2063521-1

2063521-1 Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable & Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual 2063521-1  ACTIVE TE Internal #: 2063521-1 Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable & Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual View on TE.com > Application Tooling > Hand Crimping Tools Tool Grade: Commercial Crimp Tooling Ratchet Configuration: Operator Releasable & Adjustable Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Features Other Crimp Form-Wire Barrel Type Open Barrel - F Crimp Tool Grade Commercial Crimp Tooling Ratchet Configuration Operator Releasable & Adjustable Die Sets Type Removable/Interchangeable Specification Type TE Product Specification (114-) TE Certification Cannot be Certified Power Technology Type Manual Tooling Type SDE Crimp Hand Tool Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Out of Scope EU ELV Directive 2000/53/EC Out of Scope China RoHS 2 Directive MIIT Order No 32, 2016 Not reviewed for China RoHS compliance EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JUN 2010 (36) SVHC > Threshold: Not Yet Reviewed  Halogen Content For support call+1 800 522 6752 Not Yet Reviewed for halogen content 01/02/2024 08:55PM | Page 1 2063521-1 Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable & Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual Halogen Content Not Yet Reviewed for halogen content Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts  TE Part # 770247-3 TE Part # 640310-3 TE Part # 640309-3 TE Part # 770003-3 UMNL II SOK PTPPHBZ LP 12-10 UMNL SOK 12-10 PTPPHBZ UMNL PIN 12-10 PTPPHBZ UMNL II PIN PTPPHBZ TE Part # 770004-3 TE Part # 770234-3 TE Part # 1-770004-0 TE Part # 1-770003-0 UMNL II SOK PTPPHBZ UMNL GRND PIN PTPPHBZ UMNL II SOK SN/AUNI/PHBZ UMNL II PIN DUPLX AUSN/NI/PHBZ TE Part # 770004-4 TE Part # 1586065-1 TE Part # 2063521-2 TE Part # 2362810-1 UMNL II SOK SN/AUNI/PHBZ UMNL 10-12 AWG EC SOCKET CONT SDE UMNL 4.0-5.0mm2 DIE SET SDE CRIMP HAND TOOL FRAME W /O DIES For support call+1 800 522 6752 01/02/2024 08:55PM | Page 2 2063521-1 Hand Crimping Tools, Commercial Crimp Tooling, Operator Releasable & Adjustable, Removable/Interchangeable, TE Product Specification (114-), Manual TE Part # 770003-8 UMNL II PIN PHBZ UNPL Customers Also Bought TE Part #206708-1 TE Part #327583 TE Part #1734592-5 TE Part #2110759-1 CPC PLUG ASSEMBLY SIZE 13-9 SPLICE BUTT PIDG 16-14/22-18 0.5mm FPC Connectors PT CONN ASSY 20 POS 16G SFP TE Part #1-104480-5 TE Part #2213771-1 TE Part #8-2176412-8 TE Part #207008-6 SHORT POINT RCP CONT LP AV22 SPM 5A NO LED 5W XSM M/OX 5% 22K CABLE CLAMP KIT, BULK PKG Documents Datasheets & Catalog Pages Bottoming Dies English SDE Crimp Commercial Tool System English Instruction Sheets Instruction Sheet (U.S.) English  For support call+1 800 522 6752 01/02/2024 08:55PM | Page 3