208M710-19C04

CODE 40 - BRAID TAIL BACKSHELL 208M716-19B08 SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 2 ENTRY SIZE (TABLE 2) NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-208M712-19B08). 4. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. DRAWN K.WINCZURA DATE CHECKED 18/02/2015 APPROVED K.SHEPPARD 24/02/2015 APPROVED LTR P R H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 18/02/2015 05/10/2015 REVISIONS DESCRIPTION REVISED PER ECO-15-003576 REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 06.03.15 05.10.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 208M7XX R 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 4 16,80 `0,50 DATE APPROVED K.SHEPPARD 24/02/2015 APPROVED LTR P R H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 18/02/2015 05/10/2015 REVISIONS DESCRIPTION REVISED PER ECO-15-003576 REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1° DATE 06.03.15 05.10.15 TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 APPROVED I.MYONG H.SMITH ØY TINNED COPPER SHIELD PART MARK HERE SHELL SIZE COML / MIL 9/A 11 / B 13 / C 15 / D 17 / E 19 / F 21 / G 23 / H 25 / J TABLE 2 ENTRY SIZE 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 21 22 24 28 18/02/2015 ØZ XXXX TABLE 1 ORDER NUMBER 08 10 12 14 16 18 20 22 24 CHECKED A THREAD ØB TINNED COPPER SHIELD PART MARK HERE DRAWN K.WINCZURA 152,40 MIN SILICONE O-RING SILICONE O-RING ØK ØZ XXXX ØB A THREAD 152,40 MIN ØY 23,50 SILICONE O-RING 23,50 A THREAD M12x1.0 M15x1.0 M18x1.0 M22x1.0 M25x1.0 M28x1.0 M31x1.0 M34x1.0 M37x1.0 ØK MAX NA NA 21,0 21,0 21,0 24,5 24,5 29,0 32,5 32,5 35,5 35,5 37,0 37,0 40,0 40,0 43,5 48,5 48,5 52,1 58,5 ØZ REF 4,77 6,35 7,92 9,52 11,12 12,70 14,27 15,87 17,47 19,05 20,62 22,23 23,82 25,40 26,98 28,60 31,80 33,34 35,00 38,10 44,45 ØB MAX 18,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 MAX ENTRY 4 04 07 09 10 12 14 16 18 20 ØY REF 13,1 13,1 13,1 17,9 17,9 17,9 17,9 24,2 24,2 24,2 24,2 30,6 30,6 30,6 33,2 33,2 42,0 42,0 42,0 42,0 49,0 TITLE: BRAID TAIL BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 208M7XX R 2