F
M24308/23-7F
M24308/23-8F
M24308/23-9F
M24308/23-10F
M24308/23-11F
M24308/23-13F
M24308/23-14F
M24308/23-15F
M24308/23-16F
M24308/23-17F
M24308/23-19F
M24308/23-20F
M24308/23-21F
M24308/23-22F
M24308/23-23F
M24308/23-25F
M24308/23-26F
M24308/23-27F
M24308/23-28F
M24308/23-29F
M24308/23-31F
M24308/23-32F
M24308/23-33F
M24308/23-34F
M24308/23-35F
M24308/23-37F
M24308/23-38F
M24308/23-39F
M24308/23-40F
M24308/23-41F
M24308/23-43F
M24308/23-44F
M24308/23-45F
M24308/23-46F
M24308/23-47F
M24308/23-49F
M24308/23-50F
M24308/23-51F
M24308/23-52F
M24308/23-53F
M24308/23-55F
M24308/23-56F
M24308/23-57F
M24308/23-58F
M24308/23-59F
M24308/24-1F
M24308/24-2F
M24308/24-3F
M24308/24-4F
M24308/24-5F
M24308/24-7F
M24308/24-8F
M24308/24-9F
M24308/24-10F
M24308/24-11F
M24308/24-13F
M24308/24-14F
M24308/24-15F
M24308/24-16F
M24308/24-17F
443976-1
443976-2
443976-3
443976-4
443976-5
443977-1
443977-2
443977-3
443977-4
443977-5
443978-1
443978-2
443978-3
443978-4
443978-5
1218434-1
1218434-2
1218434-3
1218434-4
1218434-5
1218408-1
1218408-2
1218408-3
1218408-4
1218408-5
1218435-1
1218435-2
1218435-3
1218435-4
1218435-5
1218436-1
1218436-2
1218436-3
1218436-4
1218436-5
1218437-1
1218437-2
1218437-3
1218437-4
1218437-5
1218438-1
1218438-2
1218438-3
1218438-4
1218438-5
1218124-1
1218124-2
1218124-3
1218124-4
1218124-5
1218125-1
1218125-2
1218125-3
1218125-4
1218125-5
1218126-1
1218126-2
1218126-3
1218126-4
1218126-5
443976-1
443976-2
443976-3
443976-4
443976-5
443977-1
443977-2
443977-3
443977-4
443977-5
443978-1
443978-2
443978-3
443978-4
443978-5
1218434-1
1218434-2
1218434-3
1218434-4
1218434-5
1218408-1
1218408-2
1218408-3
1218408-4
1218408-5
1218435-1
1218435-2
1218435-3
1218435-4
1218435-5
1218436-1
1218436-2
1218436-3
1218436-4
1218436-5
1218437-1
1218437-2
1218437-3
1218437-4
1218437-5
1218438-1
1218438-2
1218438-3
1218438-4
1218438-5
1218124-1
1218124-2
1218124-3
1218124-4
1218124-5
1218125-1
1218125-2
1218125-3
1218125-4
1218125-5
1218126-1
1218126-2
1218126-3
1218126-4
1218126-5
REMARKS
(All connectors provided with contacts
unless otherwise specified)
8-100
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
MIL-DTL-24308
Connectors
Cross(Continued)
Reference (Continued)
/24
MILITARY
PART NUMBER
ON CONNECTOR
M24308/24-19F
M24308/24-20F
M24308/24-21F
M24308/24-22F
M24308/24-23F
M24308/24-25F
M24308/24-26F
M24308/24-27F
M24308/24-28F
M24308/24-29F
M24308/24-31F
M24308/24-32F
M24308/24-33F
M24308/24-34F
M24308/24-35F
M24308/24-37F
M24308/24-38F
M24308/24-39F
M24308/24-40F
M24308/24-41F
M24308/24-43F
M24308/24-44F
M24308/24-45F
M24308/24-46F
M24308/24-47F
M24308/24-49F
M24308/24-50F
M24308/24-51F
M24308/24-52F
M24308/24-53F
M24308/24-55F
M24308/24-56F
M24308/24-57F
M24308/24-58F
M24308/24-59F
—
—
—
AMP
PART NUMBER
FOR ORDERING
1218127-1
1218127-2
1218127-3
1218127-4
