2081968-1

4 C 1 REVISIONS 2020 TE Connectivity. All Rights Reserved. ELECTRICAL D 2 3 MECHANICAL IMPEDANCE 50 Ohm FREQUENCY RANGE DC to 6GHz INSERTION LOSS: MAX. 0.05*SQRT(F) dB VSWR: MAX. 1.15@0-3GHz MAX. 1.20@3-6GHz DIELECTRIC WITHSTAND VOLTANGE: MAX.2500 V RMS INSULATION RESISTANCE MIN.5000 Mohms PIM3: MAX.-160dBc @2x20W,900MHz,1800MHz, 2100MHz tested with cable ENVIRONMENTAL MATING CYCLES: MIN. 100 CYCLES RECOMMENDED TORQUE: 5Nm DESCRIPTION LTR DATE DWN APVD TEMPERATURE RANGE: -40°~+85°C D SALT SPRAY: 96H INTERFACE SEAL: IP68(1m,24h) MATED PANEL SEAL: N/A CABLE PULLING: 500N MIN. CABLE TORSION: 5Nm MIN. ( P ) RECOMMENDED CABLE DIMENSION C C NO BURR ALLOWED REF CH0.2 X45 ° B B P/N NOTE: CENTER CONTACT OUTER CONTACT 1. INTERFACE ACCORDING TO IEC 61169-54 2. CENTER CONTACT IS SPARE PART, AND WILL BE PACKAGED SEPARATELY. 2081968-1 INSULATOR O-RING THIS DRAWING IS A CONTROLLED DOCUMENT. TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm A MATERIAL 1470-19 (3/13) PART NAME SEE TABLE - 0 1 2 3 4 PLC PLC PLC PLC PLC ANGLES FINISH 0.3 0.2 0.20 0.100 0.1000 - SEE TABLE - OTHERS DWN 10MAR2020 CHK 10MAR2020 APVD 10MAR2020 JZ RZ RS PRODUCT SPEC 108-115175 APPLICATION SPEC 408-160011 WEIGHT 31g CUSTOMER DRAWING MATERIAL PLATING BRASS SILVER BRASS WHITE BRONZE PTFE SILICONE RUBBER BRASS NICKEL TE Connectivity NAME 4.3-10 STRAIGHT PLUG, SCREW FOR 1/2 FLEX CABLE SOLDER TYPE SIZE CAGE CODE A3 00779 A DRAWING NO 2081968 SCALE 1:1 SHEET RESTRICTED TO - 1 OF 2 REV A 4 C 2 3 1 REVISIONS 2020 TE Connectivity. All Rights Reserved. P DESCRIPTION LTR DATE DWN APVD D D C C B B (BOX SIZE ONLY FOR REFERENCE, UNIT: CM) THIS DRAWING IS A CONTROLLED DOCUMENT. TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: mm A MATERIAL 1470-19 (3/13) SEE TABLE - 0 1 2 3 4 PLC PLC PLC PLC PLC ANGLES FINISH 0.3 0.2 0.20 0.100 0.1000 - SEE TABLE - DWN 10MAR2020 CHK 10MAR2020 APVD 10MAR2020 JZ RZ RS PRODUCT SPEC 108-115175 APPLICATION SPEC 408-160011 WEIGHT 31g CUSTOMER DRAWING TE Connectivity NAME 4.3-10 STRAIGHT PLUG, SCREW FOR 1/2 FLEX CABLE SOLDER TYPE SIZE CAGE CODE A3 00779 A DRAWING NO 2081968 SCALE 1:1 SHEET RESTRICTED TO - 2 OF 2 REV A