Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
One-Piece Sealed Circular Plastic Connectors
Product Facts
n
n
n
n
n
n
n
Economical environmentally
sealed connector designed
for industrial applications
Meets major Industrial
Standards
High strength, impact
resistant thermoplastic
housing, rated UL 94V-0
Contains wire entry and
peripheral seals
AMP POWERBAND precision
formed power contact
(Series 5 and 6)
Type III+ precision formed
signal/low current contacts
(Series 1 and Series 6)
Other configurations in
Series 1 can be made
available, contact your local
Tyco Electronics Sales
Engineer or Tyco Electronics,
Harrisburg, PA
One-Piece Sealed CPC Connectors
The new Sealed One-Piece
Circular Plastic Connectors
are the latest product
innovation to the sealed
CPC product family. This
design allows for easy
assembly. The housing and
the seal are attached. A
newly designed wire entry
seal protects the rear of the
connector and a peripheral
seal protects the connector
interface. Simply crimp the
contact onto a wire and
insert the crimped wire
contact through the seal
and into the housing cavity.
The connector loads the
same as if the seal wasn’t
there. All connector cavities
come in a sealed condition.
No plugs are required if
you do not use a position
cavity. We have the
capability to provide this
product sealing to you in all
the shell sizes. If you don’t
see your particular size
configuration, contact your
local Tyco Electronics
Sales Engineer or call Tyco
Electronics for the latest
information.
Industry Standards
One-Piece Sealed CPC
products meet –
n
IP 67 (Temporary
immersion)
Fluid Protection Against –
diesel fuel, gear and
engine lubricants, gasoline,
anti-freeze, hydraulic fluid,
water, salt sprays, etc.
Performance Characteristics
meets the same
performance characteristics as shown on page 6.
Operating Temperature Range—
-50°C to +125°C [-58˚F to +257˚F]
UL Voltage Rating—
Series 1 600 V (AC or DC)
Series 6 250 V (AC or DC)
.125 POWERBAND Power Contact –
45 amps, single contact
rating at 30°C T-Rise
Type III+ Contacts –
13 amps, single contact
rating at 30°C T-Rise
Flammability Rating—
UL 94V-0 rated
Sealing Capability—
Per IP 67
Housing Material—
High strength, impact
resistant thermoplastic
Fluid Resistance—
Diesel fuel, gear and engine lubricants,
gasoline, anti-freeze, hydraulic fluid,
water
42
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
Circular Connectors for
Commercial Signal and Power Applications
One-Piece Sealed Circular Plastic Connectors, Series 1
Sealed CPC Receptacles,
Special Series 1 with
Pre-Installed, Bonded
Peripheral Seal
n on page 50)
Square Flange Receptacle (Uses Flange Seal Part No. 81665-n
1.705
Max.
[43.31]
.094±.010
[2.39±0.25]
1.125±.025
[28.58±0.64]
.420±.015
[10.67±0.38
.844±.010 Typ.
[21.44±0.25]
1.750±.025
[44.45±0.64]
.844±.010
[21.44±0.25]
.687±.010 Dia.
[17.45±0.25
.844±.010 Typ.
[21.44±0.25]
.844±.010
[21.44±0.25]
Recommended Panel Cutout
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.705 Max.
[43.31]
Free-Hanging Receptacle
.935
Dia. Max.
[23.75]
.420±.015
[10.67±0.38]
Material and Finish
.687±.010 Dia.
17.45±0.25
.817 Max.
[20.75]
Housing—Thermoplastic, UL 94V-0
rated, black
Seal—Elastomer, gray
.094±.010
[2.39±0.25]
Related Product Data
Plug
.975 Dia. Max.
[24.77]
One-Piece Sealed CPC Connectors
Contacts—Pages 16-21
Contact Arrangement—Page 23
Component Dimensions—
Size 11-4 shown; request Customer
Drawings for other sizes
Accessories—Pages 37-41 and
50-53
Performance Characteristics—
Page 6
Application Tooling—Pages 75-78
Technical Documents—Page 79
1.425
Max.
[36.20]
Arrangement
Shell No. of
Size Positions
Sex
Standard
Reverse
13-9
Standard
17-14
Reverse
Standard
17-16
Standard
23-24
Standard
Standard
23-37
1
Four 4-40 threaded inserts per receptacle.