1218127-5
1218440-1
1218440-2
1218440-3
1218440-4
1218440-5
1218441-1
1218441-2
1218441-3
1218441-4
1218441-5
1218442-1
1218442-2
1218442-3
1218442-4
1218442-5
1218443-1
1218443-2
1218443-3
1218443-4
1218443-5
1218444-1
1218444-2
1218444-3
1218444-4
1218444-5
1218445-1
1218445-2
1218445-3
1218445-4
1218445-5
211883-5
212447-1
205817-8
AMP
PART NUMBER
ON CONNECTOR
1218127-1
1218127-2
1218127-3
1218127-4
1218127-5
1218440-1
1218440-2
1218440-3
1218440-4
1218440-5
1218441-1
1218441-2
1218441-3
1218441-4
1218441-5
1218442-1
1218442-2
1218442-3
1218442-4
1218442-5
1218443-1
1218443-2
1218443-3
1218443-4
1218443-5
1218444-1
1218444-2
1218444-3
1218444-4
1218444-5
1218445-1
1218445-2
1218445-3
1218445-4
1218445-5
—
—
—
REMARKS
(All connectors provided with contacts
unless otherwise specified)
Male screw retainer kit
Female screwlock kit
Female screwlock kit
8
Rectangular Pin and Socket Connectors
/25
/26
MILITARY
PART NUMBER
FOR ORDERING
M24308/24-19F
M24308/24-20F
M24308/24-21F
M24308/24-22F
M24308/24-23F
M24308/24-25F
M24308/24-26F
M24308/24-27F
M24308/24-28F
M24308/24-29F
M24308/24-31F
M24308/24-32F
M24308/24-33F
M24308/24-34F
M24308/24-35F
M24308/24-37F
M24308/24-38F
M24308/24-39F
M24308/24-40F
M24308/24-41F
M24308/24-43F
M24308/24-44F
M24308/24-45F
M24308/24-46F
M24308/24-47F
M24308/24-49F
M24308/24-50F
M24308/24-51F
M24308/24-52F
M24308/24-53F
M24308/24-55F
M24308/24-56F
M24308/24-57F
M24308/24-58F
M24308/24-59F
M24308/25-6P
M24308/26-1P
M24308/26-1
Note: The suffix “F” on M24308 part numbers designates cadmium shell plating.
The suffix “P” designates passivated stainless steel.
AMPLIMITE Connectors vs. M39029, M22520 and M81969 Cross Reference
MILITARY
PART NUMBER
FOR ORDERING
M39029/57-354
M39029/58-360
M39029/63-368
M39029/64-369
M22520/2-01
M22520/2-06
M22520/2-08
M22520/2-09
M81969/1-02
M81969/1-04
AMP
PART NUMBER
FOR ORDERING
204351-1
204370-2
205090-1
205089-1
601966-1
601966-4
601966-5
601966-6
91067-2
91067-1
REMARKS
(All connectors provided with contacts
unless otherwise specified)
Size 22 Socket
Size 22 Pin
Size 20 Socket
Size 20 Pin
Crimp Tool
Size 22 Socket Positioner
Size 20 Positioner
Size 22 Pin Positioner
Size 20 Ins/Ext Tool
Size 22 Ins/Ext Tool
8-101
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
NASA Power/Coax/Signal
Connectors (Continued)
Combination Cross Reference
448153-2
448153-3
448154-2
448154-3
211111-2
211111-3
ASSEMBLY
NASA P/N
311-P-4/
05-7P-B-12
05-7P-B-15
05-8P-B-12
05-8P-B-15
05-9P-B-12
05-9P-B-15
PLUG,3C3,NON-MAG,.120 MTG HOLE
PLUG,3C3,NON-MAG,.154 MTG HOLE
PLUG,7C2,NON-MAG,.120 MTG HOLE
PLUG,7C2,NON-MAG,.154 MTG HOLE
PLUG,11C1,NON-MAG,.120 MTG HOLE
PLUG,11C1,NON-MAG,.154 MTG HOLE
212491-6
212491-7
212498-2
212498-3
208810-3
208810-4
05-10P-B-12
05-10P-B-15
05-11P-B-12
05-11P-B-15
05-12P-B-12
05-12P-B-15
