2063490-2
Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE
Product Specification (114-), SDE Crimp Die Set
2063490-2
ACTIVE
TE Internal #: 2063490-2
Hand Crimping Tools, Commercial Crimp Tooling, Removable
/Interchangeable, TE Product Specification (114-), SDE Crimp Die
Set
View on TE.com >
Application Tooling > Hand Crimping Tools
Tool Grade: Commercial Crimp Tooling
Die Sets Type: Removable/Interchangeable
Specification Type: TE Product Specification (114-)
TE Certification: Cannot be Certified
Tooling Type: SDE Crimp Die Set
Features
Other
Crimp Form-Wire Barrel Type
Open Barrel - F Crimp
Tool Grade
Commercial Crimp Tooling
Die Sets Type
Removable/Interchangeable
Specification Type
TE Product Specification (114-)
TE Certification
Cannot be Certified
Tooling Type
SDE Crimp Die Set
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU
Out of Scope
EU ELV Directive 2000/53/EC
Out of Scope
China RoHS 2 Directive MIIT Order No 32, 2016
Not reviewed for China RoHS compliance
EU REACH Regulation (EC) No. 1907/2006
Current ECHA Candidate List: JUNE 2023
(235)
Candidate List Declared Against: OCT
2008 (15)
For support call+1 800 522 6752
SVHC > Threshold:
01/02/2024 08:55PM | Page 1
2063490-2
Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE
Product Specification (114-), SDE Crimp Die Set
SVHC > Threshold:
Not Yet Reviewed
Halogen Content
Not Yet Reviewed for halogen content
Solder Process Capability
Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for
substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be
updating its statements accordingly.
Compatible Parts
TE Part # 1-963748-1
TE Part # 2063490-1
TE Part # 2362810-1
TE Part # 1-963749-2
TAB 2.8x0.8 CONTACT CF SWS Sn (LP)
SDE TAB 0.5-2.5mm2 ASSY
SDE CRIMP HAND TOOL FRAME W
TAB TAB 1.0-2.5 MM2 SIPPHBZ
/O DIES
TE Part # 1-963746-1
TE Part # 1-963749-1
TE Part # 1-963745-2
TE Part # 1-963746-2
SPECIAL TERMINAL 17-13 AWG PTPB
LP
TAB TAB 1.0-2.5 MM2 PTPPHBZ
SPECIAL TERMINAL 20-17 AWG SLIPB
LP
SPECIAL TERMINAL 17-13 AWG
SLIPBR LP
For support call+1 800 522 6752
01/02/2024 08:55PM | Page 2
2063490-2
Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE
Product Specification (114-), SDE Crimp Die Set
TE Part # 1-963745-1
TE Part # 1-963745-3
TE Part # 1-963748-3
TE Part # 1-963749-3
SPECIAL TERMINAL 20-17 AWG PTPB
LP
TAB 2,8X0,8
TAB 2.8x0.8 CONTACT CF SWS Au
(LP)
TAB 2.8x0.8 CONTACT CF SWS Au
(LP)
TE Part # 1-963748-2
TAB 2.8x0.8 CONTACT CF SWS Ag
(LP)
Customers Also Bought
TE Part #353718-2
TE Part #1318112-1
TE Part #1-179552-4
TE Part #5-456135-7
DYNAMIC D-3 TAB CONT. 3L AU 0.38
L/P
Contact: Component To Wire；5A, 2818 wire size, gold plated
Receptacle and Tab Housing: 5.08 mm
Pitch, 250-600V
CRIMPER, INSULATION "O"(.062")
TE Part #7-2151099-7
TE Part #1399046-5
OCEAN_2.0_SPARE_PART_KIT080F100OV
MOTOR, SERVO CMP5T MARK ll
Documents
Instruction Sheets
Instruction Sheet (U.S.)
English
For support call+1 800 522 6752
01/02/2024 08:55PM | Page 3