11-4
Square Flange Recptacle
With Mounting
With Threaded
Holes
Inserts1
796095-2
–
788154-2
–
788158-2
–
796272-1
–
796275-3
796275-1
796275-2
–
796190-1
–
–
796286-1
Free-Hanging
Receptacle
Plug
Insulation
Diameter
796096-2
788155-2
788159-2
796273-1
796276-1
796276-2
796291-1
796287-1
796094-2
788153-2
788157-2
796271-1
796274-1
796274-2
796188-1
796288-1
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.065-.100 [1.65-2.54]
.040-.080 [1.01-2.03]
.065-.120 [1.65-3.04]
.065-.100 [1.65-2.54]
Assembly Accessories
Seal Protectors are recommended to aid
contact insertion through the wire entry
seal. They are reusable.
Wire Entry Seal Plug
Part Number 208337-1 (Insert Pins)
Part Number 208338-1 (Insert Sockets)
Part Number 796075-1 (6 per carrier strip)
Material—Polypropylene, natural
.453
[11.5]
43
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
One-Piece Sealed Circular Plastic Connectors, Series 5
CPC Connectors, Series 5
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 50)
1.125±.010
[28.58±0.25]
1.050
[26.67]
Dia.
1.435
[36.45]
1.125±.010
[28.58±0.25]
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.105
[28.07] Dia. Max.
.094
[2.39]
.514
[13.06]
1.435
[36.45]
1.690
[42.93] Max.
1.690
[42.93] Max.
Plug
Material
Housing—Nylon, glass-filled UL rated
94V-0, black
1.349
Max.
[34.26]
Dia.
Related Product Data
Contacts—Page 46
Accessories—Page 50
Application Tooling—Pages 75-78
Technical Documents—Page 79
1.105
[28.07] Dia.
Arrangement
Insulation
Diameter
Square Flange
Receptacle
Free-Hanging
Receptacle
Plug
.095-.205 [2.41-5.21]
.150-.265 [3.81-6.73]
788189-1
788189-2
796112-1
796112-2
788188-1
788188-2
One-Piece Sealed CPC Connectors
Shell
No. of
Size Positions
17-3
CPC Connectors, Series 6
Sealed
One-Piece Sealed Circular Plastic Connectors, Series 6
1.625 Max.
[41.28]
Free-Hanging Receptacle
.520
[13.21]
Square Flange Receptacle
1.625 Max.
[41.28]
.156
[3.96]
.520
[13.21]
1.728 Max.
[43.89]
1.438
[36.53]
.156
[3.96]
1.505
Max.
[38.23]
1.505 Max.
[38.23]
1.438
[36.53]
Listed part numbers are for
connectors only; contacts must
be ordered separately.
1.500 Max.
[38.10]
1.683 Max.
[42.75]
Plug
Material
Housing—Nylon, glass-filled UL rated
94V-0, black
1.750
[44.45] 1.438
[36.53]
1.783 Max.
[45.29]
Related Product Data
Contacts—Pages 16-21 and 46
Application Tooling—Pages 75-78
Technical Documents—Page 79
Arrangement
Shell No. of
Size Positions
23-16
Insulation Diameter
Power
Signal
.095-.205
[2.41-5.21]
.065-.100
[1.65-2.54]
Sex
Square Flange
Receptacle
w/Mounting Holes
Free-Hanging
Receptacle
Plug
Standard
Reverse
796466-1
—
796207-1
796330-1
796203-1
796332-1
44
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors
Product Facts
n
n
n
n
n
n
n
Economical environmentally
sealed connector designed
for industrial applications
Meets major Industrial
Standards
High strength, impact
resistant thermoplastic
housing, rated UL 94V-0
Contains wire entry,
peripheral, and full
interfacial seals
AMP POWERBAND precision
formed power contact
(Series 5 and 6)
Type III+ precision formed
signal/low current contacts
(Series 6)
Other configurations in
Series 1 can be made
available, contact your local
Tyco Electronics Sales
Engineer or Tyco Electronics,
Harrisburg, PA
Technical Documents
(power/signal mix) sealed
connector configurations.
Other sizes are available in
a Series 1 (signal/low
current) configuration.
Contact your local Tyco
Electronics Sales Engineer,
or call Tyco Electronics for
the latest design
information.
Sealed CPC connectors
are designed to meet the
requirements of UL, CSA,
and VDE for
environmentally sealed
connectors used in
industrial applications.
Industry Standards
Two-Piece Sealed CPC
connectors meet—
n IP65
In addition, sealed CPC
connectors are designed
to meet the latest SAE and
ASAE requirements as
outlined in the standards
listed here.