PLUG,5C5,NON-MAG,.120 MTG HOLE
PLUG,5C5,NON-MAG,.154 MTG HOLE
PLUG,9C4,NON-MAG,.120 MTG HOLE
PLUG,9C4,NON-MAG,.154 MTG HOLE
PLUG,13C3,NON-MAG,.120 MTG HOLE
PLUG,13C3,NON-MAG,.154 MTG HOLE
212506-2
212506-4
212522-3
212522-4
446405-2
446405-3
05-13P-B-12
05-13P-B-15
05-14P-B-12
05-14P-B-15
05-15P-B-12
05-15P-B-15
PLUG,17C2,NON-MAG,.120 MTG HOLE
PLUG,17C2,NON-MAG,.154 MTG HOLE
PLUG,21C1,NON-MAG,.120 MTG HOLE
PLUG,21C1,NON-MAG,.154 MTG HOLE
PLUG,8C8,NON-MAG,.120 MTG HOLE
PLUG,8C8,NON-MAG,.154 MTG HOLE
212514-3
212514-4
212530-2
212530-3
208742-2
208742-3
05-17P-B-12
05-17P-B-15
05-18P-B-12
05-18P-B-15
05-20P-B-12
05-20P-B-15
PLUG,17C5,NON-MAG,.120 MTG HOLE
PLUG,17C5,NON-MAG,.154 MTG HOLE
PLUG,21C4,NON-MAG,.120 MTG HOLE
PLUG,21C4,NON-MAG,.154 MTG HOLE
PLUG,25C3,NON-MAG,.120 MTG HOLE
PLUG,25C3,NON-MAG,.154 MTG HOLE
212538-2
212538-3
208743-2
208743-6
208744-3
208744-4
05-21P-B-12
05-21P-B-15
05-22P-B-12
05-22P-B-15
05-23P-B-12
05-23P-B-15
PLUG,27C2,NON-MAG,.120 MTG HOLE
PLUG,27C2,NON-MAG,.154 MTG HOLE
PLUG,24C7,NON-MAG,.120 MTG HOLE
PLUG,24C7,NON-MAG,.154 MTG HOLE
PLUG,36C4,NON-MAG,.120 MTG HOLE
PLUG,36C4,NON-MAG,.154 MTG HOLE
445705-2
445705-3
211112-2
211112-3
212059-2
212059-6
05-7S-B-12
05-7S-B-15
05-9S-B-12
05-9S-B-15
05-10S-B-12
05-10S-B-15
RECPT,3C3,NON-MAG,.120 MTG HOLE
RECPT,3C3,NON-MAG,.154 MTG HOLE
RECPT,11C1,NON-MAG,.120 MTG HOLE
RECPT,11C1,NON-MAG,.154 MTG HOLE
RECPT,5C5,NON-MAG,.120 MTG HOLE
RECPT,5C5,NON-MAG,.154 MTG HOLE
212502-2
212502-3
208811-3
208811-4
212510-2
212510-3
05-11S-B-12
05-11S-B-15
05-12S-B-12
05-12S-B-15
05-13S-B-12
05-13S-B-15
RECPT,9C4,NON-MAG,.120 MTG HOLE
RECPT,9C4,NON-MAG,.154 MTG HOLE
RECPT,13C3,NON-MAG,.120 MTG HOLE
RECPT,13C3,NON-MAG,.154 MTG HOLE
RECPT,17C2,NON-MAG,.120 MTG HOLE
RECPT,17C2,NON-MAG,.154 MTG HOLE
212526-3
212526-4
445730-3
445730-4
212518-3
212518-4
05-14S-B-12
05-14S-B-15
05-15S-B-12
05-15S-B-15
05-17S-B-12
05-17S-B-15
RECPT,21C1,NON-MAG,.120 MTG HOLE
RECPT,21C1,NON-MAG,.154 MTG HOLE
RECPT,8C8,NON-MAG,.120 MTG HOLE
RECPT,8C8,NON-MAG,.154 MTG HOLE
RECPT,17C5,NON-MAG,.120 MTG HOLE
RECPT,17C5,NON-MAG,.154 MTG HOLE
212534-2
212534-3
208551-2
208551-3
212542-2
212542-3
05-18S-B-12
05-18S-B-15
05-20S-B-12
05-20S-B-15
05-21S-B-12
05-21S-B-15
RECPT,21C4,NON-MAG,.120 MTG HOLE
RECPT,21C4,NON-MAG,.154 MTG HOLE
RECPT,25C3,NON-MAG,.120 MTG HOLE
RECPT,25C3,NON-MAG,.154 MTG HOLE
RECPT,27C2,NON-MAG,.120 MTG HOLE
RECPT,27C2,NON-MAG,.154 MTG HOLE
208552-2
208552-5
208550-2
208550-3
05-22S-B-12
05-22S-B-15
05-23S-B-12
05-23S-B-15
RECPT,24C7,NON-MAG,.120 MTG HOLE
RECPT,24C7,NON-MAG,.154 MTG HOLE
RECPT,36C4,NON-MAG,.120 MTG HOLE
RECPT,36C4,NON-MAG,.154 MTG HOLE
AMP
PART NUMBER
DESCRIPTION
8-102
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
Rectangular Pin and Socket Connectors
AMPLIMITE Connectors
Connectors,vs.
