2063625-2

2063625-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE Product Specification (114-), SDE Crimp Die Set 2063625-2  ACTIVE TE Internal #: 2063625-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable /Interchangeable, TE Product Specification (114-), SDE Crimp Die Set View on TE.com > Application Tooling > Hand Crimping Tools Tool Grade: Commercial Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Tooling Type: SDE Crimp Die Set Features Other Crimp Form-Wire Barrel Type Open Barrel - F Crimp Tool Grade Commercial Crimp Tooling Die Sets Type Removable/Interchangeable Specification Type TE Product Specification (114-) TE Certification Cannot be Certified Tooling Type SDE Crimp Die Set Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Out of Scope EU ELV Directive 2000/53/EC Out of Scope China RoHS 2 Directive MIIT Order No 32, 2016 Not reviewed for China RoHS compliance EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUNE 2023 (235) Candidate List Declared Against: JUN 2010 (36)  For support call+1 800 522 6752 SVHC > Threshold: 01/02/2024 08:56PM | Page 1 2063625-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE Product Specification (114-), SDE Crimp Die Set SVHC > Threshold: Not Yet Reviewed Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts TE Part # 2063625-1 TE Part # 2362810-1 TE Part # 1241411-1 TE Part # 1241413-1 SDE MCP6.3 0.2-1.0mm2 ASSY SDE CRIMP HAND TOOL FRAME W /O DIES AMP MCP6.3/4.8K,CONTACT,SWS, (LP) AMP MCP6.3/4.8K,CONTACT,SWS, (LP) TE Part # 964309-1 TE Part # 1241413-3 TAB A 5.8x0.8 CONTACT CF SWS Sn (LP) AMP MCP 6.3/4.8K, CONTACT, SWS, (LP) Customers Also Bought  For support call+1 800 522 6752 01/02/2024 08:56PM | Page 2 2063625-2 Hand Crimping Tools, Commercial Crimp Tooling, Removable/Interchangeable, TE Product Specification (114-), SDE Crimp Die Set TE Part #DTM06-2S-EP10 TE Part #776164-1 TE Part #2112297-1 TE Part #1618002-7 PLG, 2P, BLK, 120 OHM RESISTOR, AU, B 35POS,AMPSEAL,SOC HSG ASSY,SLD, COD 1 PROTECTION CAP,GROUP E,ASSY EV200AAANA=RELAY, EV200 SPST-N TE Part #1670865-1 TE Part #3-1618389-7 TE Part #9-1618389-8 TE Part #3-1414773-5 COVER,90 LEV100A4ANG=RELAY, 12Vdc SPST- LEV100A5ANG=RELAY, SPST, 24Vdc V23145B1101A402-EV-CBOX NO TE Part #AUA035N00420150000 TE Part #AUA035N00580150000 623 PLUG, ANGLED 623 PLUG, ANGLED Documents Datasheets & Catalog Pages Bottoming Dies English SDE Crimp Commercial Tool System English Instruction Sheets Instruction Sheet (U.S.) English  For support call+1 800 522 6752 01/02/2024 08:56PM | Page 3