Performance Characteristics
Operating Temperature Range—
-50°C to +125°C [-58˚F to +257˚F]
UL Voltage Rating—
Series 5 600 V (AC or DC)
Series 6 250 V (AC or DC)
.125 POWERBAND Power Contact –
45 amps, single contact
rating at 30°C T-Rise
Type III+ Contacts –
13 amps, single contact
rating at 30°C T-Rise
Flammability Rating—
UL 94V-0 rated
Sealing Capability—
Per IP 65
Housing Material—
High strength, impact
resistant thermoplastic
Fluid Resistance—
Diesel fuel, gear and engine lubricants,
gasoline, anti-freeze, hydraulic fluid,
water
Two-Piece Sealed CPC Connectors
Instruction Sheet
408-4317 Two-Piece Sealed CPC
Connectors
Product Specification
108-1579 Sealed CPC Connectors
with Removable Contacts
Sealed CPC connectors are
the latest additions to the
growing family of AMP
Circular Plastic Connectors.
Sealed CPC connectors
were developed as part of
the Series 5 and 6 product
line, specifically to meet the
increasing demand for an
economical environmentally
sealed connector.
Sealed CPC connectors
incorporated the latest
technology in thermoplastic
design and use the new
AMP POWERBAND
precision formed high
current contact.
Illustrated above are the
Series 5 (power) and Series 6
45
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Note: All part numbers
are RoHS Compliant.
Circular Connectors for
Commercial Signal and Power Applications
Sealed Circular Plastic Connectors
Multimate Size 16 Contacts
Precision formed signal/low current
Pin Diameter—.062 [1.57]
Test Current—13 amps max.
.125 POWERBAND Contacts
Precision formed high current
Pin Diameter—.125 [3.175]
Test Current—50 amps max.
Type III+
Precision Formed Contacts
Extraction Tool
Part Number 318813-1
Type II
Screw-Machined Contacts
See pages 16-22 for complete product information and part numbers of Size 16
contacts applicable in Sealed CPC Connectors.
(Instruction Sheet 408-4374)
.125
[3.18]
Dia.
.206
Dia.
[5.23]
Material and Finish
Serrations
Contacts—Copper with beryllium
copper spring
Sealed CPC Connectors
Plating Code
A — Post plated .000200 [0.00508]
min. silver in mating area with .000050
[0.00127] min. silver on remainder of
contact, all over .000050 [0.00127] min.
nickel
B — Post plated .000030 [0.00076]
min. gold in mating area with gold flash
on remainder of contact, all over
.000050 [0.00127] min. nickel
Contact
Strip
Extended1
.485
[12.32]
.206
[5.23]
Dia.
Standard
.400
[10.16]
Related Product Data
Application Tooling—Pages 75-78
Technical Documents—Page 79
.125 POWERBAND
Pin Contact
.125 POWERBAND
Socket Contact
Contact Part No.
Wire Size
AWG /mm2
14-12
2-3
10-8
5-8
Contact
Finish
A
B
A
B
A
B
A
B
Pin
Length
Standard
Standard
Extended1
Extended1
Standard
Standard
Extended1
Extended1
Strip
Loose Piece
Pin
Socket
Pin
Socket
213845-1
213845-2
213845-5
213845-6
213841-1
213841-2
213841-5
213841-6
213847-1
213847-2
—
—
213843-1
213843-2
—
—
213845-3
213845-4
213845-7
213845-8
213841-3
213841-4
213841-7
213841-8
213847-3
213847-4
—
—
213843-3
213843-4
—
—
Tooling Part No.
Heavy Duty Miniature (HDM)
Die Sets for
Applicators (for AMP-O-LECTRIC Hand Tool 69710-1
Model G Machine,
or 626 Pneumatic Tool
Base Part No. 354500)
System*
680195-3
356612-1
680197-3
356611-2 (10 AWG)
356611-1 (8 AWG)
1
For use in One-Piece or Two-Piece Sealed Circular Plastic Connectors (CPC), Series 5 and 6.
‡Single contact, free-air test current; not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information, page 8.
Note: Standard Size 8, High Current Upgrade Size 8, and .125 POWERBAND contacts are not intermateable.
*A typical 626 Pneumatic Tool System requires: a power unit (Part No. 189721-2, hand actuated or 189722-2, foot actuated), an adapter
holder (Part No. 356304-1, with ratchet), and “C” Head adapter Part No. 318161-1.
Specifically designed for
AMP CPC Connectors,
Series 5 and 6, the new
.125 POWERBAND contact
offers the performance of a
MIL-Spec screw machined
Size 8 contact with the
economy of a stamped
and formed, strip-feed
contact. Strip-feed contacts
offer maximum production
capabilities using standard
AMP bench-mount, semiautomatic termination
equipment. For low volume,
prototype or maintenance
and repair requirements,
the .125 POWERBAND
contact is available in loose
piece form.
