CeeLok FAS-T CONNECTORS
10 GB/S ETHERNET CONNECTIVITY . . . COMPACT . . . RUGGED . . .
RELIABLE
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
CeeLok FAS-T Connectors
10 Gb/s ethernet connectivity . . . compact . . . rugged . . . reliable
CeeLok FAS-T connectors offer a small form factor,
field terminable I/O connector capable of 10
Gb/s Ethernet. Crimp-snap contacts enable easy
termination and field repairability. The integral
backshell offers easy 360-degree shield termination.
The compact size 8 shell helps designers meet the
needs of reduced SWaP (size, weight, and power).
HIGH SPEED
• Gigabit or 10 Gigabit rates
• Compatible with Cat 5e, Cat 6a or
Cat 7 cables
• T-shaped pin pattern improves
signal integrity through uniform
crosstalk cancellation
The connector’s T-shaped contact pattern provides
noise cancellation and decoupling to minimize
crosstalk and increase signal integrity.
The CeeLok FAS-T connector is a true 100-ohm
impedance connector that is compatible with Cat 5e
and Cat 6a cables and protocols ranging from the
USB and IEEE 1394 to gigabit and 10G Ethernet.
SPACE AND WEIGHT SAVINGS
• Compact size 8 shell
EASY TERMINATION AND
FIELD REPAIRABILITY
• Crimp-snap, 39029-style contacts
FLEXIBLE BACKSHELL/
SHIELDING OPTIONS
•B
ackshell integrated in plug body
provides low profile, low cost,
low weight strain relief and
EMI protection
• Compatible with multiple braid
termination techniques, adapter
styles and seal boots
RUGGED
•S
coop-proof design
• Insert assembly mechanically
retained for ≤25 lb. retention force
• Robust coupling ring mechanism
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 2
CeeLok FAS-T Connectors
Performance Characteristics
DATA RATES
ENVIRONMENTAL PROPERTIES
• Gigabit and 10 Gigabit Ethernet when used with Cat 5e,
Cat 6a or Cat 7 cables
•O
perating Temperature: -65°C to +175°C
•S
ealing: Altitude immersion: 70,000 ft.
(mated condition)
• IP67: Mated condition
• IPX6 (water jet): Receptacle, panel mounted
(unmated condition)
• Corrosion Resistance: 500 hr. salt mist
ELECTRICAL
• Insulation Resistance: 5000 MΩ ambient,
1000 MΩ @ 175°C
•D
ielectric Withstanding Voltage:
500 VAC @ sea level
100 VAC @ 70,000 ft.
• Shielding Effectiveness: per MIL-DTL-38999
• Shell-to-Shell Conductivity: 5 mV initial, 10 mV final
MECHANICAL
• Vibration, Sine: MIL-DTL-38999 Series III (60 g),
4 hrs per axis, no elevated temperature
• Vibration, Random: EIA-364-28
Condition VI Letter J (43.92 g)
• Durability: 500 mating cycles
• Contact Retention: 10 lb. min.
• Coupling Torque: 8 in-lb. max.