ULTRA-LITE
NASA Series
Connectors
109 and (Continued)
90 Cross Reference
NASA
PART NUMBER
FOR ORDERING
311P407-1P-B-15
311P407-1P-B-12
311P407-2P-B-15
311P407-2P-B-12
311P407-3P-B-15
311P407-3P-B-12
311P407-4P-B-15
311P407-4P-B-12
311P407-5P-B-15
311P407-5P-B-12
311P407-6P-B-15
311P407-6P-B-12
NASA
PART NUMBER
ON CONNECTOR
311P407-1P-B-15
311P407-1P-B-12
311P407-2P-B-15
311P407-2P-B-12
311P407-3P-B-15
311P407-3P-B-12
311P407-4P-B-15
311P407-4P-B-12
311P407-5P-B-15
311P407-5P-B-12
311P407-6P-B-15
311P407-6P-B-12
AMP
PART NUMBER
FOR ORDERING
206498-1
206498-4
206500-1
206500-4
206063-2
206063-4
206502-1
206502-4
206504-1
206504-4
206066-2
206066-4
AMP
PART NUMBER
ON CONNECTOR
206498-1
206498-4
206500-1
206500-4
206063-2
206063-4
206502-1
206502-4
206504-1
206504-4
206066-2
206066-4
311P407-1S-B-15
311P407-1S-B-12
311P407-2S-B-15
311P407-2S-B-12
311P407-3S-B-15
311P407-3S-B-12
311P407-4S-B-15
311P407-4S-B-12
311P407-5S-B-15
311P407-5S-B-12
311P407-6S-B-15
311P407-6S-B-12
311P407-1S-B-15
311P407-1S-B-12
311P407-2S-B-15
311P407-2S-B-12
311P407-3S-B-15
311P407-3S-B-12
311P407-4S-B-15
311P407-4S-B-12
311P407-5S-B-15
311P407-5S-B-12
311P407-6S-B-15
311P407-6S-B-12
206499-1
206499-4
206501-1
206501-4
206064-2
206064-4
206503-1
206503-4
206505-1
206505-4
206065-2
206065-4
206499-1
206499-4
206501-1
206501-4
206064-2
206064-4
206503-1
206503-4
206505-1
206505-4
206065-2
206065-4
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
311P409-1P-B-15
311P409-1P-B-12
311P409-2P-B-15
311P409-2P-B-12
311P409-3P-B-15
311P409-3P-B-12
311P409-4P-B-15
311P409-4P-B-12
311P409-5P-B-15
311P409-5P-B-12
311P409-1S-B-15
311P409-1P-B-15
311P409-1P-B-12
311P409-2P-B-15
311P409-2P-B-12
311P409-3P-B-15
311P409-3P-B-12
311P409-4P-B-15
311P409-4P-B-12
311P409-5P-B-15
311P409-5P-B-12
311P409-1S-B-15
207252-1
207252-2
206798-1
206798-2
206800-1
206800-2
206802-1
206802-2
206804-1
206804-2
207253-1
207252-1
207252-2
206798-1
206798-2
206800-1
206800-2
206802-1
206802-2
206804-1
206804-2
207253-1
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
311P409-1S-B-12
311P409-2S-B-15
311P409-2S-B-12
311P409-3S-B-15
311P409-3S-B-12
311P409-4S-B-15
311P409-4S-B-12
311P409-5S-B-15
311P409-5S-B-12
311P409-1S-B-12
311P409-2S-B-15
311P409-2S-B-12
311P409-3S-B-15
311P409-3S-B-12
311P409-4S-B-15
311P409-4S-B-12
311P409-5S-B-15
311P409-5S-B-12
207253-2
206799-1
206799-2
206801-1
206801-2
206803-1
206803-2
206805-1
206805-2
207253-2
206799-1
206799-2
206801-1
206801-2
206803-1
206803-2
206805-1
206805-2
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
204370-8
206071-1
205089-4
206793-1
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
LESS CONTACTS
8
Rectangular Pin and Socket Connectors
G-08-P1
G-08-S1
G-10-P1
G-10-S1
REMARKS
(All connectors provided with contacts
unless otherwise specified)
SIZE 22 PIN
SIZE 22 SOCKET
SIZE 20 PIN
SIZE 20 SOCKET
8-103
Catalog 1308940
Revised 9-14
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
工商网监
湘ICP备2023018690号