204M012-19B06

CODE 41 - BRAID TAIL BACKSHELL 204M016-19B08 SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 ENTRY SIZE (TABLE 2) MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-204M012-19B08). 4. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-DTL-38999 SERIES I & II, CLASS E & T, MS27466,MS27467, MS27468, MS27472, MS27473, MS27474, MS27479, MS27480, MS27481, MS27484, MS27497, MS27652, MS27653, MS27654, MS27656 CONNECTORS. DATE DRAWN K.WINCZURA 17/04/2015 CHECKED 17/04/2015 APPROVED K.SHEPPARD 27/04/2015 APPROVED H.SMITH 01/09/2015 REVISIONS LTR DESCRIPTION M REVISED PER ECN AD930 N REVISED PER ECO-15-012000 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 01/09/2015 APPROVED H.SMITH TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES I & II TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 If this document is printed it becomes uncontrolled. Check for the latest revision DRAWING NO: DRAWING REV: SHT 204M0XX N 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 16,80 23,50 25,50 SILICONE O-RING XXXX 152,40 MIN PART MARK HERE TABLE 1 ORDER NUMBER 08 10 12 14 16 18 20 22 24 SHELL SIZE SER 1 / SER 2 09 / 08 11 / 10 13 / 12 15 / 14 17 / 16 19 / 18 21 / 20 23 / 22 25 / 24 TABLE 2 ENTRY SIZE 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 21 22 24 28 DATE DRAWN K.WINCZURA 17/04/2015 CHECKED 17/04/2015 APPROVED K.SHEPPARD 27/04/2015 H.SMITH A THREAD ØK ØY ØZ XXXX TINNED COPPER SHIELD PART MARK HERE APPROVED ØB SILICONE O-RING 152,40 MIN A THREAD ØB SILICONE O-RING 01/09/2015 REVISIONS LTR DESCRIPTION M REVISED PER ECN AD930 N REVISED PER ECO-15-012000 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 01/09/2015 APPROVED H.SMITH A THREAD 7/16-28UNEF 9/16-24UNEF 11/16-24UNEF 13/16-20UNEF 15/16-20UNEF 1 1/16-18UNEF 1 3/16-18UNEF 1 5/16-18UNEF 1 7/16-18UNEF ØK MAX NA NA 21,0 21,0 21,0 24,5 24,5 29,0 32,5 32,5 35,5 35,5 37,0 37,0 40,0 40,0 43,5 48,5 48,5 52,1 58,5 ØZ REF 4,77 6,35 7,92 9,52 11,12 12,70 14,27 15,87 17,47 19,05 20,62 22,23 23,82 25,40 26,98 28,60 31,80 33,34 35,00 38,10 44,45 ØB MAX 18,3 21,5 24,5 27,8 30,8 34,1 37,3 40,5 43,7 MAX ENTRY 04 06 08 10 12 13 15 17 18 ØY REF 13,1 13,1 13,1 17,9 17,9 17,9 17,9 24,2 24,2 24,2 24,2 30,6 30,6 30,6 33,2 33,2 42,0 42,0 42,0 42,0 49,0 TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES I & II TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 If this document is printed it becomes uncontrolled. Check for the latest revision DRAWING NO: DRAWING REV: SHT 204M0XX N 2