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
MATERIALS
• Shell: Electroless nickel for DOD-approved, RoHScompliance, corrosion resistance (500 hr salt mist)
• Insert: High-temperature thermoplastic for excellent
temperature endurance
• Low dielectric constant for superior signal integrity
• Contacts: Beryllium copper alloy
STANDARDS AND SPECIFICATIONS
•
•
•
•
•
Product Specification: 108-2482
Application Specification: 114-32025
Instruction Sheet: 408-32046
Test Report: 501-134002
Electrical Performance Report: 505-116000
PAGE 3
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
CeeLok FAS-T - Differential Return Loss
0.0
-10.0
CeeLok FAS-T
Differential Return Loss
10 GbE (Cat 6a)
Channel Limit
1 GbE (Cat 5e)
Channel Limit
-20.0
Mag (dB)
-30.0
-40.0
-50.0
-60.0
-70.0
Four
3m
: 40M Total
2m
25 m
5m
5m
-80.0
0
50
100
150
200
250
300
Frequency (MHz)
350
400
450
500
CeeLok FAS-T - Differential NEXT
0.0
1 GbE (Cat 5e)
Channel Limit
-20.0
CeeLok FAS-T
Differential NEXT
10 GbE (Cat 6a)
Channel Limit
Mag (dB)
-40.0
-60.0
-80.0
-100.0
Four
3m
: 40M Total
2m
25 m
5m
5m
-120.0
0
50
100
150
200
250
300
350
400
450
500
Frequency (MHz)
CeeLok FAS-T - Differential Insertion Loss
CeeLok FAS-T
Differential Insertion Loss
0.0
-10.0
Mag (dB)
-20.0
1 GbE (Cat 5e)
Channel Limit
-30.0
10 GbE (Cat 6a)
Channel Limit
-40.0
-50.0
-60.0
0
50
100
150
200
250
300
350
400
450
500
Frequency (MHz)
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 4
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
Contacts
Contacts
Included
Type
Key
Black Zinc Nickel
N
2102353-1
2102353-2
A
2102353-3
2102353-4
B
2102353-5
2102353-6
N
2102353-7
2102353-8
A
2102353-9
1-2102353-0
1-2102354-2
None
B
1-2102353-1
N
2102352-1
2102352-2
A
2102352-3
2102352-4
2102352-6
Pin
Receptacle
B
2102352-5
N
2102352-7
2102352-8
A
2102352-9
1-2102352-0
1-2102352-2
None
B
1-2102352-1
N
2102343-1
2102343-2
A
2102343-3
2102343-4
2102343-6
Pin
B
2102343-5
N
2102343-7
2102343-8
None
A
2102343-9
1-2102343-0
B
1-2102343-1
1-2102343-2
Pin
N
2102453-1
2102453-2
Pin
A
2102453-3
2102453-4
2102453-6
Box-Mount
Receptacle
Box-Mount
Receptacle, PC Tail
Jam Nut
Receptacle, PC Tail
Part No.
Electroless Nickel
Socket
Plug
Part No.
Pin
B
2102453-5
Pin
N
2102351-1
2102351-2
Pin
A
2102351-3
2102351-4
Pin
B
2102351-5
2102351-6
Pin
Wire Size
24 – 26 AWG
Pin
Socket,
Hooded
2102349-3
2102350-5
Application Tooling
Hand Crimp Tool:
M22520/2-01
Crimp Positioner:
TE Part No. 2217375-1
Insertion/Extraction Tool:
TE Part No. 2217376-1
Socket
Ø .034
.140 Min.
Ø .050
Ø .047
Ø .047
Ø .051 Max.
Ø .034
Ø .020
Section B-B
.021 Min.
.175
.243
.250
.115
B
Ø .0210
.140
.175
.155
B
.087
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
Ø .021
PAGE 5
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
PRODUCT DIMENSIONS
Boxmount Receptacle Kit Assembly
Part No. 2102343
Recptacle Assembly
Plated Aluminum Shell
5
7
5
See Detail A
3
3
1
7
Detail A
Scale: 6:1
1
Pin Contact
(2102349-3)
1.350
.913
Ø .585
Ø .636
Red Full Mate Indicator
Jam Nut Receptacle Assembly, PC Tail
Part No. 2102351
.670
Master Key
.125
3
4
5 6
8 2 1
7
.850
Master Key
3X 4-40 UNF Thread
PCB Mount
Aluminum Shell
See Detail A
O-Ring
3
5
6
8
4
2
11/16" — 24 Thread
Detail A
Scale 5:1
Triple Start 5/8'
Modified Acme Thread
1
7
Jam Nut
TE1924_2102343_34% / Michael Douglas / 11-4-2013
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 6
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
PRODUCT DIMENSIONS
Receptacle Kit Assembly
Part No. 2102352
1.350
.670
5
5
.850
3
7
3
Detail A
