209M414-19B20

CODE 40 - LOW PROFILE HEAT SHRINK BOOT BACKSHELL 209M312-19B SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANETLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-209M312-19B). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION. 5. BACKSHELL MATES TO MIL-C-38999 SERIES III & IV, CLASS C, F, K AND W, D38999/20, /24, /26, /40, /46, /47 CONNECTORS AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PAR. 3.5.7. DRAWN W.RUST DATE CHECKED 14/09/2015 APPROVED K.SHEPPARD 09/10/2015 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 14/09/2015 14/10/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-003649 G REVISED PER ECO-15-013980 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 03/06/15 APPROVED I.MYONG 14/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: LOW PROFILE HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 209M3XX G 1 MEDIUM DIAMOND KNURL A-A 16,20 10,50 A 3,50 Z XXXX Y X 0,10 A THREAD C B SILICONE O-RING A PART MARK HERE TABLE 1 BASE PART NUMBER 209M308 209M310 209M312 209M314 209M316 209M318 209M320 209M322 209M324 DRAWN W.RUST DATE 14/09/2015 APPROVED K.SHEPPARD 09/10/2015 H.SMITH 14/10/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-003649 G REVISED PER ECO-15-013980 A THREAD B MAX C MAX X MIN Y +0/-0,40 Z 0,15 M12 x 1.0 M15 x 1.0 M18 x 1.0 M22 x 1.0 M25 x 1.0 M28 x 1.0 M31 x 1.0 M34 x 1.0 M37 x 1.0 19,1 22,3 25,4 30,3 33,3 36,5 38,1 41,3 44,5 15,0 18,0 21,0 25,0 28,0 31,0 34,0 37,0 40,0 1,1 1,1 1,1 1,1 1,1 1,1 1,7 1,7 1,7 17,5 20,7 23,9 28,7 33,0 35,0 36,5 39,8 43,0 6,8 10,3 13,1 16,3 19,5 21,9 25,1 28,3 31,5 3RD ANGLE PROJECTION NOT TO SCALE 14/09/2015 CHECKED APPROVED SHELL SIZE COM'L / MIL 5 9/A 11 / B 13 / C 15 / D 17 / E 19 / F 21 / G 23 / H 25 / J UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 03/06/15 APPROVED I.MYONG 14/10/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: LOW PROFILE HEAT SHRINK BOOT BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT 209M3XX G 2