General Purpose
Low Power PCB Relays
OEG
Miniature PCB Relay OJS 10A/16A
n 1
pole 10/16A, 1 form A (NO)
rating with sensitive coil 200mW
n Small size (18.2 x 10.2 x 14.8mm)
n 4000Vrms coil to contact dielectric strength
n Product in accordance to IEC 62368-1
n 10A
Typical applications
Lihting, smart plug, power supply, appliances, industrial control.
Approvals
Will change to new certification No. TUV R50497672, UL E82292,
CQC21002289617
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A, 1 NO
Rated voltage
250VAC
Max. switching voltage
250VAC
Rated current
10A, 16A
Contact material
AgSnOInO
Min. recommended contact load
100mA at 5VDC
Frequency of operation
360 ops./h
Operate/release time max.
15ms/4ms
Electrical endurance
UL508
HM, 10A, 250VAC, +85°C
50x103 ops.
HE, 16A, 250VAC, +85°C
30x103 ops.
IEC 61810-1
8A, 250VAC res, +23°C
100x103 ops.
Mechanical endurance, DC coil
10x106 ops.
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
5 to 48VDC
2
Class F
Zt
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Type of insulation
750Vrms
4000Vrms
7mm / 11mm
Reinforced insulation
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40°C to +85°C
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight
Shock resistance (functional)
10g
Shock resistance (destructive)
100g
Weight
Approx. 5.8g
Resistance to soldering heat THT
IEC 60068-2-20
RTII: 270°C/10s
RTIII: 260°C/10s
Packaging unit tray/100, Carton box/1000
Coil versions, DC coil, OJS-HM type
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
03 3 2.25 0.15 45 200
05
5
3.75
0.25
125
200
06 6 4.5 0.3 180 200
09
9
6.75
0.45
405
200
12 12 9 0.6 720 200
24 24 18 1.2 2880 200
48 48 36
2.4 11520 200
All figures are given for coil without pre-energization, at ambient temperature +23°C
Coil versions, DC coil, OJS-HE type
Coil
Rated
Operate
Release
Coil
Rated coil
code voltage voltage voltage
resistance power
VDC VDC VDC
Ω±10%
mW
03 3 2.25 0.15 20 450
05 5 3.75 0.25 56 450
06 6 4.5 0.3 80 450
09
9
6.75
0.45
180
450
12 12 9 0.6 320 450
24 24 18 1.2 1280 450
48 48 36 2.4 5120 450
04-2021, Rev. 0421
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
OEG
General Purpose
Low Power PCB Relays
Typical Part Number
OJE
B
-SH
-1
12
L
Miniature PCB Relay OJS 10A/16A (Continued)
M
H
F
OEG
,095
cts.
tacts.
Dimensions
g 1308242
cover.
OEG
PDF Rev.OJS
11-04)
HM 10A Outline and PCB Layout
OJE
-SH
24 = 24VDC
-1
12
L
M
H
F
,095
48 = 48VDC
ontacts**
Contacts
D = Standard (450mW) Coil, 5A Contacts
ption for Sensitive Coil:
with Coil Input/Contact Rating code "L").
F = Class F (155°C)
ure code "SS"
,095 = Standard model for enclosure code "SH"Catalog 1308242
Other Suffix = Custom model
Coil,
es. 5A Contacts
, addOrdering
suffix "H" to Information
the end of the part number as indicated in
OJS HE 16A Outline and PCB Layout
Issued 3-03 (PDF Rev. 11-04)
step 7 of Ordering Information.
Typical Part Number
B
OJE
more likely to stock the following items for immediate delivery.
-SH
-1
12
L
M
H
1. Basic Series:
DM,095
OJ = 4kVOJE-SH-112HM,095
dielectric, coil and contacts. OJE-SH-124LMH,095
DM,095
OJE-SH-105LMH,095
OJE = 3kV dielectric, coil and contacts.
DM,095
OJE-SH-112LMH,095
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
el for enclosure
1 = 1 pole code "SH"
elays
4. Coil Voltage:
Wiring Diagram (Bottom View)
Other Suffix = Custom model
OEG
05 = 5VDC
09 = 9VDC
24 = 24VDC
.58 ±in.02step 7 of Ordering Information.
indicated
06 =
12 = 12VDC
48 = 48VDC
(14.7
± 6VDC
.5)
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts**
D = Standard (450mW) Coil, 5A Contacts
ng items
for immediate
delivery.