Scale: 6:1
1
7
1
Pin Contacts
(2102349-3)
See Detail A
Red Full Mate Indicator
Ø .698 ±.005
Receptacle Assembly
Aluminum Shell
Jam Nut
11/16" — 24 Threads
.669 ±.002
O-Ring
Triple Start 5/8"
Modified Acme Thread
1/8" Max. Panel Thickness
Plug Kit Assembly
Socket Contact
(2102350-5)
Part No. 2102353
Plug Assembly
Aluminum Shell and Nut
3
1
5
7
TE1924_2102352_34% / Michael Douglas / 11-4-2013
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 7
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
PRODUCT DIMENSIONS
Boxmount Receptacle Assembly, PC Tail
Part No. 2102453
Front Insert: Qty. 1
Material: Black
Thermoplastic
Internal Snap Ring: Qty. 1
Material: Stainless Steel
Rear Insert: Qty. 1
Material: Black
Thermoplastic
Contact Pins: Qty. 8
Material: Gold Plated
Leaded Copper
5/8” Modified Triple
Start Acme Thread
Red Full Mate Indicator Band
.950
Master Key
.670
4X Ø .094
.723
3X 4-40 UNC
Board Mounting Holes
2X .362
.125
Receptacle: Qty. 1
Material: Aluminum
.723
.913
TE1924_2102453_48% / Michael Douglas / 11-4-2013
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 8
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
PRODUCT DIMENSIONS
Protective Cover Cap, Plug
Part No. 2221682-1
Rivet
Material: 300 Series Stainless Steel
Finish: Passivated
Rivet, Oval
Material: 300 Series Stainless Steel
Finish: Passivated
Protective Cover
Material: Aluminum
7.00
Ring
Material: Stainless Steel
Finish: Passivated
Lanyard
Material: Stainless Steel Wire
.047
Ø .555
Ø .685
Interfacial Seal
Material: Fluorosilicone Rubber
Protective Cover Cap, Receptacle
Part No. 2221478-x
Lanyard:
Material: Stainless Steel Wire
Protective Cover
Ratchet Style
Material: Aluminum
Part No. 2221478-1 (Nickel Finish)
Part No. 2221478-2 (Black Zinc Nickel Finish)
(7.000)
(Ø .840)
Ring
Material: 300 Series Stainless Steel
Finish: Passivated
(Ø .695)
Rivet
Material: 300 Series Stainless Steel
Finish: Passivated
Part No. 2221478-3 (Nickel Finish)
Part No. 2221478-4 (Black Zinc Nickel Finish)
(6.049)
(.047)
Protective Cover
Ratchet Style
Material: Aluminum
(Ø .142)
(Ø .260)
TE1924_2221682_40% / Michael Douglas / 11-4-2013
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
PAGE 9
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
ACCESSORIES
SolderSleeve Shield Terminators
Convenient and Effective
Environmental
•T
erminates a ground lead to cable
shield in order to ground the shield
• Simple, quick termination
• Available with and without pigtails
•O
perating temperature:
-55°C to +200˚C
• Environmentally sealed
• Mechanically robust
Versatile
Physical or Other Properties
•C
enter or end strip for ease
of termination
• Handles wide range of high
data rate cables and diameters
•T
erminates tin, silver and
nickel flat or round braids
•P
rovides 360° of shielding
Product Offering
•C
ontact TE for a complete listing
of SolderSleeve shield terminators
CRES-Lock Bandstraps
Easy to Use
Electrical
•Q
uick, easy, cost-effective
and reliable termination of
braided shielding
•O
perating Temperature:
-65°C to +200°C
•E
lectrical Resistance:
Meets ≤1.0 mΩ requirement
of AS85049/128
• Corrosion Resistance:
500 hr. salt spray
High Performance
•L
ow profile, one-piece design
eliminates EMI leakage paths
Rugged
•S
hock, vibration and environmental
tested to meet aerospace and
defense requirements
Mechanical
•T
ensile Strength: 200 lb.
•B
raid Retention: Meets 100 lb.
requirement of AS85049/128
Application Tooling
•M
icro Tie-Dex II, A30199
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
Description
Part No.