46
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Series 5
CPC Connectors, Series 5
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 50)
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
.420
[10.67]
.280±.010
[7.11±0.25]
1.050
[26.67]
Dia.
1.090±0.15
[27.69±0.38]
Dia.
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
Listed part numbers are for
connectors only; contacts must
be ordered separately.
.094
[2.39]
1.675±.013
[42.54±0.33]
Typ.
.065±.003
[1.65±0.08]
Typ.
Free-Hanging Receptacle
1.146±.010
[29.11±0.25]
Material
.420
[10.67]
Housing—Nylon, glass-filled UL rated
94V-0, black
Related Product Data
Contacts—Pages 46
Accessories—Page 50
Application Tooling—Pages 75-78
Technical Documents—Page 79
.280±.010
[7.11±0.25]
1.090±.015
[27.69±0.38]
Dia.
1.050
[26.67]
Dia.
1.295±.010
[32.89±0.25]
Dia.
.094
[2.39]
1.675±.013
[42.54±0.33]
Typ.
.065±.003
[1.65±0.08]
Typ.
Two-Piece Sealed CPC Connectors
Plug (With Full Interfacial Seal)
Replacement Coupling Ring
Shell Size
17-3
1.349
Max.
[34.26]
Dia.
Part No.
213810-1
.995
[25.27]
.280±.010
[7.11±0.25]
1.609±.015
[40.87±0.38]
Reverse Sex (Receptacles accept socket contacts, Plugs accept pin contacts)
Square Flange
Receptacle
213889-2
17-3 - Connector
213899-1
17-3 - Wire Entry Seal Kit
Kit includes (1) Silicon Wire Entry Seal and (1) Pressure Plate.
*Wire entry seals require cable clamp kits.
Arrangement
Free-Hanging
Receptacle
213890-2
213899-1
Plug
213905-1
213899-1
Wire Entry Seals*
*Cable clamp kit 213902-3
required. (Similar to 206322-9.
See page 37 for dimensional detail
of cable clamp) or cable clamp kit
213904-3. (Similar to 206070-8.
See page 37 for dimensional detail
of cable clamp).
.880
[22.35]
Dia.
.325 When
[8.26] Flush
Rear View
Receptacles
Rear View
Plugs
Side View
Plugs/Receptacles
Note: Minimum insulation diameter is .156 [3.96]; Maximum insulation diameter is .260 [6.60].
47
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Series 6
CPC Connectors, Series 6
Sealed – Reverse Sex
Square Flange Receptacle (Uses Flange Seal Part No. 81665-2 on page 50)
1.435±.015
[36.45±0.38]
1.125±.010
[28.58±0.25]
Typ.
.280
[7.11]
.420
[10.67]
1.435±.015
[36.45±0.38]
1.090
Dia.
[27.69]
1.125±.010
[28.58±0.25]
Typ.
Listed part numbers are for
connectors only; contacts must
be ordered separately.
.065
[1.65]
.094
[2.39]
1.675±.013
[42.55±0.33]
Free-Hanging Receptacle
1.146±.010
[29.11±0.25]
Housing—Nylon, glass-filled UL rated
94V-0, black
.094
[2.39]
.420
[10.67]
Material
1.295±.010
[32.89±0.25]
Dia.
1.090±.015
[27.69±0.38]
Dia.
Related Product Data
Contacts—Pages 16-20 and 46
Accessories—Page 50
Application Tooling—Pages 75-78
Technical Documents—Page 79
.065±.003
[1.65±0.08]
Typ.
Plug
Two-Piece Sealed CPC Connectors
.280±.010
[7.11±0.25]
1.675±.013
[42.55±0.33]
.995
[25.27]
1.349 Max.
[34.26] Dia.
.280±.010
[7.11±0.25]
Replacement Coupling Ring
Shell Size
17-10
Part No.
213810-1
1.609±.015
[40.87±0.38]
Reverse Sex (Receptacles accept socket contacts, Plugs accept pin contacts)
Arrangement
17-10 Connector
17-10 Wire Entry Seal Kit
Square Flange
Receptacle
213893-2
213900-1
Free-Hanging
Receptacle
213894-2
213900-1
Plug
213906-1
213900-1
Kit includes (1) Silicon Wire Entry Seal and (1) Pressure Plate.
*Wire entry seals require cable clamp kits.
Wire Entry Seal*
*Cable clamp kit 213902-3
required. (Similar to 206322-9.
See page 37 for dimensional detail
of cable clamp) or cable clamp kit
213904-3. (Similar to 206070-8.
See page 37 for dimensional detail
of cable clamp).
.880
Dia.