H = Standard
(450mW) Coil, 10A Contacts
(Continued)
lay OJ/OJE
OJE-SH-124LMH,095
6. Contact Arrangement:
.157
M ±=.012
1 Form A, SPST-NO
(4.00 ± .3)
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts
(Only available
code "L").
PCBBoard
layoutRating
assignment
.039with Coil Input/Contact
.039
.012Terminal
PC
Layout
(Bottom
(1.0) pins (1.0)
(.3) 8.
Terminal
assignment
Bottom
view
on
solder
pins
Bottom
view
on
solder
Insulation System:
Wiring
Diagram (Bottom View)
Bottom view on solder pins
Leave Blank = Class A (105°C)
View)
F = Class4F– (155°C)
.05 DIA
9. Suffix:.401 ± .02
± .5) model for enclosure code "SS"
,000 = (10.2
Standard
.300 ± .008
(7.62
± .2)
* Not
suitable for immersion cleaning processes.
(1.3)
.067
(1.71)
,095 = Standard model for enclosure code "SH"
Other Suffix = Custom mode
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number
as indicated
.300
± .004 in step 7 of Ordering Information.
(7.6 ± .1)
.067
Our
authorized distributors are more likely to stock the following items for immediate delivery.
(1.71)
2
OJE-SH-124LMH,095
04-2021, Rev. 0421
Datasheets and product
specification
Datasheets and
product data is subject to the
OJ-SH-105HM,095
OJE-SH-105DM,095
OJE-SH-112HM,095
.100
± disclaimer
.004 and all chapters of
www.te.com
according to IEC 61810-1
and to±be.004
used
terms
of the
.500
.1 ± .008
OJE-SH-112DM,095
OJE-SH-105LMH,095
OJ-SH-112LMH,095
(2.54 ± .1)
2013 Tyco Electronics Corporation,
only together with the ‘Definitions’
the ‘Definitions’
section, available at
(12.7 ±section.
.1)
(2.54 ±©.2)
OJE-SH-124DM,095
OJE-SH-112LMH,095
OJ-SH-124LMH,095
a TE Connectivity Ltd. company
http://relays.te.com/definitions
Dimensions
Outline
Dimensions
PC Board Layout (Bottom View)
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Wiring Diagram (Bottom View)
General Purpose
Low Power PCB Relays
OEG
Miniature PCB Relay OJS 10A/16A (Continued)
Product code structure
Typical product code
OJS -SS -1 12 HM F ,00000
Type
OJS Miniature PCB Relay
Category of protection
SS
flux proof
SH
wash tight
Number of poles
1
1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
HM 200mW coil power, 10A type
HE
450mW coil power, 16A type
Insulation system designation
F
Insulation Class F (155°C)
Suffix
,00000 Standard
,XXXXX customized type
Product code
OJS-SH-105HMF, 00000
OJS-SH-112HMF, 00000
OJS-SH-124HMF, 00000
OJS-SS-105HMF, 00000
OJS-SS-112HMF, 00000
OJS-SS-124HMF, 00000
OJS-SH-105HEF, 00000
OJS-SH-112HEF, 00000
OJS-SH-124HEF, 00000
OJS-SS-105HEF, 00000
OJS-SS-112HEF, 00000
OJS-SS-124HEF, 00000
Rating
10A
Enclosure
Wash tight
Coil voltage
Flux proof
Wash tight
16A
Flux proof
5VDC
12VDC
24VDC
5VDC
12VDC
24VDC
5VDC
12VDC
24VDC
5VDC
12VDC
24VDC
Coil power
Insulation
200mW
Class F
450mW
Part number
2071556-8
2071556-7
2071556-9
2071556-6
2071556-4
2071556-5
1-2071556-2
2071556-3
1-2071556-0
1-2071556-1
2071556-1
2071556-2
Other types on request.
This list represents the most common types and does not show all variants covered by this data sheet.
04-2021, Rev. 0421
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3