Bandstrap
BND-0812S
PAGE 10
CeeLok FAS-T Connectors
CeeLok FAS-T Connectors
ACCESSORIES
Heat-Shrinkable Molded Boots
Hazard Matched
Versatile
•D
ifferent materials to meet
different temperature and
environmental requirements
• Optional with pre-applied
adhesives for quick installation
and high-reliability IP67 sealing
• Epoxy sealing kits available
•S
ealing and strain relief to
the wires and cables
• Straight or 90 degree cable exit
Application Tooling
•H
L1910E or the HG-501A
ThermoGun heat gun and
appropriate hot air reflectors
Product Offering
Temperature
Range
Material
Adhesive
Lined
Size* mm
Flexible polyolefin
Yes
Flexible polyolefin
-55°C to 120°C
Fluid-resistant
elastomer
-55°C to 135°C
-55°C to 200°C
-20°C to 60°C
-75°C to 150°C
Descriptive Part No.
Straight
90°
24/10.4/5.6
202K121-4/42-0
222K121-4/42-0
Yes
30/14.2/5.9
202K132-4/42-0
222K132-4/42-0
Yes
30/14.2/5.9
202K132-25/86-0
222K132-25/86-0
Flexible polyolefin
No
30/14.2/5.9
202K132-4-0
222K132-4-0
Modified
fluoroelastomer
No
30/14.2/5.9
202K132-12-0
222K132-12-0
Fluid-resistant
elastomer
Yes
30/14.2/5.9
202K132-25/225-0
222K132-25/225-0
Fluid-resistant
elastomer
No
30/14.2/5.9
202K132-25-0
222K132-25-0
*Size = as-supplied diameter both ends/recovered diameter connector end/recovered diameter cable end.
High-Data-Rate Cables
Compact and Lightweight
Customizable
•T
hin-wall technology
for smaller, lighter cables
• 28 AWG to 22 AWG conductors
•C
ustomizable to meet missioncritical needs such as EMI, fluid
resistance, and flammability
•H
ybrid designs
•E
lectrical testing capability,
including skew and eye patterns
Versions for Common Protocols
•F
ast and Gigabit Ethernet in
Cat 5e and Quadrax configurations
• IEEE 1394
• USB
Rugged
•S
pecialized TE developed polymer
formulations designed to support
better mechanical and thermal
performance in harsh environments
• State-of-the-art FAA approved foam
dielectrics for better
signal transmission
• Ruggedized zero halogen jacket
for marine applications that
passes the rigorous military
standards for flammability
while meeting stringent smoke
and toxicity requirements
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
Robust
•O
perating temperature range
from -55°C to +200°C
•F
ull range of shielding options
for signal integrity
PAGE 11
CONNECT WITH US
We make it easy to connect with our experts and are ready to provide all the support you need.
Visit te.com/support to chat with a Product Information Specialist.
QUALITY STARTS WITH THE RIGHT APPLICATION TOOLING
Creating a quality crimp connection is essential to delivering high performance and reliability in extreme environments. From low
to high volume wire processing, TE has you covered with a full range of application tooling and a global field service team.
• View all application tooling
• Connect with our experts to find the right tool for your application
te.com/highspeed
AMP, AGASTAT, CeeLok FAS-T, CII, DEUTSCH, DRI, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO,
Raychem, Rochester, SEACON, SolderSleeve, ThermoGun, TE, TE Connectivity, and TE connectivity (logo) are
trademarks owned or licensed by TE Connectivity. All other logos, products and/or company names referred to
herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration
purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or
completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be
as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will
TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale,
use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine
the suitability of each such product for the specific application.
© 2021 TE Connectivity All Rights Reserved.
1-1773464-2 05/21
AEROSPACE, DEFENSE & MARINE / CeeLok FAS-T CONNECTORS
CeeLok FAS-T CONNECTORS
TE Connectivity
Aerospace, Defense & Marine
2900 Fulling Mill Road
Middletown, PA 17057