[22.35]
.325 When
[8.26] Flush
Rear View
Receptacles
Rear View
Plugs
Side View
Plugs/Receptacles
Note: Minimum insulation diameter is .156 [3.96]; maximum insulation diameter is .260 [6.60] for power contacts.
Minimum insulation diameter is .060 [1.50]; maximum insulation diameter is .130 [3.30] for signal contacts.
48
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Sealed Circular Plastic Connectors, Special Series 1
Sealed CPC Receptacles,
Special Series 1 with
Pre-Installed, Bonded
Peripheral Seal
Square Flange Receptacle (Uses Flange Seal Part No. 81665- n on page 50)
E
4 Plc.
B
A
Recommended Panel Cutout
Free-Hanging Receptacle
Listed part numbers are for
connectors only; contacts must
be ordered separately.
D
Material and Finish
Housing—Thermoplastic, UL 94V-0
rated, black
Seal—Elastomer, gray
C
Shell
Size
Related Product Data
11
Shell No. of
Size Positions
11-4
13-7
13-9
17-16
17-14
23-24
23-37
13
17
23
Dimensions
A
B
1.125
28.58
1.281
32.54
.607
15.42
.812
20.62
1.435
36.45
1.050
26.67
1.750
44.45
1.438
36.53
Sex
Series I Receptacles with Peripheral Seal
Dimensions
Square Flange Part No.
With Mounting
With Threaded
C
D
Holes
Free-Hanging
Part No.
Two-Piece Sealed CPC Connectors
Contacts—Pages 16-20
Contact Arrangement—Page 23
Accessories—Pages 37-41 and 50
Performance Characteristics—
Page 6
Application Tooling—Pages 75-78
Technical Documents—Page 79
Arrangement
Dimension
E
.844
21.44
.969
24.61
1.125
28.58
1.438
36.53
Mates with
Plug Part No.
Inserts1
Std.
Rev.
Std.
Std.
Std.
Rev.
206061-2
206430-3
211401-3
206705-3
206036-4
206043-4
–
–
–
208131-2
–
–
.935
23.75
1.072
27.23
.817
20.75
.874
22.20
1.310
33.27
1.161
29.49
Std.
Std.
Rev.
206838-3
206151-3
206306-3
–
–
–
1.733
44.02
1.505
38.23
206153-2
206430-4
–
206705-4
206036-5
206043-5
206060-1
206429-1
211399-1
206708-1
206037-1
206044-1
206838-4
206151-4
206306-4
206837-1
206150-1
206305-1
Four 4-40 threaded inserts per receptacle.
1
Notes: 1. For detailed performance data on peripheral seals, refer to Product Specification No. 108-10024.
2. Receptacles mate with Series 1 plugs found on page 10.
Seal shown outside of
connector for illustration
purposes only.
Receptacles with pre-installed, bonded peripheral seals are recommended for use in
sealing/splash-proof applications, or where connectors will be subjected to vibration.
49
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.
Two-Piece Circular Plastic Connector Sealing Accessories
Wire Entry Seal Kits
for Plug and Receptacle
Housings
±.010
A [±0.254]
Dia.
Material and Finish
.075
[1.94]
Seal—Silicon, black
Pressure Plate—Nylon, black
.250±.010
[6.35±0.25]
Dia.
Pressure
Plate
Seal
Sealed CPC Connectors
Arrangement Insulation
Dia. Range
No.
.075-.125
13-9
1.91-3.18
.178-.265
17-3
4.52-6.73
.178-.265
4.52-6.73
17-10
.075-.125
1.91-3.18
.075-.125
17-14
1.91-3.16
.075-.125
17-16
1.91-3.16
Dimension
A
.681
17.30
.790
20.07
Kit for
Pins
Kit for
Sockets
213926-1
213925-1
213899-1
213899-1
.790
20.07
213900-1
213900-1
.790
20.07
.790
20.07
.
213919-2
213919-1
213920-2
213920-1
Notes: 1. Kits include one Gang Seal and one Pressure Plate marked for cavity
identification.
Notes: 2. Arrangement No. 17-10 Insulation Dia. Range .176-.265 [4.52-6.73] for
two holes, .075-125 [1.95-3.18] for eight holes.
One-Piece or Two-Piece Sealed CPC Sealing Accessories
1.500
[38.1]
1.125
[28.58]
Flange Seals
Shell Size
11
13
17 (shown)
23
Material Neoprene, black
Related Product Data
Part No.
81665-3
81665-4
81665-2
81665-5
1.500
[38.1]
1.125
[28.58]
Dimensions—Shell Size 17 shown;
request Customer Drawings for other
sizes
50
Catalog 82021
Revised 7-06
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
